SERVICE CENTERSERVICE CENTERFACILITIESFACILITIES

SERVICE CENTERSERVICE CENTER FACILITIESFACILITIES

2 CUT-TO-LENGTH LINES

SLITTING LINE

POLISHING LINE FOR COILS

POLISHING LINE FOR SHEETS

2 LASER CUTTING MACHINES

SHEAR

2 POLISHING LINES FOR ROUND TUBES

POLISHING LINE FOR SQUARE AND RECTANGULAR TUBES

CUT-TO-LENGTH LINE – CUT-TO-LENGTH LINE – No 1No 1

COILS

THICKNESS: 0.3- 3.0 mm

WIDTH: 380-1600 mm

WEIGHT: max 25 T

MILL EDGE

December 2005

SHEETS

LENGTH: 400- 6700 mm

WIDTH CORRECTION

TOLERANCES:

EN ISO 9445 – for cold rolled sheets,

EN ISO 9444 – for hot rolled sheets

CUT-TO-LENGTH LINE – No 2CUT-TO-LENGTH LINE – No 2

COILS

THICKNESS: 1.0 – 10.0 mm

WIDTH: 500 - 2150 mm

WEIGHT: max 30 T

no reduction of input coil width

SHEETS

LENGTH: 500 – 6,000 mm in “automatic mode” (automatic sheet discharge); 

  500 – 10,000 mm in “manual mode” (manual sheet discharge)

TOLERANCES:EN ISO 9445 – for cold rolled sheets,EN ISO 9444 – for hot rolled sheets

June 2012

SLITTING LINESLITTING LINEFEBRUARY

2008COILS

thickness: 0.3- 4.0 mm

width: 50 – 1600 mm

inside diameter of a coil: 508 or 610

mm

outside diameter of a coil: 2 000 mm

STRIPS• width - up to thickness 1.5 mm>18 mm; more than 1.5 mm>28 mm

• Outside and inside diameter – as above• Tolerances – EN ISO 9445

POLISHING LINE FOR COILS

WIDTH OF COILS – 300 -1600 mm

WEIGHT OF A COIL – max 20 ton

THICKNESS – 0.4 -2.0 mm

SPEED OF WORK – 25 m/min

SURFACE: dry brush, imitation of wet polish, duplo

APRIL 2009

POLISHING LINE FOR SHEETSPOLISHING LINE FOR SHEETS

DRY PROCESSING MACHINERY

2 GRINDING HEADS

3 SCOTCH BRITE HEADS

SHEET BY SHEET FEEDING SYSTEM

August 2003August 2003

SHEETS

THICKNESS: 0.5- 4.0 mm LENGTH: 6000 mm WIDTH: 1600 mm GRIT: 80,120,180,240,320,400, DB

2 LASER CUTTING MACHINES 2D2 LASER CUTTING MACHINES 2D TrumpfTrumpf

Thickness of sheets Stainless steel up to 15 mm

Aluminium up to 10 mm

Work table dimensions 1500 x 3000 mm

Tolerance – EN ISO 9013

MARCH 2010, FEBRUARY 2012MARCH 2010, FEBRUARY 2012

THICKNESS: 0.5 – 4.5 mm

WIDTH: up to 3100 mm

LENGTH: up to 6000 mm

TOLERANCES EN ISO 9445 – for cold rolled sheets,

EN ISO 9444 – for hot rolled sheets

SHEAR LVDSHEAR LVDFEBRUARY 2013FEBRUARY 2013

BENDING OF SHEETSBENDING OF SHEETS

LVD BENDING PRESS

Bending of stainless steel and aluminium sheets with thickness up to 8 mm*

Working length 3050 mm

220 tons pressing force

8-axis CNC positioning

Laser bend angle measurement

Table camber compensation CNC crowning

High quality machine tooling for stainless steel/aluminium sheets

*available depth thickness depends on overall workpiece dimensions

JANUARY 2015JANUARY 2015

• 8 POLISHING HEADS• DIAMETER OF TUBES - 10-168.3 mm• SPEED UP TO 12 m/min

2 POLISHING LINES FOR ROUND TUBES2 POLISHING LINES FOR ROUND TUBESJune 2007

POLISHING LINE FOR SQUARE AND RECTANGULAR TUBES, FLATBARS

SQUARE AND RECTANGULAR TUBESSQUARE AND RECTANGULAR TUBES

GRIT: 80,120,180,240,320,400,600,800,1000

POLISHING

SIZES SQUARE TUBES: from 20x20 to 120x120 mm

RECTANGULAR TUBES: from 20x10 to 80x120 mm

FLATBARSFLATBARS

THICKNESS – 6-20 mm

MAX WIDTH – 120 mm

Thank you for your Thank you for your attentionattention