© 2009 MEI Corporation
CO
MP
RE
SS
OR
S
274
1. Determine Type of Fitting on Compressor Head:HEAD TYPES• O-Ring 3/4" x 7/8"• Tube-O 1"-14• Rotalock, or• Flange
2. Determine Valve Needed:• #8 Discharge (low side)• #10 Suction (high side)
3. Determine Hose End Fitting Type:• Beadlock• Flare, or• O-Ring
4. Service Valve Port Locations and Type:• R12 Port 1/4" (7/16 -20 thread)• R134a Port 13mm used on Suction (high side)• R134a Port 16mm used on Discharge (low side)
5. Backseat Seat Type: Incorporates a valve which canbe set at three different positions to control A/C systemrefrigerant flow.
• Open• Mid-way, or• Closed
SERVICE VALVES1"-14 TUBE-O RING ............................. 276
3/4" x 7/8" O-RING TYPE ....................... 277
FLANGE ................................................ 276
FORD / FS SERIES ............................... 277
HEAD FITTING TYPES ......................... 275
ROTALOCK........................................... 276
Related ItemsAdapters......................................................... 282Assortments (caps, cores, retrofit) ................ 281Compressor Conversion Brackets ................ 286Compressor Gasket Kits ............................... 285Compressor Shaft Keys ................................ 285Pressure Relief Valves .................................. 279RetroFit Adapters and Fittings ...................... 282RetroFit Adapters w/Switch Port Mounts ...... 283Rotalock/Tube-O Seals ................................. 275Schrader Valve Cores ................................... 283Service Caps ................................................. 280Shaft Seal Kits ............................................... 284Tools and Service Items ................................ 477
Selecting the Correct Service Valves
COMPRESSOR — SERVICE VALVES Table of Contents
© 2009 MEI Corporation
CO
MP
RE
SS
OR
S
275
SERVICE VALVES — COMPRESSOR
3/4" x 7/8" O-RING FITTING 1" -14 TUBE-O RING FITTING
DIESEL KIKI, ICE, SANDEN, SELTEC, TAMA, ZEXEL
#83/4" -16
#107/8" -14
Uses: (1) #8 and (1) #10 O-Ring#8 Discharge use O-Ring #0013#10 Suction use O-Ring #0015
HorizontalVertical Vertical
HEAD FITTING TYPES
Typical Examples:
1" -14 1" -14
Uses: (2) #10 O-RingsDischarge use O-Ring #0015Suction use O-Ring #0015
Typical Example:
1" -14 Tube-O Service Valves areinterchangable, and can be used on bothupright or rotary type compressors.
ROTALOCKUses white teflon seal
1/2”(#8) x 5/8”(#10)
— #5576 —
T/CCI, YORK, BLISSFIELD/TECUMSEH STYLE
Typical Examples:
1" -14 TUBE-O RINGUses HNBR (green) O-Ring
#0015
FLANGEUses paper gasket or
square cut O-Ring
Typical Example:
#0126
TECHTIP
© 2009 MEI Corporation
CO
MP
RE
SS
OR
S
276
ROTALOCK HEAD w/TEFLON SEAL - CCI / YORK - TECUMSEH / BLISSFIELD COMPRESSORS ONLY
Rotalock Beadlock #8 - 5420 R12 1/4" (7/16 -20) Back
Rotalock Beadlock #10 - 5421 R12 1/4" (7/16 -20) Back
Rotalock Beadlock #8 - 5430 R134a 16mm (high side) Back
Rotalock Beadlock #10 - 5431 R134a 13mm (low side) Back
Rotalock Flare #8 3/4" 5448 R12 1/4" (7/16 -20) Back
Rotalock Flare #10 7/8" 5447 R12 1/4" (7/16 -20) Back
Rotalock Flare #8 3/4" 5508 R12 1/4" (7/16 -20) Side Backseat
Rotalock Flare #10 7/8" 5510 R12 1/4" (7/16 -20) Side Backseat
Rotalock O’Ring #8 3/4" 5408 R12 1/4" (7/16 -20) Side Backseat
Rotalock O’Ring #10 7/8" 5401 R12 1/4" (7/16 -20) Side Backseat
Rotalock O’Ring #8 3/4" 5449 R12 1/4" (7/16 -20) Back
Rotalock O’Ring #10 7/8" 5450 R12 1/4" (7/16 -20) Back
Rotalock O’Ring #8 3/4" 5511 R134a 16mm (high side) Back
Rotalock O’Ring #10 7/8" 5512 R134a 13mm (low side) Back
Rotalock O’Ring #8 3/4" 5515 R134a 16mm (high side) Top Backseat
Rotalock O’Ring #10 7/8" 5516 R134a 13mm (low side) Top Backseat
1"-14 TUBE-O’RING
Tube-O’Ring Beadlock #8 - 4320 R12 1/4" (7/16 -20) on tube Straight
Tube-O’Ring Beadlock #10 - 4321 R12 1/4" (7/16 -20) on tube Straight
Tube-O’Ring Beadlock #8 - 4324 R12 1/4" (7/16 -20) on tube 90°
Tube-O’Ring Beadlock #10 - 4325 R12 1/4" (7/16 -20) on tube 90°
Tube-O’Ring Beadlock #8 - 4522/S R134a 16mm (high side) on tube 45°
Tube-O’Ring Beadlock #10 - 4523/S R134a 13mm (low side) on tube 45°
Tube-O’Ring Beadlock #8 - 4524/S R134a 16mm (high side) on tube 90°
Tube-O’Ring Beadlock #10 - 4525/S R134a 13mm (low side) on tube 90°
Tube-O’Ring Beadlock #8 - 5422 R12 1/4" (7/16 -20) Back
Tube-O’Ring Beadlock #10 - 5423 R12 1/4" (7/16 -20) Back
Tube-O’Ring Beadlock #12 - 5424 R12 1/4" (7/16 -20) Back
Tube-O’Ring Beadlock #8 - 5432 R134a 16mm (high side) Back
Tube-O’Ring Beadlock #10 - 5433 R134a 13mm (low side) Back
Tube-O’Ring Beadlock #12 - 5434 R134a 13mm (low side) Back
Tube-O’Ring O’Ring #8 3/4" 5435 R12 w/o service port - Discharge
Tube-O’Ring O’Ring #10 7/8" 5436 R12 w/o service port - Suction
Tube-O’Ring Flare #8 3/4" 5427 R134a 16mm (high side) Back
Tube-O’Ring Flare #10 7/8" 5428 R134a 13mm (low side) Back
Tube-O’Ring O’Ring #8 3/4" 5418 R12 1/4" (7/16 -20) Top Backseat
Tube-O’Ring O’Ring #10 7/8" 5411 R12 1/4" (7/16 -20) Top Backseat
Tube-O’Ring O’Ring #8 3/4" 5451 R12 1/4" (7/16 -20) Back
Tube-O’Ring O’Ring #10 7/8" 5452 R12 1/4" (7/16 -20) Back
Tube-O’Ring O’Ring #8 3/4" 5521 (2) R12 1/4" (7/16 -20) Top-Back
Tube-O’Ring O’Ring #10 7/8" 5522 (2) R12 1/4" (7/16 -20) Top-Back
Tube-O’Ring O’Ring #8 3/4" 5513 R134a 16mm (high side) Back
Tube-O’Ring O’Ring #10 7/8" 5514 R134a 13mm (low side) Back
Tube-O’Ring O’Ring #8 3/4" 5517 R134a 16mm (high side) Top Backseat
Tube-O’Ring O’Ring #10 7/8" 5518 R134a 13mm (low side) Top Backseat
COMPRESSOR — SERVICE VALVES
Service Valve Specifications
COMPRESSOR HOSE END HOSE END PORT PORT PORTFITTING TYPE FITTING TYPE FITTING SIZE PART# TYPE DESCRIPTION LOCATION NOTES
NOTE: Also refer to AEROQUIP section for E-Z CLIP service valve types.
© 2009 MEI Corporation
CO
MP
RE
SS
OR
S
277
3/4" x 7/8" O’RING TYPE - DIESEL KIKI - ICE - SANDEN - SELTEC - ZEXEL COMPRESSORS
# 8 O’RING O’Ring #8 3/4" 5523 R12 1/4" (7/16 -20) Back
#10 O’RING O’Ring #10 7/8" 5524 R12 1/4" (7/16 -20) Back
# 8 O’RING O’Ring #8 3/4" 5519 R134a 16mm (high side) Back
#10 O’RING O’Ring #10 7/8" 5520 R134a 13mm (low side) Back
# 6 O’RING O’Ring #6 5/8" 5527 R134a 16mm (high side) Top In-line Adapter
# 8 O’RING O’Ring #8 3/4" 5528 R134a 16mm (high side) Top In-line Adapter
#10 O’RING O’Ring #10 7/8" 5529 R134a 13mm (low side) Top In-line Adapter
#12 O’RING O’Ring #12 11/16" 5530 R134a 13mm (low side) Top In-line Adapter
#6 O’Ring O’Ring #6 5/8" 5444 No Port N/A N/A 90° Adapter
#8 O’Ring O’Ring #8 3/4" 5445 No Port N/A N/A 90° Adapter
#10 O’Ring O’Ring #10 7/8" 5446 No Port N/A N/A 90° Adapter
FORD / NIPPONDENSO COMPRESSORS
#10 O’RING O’Ring #10 3/4" 5538 R134a 16mm (high side) Back TM31HD only
#12 O’RING O’Ring #12 7/8" 5539 No Port 13mm (low side) Side TM31HD only
COMPRESSOR HOSE END HOSE END PORT PORT PORTFITTING TYPE FITTING TYPE FITTING SIZE PART# TYPE DESCRIPTION LOCATION NOTES
SERVICE VALVES — COMPRESSORNOTE: Also refer to AEROQUIP section for E-Z CLIP service valve types.
Service Valves (Listed in ascending order by our part number)
(continued)
Tube-O’Ring CompressorR12 - SchraderBeadlock
Tube-O’Ring CompressorR12 - Schrader 90°Beadlock
Tube-O’Ring CompressorR134a Port 45°Beadlock
Tube-O’Ring CompressorR134a Port 90°Beadlock
4320 #8 Beadlock Discharge4321 #10 Beadlock Suction
4324 #8 Beadlock Discharge4325 #10 Beadlock Suction
5422 #8 Beadlock Discharge5423 #10 Beadlock Suction5424 #12 Beadlock Suction
5420 #8 Beadlock Discharge5421 #10 Beadlock Suction
5411 #10 O’Ring Discharge5418 #8 O’Ring Suction
5401 #10 O’Ring Discharge5408 #8 O’Ring Suction
Rotalock CompressorR12 - BackseatO’Ring Fitting
Tube-O’Ring CompressorR12 - BackseatO’Ring Fitting
Rotalock CompressorR12 - SchraderBeadlock
Tube-O’Ring CompressorR12 - SchraderBeadlock
4522 ...... alum4522S ... steel#8 BeadlockDischargew/16mm
4523 ...... alum4523S ... steel#10 BeadlockSuctionw/13mm
4524 ...... alum4524S ... steel#8 BeadlockDischargew/16mm
4525 ...... alum4525S ... steel#10 BeadlockSuctionw/13mm
© 2009 MEI Corporation
CO
MP
RE
SS
OR
S
278
5430 #8 BeadlockDischarge w/16mm
5431 #10 BeadlockSuction w/13mm
Tube-O’Ring CompressorR12 - SchraderO’Ring Fitting
COMPRESSOR — SERVICE VALVES
Rotalock CompressorR12 - BackseatFlare Fitting
5451 #8 O’Ring Discharge5452 #10 O’Ring Suction
5432 #8 Beadlock Discharge w/16mm
5433 #10 BeadlockSuction w/13mm
5434 #12 BeadlockSuction w/13mm
5508 #8 Flare Discharge5510 #10 Flare Suction
5511 #8 O’RingDischarge w/16mm
5512 #10 O’RingSuction w/13mm
Rotalock CompressorR134a Port- BackseatO’Ring Fitting
Tube-O’Ring CompressorR134a PortO’Ring Fitting
Rotalock CompressorR134a PortO’Ring Fitting
Rotalock CompressorR12 - SchraderFlare Fitting
Rotalock CompressorR12 - SchraderO’Ring Fitting
Rotalock CompressorR134a PortSteel Beadlock
Tube-O’Ring CompressorR134a PortFlare Fitting
5427 #8 FlareDischarge w/16mm
5428 #10 FlareSuction w/13mm
5447 #10 Flare Discharge5448 #8 Flare Suction
5449 #8 O’Ring Discharge5450 #10 O’Ring Suction
5513 #8 O’RingDischarge w/16mm
5514 #10 O’RingSuction w/13mm
Tube-O’Ring CompressorR134a PortSteel Beadlock
5515 #8 O’RingDischarge w/16mm
5516 #10 O’RingSuction w/13mm
Listed in ascending order by our part number (continued)
5517 #8 O’RingDischarge w/16mm
5518 #10 O’RingSuction w/13mm
Tube-O’Ring CompressorR134a Port - BackseatO’Ring Fitting
5444#6 5/8 -18 Female x 5/8 -18 Male5445#8 3/4 -16 Female x 3/4 -16 Male5446#10 7/8 -14 Female x 7/8 -14 Male
Diesel Kiki, ICE, Sanden, Seltec90° O’Ring Coupler
Adapts to Male Insert O’Ring
Seltec TM31HD - OnlySTD. Flow Ports
Seltec TM31HD - OnlySTD. Flow Ports
5439Suction - Low Side#12 Hose Fitting13mm Port Sizeuses #0115 o’ring
5438Discharge - High Side#10 Hose Fitting16mm Port Sizeuses #0115 o’ring
5435 #8 MIO - Discharge5436 #10 MIO - Suction
York/CCI/Tecumseh/SandenR12 w/Tube-O Type Compr.w/o Service Port
© 2009 MEI Corporation
CO
MP
RE
SS
OR
S
279
SERVICE VALVES — COMPRESSORListed in ascending order by our part number (continued)
5521 #8 O’Ring Discharge5522 #10 O’Ring Suction
5519 #8 O’RingDischarge w/16mm
5520 #10 O’RingSuction w/13mm
O’Ring Comp.R134a PortO’Ring Fitting
Tube-O’Ring Comp.R12 - SchraderO’Ring Fitting
Diesel Kiki, ICE,Sanden, SeltecO’Ring R134a Adapter
5527 #6 - #6 w/16mm5528 #8 - #8 w/16mm5529 #10 - #10 w/13mm5530 #12 - #12 w/13mm
5540Compressor AdapterConverts Tube-O comprto Rotalock compressor
5541Compressor AdapterConverts Rotalock comprto Tube-O compressor
TECH TIP:USE TO ADD A SERVICE PORTTO A ROTARY COMPRESSOR.
5542S #85543S #105544S #12GM A6 Service Vlv
5545SGM A6Hold Down Bracket
COMPRESSOR — PRESSURE RELIEF VALVES
5682Compressor Pop-Off Valvefor A6, R12, Frigidaire, GM.Bleeds off excessive R12pressure in excess of 425 p.s.i.
3/8”-24
5682MGM CompressorsBrass, Metric M10-1.25 threadw/HNBR O-ring.
M10 Metric
5683Compressor Pop-Off Valvefor CCI/York Style,Tecumsehand Ford FS6.Bleeds off excessive R12pressure in excess of 400 p.s.i.
3/8”-245684(R12 & R134a)Compressor Pop-Off Valvefor Seltec, York/Diesel-Kiki CHSeries. Bleeds off excessiverefrigerant pressure in excessof 400 p.s.i.
3/8”-24
5685(R12 & R134a) UniversalSeltec, GM HT6.
3/8”-24
5686Compressor Pop-Off Valvefor Sanden.Bleeds off at 500-600 p.s.i.
3/8”-24
5686ASanden New Style AluminumLow Profile w/HNBR O-ring.
3/8”-24
5687DENSO Metric M10-1.5 threadw/o O-ring.
M10 Metric
5523#8 O’Ring - Discharge5524#10 O’Ring - Suction
O’RingR12 - Schrader
TECH TIP:USE TO ADD A SERVICE PORTTO A ROTARY COMPRESSOR.
5542C #8 w/16mm port5543C #10 w/13mm portCaterpillar A6 Comp.Service Vlv
© 2009 MEI Corporation
CO
MP
RE
SS
OR
S
280
COMPRESSOR — SERVICE PARTS
Color:BlackBlue with L (Low Marking)
Applications:*Bridgeport Piedmont OEM R134a 13mm Port*Bridgeport Piedmont RetroFit 13mm Adapter*Refrigeration Sales R134a RetroFit 13mm Adapter
Color:Red
Applications:*Aeroquip OEM R134a 16mm Port*Aeroquip Piedmont RetroFit 16mm Adapter*Frig-C High Side R134a RetroFit Adapter
Color:Blue
Applications:*Aeroquip OEM R134a 13mm Port*Aeroquip Piedmont RetroFit 13mm Adapter*Frig-C Low Side R134a RetroFit Adapter
R134a Service Caps
553310 per box
553410 per box
558710 per box
558810 per box
557410 per box
557510 per box
557910 per box
558010 per box
Color:BlackRed with H (High Marking)
Applications:*Bridgeport Piedmont OEM R134a 16mm Port*Bridgeport Piedmont RetroFit 16mm Adapter*Refrigeration Sales R134a RetroFit 16mm Adapter
Color:Blue with L (Low Marking)
Applications:*Bridgeport Piedmont OEM R134a 13mm JRA Port
Color:Red with H (High Marking)
Applications:*Bridgeport Piedmont OEM R134a 16mm JRA Port
Color:Black
Applications:*Eaton OEM SSV High Flow R134a 13mm Port*Refrigeration Sales CCI Service Valve w/Eaton SSV High Flow 13mm Port
Color:Black
Applications:*Eaton OEM SSV High Flow R134a 16mm Port*Refrigeration Sales CCI Service Valve w/Eaton SSV High Flow 16mm Port
*Bridgeport Piedmont (Schrader Bridgeport) OEM ports are typically found on some GM and Ford Vehicles.*Eaton OEM ports are typically found on some heavy duty trucks and equipment and some Ford vehicles.*Aeroquip OEM ports are typically found on Chrysler, Ford heavy duty trucks, Navistar, John Deere, some GM & Ford vehicles, and numerous import vehicles.
Service Caps
55771"-14 Port Caps10 per box
5531 1/4"5532 3/16"10 per box
5581 #85582 #1010 per box
5578Backseat Service Valve Cap10 per box
Plastic Aluminum Port CapsSanden / Seltec
PlasticCCI / York- Tecumseh
Black Plastic
© 2009 MEI Corporation
CO
MP
RE
SS
OR
S
281
SERVICE PARTS — COMPRESSOR
Assortments - Caps, Cores, and RetroFit Components
8984Small Port Cap Kit
8977Complete Charging Port Cap Kit for R12/R134a
(10 ea.)1/4" Low
Side
(10 ea.)3/16" High
Side
(5 ea.)13mm
Round Blue
(5 ea.)14mm
Round Black
(5 ea.)16mm Hex
Red
(5 ea.)16mm Round
Black(5 ea.)
13mm HexBlue
(5 ea.)16mm Hex
Red
8987R134a Aluminum RetroFit Service KitComplete Kit includes everything needed to retrofit systems toR134a. Includes schrader core remover, port eliminator caps,aluminum retro charging adaptors and retrofit labels.
8991R134a Steel RetroFit Starter Assortment KitComplete steel fitting assortment, including retrofit labels,schrader cores and port eliminator caps.
8992R12/R134a Service Cap Kit
(5 ea.)1/4" Low Side
(5 ea.)3/16" High Side
(5 ea.)13MM Round
Blue
(5 ea.)16MM Hex
Red
8916
8919
5563 5564 5565
5556
5555
8914 8915 8889
55555557 5556 5563
55865585
8914
8915 5557
8978R134a Valve Core Repair Assortment Kit
(3 ea.)
(10 ea.)
(2 ea.)
(3 ea.) (1 ea.)
8916 5552
89148915 8919
8938R12/R134a Schrader Valve Core Kit
8915 8916 8914 8925 89265580 5534 5579
5533
5579 5578
55345533
558055755574
55315532
55885587
8889
55855586
5575
5574
5532
5531
5532
5575557455318955
Volvo M8High FlowSchrader
Valve Core
8986Multi-Refrigerant Schrader & Port Cap KitA full assortment of schrader valves and charging caps.
5554
5532
55885534
8916891555875533
55788914
(10 per) (2 per) (2 per) (2 per) (2 per) (2 per)
© 2009 MEI Corporation
CO
MP
RE
SS
OR
S
282
COMPRESSOR — SERVICE PARTS
RetroFit Charging Adapters and Fittings
Remove & DiscardR12 Caps &Valve Cores
R12ServicePorts
Screw On NewR134a RetroFit Adapters
R12ServicePorts
When retrofitting R12 systems to R134a, these fittings attach directly over the old R12 charging ports.Includes threadlock to prevent removal and new R134a schrader valve.
5550SWeld-on Steel M10 port
5552Primary Seal FittingMale Thread-16mm x 1.5
Aluminum
5553Low Side Primary SealFemale Thread-10mm x 1.25
Aluminum Steel
55551/4" (7/16" -20) to 16mm, red capIncludes Valve Core, NeopreneO'Ring and Threadlock.
red cap(high side)
55581/4" (7/16" -20) to16mm, red capIncludes Valve Core, NeopreneO'Ring and Threadlock.
Steel
red cap(high side)
5563 16mmGM Primary RetroFit AdapterMale Thread-12mm x 1.5
Aluminum
5564 13mm (1/4")5565 16mm (3/16")OEM Hi Flow PortIncludes Valve Core and Cap
Aluminum
55561/4" (7/16" -20) to 13mm, blue capIncludes Valve Core, NeopreneO'Ring and Threadlock.
Steel
blue cap(low side)
55591/4" (7/16" -20) to 13mm, blue capIncludes Valve Core, NeopreneO'Ring and Threadlock.
Steel
blue cap(low side)
Weld on RetroFit Fittings5583 13mm5584 16mmIncludes Valve Core and Cap
Steel
55573/16" (3/8" -24) to 16mm, red capIncludes Valve Core, NeopreneO'Ring and Threadlock.(Notch in nut designates 3/8")
Steel
red cap(high side)
55603/16" (3/8" -24) to 16mm, red capIncludes Valve Core, NeopreneO'Ring and Threadlock.(Notch in nut designates 3/8")
Steel
red cap(high side)
© 2009 MEI Corporation
CO
MP
RE
SS
OR
S
283
8955 (3 ea.)
(10 ea.)
8916
8915
SERVICE PARTS — COMPRESSOR
RetroFit Adapters with Switch Port Mounts
5567Includes Cap, Valve Core,Neoprene O'Ring & Threadlock(Notch in nut designates 3/8")
5568Includes Cap, Valve Core,Neoprene O'Ring & Threadlock
5570Includes Cap, Valve Core,Neoprene O'Ring & Threadlock(Notch in nut designates 3/8")
5571Includes Cap, Valve Core,Neoprene O'Ring & Threadlock(Notch in nut designates 3/8")
5572Includes Cap, Valve Core,Neoprene O'Ring & Threadlock
5573Includes Cap, Valve Core,Neoprene O'Ring & Threadlock
SteelSteel
SteelSteel
SteelSteel
3/8 -24Female
Switch Port
16mmPort
w/RedCap
3/8 -24(3/16")
7/16 -20Male
Switch Port16mmPort
w/RedCap
7/16 -20(1/4")
M10Metric MaleSwitch Port16mm
Portw/RedCap
3/8 -24(3/16")
M12Metric MaleSwitch Port16mm
Portw/RedCap
3/8 -24(3/16")
#6 MaleO'ringFitting
#6 FemaleO'ring Fitting 7/16 -20 (1/4") Male
Switch Port
3/8 -24 FemaleSwitch Port
#8 MaleO'ringFitting
#8 FemaleO'ring Fitting 7/16 -20 (1/4") Male
Switch Port
3/8 -24 FemaleSwitch Port
SCHRADER VALVE CORESNOTE: For Schrader valve service tools and kit, see section: Tools and Service Items.
8914GM High FlowLarge Bore Valve Core10 per box
8915Replacement Valve CoreStandard 1/4" Serv PortR12/R134a - 10 per box
8916Valve Core - M6R134a Hi-Flow JRA10 per box
8925Eaton 13mm SSV - M8High Flow High Side10 per box
8926Eaton 16mm SSV - M10High Flow Low Side10 per box
8938R12/R134a Schrader Valve Core Kit
8978R134a Valve Core Repair Assortment Kit
(2 ea.)
(3 ea.) (1 ea.)
5552
8914 8919
8915 8916 8914 8925 8926
8955VOLVO - M8High Flow, High Side10 per box
Volvo M8High FlowSchrader
Valve Core
(10 ea.) (2 ea.) (2 ea.) (2 ea.) (2 ea.) (2 ea.)
© 2009 MEI Corporation
CO
MP
RE
SS
OR
S
284
COMPRESSOR — SERVICE PARTS
Shaft Seal Kits
5495Seltec/TAMA/ Valeo Compr.TM08-TM16 Shaft Seal Kit
5496Ford FX15 CompressorShaft Seal Kit
5497Sanden CompressorSD508 & SD510 Shaft Seal Kit
5494Ford FS6 CompressorShaft Seal Kit
5490Tecumseh CompressorHG Model Shaft Seal Kit
5493GM A6 & R4 CompressorShaft Seal Kit - Ceramic
5492Tecumseh/York CompressorShaft Seal KitSmall Plate, 6 Bolts, 3/8" Heads
5491T/CCI, York CompressorShaft Seal KitLarge Plate, 6 Bolts, 1/4" Heads
5498Sanden CompressorSD708 & SD709 Shaft Seal Kit
5487Sanden Compressor5H14 & 7H15 Shaft Seal Kit
5488GM DA6 CompressorShaft Seal Kit
5489GM V5 CompressorShaft Seal Kit
5486York Style - Heavy, Standard Duty, and Mini Compressor ModelsAll Refrigerant Capability Deluxe Shaft Seal KitKit includes: Centering tool for proper plate orientation, Felt ring forimproved dust protection and oil wick control and Clutch coilreplacement anti-vibration "Super-Screws."
5545CLUTCH SNAP RING KIT - 7H15
© 2009 MEI Corporation
CO
MP
RE
SS
OR
S
285
Compressor Gasket Kits
5671Sanden 505,507,508,510,5H14
5670Ford Nippondenso FS-6
5679Zexel CH Series Diesel Kiki
5678Zexel BH Diesel Kiki
5673T/CCI, York 206,209,210
5672Sanden 708,709,7H15
5677GM DA-6,HR-6
5676GM R-4
5675GM A-6
5674Tecumseh HG850,1000
5681GM V5
SERVICE PARTS — COMPRESSOR
Compressor Shaft Keys
5539Ford/Nippondenso10 per box
5536GM A6/R410 per box
5537Sanden/Sankyo10 per box
5538T/CCI, York-Tecumseh10 per box
5535Seltec10 per box
© 2009 MEI Corporation
CO
MP
RE
SS
OR
S
286
COMPRESSOR — SERVICE PARTS
5500Conversion Bracket - CAT 3406BReplace round A/C compressor to CCI two cylindercompressor on 1984 to present Kenworth & 1988 topresent Freightliner Conv. with 3406B caterpillar engine.Mounts replacement compressor in vertical position.
Use clutch:#5044 std. duty#5144 heavy duty w/diode & weatherpak.
5501Conversion Bracket - CUMMINS NTC & N14 Third Groove DriveReplace round A/C compressor to CCI two cylinder on 1986 to presentT400-800 Kenworth, Peterbilt COE & Conv., Freightliner Conv., and 1984to present Volvo Class 8-9; all with Cummins NTC engine driving thecompressor from the accessory drive third groove.
Use clutch:#5044 std. duty#5144 heavy duty w/diode & weatherpak.
5502Conversion Bracket - CUMMINS NTC & N14 Front Groove DriveReplace round A/C compressor to CCI two cylinder on 1984 to presentK100 & W900 Kenworth; 1985-88 Freightliner COE & Conv., all withCummins NTC & N14 engine driving the compressor from the accessorydrive front groove.
Use clutch:KW, Freightliner#5044 std. duty#5144 heavy duty w/diode & weatherpak.
Peterbilt#5031
5503Conversion Bracket - DETROIT DIESEL SERIES 60Replace round A/C compressor to CCI two cylinder on mostvehicles with Detroit Diesel Series 60 engines. The compressor isdriven by the accessory drive belts which also drives the alternator.
Use clutch:#5044 std. duty#5144 heavy duty w/diode & weatherpak.
Compressor Conversion Brackets - Rotary To Upright
3/8 Lockwasher
3/8 x 1 Bolts (6)
Torque to
20 FT-LBS
Use existing
bolts & nuts (4)
to attach to engine
Torque to
30 FT-LBS
© 2009 MEI Corporation
CO
MP
RE
SS
OR
S
287
5504Conversion Bracket - CUMMINS L10 & M11Replace round A/C compressor to CCI two cylinder on mostmodels equipped with Cummins L10 / M11 Engines. Thecompressor mounts on the left side of the engineand is driven by the accessory drive pulley.
Use clutch:#5044 std. duty#5144 heavy duty w/diode & weatherpak.
5505Conversion Bracket - CAT 3406BReplace round A/C compressor to CCI two cylinder on 1986 topresent Peterbilt &1985 to present Freightliner with 3406Bcaterpillar engine. Mounts replacement compressorin horizontal position.
Use clutch:#5044 std. duty#5144 heavy duty w/diode & weatherpak.
5623Conversion Kit - Tecumseh/T/CCI , YorkStyle to Sanden/SeltecAdjustable compressor bracket fits mostTecumseh/York compressor mounts.Converts system to Kiki/Sanden standardmount compressors.
Compressor Conversion Brackets - Upright To Rotary
Compressor Conversion Brackets - Rotary To Upright
SERVICE PARTS — COMPRESSOR
5509Universal Bracket Kit - SandenCompressor Adapter Bracket - used formounting compressors for different (notcommon) types of engine applications.
5623WWeldable Bracket(Slots on bottom of plate do not matchside of T/CCI compressor mounting holes.)
Adapter KitT/CCI, York Style/Tecumsehto Sanden/Diesel -KIKIAdapts to most T/CCI, York & Tecumsehcompressor mounts. Converts system toSanden or Diesel Kiki standard mountcompressors.
5633H4” High Rise BracketNon-adjustable bracket.
5633Conversion Kit - Tecumseh/T/CCI, YorkStyle to Sanden/SeltecFixed compressor bracket fits mostTecumseh/York compressor mounts.Converts system to Kiki/Sanden standardmount compressors.