Services - Al Arabiya Laboratoriesalarabiyalabs.com/wp-content/uploads/2013/08/profile.pdf ·...

AL ARABIYA LABORATORIES GEOTECHNICAL & MATERIALS TESTING

COMPANY PROFILE July, 2012

Presented for: Imperial Trading & Contracting Company (ITCC) Project Name : Rayyan Palace

P.O. Box 38364, Doha - Qatar, E-Mail: [email protected]

Telephone: +974 4460 6103, Fax: +974 4464 5794

Company Profile-2012, Rev0

Table of Contents

1. Introduction

2. Quality Control

3. Scope of Services

4. HSE Policy

5. List of our Tests

6. Organization Chart

7. Key Personnel

8. Equipments, Tools & Machines

9. Reference List of our Projects

10. Certificates & Approvals

Introduction

2

Al Arabiya Laboratories for Geotechnical and Materials Testing (AAL) had started its business in Qatar since 2005, by providing engineering services in the fields of geotechnical studies, construction material testing, special engineering testing & inspection, and technical consultancy. AAL is extending its developing experience in these fields through its affiliation with MAS Center for Engineering Tests-Jordan established in 1992, specialized in the fields of geological & geotechnical investigation, and construction material testing for soil, aggregate, concrete, asphalt, and pipes. AAL vision is to maintain and improve its leading position as testing laboratory whose reputation is built on the ability to completely satisfy customers by providing them high quality services. As specialists in their respective fields, its team of professionals are dedicated to a standard of excellence for quality and performance, through continuous development, and built-up knowledge. AAL mission at all times, it is the Company’s intention to conduct its operations in a fair, ethical and professional manner, which reflects excellence in every aspect of its business. Being committed to the highest standards of integrity and performance, its target is to maintain market superiority of quality services, continuous improvement and strategic alliances with key consultants.

AAL inspired by values, driven by vision. quality is what AAL deliver, reliability is what you get.

Introduction

3

AAL philosophy is to be committed to meeting its fundamental obligations to employees, customers, and suppliers. This commitment is based on four fundamental precepts stating that it will:

Maintain and enforce high standards of ethical conduct, as relationships will be based on honesty, trust, fairness, and respect. Operations will be conducted in accordance with legal and regulatory requirements and in an environmentally responsible manner. Community needs will be met proactively and responsibly.

Maintain a strong “quality work environment” and demonstrate care for every employee by treating him fairly and with respect. Employees will be offered competitive wages and benefits, good working conditions and rewards for success. Workplace diversity will be supported as a corporate priority. Communications with employees will be clear, direct and timely. Teamwork and collaboration, learning and personal growth will be encouraged. Promotion from within will be practiced whenever possible.

Attract and retain customers with services of consistently superior quality and value, as customer needs will drive its efforts to win more contracts in the marketplace with superior services and a competitively-advantaged technical support.

Maintain a prudent, results-oriented approach to business that builds superior relationship value over the long-term. As discipline, focus, personal accountability and a passion for succeeding will be encouraged and rewarded. Challenging business objectives will be set to ensure a steady rate of real growth, while maintaining the financial strength of the company. Profitable growth will be pursued while maintaining excellence in our existing business. Growth opportunities will be sought actively within and outside the company in areas which capitalize on AAL immense strengths. Positions of market leadership will be pursued.

mailto:[email protected]

Introduction

4

Name of Laboratory : Al Arabiya Laboratories Commercial Registration : 46512/1 Nature of Business : Geotechnical & Construction Materials Testing Laboratory Location : Industrial Area, Street 13, behind Labour Dept, Gate 176 Telephone : +974 44645572 / 44606103 Fax : +974 44645794 / 44154575 Email : [email protected] Website : www.daratprojects.com P.O. Box : 38364 Doha, Qatar

Introduction 5

Al Arabiya Laboratories Location Map

10 R / A

10

R / A

15 Labor Office Industrial Area

15 R / A

Al Arabiya Laboratories Street No 13, Gate No 176

Stre

et N

o 13

Holyday Corner

Petro

l Sta

tion

Quality Control 2

QUALITY POLICY

AAL is committed to meeting customer requirements and enhancing customer satisfaction through continual improvement

of its services along with the quality management system. To achieve this policy, the following have been established and complied:

Identifying customer requirements, fulfilling his needs by providing him excellent services from highly motivated team.

Adopting professional laboratory practices, knowledge-based methods, and updated calibration schemes to ensure high precision and accuracy.

Performing efficient testing to deliver accurate results reported on-time and

whenever expected.

Maintaining all testing equipments, machines, tools, and working area in the highest level of acceptable conditions.

Recruiting qualified and dedicated personnel, whilst improving their skills

through continuous advance training.

Identifying weaknesses in the process system, eliminating the causes, and conducting internal audit programs whilst proceeding proactively.

Addressing customer satisfaction through the effective application of the quality management system, including continual improvement and the prevention of nonconformity.

AL ARABIYA LABORATORIES QUALITY CONTROL MANUAL

TITLE : GENERAL SECTION 0 CHAPTER 0

DATA FLOW DIAGRAM- Company Wide -

Clients, Customers

Quality Assurance Certification Bodies

StandardsBS EN, ASTM,

AASHTO, ACI, DINAuditors

Equipment Suppliers

Official Authorities

AL ARABIYA LABORATORIES

(AAL)

Sales Transactions

Calibrations

Financial Inspection

Information & Specifications

Supply Transaction

Approvals

Quality Control 3

AL ARABIYA LABORATORIES QUALITY CONTROL MANUALTITLE : GENERAL SECTION 0 CHAPTER 0

Cus

t.In

fo

Sta

ff in

form

atio

n

Pur

chas

e R

eque

st

DATA FLOW DIAGRAM- GENERAL -

Machinery & Tools

Monitoring Testing & Inspection

Official Authorities

Customers

Financial Management

Mai

nten

ance

repo

rt

Qua

lity

Con

trol d

ata

Ope

ratio

n D

ata

Working Tools Data Store

SuppliersData Store

Spa

re p

arts

re

ques

t

Finished Testing Reports

Testing Reports Data

Testing Plan

Finished Reports Data Store

Suppliers

Pur

chas

e Tr

ansa

ctio

ns

Pay

men

t Administration Management

Monitoring of Marketing & Sales

Quality Control

CustomerData Store

StandardsBS, ASTM, AASHTO, ACI, DIN

Invoicing Data

Information

Sam

ples

Sta

tistic

s

Rep

orts

Tra

nsac

tions

Test

ing

Req

uesi

tions

Cus

t. P

aym

ent

Quality Control 4

AL ARABIYA LABORATORIES QUALITY CONTROL MANUALTITLE : GENERAL SECTION 0 CHAPTER 0

DATA FLOW DIAGRAM- Testing Control -

Financial Management

Monitoring of Marketing &

Sales

Quality Control

Maintenance

Monitoring & Controling

Testing

Equipment & Machinery

Consumables Data Store

Con

sum

able

s D

ata

Pur

chas

e R

eque

st

Con

sum

able

s D

ata Testing Data

Finished Reports Data

Finished Reports Data Store

Consumable Request

Maintenance Request

Quality Control Data

Testing Plan

Finished Testing Reports

Mai

nten

ance

R

eque

st

Quality Control 5

AL ARABIYA LABORATORIES QUALITY CONTROL MANUALTITLE : QUALITY MASTER PLAN SECTION 0 CHAPTER 0

QUALITY MANAGEMENT SYSTEM

Management Responsibility

Quality System

Documents & Data Control

Quality Policy

General

Contracts or Orders

Design Control

Purchasing

Control of Customer -Testing Request

Testing Identification & Traceability

Operations Control

Inspection & Testing

Control of Inspection Tools and Testing

Equipments

Corrective & Preventive action

Data Submission

Control of Quality records

Training

Servicing

Internal Quality audits

Statistical Techniques

Management ReviewOrganization

Quality Procedures Quality Planning

General Review Amendement Records

GeneralApproval &

IssuingDocuments & Data changes

General Evaluation DataVerification of

Purchased Equipments

General Receiving In Process Final Report Records

General Control Procedure

Inspection & Testing Status

Control of Non- Confroming Results

Review & Conclusion of Non- Conforming ResultsGeneral

Corrective ActionGeneral Preventive Action

ProceduresIdentification of Need

Quality Control 6


TEST METHODS OF CONSTRUCTION MATERIAL, EXAMPLE: CONCRETE

3 - Moisture movement Which is the difference between the constant length of a specimen when dreid, and its length when subsequently saturated with ware.

1 - Initial Drying Shrinkage Which is the difference between the length of a moulded and cured specimen ( under specified conditions ) and its final (constant) length when dried.

2 - Drying Shrinkage Which is the difference between the length of a matured specimen cut from concrete and saturated and its final (constant) length when dried.

SamplingBS EN 12350-1

Mix Designs

Fresh

Calculation Ram Method

Consistency & Workability

Air entrainment & Density

SlumpBS EN 12350-2

Type (B) Method

Alcohol Method

Mixing Equipment

Cube Moulds

Vibrating table

Setting time

Preparation

Shape & DimensionBS EN 12390-1

StrengthBS EN 12390-3

Shrinkage & movement

* not frequent

Hard

CurringBS EN 12390

NOTES :

or

Quality Control 7


MATERIAL QUALITY CONTROL PLAN, EXAMPLE: CONCRETE BATCHING PLANT

BS EN 196/ASTM C191

Manufacturer's Weekly testing

BS 5075 Certified Product

Daily in-housesieve analysis

testingBS EN 933

3rd Party on Regular interval

Months TDS, PH Sulphate,

Chloride, Carbonate, Bicarbonate, Organic,

Matter etc.,APHA/AWWA 21st

Edition 2005

Admixture Cement

Aggregate / sandSampling

BS EN 12620Water

S.G & Water AbsorptionSulphate

Choride contentEvery 1 - 2 weeks

Testing BS EN 1097 - 6

Flakiness Index And Elongation IndexWeekly testing BS EN 933 -3

Moisture content of fine Aggregate & sand twice daily

Mortar setting time test for

each new mix & once monthly

for allBS EN 196-3

3rd Party Test Every 2-3 months

Clay lumps & Friable particles,

Organic impurties, Soundess, sand Equivalent, Los

Angeles Abrasion, Potential AlkaliReactivity, etc. BS EN Standard

BatchingQuality Control 8


Equipment & PlantsCalibration

Weighing Scales,Admixture dispenserscompression machine

Batching Plants,Weighing Scales,Tested by Danway

Fresh Concrete

BS EN 12350-2

Testing

on each load

time / monthConcrete penetration

Slump & Temp. checkingon each type of mix

producedTemp. Checking on temp.

controlled concreteSetting time testing 1-2

testAir Content

Hardened conretetesting

Cube strengthTest for 7 & 28 daysin - house checkingStatistical analysis

Every 40 setsBS EN 12390-1,3,&7

Durability test for hardened

BS EN 12390 PART-8-20003rd party 3 months or special mixes

concreteISAT - Absorption test

1881 -208every 3 months - 3rd party or

Chloride permeabilityAASHTO T - 277 ( ASTM C1202/97)

In-house testing 3 months or special mixes

Slump & Temp. Check

Daily : Visual Inspection

30 min Absorption testBS1881 - 122 Monthly In-house

testing

for special mixes

Water permeability

PRODUCTION QUALITY CONTROL PLAN, EXAMPLE: CONCRETE BATCHING PLANT

Finished Product

Quality Control 9


OPERATIONAL DIAGRAM for CONCRETE BATCHING PLANTS

Quality Testing

Perscriptive requirements to be

reduced and eliminated

Designed Mix

Aggregate Sampling

BS EN 12620

Rapid changing of material and proportioning, as a result and response to - varying material- weather- job conditions- acceptance testing procedures used forDispatching

MaterialWater Cement Aggregate Admixture

MaterialWater

BS 3148C109/191

CementBS 12

AggBS 882

AdmixtureASTM C

494

Trial MixesBS 5328

PrescribedMix

Production Process

TestingFresh Hardened

Production ProcessBS 5328

InspectionBS 1881

Site TestingBS 1881

Storage

Sampling

Quality Assurance

Acceptance Non Acceptance

Reports

Follow up

Non Compliance

Recycled Plant

Compliance

Accounting

Collection

Quality Control

Quality Control 10

Scope of services

2

Al Arabiya Laboratories

Services provided: Construction Materials Specification, Preparation, Consulting Review and

Editing Construction Monitoring Foundation Evaluation Installation and Monitoring of Shallow and Deep Foundations Materials Testing (Earthwork, Asphalt, Concrete and Pavement) Materials Evaluation & Certification Non-destructive Testing On-site Sampling & Laboratory Testing of Construction Materials Quality Assurance & Quality Control Non nuclear Density Gauge for Soil & Asphalt Testing

Aggregates Aggregate testing plays an important role in assessing new material sources, in situ behavior, compliance and quality control.

All aggregate testing is undertaken by Qatar experienced technical staff operating from our well equipped Al Arabiya accredited laboratories.

In line with British Standards we provide mechanical, physical and chemical testing on a wide range of primary and secondary (recycled) aggregates to ensure they are fit for purpose.

Our services ensure compliance for all materials used in the construction industry, testing to earthworks standards – BS 1377 and Specification for Highways Works and aggregate standards BS EN 13242, BS EN 13043, BS EN 13139, and BS EN 12620.

Scope of services

3

These include:

Testing of Aggregate Properties

As a vital and wide ranging element of construction it is important to accurately evaluate all aggregate characteristics whether used as sub-base or capping material or for more specialized purposes such as track ballast, backfill and many more. Soil Mechanics aggregate tests include valuable information about:

Concrete With fully equipped field teams covering the Qatar is able to provide a comprehensive testing service to prove the quality of fresh and hardened concrete. This encompasses Al Arabiya accredited on-site manufacture of cubes, workability and air content testing and laboratory tests to determine compressive strength and density.

Our services include:

Fresh Concrete Testing

Soil Mechanics provide highly skilled technicians to carry out the on-site sampling and making of concrete test cubes which are cured and tested in strict accordance with British Standards at our Al Arabiya Accredited Laboratories.

On-site AAL accredited service for sampling fresh concrete On-site AAL accredited service for workability testing of fresh concrete On-site AAL accredited service for air content testing of fresh concrete On-site AAL accredited service for cube making

Hardened Concrete Testing

Laboratory storage, curing and testing Compressive strength of concrete cube Compressive strength of concrete core Carbonation depth on core Chloride content analysis Sulphate content analysis Analysis of hardened concrete

http://www.esg.co.uk/about-us/accredited-services/#UKAS

Scope of services

4

Concrete Cube Collection Service

AAL provides a concrete cube collection service. All cubes are appropriately cured in readiness for testing.

Cube Mould Hire Service

We hire out cube moulds, thermostatically controlled curing tanks and other associated equipment to enable customers to make their own concrete cubes.

Concrete Investigations

For bridge assessments and condition surveys we offer a complete investigation service using qualified in-house expertise to efficiently and effectively identify all types of reinforced (and mass) concrete deterioration. We undertake both visual inspections and non-destructive testing including:

Investigating the corrosion of reinforcements Analysing the cover and depth of carbonation, frost and environmental damage, water

penetration/dampness Petrography studies Cover meter surveys Half cell surveys Resistivity surveys Ground Penetrating Radar (GPR) surveys Thermo graphic imaging Vibration monitoring Ultrasonic testing Tapping survey

On-site Sampling and Inspection

Our safe and accurate methods for the on-site sampling of both freshly poured and hardened concrete include:

Coring Bulk sampling.

Scope of services

5

Chemical Analysis of Concrete

Chemical analysis of concrete is undertaken at one of three QTAR based material testing laboratories which provide valuable information regarding the cause(s) of failure of concrete. Our testing programmers are used to analyses:

Chloride content Concentrations of major cement constituents i.e. calcium, silica, magnesium, iron,

aluminum Sulphate content Presence of high alumina cement Alkali content (sodium and potassium ions)

Asphalt Testing Covering a wide range of road and pavement base materials, our bituminous testing services are widely used for checking the quality of products and their placement as well as investigating specific problem areas. These encompass high quality in situ sampling and in-house laboratory testing to ascertain the following parameters:

Compositional analyses Density of cores, maximum density, refusal density and air voids ITSM (Indirect Tensile Stiffness Modulus), VRLAT (Vacuum Repeated Load Axial

Test) data and wheel tracking Viscosity and water content of bitumen emulsion Vial it cohesion Road core drilling and logging data (www.daratprojects.com) Recovery of binder from mixed material information The penetration and softening point Effective tar identification and testing results.

Non nuclear Density Gauge for Soil & Asphalt Testing

Scope of services

6

CCTV Pipeline Inspection

We offer a complete CCTV survey configuration that includes camera and control system with full video reporting facility. We do provide inspection in pipe sizes ranging from 100mm up to 1500mm. We are adopting latest reporting technology to generate reports suiting our client’s own special requirements, giving him clear representation of the pipeline status, presented in a CD to provide him with an easy-to-access form of document storage.

Surveying Services

To provide our clients professional land surveying services, we are using state of the art total stations for seamless electronic gathering of survey data. Additionally, we also have the most current/advanced survey grade GPS equipment for fast and accurate positioning. Our services cover site planning survey combining the boundary and topographic surveys.

AAL Health, Safety, and Environmental Policy

AAL is committed to provide a healthy and safe workplace for all people at each work location and to protect the environment in accordance with applicable laws and the in-house HSE Policy. Our commitment is based on the conviction that most accidents are preventable, and that it is the responsibility of each and every employee to ensure that we practice safety as a routine part of our daily work. In order to achieve this objective, we will identify HSE risks arising from our activities and reduce them to as low as is reasonably practicable.

Health, Safety, and Environmental HSE responsibilities are integrated in the way in which AAL conducts its business. Successfully managing HSE issues is an essential component of our business strategy. Through observance and encouragement of this Policy, we assist in protecting the environment and the overall well being of all our stakeholders, our employees, clients & subcontractors.

AAL management will continue to take a proactive approach towards creating safe working environments for all employees and will be accountable for promoting continued safety education and training for all employees, assigning responsibility for all aspects of the HSE Policy, continuously reviewing potential areas of improvement, and ensuring thorough evaluations of all incidents.

AAL will continue to address the environmental and health impact of our operations by reducing waste, emissions, and discharges and by using energy efficiently. AAL HSE Program may be revised from time to time. This Program is not a one-time plan, but is a dynamic program that is always being improved.

AAL will facilitate implementation of the HSE Policy by having a Management System. This System aims at continual improvement of HSE performance through definition of roles and responsibilities at all levels in the organization and an efficient communication structure. This HSE Management System is consistent with the AAL business principles whereby operating companies handle their operations in accordance with instructions and guidance from AAL.

In this way we aim to foster an HSE performance we can be proud of, to earn the confidence of customers, shareholders and society at large and to enable sustained growth and development.

Najeeb M Ashour Managing Director

HSE 1

Structure of the AAL HSE Management System The structure of the AAL HSE Management System is shown in the figure below.

Figure: Structure of the AAL HSE Management System Four levels of HSE Management are distinguished within the AAL system:

LEVEL 1: CORPORATE

At this level the vision, policy, principles and corporate standards reside. LEVEL 2: OPERATING COMPANY

At this level externally certified HSE Management Systems are developed and implemented. These assist operating companies (OpCo) to translate the general requirements of AAL into detailed and practical procedures conforming to country specific legal requirements. LEVEL 3: WORK ENVIRONMENT At this level work environment standards are defined which are specific to either Land, Marine or Airborne work environments. LEVEL 4: STAKEHOLDER

At this level the AAL HSE Management System assigns responsibilities to every employee and provides support to staff in achieving the HSE objectives. Clients, shareholders and society as a whole have a strong influence on our HSE approach.

HSE 2

Implementation of the AAL HSE Management System

Roles and Responsibilities

This section describes the roles and responsibilities of all personnel with regard to the HSE Management System.

MANAGING DIRECTOR

The Managing Director (MD) directs and endorses the HSE vision and policy, reviews AAL HSE performance and fosters a culture of a high HSE standard within AAL.

TECHNICAL COMMITTEE

The Technical Committee (TC) regularly reviews the HSE Management System and provides updates where and when applicable in support of the continuous improvement process.

OPERATION MANAGER

The Operation Manager (OM) ensures the compliance of all entities within his business line(s) to the AAL HSE Management System. He sets the annual HSE target for his business line(s) and reviews and evaluates performance. He promotes HSE initiatives and leads as a role model.

OPCO MANAGING DIRECTORS

Managing Directors ensure compliance with the AAL HSE Management System. They implement HSE policies and procedures, which take account of the risks associated with their operations, the wellbeing of employees and legislative requirements. They prepare an annual HSE plan against which their OpCo performance is evaluated. Managing Directors are key to stimulating a positive attitude towards HSE within their OpCo.

HSE TEAM

The HSE Team consists of one HSE professional from each business line. The team provides the Technical Committee with advice and guidance on the need for and development of Policy and Corporate Standards. The HSE Team promotes, facilitates and drives the implementation of the AAL HSE Management System. They stimulate internal and external auditing of OpCos and provide advice, guidance and support on HSE matters within their specific business line. They also provide the forum where the transfer of knowledge and experience relating to HSE issues can take place across the business lines.

OPCO HSE MANAGERS

OpCo HSE Managers are the focal point for HSE within the OpCo. They provide advice and guidance to their management team. They are responsible for maintaining and monitoring the effective implementation of the OpCo HSE Management System.

OPCO LINE MANAGERS AND PROJECT MANAGERS

Line and Project Managers are responsible for the day-to-day management of HSE within their projects, and/or sites. This includes conformance with the OpCo HSE Management System. The AAL HSE Management System relies fully on the principle that HSE is a line management responsibility.

EMPLOYEES

Our culture of continuous improvement relies on the participation of all AAL employees. Those working for and with AAL are expected to support our vision and principles. Employees are required to take responsibility not only for themselves, but also for colleagues and others who may be affected by their actions. Employees shall comply with all AAL and OpCo policies, standards and procedures affecting their work and avoid intentionally interfering with, or misusing anything provided in the interests of health, safety or protection of the environment. Total reliance should not only be placed on formal written risk assessments. Employees are required to continually assess the risks inherent in any operation, implement a safe system of work and ensure that it is maintained. Employees are expected to intervene and where appropriate stop any unsafe work activity or situation.

HSE 3

Implementation of the AAL HSE Management System

Continual Performance Improvement

AAL HSE Management System is comprised of seven integrated components, as shown in the figure below. Continual improvement is achieved by following this process.

Figure: Continual improvement of the AAL HSE Management System

The basic elements for continual improvement are described below and overleaf. LEADERSHIP AND COMMITMENT

This element provides the visible expression of commitment by senior people within AAL. Commitment is made visible by documenting OpCo HSE plans, visits to operating companies, field operations and projects by senior management and by setting annual HSE targets.

HSE POLICY AND PRINCIPLES

This element establishes the AAL commitment to the process by providing a documented corporate vision, HSE policy and principles. These are appropriate to AAL’s business strategy and culture and set the direction of the HSE management system. The Technical Committee will review the policy and principles regularly.

ORGANIZATION The organization of the HSE Management System is outlined in this document, in particular in Section 2 and paragraph 3.1 of the full manual.

HSE 4

Implementation of the AAL HSE Management System RISK MANAGEMENT

Risk management for generic and project specific risks are dealt with in the Corporate HSE Standards, Work Environment HSE Standards, and in the OpCo HSE Management Systems. PLANNING AND PROCEDURES

This element provides strategic direction, objectives, goals and implementation strategies in order to plan how the policy should be implemented. It defines how the corporate strategic direction interacts with the planning and procedures of the OpCos. IMPLEMENTATION AND PERFORMANCE MONITORING

HSE performance is constantly monitored against annual OpCo HSE Plans and Business Line targets and reported on a quarterly basis for each business line and OpCo. HSE AUDITING AND REVIEW

Audit and review mechanisms are used to confirm that HSE is being managed in an efficient and effective manner and to evaluate proposed changes to the system. At the corporate level this auditing and review function is the responsibility of the HSE team.

Communication

AAL will maintain effective communication arrangements to enable the HSE management system to function to its full potential. This will include but shall not be limited to; the use of the AAL intranet, HSE booklets, meetings, alerts and campaigns. In addition HSE will be a key topic on all meeting agendas.

AAL HSE Targets

Corporate HSE targets will be set and reviewed with a view to continual performance improvement. OpCos shall include Corporate HSE targets in their annual HSE Plans along with their specific OpCo HSE targets. Each OpCo shall submit an annual HSE plan to the Operation Manager.

HSE targets are based on developing a good safety culture that positively influences human behavior at work, leading to reduced errors and violations, which are reflected in the figure below.

Engineering & Hardware Improvements

Safety Management Systems & Procedures

Safety Behaviors

Time

Figure: Targeting Behavioral Change

HSE 5

AAL HSE Vision

The AAL Vision of “caring for people’s safety” is described in the HSE Vision Statement.

AAL HSE Policy

The AAL HSE Policy states the corporate position and commitment to HSE. It explains why HSE is important to the business. Moreover, it expresses our commitment and it stimulates HSE awareness and proactive attitude throughout AAL.

AAL HSE Principles

The AAL HSE Principles give guidance to OpCos on the implementation of Corporate HSE requirements. They state the HSE objectives and assign HSE responsibilities towards all levels in the AAL organization.

The AAL HSE Principles are included at the Appendix.

HSE 6

AAL HSE Management System ployees

It is a cornerstone of AAL’s HSE culture that every employee understands that safety is paramount and that all staff have an obligation and responsibility to stop any work that they consider to compromise health, safety or the environment. Employees are encouraged and expected to contribute to continual improvement of the AAL HSE Management System. Clients

The AAL HSE Management system aims at establishing consistent and rigorous control over HSE hazards and in doing so meeting legal obligations of the countries in which we are working. Client plans and procedures may substitute or supplement AAL HSE requirements only if these plans and procedures meet or exceed AAL’s requirements. New or improved procedures as requested by our Clients should be forwarded to the HSE team for consideration for future inclusion in the AAL HSE Management System. Society

AAL is committed to the promotion and maintenance of an environmental policy that ensures that the impact of AAL’s operations upon the environment is reduced to a level that is As Low As is Reasonably Practicable (ALARP) and in so doing shall meet all legal requirements in relation to environmental issues. It is the duty of all employees to act in a manner that avoids damage to the environment and employees shall be provided with appropriate training to enable the implementation of this policy. This means that AAL is committed to:

• The maintenance and implementation of procedures for the correct handling, transportation and use of potentially polluting materials and substances. • Ensuring that all waste generated in the execution of the activities of AAL shall be disposed of in a correct and safe manner and that, wherever possible, waste materials shall be recycled. • Identifying potential risks of environmental incidents and maintaining procedures for responding effectively to them.

Subcontractors

As for each AAL employee it is vital that all subcontractors understand that HSE is paramount and that they have an obligation and responsibility to stop any work that they consider to compromise health, safety or the environment. Health, safety and environmental considerations shall be taken into account prior to selection/order/purchase of materials, equipment, products and subcontractors.

HSE 7

List of our tests

2

Services

Concrete Testing

Asphalt Testing

Aggregate Testing

Soils Testing

Cement Testing

Sand Testing

Water Testing

In-Situ Concrete Testing

In-Situ Soil Testing

Marshall Designing of Asphalt

CCTV Pipeline Inspection

Surveying Services

List of our tests 3

Standard Time Required Required Volume Method Name of Test S.

No

Concrete 1

1 Day As per project specification BS EN 12390 Compressive strength & Density of cube 1.01

5 Days 3 samples from each set BS 1881 : Part 122 Water absorption 1.02

1 Day As per project specification ASTM C 39 Compressive strength of concrete cylinders 1.03

1 Day As per project specification ASTM C 78 Flexural strength of concrete beams 1.04

4 Days Length greater then diameter BS 1881 : Part : 120 Comp. Strength, density & visual

examination of drilled concrete cores 1.05

2 Days 12 samples from each lot BS : 2028 Comp. Strength of concrete blocks including weight & nominal dimensions 1.06

2 Days As per project specification BS 1881 : Part : 208 Initial surface absorption test (ISAT) 1.07 35 days including 28

days comp. result As per project specification BS 1881 : Part:125 Concrete Mix Design & laboratory trial mixes. Client shall provide all material 1.08

4 Days As per project specification DIN 1048 Water permeability test 1.09

2 Days As per project specification ASI 216-1 Fire Resistance Test 1.10

2 Days As per project specification 6946 EN ISO Thermal Resistance of Concrete Hollow Blocks 1.11

Days 3 As per project specification 8-12390 BS EN Impermeability to Water Penetration of Hardened Concrete 1.12

3 Days As per project specification ASTM C 140 – 99B Water Absorption of Concrete Masonry Units 1.13

Fresh Concrete Testing At Site 2 Immediate Each truck BS EN 12350-2 Slump test & temperature 2.01

Immediate As per project specification BS EN 12350-7 Air content 2.02

List of our tests 4

Standard Time Required

Required Volume Method Name of Test S. No

1 Day As per project specification BS EN 12390-2 Sampling & manufacture of specimen 2.03

Tiles Marbles 3

2 Days As per project specification ASTM C 373-88 Water absorption By Boiling Method 3.01

1 Days As per project specification ASTM C 648-84 Breaking strength 3.02

1 Days As per project specification ASTM C 482-81 Bond Strength 3.03

3 Days As per project specification ASTM C 97 Absorption & Bulk specific gravity of dimension stone 3.03

11 Days As per project specification ASTM C 502 Wedging of Ceramic Titles 3.04

3 Days As per project specification ASTM C 170 Compressive strength 3.05

Asphalt 4

2 Days As per project specification BS EN 12697-6 or ASTM D 2726 Density & compaction of core samples 4.01

2 Days 25 Kg ASTM D 2172 &

ASTM C 136 or BS 812 Part 103.1

Binder content by centrifuge extraction & sieve analysis of aggregate obtained 4.02

2 Days 3 specimen BS EN 12697-34 Marshal Test on plant mixed sample (3 specimens) 4.03

14 Days 100 Kg each material BS EN 12697-34 Marshal Design 4.04

1 Days ………. ASTM D 2041-91 Specific Gravity of Bituminous Paving Mixture 4.05

Aggregates 5 2 Days 10 Kg BS:812, Part:103.1 Sieve analysis (Dry) 5.01

List of our tests 5



2 Days 10 Kg ASTM C 136-01 Sieve analysis of fine & coarse aggregates 5.02

2 Days 10 Kg ASTM C 117-03 or BS 812 Part 103 Materials finer than 75 microns 5.03

3 Days 10 Kg ASTM C 142 Clay lumps & friable particles 5.04

2 Days 5 Kg BS: 812 Section 105.1 Particle shape-Flakiness index 5.05

2 Days 5 Kg BS: 812 Section 105.2 Particle shape-Elongation index 5.06

3 Days 5 Kg ASTM 127-01 Density, Relative Density (Specific Gravity) & absorption of coarse aggregate 5.07

3 Days 5 Kg BS:812 Part 2, Test 5.4 Particle Density & Water absorption 5.08

3 Days 5 Kg ASTM C 128-01 Specific Gravity & absorption 5.09

3 Days 25 Kg ASTM C 131-03 Los Angeles abrasion value 5.10

2 Days 5 Kg BS:812 Part 109 Moisture content 5.11

3 Days 25 Kg BS 812 Part 2 Bulk Density (compacted & uncompacted) 5.12

3 Days 5 Kg BS:812, Part 106 Shell content (visual description 5.13

3 Days 10 Kg BS:812, Part 112 Aggregate impact value 5.14

3 Days 10 Kg BS:812, Part 110 Aggregate crushing value 5.15

3 Days 10 Kg BS:812, Part 111 Ten percent fines value 5.16

4 Days - ASTM C 88 Loss magnesium sulphate soundness by 5 cycles 5.17

1 Days - ASTM C 40 Organic Importies 5.18

List of our tests 6



1 Days - BS EN 1744 Acid soluble chloride & sulphate 5.19

3 Days 10 Kg BS EN 1367-14 Dry shrinkage of aggregate 5.20

Soil 6 3 Days 25 Kg BS:1377, Part 2 Particle size distribution 6.01

3 Days 2 Kg BS:1377, Part 2 Liquid Limit, Plastic limit & PI 6.02

3 Days 2 Kg ASTM D 4318-00 Liquid limit, Plastic limit & Plasticity Index 6.03

3 Days 50 Kg BS:1377,Part 4 Dry Density/ Moisture content relationship 6.04

3 Days 50 Kg ASTM D 1557-02 Dry Density/ Moisture content relationship 6.05

6 Days 25 Kg BS:1377, Part 4 California Bearing Ratio (CBR) 6.06

6 Days 50 Kg ASTM D 1883 California Bearing Ratio (CBR) 6.07

2 Days 5 Kg BS: 1377, Part 2 Moisture content 6.08

2 Days 5 Kg BS: 1377, Part 2 Wet density undisturbed sample 6.09

2 Days 5 Kg BS: 1377, Part 2 Dry density undisturbed sample 6.10

2 Days 5 Kg BS: 1377, Part 2 Specific gravity 6.11

2 Days 5 Kg BS: 1377, Part 2 Linear shrinkage 6.12

Cement 7 2 Days 2 Kg BS EN 196-3 Initial & final Setting times 7.01

2 Days 2 Kg BS 812 Part 124 Chloride & sulpher trioxide 7.02

List of our tests 7



2 Days 2 Kg BS EN 196-6 Fineness of Cement 7.03 Sand 8

1 Day - BS EN 933 Part 8 Sand Equivalent Test 8.01

4 Days - ASTM C 88 Loss Magnesium Sulphate Soundness 8.02

1 Day - BS EN 933 Part 1 Sieve analysis test 8.03

1 Day - BS 812 Part 2 Bulk density of (compacted/uncompected) 8.04

2 Days - BS EN 1097 Part 6 Specific gravity of water absorption of fine 8.05

1 Day - ASTM C 142 Clay lumps & friable particles 8.06

1 Day - BS EN 1744 Acid soluble chloride & sulphate 8.07

1 Day - BS 812-92 Moisture content 8.08

1 Days - BS EN 933 Materials finer than 75 microns 8.09

Water 9

4 Days - APHA/AWWA-21st Edition 2005 Water Analysis 9.01

(Select appropriate box)Determination of particle size distribution of aggregate by sieveDetermination of clay, slit & dust content in fine or coarse aggregateDetermination of aggregate particle shape (flakiness index)Determination of aggregate particle shape (elongation index)

size larger than 10mm using a wire mesh basketSp Gravity & water absorption of aggregatewith normalnot larger than 10mm using a pycnometerDetermination of aggregate impact value

Determination of aggregate crushing valuenon- standard size

Determination of aggregate ten per cent fines value

non- standard sizeLos Angeles Abrasion Value

non- standard size

Other (please specify)

Lime Stone GabbroAdd information Client sample No. No Of Sample

Sample(s) delivery supervised by Test certificate(s) Received By ( Note 1)SignatureNameTel.DateNotes: 1)I do acknowledgement receiving the attached report of above data conforming the technical information is requested.

standard size

standard sizeASTM C 131

SoudnessASTM C 88 - 90

Contract No.LPO No.

Test Requested

dry soaked AAG8.3BS812:Part 111

AAG6.1

AAG7.2

Sp Gravity & water absorption of aggregatewith normal

TESTING REQUEST FOR AGGREGATE

dry soaked

standard size

AAG1.1

AAG2.2

AAG3.1

AAG5.2

BS812:Part 110

For laboratory use only

Job TitleWork/Site Location

Consultant

Account No. (if available)

Project

Lab. Reference No.

AAG4.2

AAG5.1

BS812:Part 1

BS812:Section 105.1

BS812:Section 105.2

BS812:Part 2,Section 5.3

BS812:Part 2,Section 5.5

BS812:Part 112

Client (Works Dept/Office)

Sample Testing Program No.Test Request No. (TRN)

Description of Test AAL No

AAG8.3AAG9.1

BS812:Sect.103.1

Date

OtherRemarks

SignatureNameTel.

Samples taken by: Consultant/Client/Al Arabiya

Aggregates/Arabiya/S.A.D.G

(Select appropriate box)Determination of fineness of Pulverized-fuel Ash (PFA)

strength Activity Index wth Portland Cement 03D 07D 14D 28D ………….Fineness Of fuel Ash by the 45-µm (Sieve no - 325) Sieve




ASTM C 805

BS 1881: Part 120

COP8.3

COP6.1

COP7.2BS7263:Part 1



Consultant


Project

Lab. Reference No.

Contract No.LPO No.

TESTING REQUEST FOR CEMENT (BS EN 197:2000) AND PFA MATERIAL

Test Requested

COP1.1COP2.2Loss on ignition (fuel Ash)

COP3.1

COP4.2

COP5.1

COP5.2BS7263:Part 1

BS7263:Part 1

ASTM C-114/ C311

ASTM C - 311

ASTM C - 340

BS6073




COP8.3

COP9.1

BS3892:Part 1

Date

OtherRemarks

SignatureNameTel.



(Select appropriate box)BS EN 12390 -3 : 2002 Concrete Cubs Compressive strength & Density& BS EN 12390 -7 : 2000

Concrete Cubs Compressive strength & Density

Nominal Size (mm) 100mm 150mm

Date Received:Date Of Test 3days 7days 14days 28days …………days

Cube ID Date Of Casting Date Of Testing No Of Sample

Sample(s) delivery supervised by Test certificate(s) Received BySignature SignatureName NameTel. Tel.Date DateNotes:1)To be Entered in Curing 8 hours format2) Concrete must be sampled and cubes made and delivered under the supervision of Consultant3)Duplicate Copy of the request form should be submitted to Consultant


Remarks (Pour Location)

B.S.1881

Owner Name

Test Request No. (TRN)

AAL No

Sample details

Source of material:




Consultant


Project

Client Test Request Ref. No.

Collection Request No. (CRN)

TESTING REQUEST FOR CONCRETE CUBES

Contract No.Job No.

Test requested

COC 1.1

COC 2.1

Grade:…………..N/mm²OPC/SRC/MS/FLA

Description of test


(Select appropriate box)Precast Concrete Paving Blocks Compressive strength

Color…………………………Precast Concrete Paving Blocks Water Abortion

Color…………………………Precast Concrete Hollow Blocks Compressive strength

Precast Concrete Solid Blocks Compressive strength

Precast Concrete Kerb stone Compressive strength

Precast Concrete Blocks Fire Rate TestDimension……………x………………x……………… Compressive strength of Concrete Core

Testing




Date

OtherRemarks

SignatureNameTel.





COP8.3

COP9.1

BS6717:Part 1

BS6717:Part 1

BS6073

BS6073

BS6073 COP5.1

COP5.2

Dimension……………x………………x………………

BS7263:Part 1

BS7263:Part 1

BS7263:Part 1

Precast Concrete Kerb stone Transeverse strength

Dimension……………x………………x………………

COP1.1

COP2.2

COP3.1

COP4.2


Consultant


Project

Lab. Reference No.TESTING REQUEST FOR PRECAST CONCRETE


Rebound Hameer TestASTM C 805

Contract No.LPO No.

Test Requested

COP8.3

COP6.1

COP7.2

Precast Concrete Insulation Blocks Compressive strength

DrillingBS 1881: Part 120

Thickness…………….mm

Thickness…………….mm

Dimension……………x………………x………………

Dimension……………x………………x………………

Dimension……………x………………x………………

Dimension……………x………………x………………Precast Concrete Kerb stone Water Abortion


Request ( To be completed and then emailed/faxed to Al Arabiya Lab(Note 1) )A. Please indicate below the required material testing services:

Soils (Give separate details of type of tests)

Bituminous materials (Note 2) Cements Concrete cubes and cores Concrete Precast Materials Others (Please specify)

B. Collection service for concrete cubes, concrete cores and Other materials(Note 3) Required Not Required

Client Officer in charge of Contract Consultant in charge of Contract (if applicable)Name. Name.Post. Post.Tel./Fax No. Tel./Fax No.Email. Email.Representative on site Samples shall normally be delivered by the following project site person(s) : (Note 4)

Name. Name.Post. Post.Tel./Fax No. Tel./Fax No.Email.Site Contact Person for Sample Collection/Field Test Recipient of Preliminary ResultsName. Name.Post. Post.Tel./Fax No. Tel./Fax No.Email.Recipient of Test Certificates (Note 5) Authorised Person to collect Test Certificate / Security Label (Note 6)

Name. Name.Post. Post.Tel./Fax No. Tel./Fax No.Notes :1) The addresses of AAL can be found at the website (http://www.daratprojects.com). Test request forms and AAL Test Directory can

be downloaded from the downloading area of the our website. The sample reception hours of the AAL are as follows :

2) When requesting tests for concrete cubes/cores or bituminous materials, mix design No / ID and mix details should be provided.

3) Sample collection service is not available for remote areas and outlying islands without a road link.A procedural brief for requesting

sample collection and testing services will be provided after registration.

4) This information shall be provided for persons delivering test samples. Test samples shall not normally be accepted from government

employment or consultants employed on government projects

5) In the event of failure to deliver to the stated address, certificates may be delivered to the client’s head office

6) If certificates / security labels are to be collected, any number of persons may be nominated by providing separate details. Certificates /

security labels will not be released to any person not pre-registered with the laboratory unless he is specifically authorised in writing to do

so. Certificates not collected within two weeks may be sent by post to the client’s head office.

Requested by: Signature: Date:

Job Title(if any) Job No.(if any)(please attach a site location plan if available)Work/Site Location

Aggregates

Saturday to Thursday - 7:00 am to 05:00 pm


ConsultantProject Client (Works Dept/Office)

Account No.Date received

REGISTRATION FORM FOR TESTING OF CONSTRUCTION MATERIALS


(Select appropriate box)Determination of Dry Density & Moisture Content Relationship of soil (using 1000cc or CBR mould and 4.5 kg Rammer).

Determination of Liquid Limit, Plastic Limit and Plasticity Index.(cone penetrometer method).Determination of Liquid Limit, Plastic Limit and Plasticity Index. (Casagrnde method).Determination of Particle Size Distribution by wet sieving(Back Fill Materials)

Distribution by the hydrometerDetermination of Particle Size Distribution by Dry sieving (Sub Base Material)Determination of laboratory CBR test with following

Degree of compaction…………% moisture content………... %Determination of Field Bearing Capacity ( Plate Load Test)Design Bearing Capacity ……………... Kn/m²Determination of Field Compaction & Moisture Content) Sand Replacement method Nuclear Guage method Non Nuclear Guage method

Back Fill Sub Base OtherAdd information Client sample No. No Of Sample

Sample(s) delivery supervised by Test certificate(s) Received By( Note 1)Signature SignatureName NameTel. Tel.Date DateNotes: 1)I do acknowledgement receiving the attached report of above data conforming the technical information is requested.

Determination of Small Particle Size

Sampling location:

unsoaked

SOL 3.3

SOL 5.1

BS1377

B.S. 1377: 1990 Part 9

B S 1377, Part 4. 1990

BS1377

B S 1377, Part 2. 1990

B S 1377, Part 2. 1990

Sample Request No. (TRN)Test Request No. (TRN)

Description of test


Contract No.Job No.

AAL NoTest requested

SOL 2.2

TESTING REQUEST FOR SOIL



Consultant


Project

Lab. Reference No.

SOL 1.1

SOL 2.1

SOL 3.1

SOL 3.2

Remarks

ASTM C 131

BS 812 : Part 103

soaked

Other (please specify)Sample details


SOL 4.1B S 1377, Part 4. 1990

Source of material:

SOL 6.1


Al Arabiya Laboratories Organization Chart

Managing Director

QA/QC Engineer Internal Auditor

Sales Engineer Material Engineer

Site Coordinator

Technical Manager Administration Manager

Finance Manager

Secretary

HR IT Officer

Drivers

Chief Accountant

Cashier Accountant

Geological Engineer

Sr. Lab Technician Sr. Lab Technician

Lab Technician Lab Technician

Astt. Lab Tech. Astt. Lab Tech Astt. Lab Tech Astt. Lab Tech

Key Personnel 1

Name Degree Years of Experience Position Brief

Najeeb Ashour

BSc in Civil Engineering 27 Managing Director

Graduated from University of Jordan. A concrete specialist conducting various consultancy services to the cement products industry for the last 12 years in UAE & Qatar. With long experience in geotechnical engineering and soil mechanics executing many surveys and exploration studies in Jordan along with land slides studies and providing solutions for constructions on substrata with cavities & ground holes.

Dr. Yahia Al-Hassani PhD in Civil Engineering 26 Projects Manager & Technical Advisor

Graduated from University of Paul Sabatier, Toulouse III, France. A concrete sprecialist/advisor, and expert in various fields of construction materials for testing and analysis. Having long experience in infrastructure, utilities, bridges, and underground sewerage treatment plants.

Afsar-ul-Mulk BSc in Civil Engineering 33 Senior Materials Engineer

Graduated from University of Lahore for Engineering & Technology. A professional construction materials engineer working mainly in road works specialized in Asphalt mix designs and quality control on site activities for materials laying and testing.

Key Personnel 2


Mustafa Refaee BSc in Management Information Systems 10 Business Development

Manager

Graduated from University of Balqaa in Jordan with management information systems followed by University of North Atlantic in Qatar with advanced science in health and safety. An expert in ERP & QMS systems as performance monitoring tools empowering our business axes sustainability.

Mohammad Parwez Iqbal

BSc, MCP, CCNA, A+, N+

08 IT & Instrumentation Engineer

A skilled IT professional, Graduated from Vinoba Bhave University Hazaribagh India, with Diploma in Rail Transport & Management from IRT in New Delhi of India. Developing his technical qualifications through CCNA, Hardware (A+) and Networking (N+).

Mahmoud Abd El-Moneim Industrial Diploma 25 Operations Supervisor

A highly professional specialist building up his diversified experience in construction works rehabilitation and restoration varying from structural repairs by injection systems, water proofing, heat insulation, sound proofing, complete roofing systems, pile-head treatment, epoxy flooring, full pipelines inspection for spot repair and re-lining using CCTV systems, installation of cathodic protection for pipelines and buildings, full welding works. An approved applicator for almost of the repair methods and systems recommended by many chemical manufacturers, all within Egypt, Bahrain, Saudi Arabia & Qatar.

Key Personnel 3


Moneim M Moneim Industrial Diploma 09 Certified CCTV Operator

A highly trained professional operator for all types of CCTV systems and models of fully computerized reporting and advanced robotic technology, and certified repair applicator & inspector.

Mohammad Majbul

Diploma in Civil Engineering

18 Sr. Laboratory Technician

Working as chief laboratory technician also as laboratory supervisor, and QC inspector with long experience in roads, buildings, bridges, pipelines drainage and sewerage projects in UAE & Qatar. Good experience in operating the nuclear gauge for many of the infrastructure & roads projects.

Geeth Shiromal Diploma in Civil Engineering 08 Sr. Laboratory

Technician

Working as chief laboratory technician with extensive experience in all fields of testing for concrete, soil, aggregate, and asphalt. Operating most of the NDT instruments specially the PQI & SDG the non-nuclear gauges.

Administrative Staffs - 03 - -

Skilled Technicians - 06 - -

Equipments & Tools

2

LIST OF LABORATORY EQUIPMENT

CONCRETE SECTION S.NO EQUIPMENTS QUANTITY

01 Compression machine 2000 kn. (with new electronic computerized digital display unit)

01

02 Compression machine 2000 kn. (Unit test DHR 2000 Semi – automatic)

01

03 Compression machine 3000 kn. (Tecno test, automatic- digital display unit)

01

04 Rapid Chloride Permeability machine - 08 cell 01 05 Water Permeability apparatus machine -12 cell 01 06 Flexure machine

(Tecno test, digital display unit) 01

07 2 Upper Beareres Assembly for 2 point loading 01 08 2 Upper Beareres Assembly for 1 point loading 01 09 Curing tank for the con cube 02 10 Electronic Balance 150kgx01g-Citizen, USA 01 11 Electronic Balance 60kgx01g-Citizen, USA 01 12 Electronic Balance 30kgx0.5g-Citizen, USA 01 13 Hollow block testing serving dish 04 14 Cylinder Mould 150x300mm 12 15 Cube Mould 150mm 105 16 Gang Mould 50x50x50mm 10 17 Vibrating Table 800x800 240volts 01 18 Concrete air meter type B 01 19 Blaine Air Permeability Apparatus 01 20 Concrete slump test tools 03 21 Flow Table BS1881 Complete Set 01 22 Mortar Workability Apparatus 01 23 Feller Gauge Set 13 0.03 to 0.5mm 01 24 Concrete drum type mixers 01 25 Mortar Mixer 5ltr Capacity 01

26 Concrete core capping tools 01

27 Venire caliper - Manuel 01

28 Venire caliper digital 01 29 Core drilling machine Hilti DD 500 & machine with all

accessories(core bits, pumps, extension, drill box) 01

Equipments & Tools

3

S.NO EQUIPMENTS QUANTITY 30 Core drilling machine hilti DD 200 & machine with all

accessories(core bits, pumps, extension, drill box) 01

31 Single phase generator 01 32 Vicat Apparatus C/W Plunger 01 33 Drying Shrinkage Apparatus 01 34 Initial surface absorption test apparatus 01 35 Cement setting time tools set 02 36 Digital thermometer 01

36-1 Curing Tanks 06

AGGREGATE SECTION 37 ACV moulds with all accessories 01 38 Los Angeles Abrasion Machine 240volts 01 39 Electronic Balance 03 kg x 0.01g 01 40 Electronic Balance 30kg x 01g-Citizen, USA 01 41 Weighing Air/Water Frame 01 42 Electronic Balance 06kgx0.1g-Citizen, USA 01 43 Sample divider 02 44 Relative Density Basket 01 45 Sand Absorption Cone & Tamper 01 46 Set of Seven Flakiness BS812 01 47 Digital Count Down/Up Timer 01 48 Bulk Density Measure 5ltr 01 49 Bulk Density Measure 10ltr 02 50 Bulk Density Measure 20ltr 01 51 Oven Large Double 225L 240volts 01 52 Particle density gas jars 05 53 Pycanometer 01 54 Measuring ruler 03 55 B.S. Test sieve 75.00 mm,300 mm diameter 01 56 B.S. Test sieve 50.00 mm,300 mm diameter 01

57 B.S. Test sieve 37.50 mm,300 mm diameter 01 58 B.S. Test sieve 28.00 mm,300 mm diameter 01 59 B.S. Test sieve 20.00 mm,300 mm diameter 01 60 B.S. Test sieve 14.00 mm,300 mm diameter 01 61 B.S. Test sieve 10.00 mm,300 mm diameter 01 62 B.S. Test sieve 6.30 mm,300 mm diameter 01 63 B.S. Test sieve 5.00 mm,300 mm diameter 01

Equipments & Tools

4

S.NO EQUIPMENTS QUANTITY 64 B.S. Test sieve 3.35 mm,300 mm diameter 01 65 RECEIVER & LID, 300 mm diameter 01 66 B.S. Test sieve 2.36 mm,200 mm diameter 01 67 B.S. Test sieve 1.70 mm,200 mm diameter 01 68 B.S. Test sieve 1.18 mm,200 mm diameter 01 69 B.S. Test sieve 0.850mm,200 mm diameter 01 70 B.S. Test sieve 0.600mm,200 mm diameter 01 71 B.S. Test sieve 0.425mm,200 mm diameter 01 72 B.S. Test sieve 0.300mm,200 mm diameter 01 73 B.S. Test sieve 0.212mm,200 mm diameter 01 74 B.S. Test sieve 0.150mm,200 mm diameter 01 75 B.S. Test sieve 0.75mm,200 mm diameter 01 76 B.S. Test sieve 0.63mm,200 mm diameter 01 77 RECEIVER & LID, 200 mm diameter 01 78 Flakiness gauge 02 79 Elongation gauge 02 80 Aggregate Impact Value 01 81 SIEVE SHAKER with TIMER for 200-300mm SIEVES 01 82 Unit weight mould 01 83 Scoop 2.5kg Aluminum 01 84 Scoop 1.0kg Aluminum 02 85 Rubber Mallet 01 86 Sand Equivalent Complete Set in Carrying Case 01

SOIL SECTION 87 CBR/Marshall motorized two speed load frame 50 kn

with 2 channels computerized digital unit 01

88 Automatic CBR/ proctor compactor 01 89 Penetrometer with accessories for soil 01 90 CBR & Marshall machine 01 91 CBR loading ring 50kn 01 92 CBR mould BS 04 93 Proctor Mould 1/30th foot ASTM 02 94 Casagrande Apparatus BS1377 01 95 Proctor Mould 1 liter 02 96 Linear Shrinkage Mould for Soil 01

97 Spatula 150mm 02

Equipments & Tools

5

S.NO EQUIPMENTS QUANTITY 98 Spatula 100mm 02 99 Electronic Balance 30kgx0.5g-Citizen, USA 02

100 Manual proctor rammer 4.5 01 101 Sand replacement density test equipment 03 102 Plate bearing test apparatus 01 103 Oven thematically controlled 01 104 Sample extruders 01 105 Wash Bottle 500ml 01 106 ASTM Test Sieve 75.0mm-3 inches, 200 mm diameter 01 107 ASTM Test Sieve 63.0mm-2 ½ inches, 200 mm diameter 01 108 ASTM Test Sieve 50.0mm-2 inches, 200 mm diameter 01 109 ASTM Test Sieve 37.5mm-1 ½ inches, 200 mm diameter 01 110 ASTM Test Sieve 25.0mm-1 inches, 200 mm diameter 01 111 ASTM Test Sieve 19.0mm-3/4 inches, 200 mm diameter 01 112 ASTM Test Sieve 12.5mm-1/2 inches, 200 mm diameter 01 113 ASTM Test Sieve 9.50mm-3/8 inches, 200 mm diameter 01 114 ASTM Test Sieve 4.75mm-no.4, 200 mm diameter 01 115 ASTM Test Sieve 2.36mm-no.8, 200 mm diameter 01 116 ASTM Test Sieve 2.00mm-no.10, 200 mm diameter 01 117 ASTM Test Sieve 1.18mm-no. 16, 200 mm diameter 01 118 ASTM Test Sieve 0.850mm-no. 20, 200 mm diameter 01 119 ASTM Test Sieve 0.600mm-no. 30, 200 mm diameter 01 120 ASTM Test Sieve 0.425mm-no. 40, 200 mm diameter 01 121 ASTM Test Sieve 0.300mm-no. 50, 200 mm diameter 01 122 ASTM Test Sieve 0.150mm-no. 100, 200 mm diameter 01 123 ASTM Test Sieve 0.075mm-no. 200, 200 mm diameter 01 124 BS/ISO S/S Test Sieve 45.00mm, 200 mm diameter 01 125 BS/ISO S/S Test Sieve 22.40mm, 200 mm diameter 01 126 BS/ISO S/S Test Sieve 12.5mm, 200 mm diameter 01 127 BS/ISO S/S Test Sieve 10.00mm, 200 mm diameter 01 128 BS/ISO S/S Test Sieve 8.0mm, 200 mm diameter 01 129 BS/ISO S/S Test Sieve 6.3mm, 200 mm diameter 01 130 BS/ISO S/S Test Sieve 2.00mm, 200 mm diameter 01 131 BS/ISO S/S Test Sieve 1.00mm, 200 mm diameter 01 132 BS/ISO S/S Test Sieve 0.063mm, 200 mm diameter 01 133 BS/ISO S/S Test Sieve 0.500mm, 200 mm diameter 01 134 BS/ISO S/S Test Sieve 0.250mm, 200 mm diameter 01 135 BS/ISO S/S Test Sieve 0.125mm, 200 mm diameter 01 136 RECEIVER & LID, 200 mm diameter 01 137 Mixing trays large 14.0mm 04

Equipments & Tools

6

S.NO EQUIPMENTS QUANTITY 138 Mixing trays medium 20.00mm 02 139 Sampling trays large 40.00mm 05 140 Sampling trays medium 05 141 Sampling trays small 05 142 Non nuclear soil Density gauge (SDG200) 01 143 Non nuclear Asphalt Density gauge (PQI380) 01 144 Plate Load Test 02

ASPHALT SECTION 145 Automatic Marshall compactor 01 146 Bitumen extraction machine 01 147 Marshall mould 10 148 Water bath 01 149 Oven thematically controlled 01 150 Ring & Ball Apparatus BS 01 151 Penetrometer Auto – No Cone for Bitumen 01 152 Thermometer Digital Thermometer 03 153 Venire caliper 01

Ref. list of our Projects 1

PROJECTS CLIENT CONSULTANTS YEAR AREA OF SERVICE

SERVICE REQUIRED BY

SCOPE OF WORK

Piazza Fox Hills Phase 1

Draieh Contracting

ERGA Consultant 2012 Lusail Draieh Contracting QA

Piazza Fox Hills Phase 2

Draieh Contracting

United Consultant 2012 Lusail Draieh Contracting QA

Business Square Marina Tower

Draieh Contracting

Not Specified 2012 Lusail Draieh Contracting QA

Mixed Used Building Shannon

Engineering Not Specified 2012 Meesaid

Shannon Engineering

Concrete Core Extracting

Sabeah Readymix-Concrete

Al Ali Engineering

Not Specified 2012 Lusail Al Ali Engineering QA/QC

2 Store+5 Labor Accommodation

Ramco Engineering

Bridge Consultant

2012 Industrial

Area Ramco Engineering QA

B+G+2 Office Building Ramco

Engineering Bridge Consultant

2012

Hilal Ramco Engineering QA

Al Ghanim Villa

Swiss Pumps for Trading &

Contracting Not Specified

2012

Doha


Contracting QA



SERVICE REQUIRED BY

SCOPE OF WORK

VIZ Site 2 Villa Swiss Pumps for

Trading & Contracting

Not Specified 2012 Al Rayyan Swiss Pumps for


QA

Proposed Villa B+G+1 Swiss Pumps for


Not Specified 2012 Al Rayyan


Contracting QA

B+G+M+1 Building General Trading

Group Not Specified 2012

Al Souq Area

General Trading Group

Soil Investigation

Proposed Material Store & Guard Room

Lexus Engineering

DGC Consultant

2012 Meesaid

Lexus Engineering QA

Central Kitchen Building at LVQ

Lexus Engineering

Not Specified 2011

New Industrial

Area

Lexus Engineering Soil Investigation

60 Villa Al Seal Trading & Contracting

United Consultant 2011 Ain Khalid Al Seal Trading &

Contracting QA

Hamad Women Hospital

Deepa Qatar KEO Consultant 2011 Doha Deepa Qatar QA

3 Unit+G+1+P Villa MSK Trading &

Contracting Southwest

Architecture 2011 West Bay

MSK Trading & Contracting

QA

Consulate Building Al –Emadi

Engineering ASC Consultant 2011 Al Dafna

Al –Emadi Engineering

QA

51 Villa Compound Tabadol Trading

& Contracting Al Saad Consulting

Engineering 2011 Simsima

Tabadol Trading Contracting

QA



SERVICE REQUIRED BY

SCOPE OF WORK

Proposed ( G+3) Flat Residential Building

A’yaan Ash-Sharq for

Constructions Not Specified 2011 Old Airport

A’yaan Ash-Sharq for Constructions

QA

Mosque ( DM 5 +IM 1+MH)

A’yaan Ash-Sharq for

Constructions Ministry of AWQAF 2011 Al Kheesah


QA

Jolliah Mosque A’yaan Ash-

Sharq for Constructions

Arabian Engineering Consultant 2011 West Bay


QA

B+G+P.H Villa A’yaan Ash-


Shuaa Engineering Consultant

2011 Umm Al Seneem


QA

Gulf Flag Co. Gulf Flag Co. Not Specified 2011 Industrial

Area Gulf Flag Co QA/QC

Playground, Plaza & Park

Al Sulaiteen Agricultural &

Industrial Complex

PWA 2011

Umm Salal

Al Sulaiteen Agricultural &

Industrial Complex QA

(G+1+PH) Villa +Out

kitchen

Arabiya QatarTrading & Contracting Co.

Al Rasheed Consultant Engineering

2011

Ain Khaleed

Arabiya QatarTrading & Contracting Co.

QA



SERVICE REQUIRED BY

SCOPE OF WORK

G+1+P.H Villa Bin Hameed For

Trading & Contracting Co.

Qatar Consulting Engineering Office

2011 Al Sailiya Bin Hameed For


QA

G+1+ Villa Bin Hameed For


Qatar Consulting Engineering Office 2011 Al Kheesa

Bin Hameed For Trading &

Contracting Co. QA

G+1 Villa Bin Thawab For

Excavation & Project

Universal Design Center

2011

Sailiya

Bin Thawab For Excavation &

Project QA

(G+1 + PH) outside kitchen +Villa


Project

Al Andalas Consulting Engineering

2011

Sailiya


Project QA

G+1+Out Kit+Out Majlis Villa

Civil Structural Trading Co.

Al Rem Consulting Engineering Office

2011 Sailiya Civil Structural

Trading Co. QA

Evaluation Of Material Al Deerah Mix

W.L.L Not Specified 2011 Doha

Al Deerah MixW.L.L

QA

HMC #3 Hospital Projects

Deepa Qatar KEO Consultant 2011 Doha Deepa Qatar QA

(G +1+P) Villa Al –Emadi

Engineering Qatari Home 2011 Al Dafna


QA

Headquarters Building Al –Emadi

Engineering Qatari Home 2011 Al Markhiya


QA

Commercial Mall ( 2 Basement + Ground +2 Typical ) (Qatar

Mall)


FBCB 2011 Madina

kalifa Al –Emadi

Engineering QA



SERVICE REQUIRED BY

SCOPE OF WORK

Falcon Ready Mix. Falcon Ready

Mix. Not Specified 2011 Doha Falcon Ready Mix. QA/QC

B+G+1 Villa Gulf Cont. &

Trad. Services Al Hasba Engineering

Consultant 2011 Al Gharafa

Gulf Cont. & Trad. Services

QA

G+1Villa Majlis+Kitchen

Gulf Star Trading &

Contracting Co

Al Waha Engineering Consultant

2011 Sailiya Gulf Star Trading &

Contracting Co QA

Site No:286 Island Sea Trad

&Cont Not Specified 2011 Al Khor

Island Sea Trad &Cont

QA

Doha City ( Site No:287)

Island Sea Trading &

Contracting Co. Not Specified 2011 Nuaija

Island Sea Trading & Contracting Co.

QA

Villa Island Sea Trading &

Contracting Co Not Specified 2011 Nuaija

Island Sea Trading & Contracting Co

QA

Shopping Mall Imperial Trading

& Contracting Co.

SWA 2011 Mesaimeer Imperial Trading &

Contracting Co. GEOTECHNICAL INVESTIGATION

G+1+P.H+ Villa +Outside Kitchen

Al Gazzera Excavation &

Contracting Co.

Al Sraiya Engineering Consultant

2011

Al Kheesa

Al Gazzera Excavation &

Contracting Co.

QA

Jokira Park 1 Al Kharj Trad. &

Cont. Co. Public Garden Department

2011 Jokira Al Kharj Trad. &

Cont. Co. QA

Proposed Dining Hall for Cadet Officers at ABM Military Collage

Al Kharj Trad. & Cont. Co.

Qatar Armed Forces 2011 Duhaliyath Al Kharj Trad. &

Cont. Co. QA



SERVICE REQUIRED BY

SCOPE OF WORK

(G+1) Villa+ Out

Kitchen Al Kharj Trad. &

Cont. Co. Not Specified 2011 Site No 177


QA

G+1 +P Villa M.A. Trading Co.

Not Specified 2011 Rawadat Al

Hamama M.A. Trading Co. QA

G+1 +P Villa +Out Kit M.A. Trading Co. Al Sraiya Consultant 2011 Rawadat Al

Hamama M.A. Trading Co. QA

Villas (G+1+P)+Extension

Mohd. International

Group Not Specified 2011 Ain Khalid

Mohd. International

Group QA

Villa MSK Trading & Contracting Co.

SWA 2011 Pearl Qatar BVS 49 & 50

MSK Trading & Contracting Co.

QA

G+1 Villa Al Orjwan Trading &

Contracting Co

Al Shuaa Engineering Consultant

2011 Al Kheesa Al Orjwan Trading & Contracting Co

QA

(G+1+PH) Villa & Outside Kitchen

Pillar Construction & Development.

AAG 2011 New

Sayliyah Pillar Construction & Development.

QA

Villa (G+1+P.H)+Outside

Kitchen

Project Engineering

Works & Cont. Company

Al Shuaa Consult ting Engineering

2011 Ain Khalid Project

Engineering Works & Cont. Company

QA

2 Villa (G+1+P)+Swimming

Pool

Project Engineering


Arabian Architecture Group

2011 Legtaifiya Project


QA



SERVICE REQUIRED BY

SCOPE OF WORK

(G+1) Ladies Saloon

Project Engineering


Al Madain Consulting Engineering

2011 Al Wakra Project


QA

Villa (G+1+)+Majlis

Project Engineering


Al Madain Consulting Engineering

2011 Al Wakra Project


QA

Al Hitmi Park Qatar & Gulf Enterprises

Not Specified 2011 Al Hitmi Qatar & Gulf Enterprises

QA

(G+ 1+ PH ) 3Villa Qatari Emarati


Al AQSA. Engineering Consultancy

2011 Duhail. Qatari Emarati


QA

G+ 1 Villa Qatari Emarati


Not Specified 2011 Sumama Qatari Emarati


QA

G+1+PH) Villa +Outside Kitchen

Al Raied Trading &

Contracting Co.


2011 Al Wakra Al Raied Trading &

Contracting Co. QA

(G+1+PH) Villa +Outside Kitchen & G

Room

Al Raied Trading &

Contracting Co.


2011 Al Wakra (Site No -

72)

Al Raied Trading & Contracting Co.

QA

G+1Villa + Majlis & K Block

Al Raied Trading &

Contracting Co.



66)


QA



SERVICE REQUIRED BY

SCOPE OF WORK


Al Raied Trading &

Contracting Co.



67)


QA


Al Raied Trading &

Contracting Co

Al Fajer Engineering Consultant


69)

Al Raied Trading & Contracting Co

QA


Al Raied Trading &

Contracting Co.



70)


QA

(G+1+) Villa & D Room

Al Raied Trading &

Contracting Co.



71)


QA

Villa Red Line Co. Shuaa Engineering

Consultant 2011 Pearl Qatar Red Line Co. QA

(G+1+PH ) 02 Villa Rivera Trading &

Contracting Company

United Consultants 2011 Abu Hamour Rivera Trading &

Contracting Company

QA

(G+1+PH ) 02 Villa Rivera Trading &

Contracting Company

United Consultants 2011 New Salata Rivera Trading &

Contracting Company

QA

2 Villa (G+1+P.H) Saba

Engineering Al Aqsa Consulting

Engineering 2011 Al Gharafa Saba Engineering QA

Palace Samar Trading & Contracting Co.

Al Shaeen Engineering Consultant

2011 Al Gharafa Samar Trading & Contracting Co.

QA



SERVICE REQUIRED BY

SCOPE OF WORK

Villa + Outside Kitchen+ Majlis

Seqliya Engineering &

Contracting EST. Not Specified 2011 Wejba

Seqliya Engineering & Contracting EST.

QA

G+ M+5 Building Al Shaibi &

Rihan Contracting Co.

City Group Engineering Consultant

2011 Monsoora Al Shaibi & Rihan Contracting Co.

QA

Proposed 22 No’s Villa (G + 1+ PH + CH +

GR+ Spool + C Room)

Simplex Trading & Contracting

Co.

Design & Engineering Consultant

2011 Al Rayyan Simplex Trading &


Villa

Specialized Trading &

Contracting Co

Qatar Architectural & Planning Group

2011 Specialized Trading & Contracting Co

QA

(G+1+PH) Villa +Out kitchen

Specialized Trading &

Contracting Co.

Not Specified 2011 Wajba

Specialized Trading & Contracting Co.

QA

Villa

Ahmad Al Shamali

Contracting & Services

World Connection Engineering Consultant

2010 Sayliyah

North

Ahmad Al Shamali Contracting &

Services QA

G+1 Villa Al Aaeed Trad.

& Cont. Co

Qatari Center Engineering Consultant

2010

Bani Hajir Al Aaeed Trad. &

Cont. Co QA

Al Rayyan Residential Compound

Al Finiqia Contracting &

Trading Co.W.L.L

ACE 2010

Al Finiqia Contracting &

Trading Co.W.L.L

GEOTECHNICAL INVESTIGATION



SERVICE REQUIRED BY

SCOPE OF WORK

G+1 Villa + Out Side

Kitchen Al – Garallah

Contracting Co. Al Qaws Engineering

Consulting 2010

Muither

Al – Garallah Contracting Co.

QA

G+1+Majlis+Out Kit +DR + Villa

Al Mustashar Trad. & Cont.

Co.


2010 Al Dafna Al Mustashar Trad.

& Cont. Co. QA

G+1 Villa

Al Mustashar Trad. & Cont.

Co.

Archi Home 2010

Ali Khalid

Al Mustashar Trad. & Cont. Co.

QA

2 No’s G+1 Villa Al Mustashar Trad. & Cont.

Co. Al Fajer Al Jadeed 2010 Izgawa

Al Mustashar Trad. & Cont. Co.

QA

G+1 Villa Al Mustashar Trad. & Cont.

Co.


2010 Al Kheesha Al Mustashar Trad.

& Cont. Co. QA

(G+1+P) Villa Al Saamh Trading &

Contracting Co.

Al Suraya EngineerinConsultant

2010

Bani Hajir Al Saamh Trading & Contracting Co.

QA

(G+1+P) 2 Villa Al Saamh Trading &

Contracting Co

Al Suraija Eng. Consultant

2010 Nasser Al Saamh Trading & Contracting Co

QA

(G+1+P) Villa

Al Saamh Trading &

Contracting Co.

Qatar Consultant Engineering Centre

2010

Shahaniya

Al Saamh Trading & Contracting Co.

QA

22 Villas Compound Athar Building &

Development Co.

United Consultant 2010 Muaither Athar Building & Development Co.




SERVICE REQUIRED BY

SCOPE OF WORK

2 Villas Al Banai Trading

& Contracting Co.

Al Shaheen Engineering Consultant

2010 Al Muraikh Al Banai Trading &

Contracting Co. QA

4 Villas +Majlis Al Banai Trading

& Contracting Co

Al AQSA Engineering Consultancy

2010 Al Khesa Al Banai Trading &

Contracting Co QA

Villa Bin Ghosn

Trading Est. Universal Design

Center 2010 Al Sailiya

Bin Ghosn Trading Est.

QA

G+1+P.H Villa Bin Hameed For



2010 Shahanniya Bin Hameed For


QA

(B+G+1+P.H+Out Kitchen) 2 Villa


Project Qatari Center 2010 Maizer


Project QA

G+1 Villa Bin Thawab For


Al Quis Engineering Consultant

2010 Sailiya Bin Thawab For


QA

Proposed Villa (G+1+P.H)

Construction Development Contracting &

Trading

Shua’a Consulting Engineering

2010 Al Hilal


Trading

QA

Proposed Additional (G+1+P) Villa


Trading

Al Nile Engineering Consultant

2010 Al Rayyan


Trading

QA



SERVICE REQUIRED BY

SCOPE OF WORK

(G+1+P Villa +K+M)


Trading


2010

Al Rayyan


Trading

QA

8 Villa Compound Continent

Engineering Enterprises.

Al Nile Consultancy 2010 Al Dafna

Continent Engineering Enterprises.

QA

Proposed B+G+2 Office Building (Opposite Lulu)


Not Specified 2010 Al –Emadi

Engineering QA

Palace Al –Emadi

Engineering Qatari Home 2010 Nouija


QA

(G +1+P) Villa Al –Emadi

Engineering

Al Gazeerah Engineering Consultant

2010 Al Wakra Al –Emadi

Engineering QA

G+1+P.H Villa + Outside Kitchen

Al Gazzera Contracting Trading Co.

Al Saraiya Engineering Consultant

2010 Banihages Al Gazzera Contracting Trading Co.

QA

B+G+7 Building Hadico

Contracting & Trading Co.

Al Waha Design & Consultants

2010 Binhamoud

BM 4 Hadico Contracting

& Trading Co. QA

G+5 Building Hadico



2010 Binhamoud


& Trading Co. QA

Markhiya Complex Ismail Bin Ali Not Specified 2010 Markhiya Ismail Bin Ali QA



SERVICE REQUIRED BY

SCOPE OF WORK

Al Emadi Mosque Ismail Bin Ali Qatari Home 2010 Thumama Ismail Bin Ali QA

Labor Accommodation,

Store & Office

Insha Trading & Contracting Co.

Diwan Engineering Consultant

2010 Industrial

Area, Street 42.


QA

Mosque Insha Trading & Contracting Co

AWQAF 2010 Sailiya Insha Trading & Contracting Co

QA

Mosque Insha Trading & Contracting Co

AWQAF 2010 Shahanniya

Insha Trading & Contracting Co

QA

Labor Accommodation


Contracting Co Not Specified 2010

Industrial Area


QA

(P080 – EPC) Warehouse Facilities

Expansion Project

Imperial Trading & Contracting

Co. Q.D.C 2010

Imperial Trading & Contracting Co.

QA

Birla Public School Imperial Trading

& Contracting Co.

Al Saad Consulting Engineering

2010 Abu Hamour Imperial Trading &

Contracting Co. QA/QC

Secondary Girls School Building. No 07


Co.

Consulting Engineering Group

(CEG) 2010 Al Amir


QA/QC

School Building. No 14 Imperial Trading

& Contracting Co.


(CEG) 2010 Sailiya


QA/QC

G+1 Villa Al Kharj Trad. &

Cont. Co.

Al Faisal Sarafe Consulting

Engineering 2010 Ain Khalid


QA



SERVICE REQUIRED BY

SCOPE OF WORK

G+1 +P Villa M.A. Trading Co. Not Specified 2010 Al Wakra M.A. Trading Co. QA

G+1 +P Villa Imperial Trading

& Contracting Co.

Not Specified 2010 Umm Salal


QA

G+1+P.H Villa Imperial Trading

& Contracting Co.

ATAK 2010 Abu Hamour Imperial Trading &

Contracting Co. QA

G+1+P.H Villa +Outside Kitchen


Sketch Engineering Consultant

2010 Abu Hamour Al Kharj Trad. &

Cont. Co. QA

G+1 Villa M.A. Trading Co. Qatari Home 2010 Al Keesha M.A. Trading Co. QA

2No’s Villa G+1+P.H+Outside

Kitchen


Co. Not Specified 2010 Al Wakir


QA

Villa + Majlis + Basement + Guard

Room


Co.

Salman Engineering Consultant

2010 Umm Salal Imperial Trading &

Contracting Co. QA

Villas (G+1+P.H) Al Kharj Trad. &

Cont. Co. Not Specified 2010 Muither


QA

B+G+1 Villa M.A. Trading Co. Lusail Engineering

Consultant 2010 Bani Hajir M.A. Trading Co. QA

Villa MSK Trading & Contracting Co.

SWA 2010 Pearl Qatar MSK Trading & Contracting Co.

QA



SERVICE REQUIRED BY

SCOPE OF WORK

B+G+1 Villa Street 04,Plot No 03


SWA 2010

West Bay Lagoon


QA

3 Unit G+1+P Villa MSK Trading & Contracting Co.

SWA 2010 West Bay Lagoon


QA

Qtel work w-o No.52688

Naama Contracting &

Trading Co. Q-Tel 2010 Al Rayyan

Naama Contracting & Trading Co.

QA

Qtel work w-o No.53162

Naama Contracting &

Trading Co. Q-Tel 2010 Abu Hamour

Naama Contracting & Trading Co.

QA

Al Meera Shopping Mall

Noors Engineering


(CEG) 2010 Abu Nakla Noors Engineering


G+1 Villa Olombya Trad.

& Cont. Co.


2010 Al Waab Olombya Trad. &

Cont. Co. QA

G+1 Villa Olombya Trad.

& Cont. Co.


2010 Muraikh Olombya Trad. &

Cont. Co. QA

(G+1) Villa + Majlis + Outside Kitchen

Project Engineering


Qatar Consulting Engineering Center

2010 Project


QA



SERVICE REQUIRED BY

SCOPE OF WORK

(G+1) Villa + Majlis + Outside Kitchen

Project Engineering


Al Mana Design & Consultant

International 2010 Dafna

Project Engineering Works & Cont. Company

QA

2Villa (G+1+P.H)

Project Engineering


Archi Home

2010 Al Hilal Project


QA

Villa (G+1)+Out Kitchen

Project Engineering


Archi Home 2010 Al Hilal Project


QA

Villa (B+G+1+P.H)+Outside

Kitchen

Project Engineering


Horizons Engineering 2010 Muaither Project


QA


Kitchen

Project Engineering


Al Qouse Engineering 2010 Al Wakra Project


QA

Al Dayeem Park Qatar & Gulf Enterprises

United Engineering Consultant

2010 Al Kheesa Qatar & Gulf Enterprises

QA

Al Daayen Package 02 Park 04

Qatar & Gulf Enterprises

Al Aqsa Engineering Consultant

2010 Al Kheesa Qatar & Gulf Enterprises

QA

(G+1+P.H) Villa + K. Block + Guard Room

Qatar Engineering

Al Sariya Engineering Consultant

2010 Kharatiyath Qatar Engineering

Business Co. QA



SERVICE REQUIRED BY

SCOPE OF WORK

Mosque No 17 Qatar

Engineering Company

AWQAF 2010 Abu Sidra Qatar Engineering

Company QA

Villa +Out Kitchen Qatar

Engineering Company

Shuaa Consulting Engineering 2010

Rawdet El Hamam

Qatar Engineering Company

QA

(G +1) Villa + Majlis +Outside Kitchen

Qatar Engineering

Company Mansour El Mansour 2010

Dhel El Hamam


QA

Mosque No 149 Qatar

Engineering Company

AWQAF 2010 Al Doha Qatar Engineering

Company QA

2 Villa +Outside Kitchen

Qatar Engineering

Company

Shuaa Consulting Engineering

2010 Old Air Port Qatar Engineering

Company QA

Villa +Out Kitchen Qatar

Engineering Company


2010 Rawdet El Hamam


QA

G+1 Villa QLine Trad. &

Cont. Co. Salman Engineering

Consultant 2010 Muither

QLine Trad. & Cont. Co.

QA

G+1 Villa QLine Trad. &

Cont. Co. Salman Engineering

Consultant 2010 Al Kheesha

QLine Trad. & Cont. Co.

QA

Mosque Al Raied Trading &

Contracting Co.


2010 Al Wakra Al Raied Trading &

Contracting Co. QA

(G+1.P.H)Villa Al Raied Trading &

Contracting Co.



63)


QA



SERVICE REQUIRED BY

SCOPE OF WORK

G+1Villa +Majlis & K Block

Al Raied Trading &

Contracting Co.



65)


QA

(G+1.P.H)Villa Al Raied Trading &

Contracting Co.



52)


QA

G+1.P.H)Villa Al Raied Trading &

Contracting Co.

Shuaa Engineering Consultant 2010

Al Wakra (Site No -

58)


QA

2No’s (G+1.P.H)Villa Al Raied Trading &

Contracting Co.


2010 Al Thumama Al Raied Trading &

Contracting Co. QA


Contracting Co.



60)


QA


Contracting Co.



61)


QA


Contracting Co.



62)


QA

(G+1+PH) Villa +Out kitchen & G Room

Al Raied Trading &

Contracting Co.



64)


QA

41 Villas Compound Real Estate

Constructing Company

EGEC Qatar for Engineering Consultants

2010 Muither

South

Real Estate Constructing

Company QA



SERVICE REQUIRED BY

SCOPE OF WORK

(G+1+P.H Villa

+Outside Kitchen + G.H)

Saba Engineering


2010 Ain Khalid Saba Engineering QA

2 Villa Samar Trading & Contracting Co.

Shua’a Engineering Consultant

2010 Abu Hamour Samar Trading & Contracting Co.

QA

G+1+Outside Kitchen+ Guard Room

Al Sami Trading & Contracting

Arts &Engineering 2010 Duhail


QA

G+1+P Villa & Out Block


Arts &Engineering 2010 Jelaiah Al Sami Trading &

Contracting QA

2No’s Labour Accommodation


Contracting EST. Not Specified 2010

Industrial Area


QA

Friday Mosque Al Shaibi &


Arabian Engineers Consultant

2010 Al Wakra Al Shaibi & Rihan Contracting Co.

QA

(G+1+PH) Villa Specialized Trading &

Contracting Co. Not Specified 2010 Muither


QA

(G+1+PH) Villa Specialized Trading &

Contracting Co. Not Specified 2010 Muither


QA

4 villa A’yaan Ash-


Not Specified 2009 Al-Aziziya A’yaan Ash-Sharq for Constructions

QA

Al Salam 4 Building A’yaan Ash-


United Architectural Consultant

2009 Al Merghab A’yaan Ash-Sharq for Constructions

QA



SERVICE REQUIRED BY

SCOPE OF WORK

Villa

Ahmad Al Shamali


Art & Engineering Consultant

2009 West Al Nasriy


Services QA

Villa

Ahmad Al Shamali


Arts & Engineering Consultant

2009 Sayliyah

North


Services QA

SH. Mounira Residential Complex t

Al Rabat Building

Contracting Co

M/S James Cubitte & Partners, Consultant

Engineers 2009 Al Sadd

Al Rabat Building Contracting Co

QA

(G+1+P) Villa Al Saamh Trading &

Contracting Co

Al Qatar Engineering Consultant

2009

Muaither Al Saamh Trading & Contracting Co

QA

163 Villas Compound Athar Building &

Development Co.


2009 Al Merikh Athar Building & Development Co.


Proposed Mosque Badar Al Hazek Arabian Architectural

Consultancy Group 2009 Al Muraikh Badar Al Hazek


Substation no 01 Badar Al Hazek Qatar Engineers

Associates 2009 Bin Omran Badar Al Hazek QA/QC

3 Villa Al Banai Trading

& Contracting Co

Al AQSA Engineering Consultancy

2009 Al Wasil Al Banai Trading &

Contracting Co QA

Villa + Kitchen Al Brunziya

Contracting Co. Al Hasba Engineering

Consultant 2009

Umm Salal Ali

Al Brunziya Contracting Co.

QA



SERVICE REQUIRED BY

SCOPE OF WORK

6 No’s Villa (G+1+P.H)


Trading

Al Qwas Engineering Consultant

2009 Al Rayyan


Trading

QA

( B+G+7 ) Apartment Building


Trading

Al Gazeera Engineering &

Consultant 2009 New Doha


Trading

QA

Air Port Building Al –Emadi

Engineering Qatari Home 2009


QA

12 Villa Al –Emadi

Engineering Qatari Home 2009 Nouija


QA

G+1+P.H+ Villa +Out Kit+Out


Al Neil Consulting Engineering

2009 Majlis Sailiya


QA

G+1+P.H Villa Gulf Star Trading &

Contracting Co.

Al Qaws Engineering Consultant

2009 Bani Hager Gulf Star Trading &

Contracting Co. QA

G+1 Villa Gulf Star Trading &

Contracting Co.



Contracting Co. QA

Public House Gulf Star Trading &

Contracting Co.



Contracting Co. QA

G+1+P.H Villa 1 No. Hadico


Al Saad Engineering Consultant

2009 Ain Khalid Hadico Contracting

& Trading Co. QA



SERVICE REQUIRED BY

SCOPE OF WORK

G+4 Building Hadico


Al Fardan Real Estate Co

2009 Binhamoud


& Trading Co. QA

(G+1+P)Villa + Outside Kitchen

Hadico Contracting &

Trading Co.


2009 Al Dafna Hadico Contracting

& Trading Co. QA

Industrial Area – Street 27


Trading Co.

Al Waha Design & Consultants 2009

Industrial Area –

Street 27

Hadico Contracting & Trading Co.

QA

B+1+P Villa Hadico



2009 Markhiya Hadico Contracting

& Trading Co. QA

2 No (G+1+P) Villa Hadico



2009 Maither Hadico Contracting

& Trading Co. QA

Mosque Hadico


AWQAF 2009 Muaizer Hadico Contracting

& Trading Co. QA

(G+1+P) Villa Hadico


Al Qaws Consultants 2009 Neijah Hadico Contracting

& Trading Co. QA

7 Villa Compound Hadico



2009 Old Rayyan Hadico Contracting

& Trading Co. QA

(B+G+1+P.H) Palace Hadico


Al Shaheen Engineering

2009 Rayyan Hadico Contracting

& Trading Co. QA



SERVICE REQUIRED BY

SCOPE OF WORK

Proposed G+M Mosque,


Trading Co

Mosque Affairs Department

2009 Thumama Hadico Contracting

& Trading Co QA

G+5 Building Hadico


Al Quas Consultant & Engineers

2009 Umm

Ghawalina Hadico Contracting

& Trading Co. QA

2 Building Ismail Bin Ali Not Specified

2009 Nauja Site

No 128 Ismail Bin Ali QA

Dar Al Hekma Ismail Bin Ali Qatari Homes 2009 Al Hilal Site

No 130 Ismail Bin Ali QA

School Ismail Bin Ali Al Taameer Engineering Consultant

2009 Abu Hamuor Ismail Bin Ali QA

Al Shamal Sports Club Project


Projacs Engineering Consultant

2009 Al Shamal Insha Trading & Contracting Co.

QA

Completion of Construction for

School No 23. of 23



(CEG) 2009 Najma


QA

Hejen Racing Committe


Contracting Co Not Specified 2009 Lebseyyar


QA

38 Villa Imperial Trading

& Contracting Co.

SWA 2009 University

Area Imperial Trading &

Contracting Co. QA

Printing Press Imperial Trading

& Contracting Co.

DARA Engineering Consultant

2009 Industrial

Area Imperial Trading &

Contracting Co. QA



SERVICE REQUIRED BY

SCOPE OF WORK

Qatar Cool Imperial Trading

& Contracting Co.

Dar 2009 West Bay (Near City

Center)


QA

Al Iman Girls Secondary School

Building. No 01


Co.


(CEG) 2009 Al Mamoura


QA

DPS Modern Indian School


Co.

Optimum Design 2009 Al Wakra


QA

Lusail Stock Pile Area JTH Equipment

Company Qatar Primary Materials Co.

2009 Lusail JTH Equipment

Company QA

Concrete Racks For Seashore

JTH Equipment Company

2009 Ras- Laffan JTH Equipment

Company QA

12 Villa Al Kharj Trad.

&Cont. Co. Arabia Consulting

Engineering 2009 Al Ghanim

Al Kharj Trad. &Cont. Co.

QA

Site No 166 Al Kharj Trad. &

Cont. Co. Al Aqsa Engineering

Consultancy 2009 Al Saad


QA

Site No 168 Al Kharj Trad. &

Cont. Co. Al Hasbag Consulting

Engineering 2009 Al Aziziya


QA

G+1+P Villa M.A. Trading Co. Shua’a Engineering

Consultant 2009 Sailiya M.A. Trading Co. QA

G+1+P Villa M.A. Trading Co. Not Specified 2009 Ain Khalid M.A. Trading Co. QA

G+1+P Villa +Out Kitchen

M.A. Trading Co. Not Specified 2009 Umm Salal M.A. Trading Co. QA

G+1 Villa M.B.K.

Contracting Co. Not Specified 2009 Al Aziziya

M.B.K. Contracting Co.

QA



SERVICE REQUIRED BY

SCOPE OF WORK

G+1) 33 Villa + Club

House M.B.K.

Contracting Co M.K Mohd 2009 Muither

M.B.K. Contracting Co

QA

Villa G+1+P M.B.K.

Contracting Co Eng. Ahmed 2009 Al Rayyan


QA

5Villas (G+1+P)+ S.P +Extension

Mohd. International

Group

Sketch Engineering Consultant

2009 Duhail Mohd.

International Group

QA

4 Villa Mohd.

International Group

Sketch Engineering Consultant 2009 Duhail

Mohd. International

Group QA

G+1+P.H) Villas + Ext Mohd.

International Group

Al Fajir Engineering & Consultant

2009 Azghawa Mohd.

International Group

QA

Construction Of Cement Silo & Cement

Packing Unit



2009 Massaed MSK Trading & Contracting Co.

QA

Proposed Staff Accommodation &

Coast Guard Accommodation

Noors Engineering

P W A 2009 Al Arish Noors Engineering QA

Construction & Communication

Complex

Noors Engineering

Engineering Main Trance Division

2009 Doha City Noors Engineering QA

Block for Ar-moured Vehicle

Noors Engineering

Army Forces 2009 Duhailiyath Noors Engineering QA

Civil Defense Station Noors

Engineering Ministry of Interior 2009

Umm Ghuwailina

Noors Engineering QA



SERVICE REQUIRED BY

SCOPE OF WORK

Police Station and

Service Block Noors

Engineering Ministry Of Interior 2009 Messaimeer Noors Engineering QA

Civil Defense Building Noors

Engineering Qatar Petroleum 2009

Qatar Foundation

Noors Engineering QA

Headquarter Building Noors

Engineering Q A F 2009 Shahaniya Noors Engineering QA

Development Of Ain Khalid Grave Yard

Noors Engineering

PWA 2009 Ain Khalid Noors Engineering QA

Villa (G+1+P.H) Project

Project Engineering


Doha Design Centre 2009 Al Ghanim Project


QA

Villa (B+G+1+P.H)+Outside

Kitchen

Project Engineering


Qatari Homes 2009 Project


QA

38 Villa Qatar & Gulf Enterprises


2009 Umm Salal Qatar & Gulf Enterprises

QA

Administration Building


Qatari Home 2009 Al Waab Qatar & Gulf Enterprises

QA

2 Villa Qatari Emarati


Al Aqsha Engineering Consultant

2009 Ain Khalid Qatari Emarati


QA

(G+1) Villas Qatari Emarati


Al Gazeerah Consulting


Qatari Emarati Trading &

Contracting Co. QA



SERVICE REQUIRED BY

SCOPE OF WORK

(G+1) 2Villas Qatari Emarati


Al Gazeerah Consulting


Qatari Emarati Trading &

Contracting Co. QA

G+1 Villa +Outside Kitchen

Qatar Engineering

Company


2009 Dafna Qatar Engineering

Company QA

(G +1+P.H) Villa Qatar

Engineering Company

Al Madina Consultant 2009 Duhail Qatar Engineering

Company QA

12 Villa Qatar

Engineering Company

ATAK Consulting Engineering

2009 Al Gharafa Qatar Engineering

Company QA

13 Villa Qatar

Engineering Company


2009 Al Gharafa Qatar Engineering

Company QA

2 Villa + 2 Mosque Qatar

Engineering Company


2009 West Al Khissa


QA

4(G +1) Villa +Outside Kitchen

Qatar Engineering

Company


2009 Umm

Obariya Qatar Engineering

Company QA

Dukhan Apartment Tower (B+G+32)

Red Line Co. Arab Engineering

Bureau 2009 West Bay Red Line Co.


03No’s (G+1+P) Villas Outside Kitchen

Rivera Trading & Co Cont CanContracting Company

Archi Home Engineering Consultant

2009 Fereej Al

Asiri

Rivera Trading & Co Cont CanContracting Company

QA



SERVICE REQUIRED BY

SCOPE OF WORK

Proposed (G+1+P) Villa

Rivera Trading & Contracting Company

Universal Design Centre

2009 Fereej Al

Asiri


QA

B+G+M+06 Floor Hotel


Al Sadd Engineering Consultant 2009 Al Saad


QA

G+1 Villas + Outside Kitchen

Sanoobar Trading &

Contracting Co.

Qatari Engineering & Consulting Centre

2009 Ain Khalid Sanoobar Trading & Contracting Co.

QA

3 Villa Sanoobar Trading &

Contracting Co.

Qatari Engineering & Consulting Centre

2009 Maraih Sanoobar Trading & Contracting Co.

QA

G+1 Villas Seqliya

Engineering & Contracting EST.

Not Specified 2009 Bani Hajir Seqliya Engineering & Contracting EST.

QA

14 Villas Compound Project


Contracting EST. SWA 2009


QA

Masque DM-11 I/X Type 5

Al Shaibi & Rihan

Contracting Co. AWQAF 2009 Abu Sidra

Al Shaibi & Rihan Contracting Co.

QA

Masque DM-5,I45A Al Shaibi &


AWQAF 2009 Ain Khalid Al Shaibi & Rihan Contracting Co.

QA



SERVICE REQUIRED BY

SCOPE OF WORK

Masque DM10 IH Type 5 , MH Type 1

Al Shaibi & Rihan

Contracting Co. AWQAF 2009 Al Gharafa


QA

Extension of M-915 Al Shaibi &


AWQAF 2009 Azghawa Al Shaibi & Rihan Contracting Co.

QA

Masque DM-5 Al Shaibi &


AWQAF 2009 Aziziya


QA

Main Entrance Work CID Office

Al Shaibi & Rihan

Contracting Co. Darwish 2009 West bay


QA

Proposed I/H Type -1 Existing Mosque DM 5

Simplex Trading & Contracting

Co. AWQAF 2009 Kharthiyat

Simplex Trading & Contracting Co.

QA

Proposed G+1+P 2 Villa at

Aisha A. Azizs

Al Tabadol Trading &

Contracting Co.

UDC Universal Design Center

2009 Al Saad Al Tabadol Trading & Contracting Co.

QA

Mosque Insha Trading & Contracting Co.


2008 Al Khissa Insha Trading & Contracting Co.

QA

Villa Complex & Facilities


Contracting Co

Al Waha Design & Engineering Consultant

2008 Al Markiya Island Sea Trading & Contracting Co

QA



SERVICE REQUIRED BY

SCOPE OF WORK



Contracting Co


2008 Al Gharrafa Island Sea Trading & Contracting Co

QA

Lolowa Hamad Island Sea Trading &

Contracting Co


2008 Al –Sulaiti Island Sea Trading & Contracting Co

QA

38 Villa Complex Island Sea Trading &

Contracting Co Not Specified 2008 Meharija



Extension of Al Waha & Al Dhakira Clubs


Co. Not Specified 2008 Al Dhakira


QA

Site 155 Al Kharj Trad. &

Cont. Co. Faisel Sharup 2008 Dafna


QA

Proposed Resi & Commer. Dev.

ITCC South West Arch. 2008 Messaimer ITCC Soil Investigation

& QA

Villa +Kitchen M.B.K.

Contracting Co. Sketch Engineering

Consultant 2008 Abu Hamour


QA

Villa G+1 and Out Kitchen + Guard room


Not Specified 2008 Al Aziziya M.B.K. Contracting

Co. QA

G+1+ Out Kitchen 2 Villas


Not Specified 2008 Al Garrafa M.B.K. Contracting

Co QA

G+1+Out Majlis +Outside Kitchen


Not Specified 2008 Khalifa

Stadium M.B.K. Contracting

Co QA

41 Villa + Club House M.B.K.

Contracting Co Not Specified 2008 Muither


QA



SERVICE REQUIRED BY

SCOPE OF WORK

G+5 M.B.K.


Umm Ghalina


QA

Building (B+G+1+P) Mohd.

International Group

El Hassbaa 2008 Frij Kuleeb

Mohd. International

Group QA

Villas (G+1)Extension Mohd.

International Group

Qatari Center For Consulting

Engineering 2008 Sailiyah

Mohd. International

Group QA

B+G+M+6 Office Building


SWA 2008 Al Ghanim MSK Trading & Contracting Co.

QA

Aluminum Factory MSK Trading & Contracting Co.

Lusail Engineering Consultant

2008 Industrial

Area MSK Trading & Contracting Co.

QA

GTC – 113 Noors

Engineering G.H.D 2008 Bani Hajer Noors Engineering QA

GTC 113 /2006 TFS Noors

Engineering G.H.D 2008 Al Gharafa Noors Engineering QA

Al Maha & Additional Building

Noors Engineering

PWA 2008 Shahaniya Noors Engineering QA

GTC- 113 Noors

Engineering GHD 2008 Shahaniya Noors Engineering QA


GHD 2008 Al Rayyan Qatar & Gulf Enterprises

QA


Not Specified 2008 West Bay Qatar & Gulf Enterprises

QA



SERVICE REQUIRED BY

SCOPE OF WORK

4 Villa Old Air Port

Qatar Engineering,

Planning &Const. Co.

Senmar Design Consultant

2008 Qatar Engineering, Planning &Const.

Co. QA

4 Villa EPC Qatar. Al Shuaa Engineering

Consultant 2008

Umm Obariya

EPC Qatar. QA

Ground Floor Villa & Out Building

Qatar Engineering Business Co.

Al Course Engineering Consultant

2008 Smisma Qatar Engineering

Business Co. QA

G+1 Villa Qatar

Engineering Business Co.


2008 Azgawa Qatar Engineering

Business Co. QA




2008 Nauja Qatari Emarati


QA



Al Tameer Engineering Consultant

2008 Al Waab Qatari Emarati


QA

G+3 Building Qatar

Engineering Company


2008 Bin Omran Qatar Engineering

Company QA

G+1 Villa Qatar

Engineering Company


2008 Dafna Qatar Engineering

Company QA

G +1) Villa Qatar

Engineering Company


2008 Duhail Qatar Engineering

Company QA



SERVICE REQUIRED BY

SCOPE OF WORK

Labour Accommodation

Qatar Engineering

Company


2008 Industrial

Area Qatar Engineering

Company QA


Engineering Company


2008 Al Dafna Qatar Engineering

Company QA


Engineering Company

Shuaa Consulting Engineering 2008 Al Khissa


QA

Proposed Multi Story Complex

Shorrouq For Urban

Development Not Specified 2008 West Bay

Shorrouq For Urban

Development Soil Investigation

Villa + Majlis + Kitchen + Boundary Wall

Qatar Engineering

Company


2008 Ain Khalid Qatar Engineering

Company QA

Proposed Mosque Badar El Hazk Not Specified 2008 Moraikh Badar El Hazk Soil Investigation

Executive Apartment (B+G+12)

Red Line Co. GHD 2008 Umm

Ghalina Red Line Co. QA

Dukkhan Tower Red Line Co. GHD 2008 City Centre Red Line Co. QA

Villa Compound and Club House


Al Waha Design & Consultant

2008 Muaither

North


QA

2 Villas Saba

Engineering Baitak Real Estate

Development 2008 Aziziya Saba Engineering QA



SERVICE REQUIRED BY

SCOPE OF WORK

G+1)7 Villa Saba

Engineering Al Hasbag Consulting

Engineering 2008 Ain Khalid Saba Engineering QA

B+G+7 + Service floor building



2008 Al Sami Trading &

Contracting QA

B+G+1 Villas Sanoobar Trading &

Contracting Co.

Al Qos Consulting Engineering

2008 Bani Hajir Sanoobar Trading & Contracting Co.

QA

B+G+7 Building Al Shaibi &


Al Waha Design & Consulting 2008

Bin Mahmoud


QA

G+1 Villa + Outside Kitchen

Al Shamali Engineering Co.

Not Specified 2008 Muaither Al Shamali

Engineering Co. QA

62 Villa Al Tabadol Trading &

Contracting Co.

C E G Consulting Engineering Group

2008 Abu Hamour Al Tabadol Trading & Contracting Co.

QA

Proposed G+1+P Typical Villa

Al Tabadol Trading &

Contracting Co. Not Specified 2008 Abu Hamour

Al Tabadol Trading & Contracting Co.

QA

62 Villa Al Tabadol Trading &

Contracting Co. White – Yang Qatar 2008

Abu Hamour Phase I


QA

Al Manea Complex A’yaan Ash-


Baitak Real Estate Devotement

2007 Al Sadd A’yaan Ash-Sharq for Constructions

QA

B+G+3 Frig A’yaan Ash-


Baitak Real Estate Devotement

2007 Al Nasar A’yaan Ash-Sharq for Constructions

QA



SERVICE REQUIRED BY

SCOPE OF WORK

G+1 Villa Al Ried Co. ATAK 2007 Al Wakra Al Ried Co. QA

240 Villa + 10 Apartment Buildings

Athar Building & Development

Co.

South West Architecture 2007 Al Garaffa

Athar Building & Development Co.

QA

Al Faisel Tower II Badar Al Hazek SYNA 2007 Doha Badar Al Hazek GEOTECHNICAL INVESTIGATION

Retaj Hotel Badar Al Hazek United Consultants 2007

Badar Al Hazek


Al Jadeed 20 villas


Trading

El Nour Consulting Group

2007 Al Rayyan


Trading

QA

36 Villa Hadico



2007 Al Waab Hadico Contracting

& Trading Co. GEOTECHNICAL INVESTIGATION

B+G+7, 3 Building Hadico


Ismail Bin Ali 2007 Bin

Mahmoud Hadico Contracting

& Trading Co. GEOTECHNICAL INVESTIGATION

Industrial Area – 45 Hadico


Ashraph Ahmad 2007 Industrial Area – 45

Hadico Contracting & Trading Co.

QA

B+G+3 Hadico


Nabil 2007 Matar -13 Hadico Contracting

& Trading Co. QA

Matar -15 Hadico


Mr Amna Mohamed Abdulla

2007 Matar -15 Hadico Contracting

& Trading Co. QA



SERVICE REQUIRED BY

SCOPE OF WORK

Proposed (B+G+3) Hotel Suit Building


Trading Co.

Al Shaheen Engineering

2007 Matar 16 Hadico Contracting

& Trading Co. QA

B+G+6 Floor Hadico


ASAS Engineering Consultant

2007 Muntaza Hadico Contracting

& Trading Co. QA

Residential Compound Ismail Bin Ali Not Specified

2007 Ain Khalid,

Phase II Ismail Bin Ali QA



Contracting Co

Arabian Architectural Group

2007 Al Gharrafa Island Sea Trading & Contracting Co

QA

138 Villa Imperial Trading

& Contracting Co.

SWA 2007 Mesaimeer Imperial Trading &


Al Waab City Showroom A,C,D & E


Co. Not Specified 2007 Al Waab



6Nos, G+1+P Villas Imperial Trading

& Contracting Co.

Al Mana Consulting Group

2007 Mesaimeer Imperial Trading &

Contracting Co. QA

Qafco Lab Extention Imperial Trading

& Contracting Co.

Qatar Fertiliser Co. (S.A.Q)

2007 Umm side Imperial Trading &

Contracting Co. QA

6 Villa Al Kharj Trad. &

Cont. Co. Arabia Consulting

Engineering 2007 Al Ghanim


QA

G+1) Villa M.A. Trading Co. Not Specified 2007 Madinat Khalifa

M.A. Trading Co. QA



SERVICE REQUIRED BY

SCOPE OF WORK

G+1 4 Villa M.B.K.

Contracting Co. Not Specified 2007 Ain Khalid


QA

B+G+M+7 M.B.K.


Bin Mahmoud


QA

G+1+Outside Kitchen M.B.K.

Contracting Co Not Specified

2007 Dafna M.B.K. Contracting

Co QA

G+1+ Outside Kitchen M.B.K.

Contracting Co Not Specified 2007 Duhail


QA

G+1 + Out Kitchen M.B.K.

Contracting Co Not Specified 2007 Nasriya Villa


QA

2Villas (G+1) Mohd.

International Group

Beetik Real Estate 2007 Frij Soudan Mohd.

International Group

QA

Industrial Area Al Muwash Trading Co

Al Waha Consultant 2007 Industrial

Area Al Muwash Trading

Co QA

Al Khor Q -Tel Work Naama


Not Specified 2007 Al Khor Naama Contracting

& Trading Co. QA

CGIS Station Noors

Engineering

Urban Planning & Development

Authority 2007 Noors Engineering QA

Office Building at The Police Main Stores

Yards

Noors Engineering

Ministry Of Interior 2007 Sailiya Noors Engineering QA

Proposed Mosque & Body Washing Area

Noors Engineering

PWA 2007 Umm Salal Noors Engineering QA

(B+G+10) Residential Building (Tower site)


Al Sadd Consultant 2007 Qatar & Gulf Enterprises




SERVICE REQUIRED BY

SCOPE OF WORK

G+3 Labour

Accommodation Qatar & Gulf Enterprises

Petra Design 2007 Industrial

Area Qatar & Gulf Enterprises

QA

3 Villas

Qatar Engineering,

Planning &Const. Co.


2007 Muazer Qatar Engineering, Planning &Const.

Co. QA

130 Villas Complex QBEC Southwest

Architecture 2007 Al Waab QBEC



Majlis+Outside Kitchen

Al Zakharet Trading &

Contracting Co.

Al Shaheen Consultant Engineering

2007 Al Murra Al Zakharet Trading & Contracting Co.

QA

G+2 Stores Qatar

Engineering Company

SUHA 2007 Industrial

Area Qatar Engineering

Company QA

01 Villa + Out Majlish + Kitchen

Qatar Engineering

Company

Universal Design Center

2007 Izghawa Al

Rayyan Qatar Engineering

Company QA

G+6 Building Qatar

Engineering Company

Top Design 2007 Umm

Ghalina Qatar Engineering

Company QA

Proposed (G+1) Villa + Outside Kitchen

Red Line Co. ATAK 2007 Al Wakra Red Line Co. QA

(2B+G+M+10) Storey Red Line Co. Not Specified 2007 Najma Red Line Co. QA

Flats Building G+5 Rivera Trading &

Contracting Company

Al Sraiya Engineering Consultant

2007 Al Saad Rivera Trading &

Contracting Company

QA



SERVICE REQUIRED BY

SCOPE OF WORK

6 No. Attached G+1 villa


Al Ryane consultant Engineering

2007 Muither Rivera Trading &

Contracting Company

QA

Store, G+2 & G+3 Accommodation


Al Sadd Engineering Consultant 2007

Industrial Area St- 43


QA

Quran Teaching Centre


Ashgal 2007 Al Mirqab Rivera Trading &

Contracting Company

QA

(G+1)+Outside Kitchen Villa


The Office of Design & Consultant Engineering

2007 Ain Khalid Al Sami Trading &

Contracting QA

Masque M-165 Al Shaibi &


PWA, Asghal, Building Affair

2007 Bin

Mahmoud Al Shaibi & Rihan Contracting Co.

QA

Doha Hilton Hotel Simplex

Infrastructures Ltd

MZ & Partners 2007 West Bay Simplex

Infrastructures Ltd GEOTECHNICAL INVESTIGATION

Proposed Majlish Al Tabadol Trading &

Contracting Co. Not Specified 2007 Abu Hamour


QA

P005, Doha International School


Trading

ATAK 2006 Madinat Khalifa


Trading



PROJECT OWNER CONSULTANT CONTRACTOR DESCRIPTION OUR CLIENT

OUR SCOPE OF WORK

Development of the Companions and Martyrs tombs site @ Mu’tah and

the Southern Mazar in Karak of Jordan

The Royal Commission for the reconstruction

of mosques and maqamat of

Companions and Martyrs

JV of Shbeilat Wa Badran Architects,

and Jedar Group for Design and Urban

Studies, and Teabah Consulting

Engineering.

Not assigned

The development of the region by designing 11

buildings and supplements with total built-up area of 13,000 m2, along with related

infrastructure and developed roads within

the project

Owner

Soil investigation and exploration for buildings through 73 boreholes with total depth of 424

meter length, along with soil

tests for developed roads within the

project

Design of Ramtha school for professional studies in

Ramtha of Jordan Ministry of Education Suboh Engineering

Not assigned Designing the school building and facilities

with total built-up area of 6,100 m2, along with

external works

Consultant

Soil investigation and exploration for the school through 20 boreholes with total depth of 121

meter length

Design of basic school of Jordan University Housing for females @ Jubeiha in

Amman of Jordan

Ministry of Education Coalition consulting engineering (Madi &

Partners)



external works

Consultant


meter length

Design of secondary school of Southern Al Hashimi for males in Amman of Jordan

Ministry of Education Coalition consulting engineering (Madi &

Partners



external works

Consultant


meter length

Design of basic school of Manshiet Bani Hasan for

females in Mafraq of Jordan Ministry of Education

Amra consulting engineering



external works

Consultant


meter length



OUR SCOPE OF WORK

Design of basic school of Al Mazzeh for females in

Mafraq of Jordan Ministry of Education

Amra consulting engineering



external works

Consultant


meter length

Design of secondary school of Rhaba for females in

Irbid of Jordan

Ministry of Education

The Arab Rally Bureau consulting

engineering



external works

Consultant


meter length

Design of Al Abdali commercial compound in

Amman of Jordan Jordan Islamic Bank

Amman Bureau of consulting

engineering and city planning

Not assigned Designing a commercial

compound with total area of 5,360 m2

Owner

Soil investigation and exploration for

the compound through 9

boreholes with total depth of 113

meter length

Design of basic school of Hamzah Bin Abdul Muttaleb for males in Irbid of Jordan

Ministry of Education The Arab Rally

Bureau consulting engineering



external works

Consultant


meter length

Design of basic school of Hamzah Bin Abdul Muttaleb for males in Irbid of Jordan

Ministry of Education The Arab Rally

Bureau consulting engineering



external works

Consultant


meter length



OUR SCOPE OF WORK

Design of basic school of Al Malek Al Nasser for males

in Ajloun of Jordan Ministry of Education


engineering



external works

Consultant


meter length

Design of basic school of Umm Maneia for females @ Suwaileh in Amman of

Jordan

Ministry of Education

Coalition consulting engineering (Madi &

Partners)



external works

Consultant


meter length

Design of Deir Aby Saeed school for professional

studies in Irbid of Jordan Ministry of Education Suboh Engineering



external works

Consultant


meter length

Design of residential compound @ Al Madinah Al

Riyadiyah Area in Amman of Jordan

Nidal Khuzaaie & Abdl Raouf Salah Co. for Housing Projects

Omar Sheikh Al Ard & Partners

Not assigned

Designing a residential compound consisting of 3 contiguous buildings of

96 apartments with a total built-up area of

15,022 m2

Consultant


the compound through 7


meter length

Design of the Pearl Sanitary Paper factory buildings @

Na’our in Amman of Jordan

The Pearl for Sanitary Paper Industry LLC

Al Basheer International for

Engineering

Not assigned

Designing the buildings of the factory with total built-up area of 6,500

m2, along with external works

Owner


all buildings through 22


meter length



OUR SCOPE OF WORK

Design of career housing buildings of National

company for engineering industries in Mafraq of

Jordan

National company for engineering industries


engineering

Not assigned

Designing the buildings of career housing project

as part of a multiple industries compound with a built-up area of 5,600 m2, along with

external works

Consultant


the buildings through 9


meter length

Design of Al Shakeriah basic school for females @ Wadi

Rum in Aqaba of Jordan Ministry of Education

Tabbaa Engineering Bureau

Not assigned

Designing the school building and facilities


external works

Consultant

Soil investigation through 4


meter length

Development of the mosque and shrine of the companion of the Prophet Jalil Abu Obeida Amer Ibn

Al Jarrah @ Northern Aghwaar in Jordan Valley

The Royal Commission for the reconstruction

of mosques and maqamat of

Companions and Martyrs

JV of Shbeilat Wa Badran Architects,

and Jedar Group for Design and Urban

Studies, and Teabah Consulting

Engineering.

Not assigned

The development of the region by designing 11

buildings and supplements with total built-up area of 5,500 m2, along with related

infrastructure and developed roads within

the project

Owner

Soil investigation and exploration for buildings through 19 boreholes with total depth of 116

meter length, along with soil

tests for developed roads within the

project Study of strengthening

aspects of excavations and control the movement of the foundational layers of

boundaries adjacent to draft General Directorate of

Bank of Jordan

Bank of Jordan JV of Jaafar Toukan Engineering Bureau

and C.C.C.

Al Faris General Contracting

Providing special technical study to

strengthen aspects of excavations, and to stop motion in the layers of walls adjacent to the constituent project

Contractor Technical studies and geotechnical

consulting

DOCUMENT CONTROL CENTERTE-RrM-TRL-o5-0003

REV, O

TRANSMITTAL 13-Dec-l 1

Pase 1 + Att.

Docunnnt Issue Status:

Fon Recono I ] to* coNsrRucloN FoR lHroBMaron FoR acrron

To:Mr. Bassam Al- SulaibiRegional Manager (Weigh System)Traffic TechDoha- Qatar

Subject : Weight Station for PE Containers

Please find following documents.

From:Mathew P. JosephRIM Group Supervisor

(TWR-05-0B80)

Wt;

Dec. 13, 201 1

acknowledge and return one copy of this transmittal to e-Chem, DCC)

,7rr/2o77

o dtqL,'

011

Received by

Title

Depadment

Date

lssued by: Mathew P. Joseph^ tlfr

RtM Group supervisor \iiil;r*rechnicat 01

*---

Your Ref, No. Doc. No. Rev Remarks

D

1

TransmittalDated 26-10-201 '1

Project Schedule Refer Q-Chem comments

TransmittalDated 26-10-20'1 1

Method StatementConstruction of Weight Scale

FoundationApproved with comments z

TransmiftalDated 26-10-2011

Method StatementWeioh l'rridoe I nsta llation 0 Approved with comments

TransmittalDated 26-10-2011

Materials submittalsListed within Transmittal Dated26-10-11 at ltem Section no. 5

"sub section A to L"

Approved allzlt


Company Profile \Al Arabiya Laboratories Approved


Gompany ProfileAl Wataniya Concrete for Ready

Mix ConcreteApproved

TL 3011-2011Daled 03-12-2O11

DrawingsListed within Transmittal numberTL 301 1-2011" ltem no. 1 to 7

0 Approved or psc.

TL 3114-2A11Dated 10-12-2011

Project ScheduleTE-PRJ-SHD-05-OOO1 0 Refer Q-Chem comments

TL 3131-2011/ Dated 12-12-2011

Data sheetMix Design

0 Approved nlrcl/ rL3141-2011' Dated 13-12-2011

Project ScheduleTE-PRJ-SHD.O5-OOO1 0 Approved fi f 12

TE-R I lvl-TRL-05-0003 Page '1 of 1

Al Arabiya Laboratories P.O. Box 38364, Doha - Qatar, E-Mail: [email protected]

Telephone: +974 4460 6103, Fax: +974 4464 5794

Date post:	06-May-2018
Category:	Documents
Upload:	truongtruc
View:	229 times
Download:	2 times