SF-TP10-3-96
©2020 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks,respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for themost current information. Revised: April 27, 2020
Page of 1 19
Tower Pipe Frame, 10 ft face, includes pipe
OBSOLETEThis product was discontinued on: July 31, 2015
Product ClassificationProduct Type Tower pipe frame
General SpecificationsMounting Pipe, 63.5–203.2 mm (2-1/2 in to 8 in) OD
Pipe, quantity 3
Tower Taper Non-tapered
DimensionsHeight 2,438.4 mm | 96 in
Face Width 3.2 m | 10.5 ft
Width 3,200.4 mm | 126 in
Length 254 mm | 10 in
Pipe Length 2,438.4 mm | 96 in
Mounting Diameter, maximum 203.2 mm | 8 in
Mounting Diameter, minimum 63.5 mm | 2.5 in
Pipe Outer Diameter 60.96 mm | 2.4 in
SF-TP10-3-96
©2020 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks,respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for themost current information. Revised: April 27, 2020
Page of 2 19
Outline Drawing
Material SpecificationsMaterial Type Hot dip galvanized steel
Environmental SpecificationsEPA with 1/2 in (12 mm) radial ice 2.36 m² | 25.4 ft²
EPA without ice 1.812 m² | 19.5 ft²
Packaging and WeightsIncluded Antenna mounting pipes | Frame | Stiff arm
Packaging quantity 1
SF-TP10-3-96
©2020 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks,respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for themost current information. Revised: April 27, 2020
Page of 3 19
Weight, net 147.418 kg | 325 lb
Regulatory Compliance/CertificationsAgency Classification
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system
Included ProductsCO-400 — Crossover Plate, joins 2 in to 5 in OD to 4 in to 9 in OD round member
MT-537 — Plain End Pipe, 2-3/8 in OD x 126 in
MT-651-96 — Plain End Pipe, 2-3/8 in OD x 96 in
SA-B — Stiff Arm Mount Bracket for 2-3/8 in OD pipe
XA-1919 — Crossover Angle, 1.9 in to 1.9 in OD
XA-1920 — Crossover Angle, 1.9 in to 2.38 in OD
XA-2020 — Crossover Angle, 2-3/8 in to 2-3/8 in OD
XA-2030 — Crossover Angle, 2.38 in to 2.88 in OD
XA-2035 — Crossover Angle, 2.38 in to 3.5 in OD
XA-3030 — Crossover Angle, 2.88 in to 2.88 in OD
* FootnotesEPA with 1/2 in (12 mm) radial ice EPA—w Effective Projected Area
EPA without ice EPA—w Effective Projected Area
CO-400
©2020 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks,respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for themost current information. Revised: April 27, 2020
Page of 4 19
Crossover Plate, joins 2 in to 5 in OD to 4 in to 9 in ODround member
Product ClassificationProduct Type Clamp plate
General SpecificationsMounting Crossover plate
Tower Taper Non-tapered
DimensionsHeight 304.8 mm | 12 in
Width 304.8 mm | 12 in
Length 203.2 mm | 8 in
Mounting Diameter 2, maximum 228.6 mm | 9 in
Mounting Diameter 2, minimum 101.6 mm | 4 in
Mounting Diameter, maximum 127 mm | 5 in
Mounting Diameter, minimum 50.8 mm | 2 in
Material SpecificationsMaterial Type Hot dip galvanized steel
Packaging and WeightsIncluded Clamps | Plates
Packaging quantity 1
Weight, net 13.6 kg | 29.983 lb
Regulatory Compliance/CertificationsAgency Classification
CO-400
©2020 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks,respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for themost current information. Revised: April 27, 2020
Page of 5 19
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system
MT-537
©2020 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks,respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for themost current information. Revised: April 27, 2020
Page of 6 19
Plain End Pipe, 2-3/8 in OD x 126 in
Product ClassificationProduct Type Plain end pipe
General SpecificationsPipe, quantity 1
DimensionsHeight 60.96 mm | 2.4 in
Width 60.96 mm | 2.4 in
Length 3,200.4 mm | 126 in
Pipe Length 3,200.4 mm | 126 in
Pipe Outer Diameter 60.96 mm | 2.4 in
Material SpecificationsMaterial Type Hot dip galvanized steel
Packaging and WeightsIncluded Pipe
Packaging quantity 1
Weight, net 18 kg | 39.683 lb
Regulatory Compliance/CertificationsAgency Classification
CHINA-ROHS Below maximum concentration value
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system
REACH-SVHC Compliant as per SVHC revision on www.commscope.com/ProductCompliance
ROHS Compliant
MT-537
©2020 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks,respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for themost current information. Revised: April 27, 2020
Page of 7 19
MT-651-96
©2020 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks,respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for themost current information. Revised: April 27, 2020
Page of 8 19
Plain End Pipe, 2-3/8 in OD x 96 in
Product ClassificationProduct Type Plain end pipe
General SpecificationsPipe, quantity 1
DimensionsHeight 60.96 mm | 2.4 in
Width 60.96 mm | 2.4 in
Length 2,438.4 mm | 96 in
Pipe Length 2,438.4 mm | 96 in
Pipe Outer Diameter 60.96 mm | 2.4 in
Material SpecificationsMaterial Type Hot dip galvanized steel
Packaging and WeightsIncluded Pipe
Packaging quantity 1
Weight, net 15.2 kg | 33.51 lb
Regulatory Compliance/CertificationsAgency Classification
CHINA-ROHS Below maximum concentration value
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system
REACH-SVHC Compliant as per SVHC revision on www.commscope.com/ProductCompliance
ROHS Compliant
MT-651-96
©2020 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks,respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for themost current information. Revised: April 27, 2020
Page of 9 19
SA-B
©2020 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks,respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for themost current information. Revised: April 30, 2020
Page of 10 19
Stiff Arm Mount Bracket for 2-3/8 in OD pipe
Product ClassificationProduct Type Stiff arm mount
General SpecificationsMounting Round and angle legs
Pipe, quantity 0
DimensionsHeight 152.4 mm | 6 in
Width 203.2 mm | 8 in
Length 203.2 mm | 8 in
Pipe Outer Diameter 60.96 mm | 2.4 in
Material SpecificationsMaterial Type Hot dip galvanized steel
Packaging and WeightsIncluded Attachment hardware
Packaging quantity 1
Weight, net 6.078 kg | 13.4 lb
Regulatory Compliance/CertificationsAgency Classification
CHINA-ROHS Below maximum concentration value
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system
REACH-SVHC Compliant as per SVHC revision on www.commscope.com/ProductCompliance
ROHS Compliant
SA-B
©2020 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks,respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for themost current information. Revised: April 30, 2020
Page of 11 19
XA-1919
©2020 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks,respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for themost current information. Revised: April 27, 2020
Page of 12 19
Crossover Angle, 1.9 in to 1.9 in OD
Product ClassificationProduct Type Mounting kit
General SpecificationsTower Taper Non-tapered
DimensionsHeight 152.4 mm | 6 in
Width 152.4 mm | 6 in
Length 152.4 mm | 6 in
Mounting Diameter, maximum 48.26 mm | 1.9 in
Mounting Diameter, minimum 48.26 mm | 1.9 in
Material SpecificationsMaterial Type Hot dip galvanized steel
Packaging and WeightsIncluded Angle | U-bolts
Packaging quantity 2
Weight, net 1.8 kg | 3.968 lb
Regulatory Compliance/CertificationsAgency Classification
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system
XA-1920
©2020 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks,respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for themost current information. Revised: April 27, 2020
Page of 13 19
Crossover Angle, 1.9 in to 2.38 in OD
Product ClassificationProduct Type Mounting kit
General SpecificationsTower Taper Non-tapered
DimensionsHeight 152.4 mm | 6 in
Width 152.4 mm | 6 in
Length 152.4 mm | 6 in
Mounting Diameter, maximum 60.96 mm | 2.4 in
Mounting Diameter, minimum 48.26 mm | 1.9 in
Material SpecificationsMaterial Type Hot dip galvanized steel
Packaging and WeightsIncluded Angle | U-bolts
Packaging quantity 2
Weight, net 1.8 kg | 3.968 lb
Regulatory Compliance/CertificationsAgency Classification
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system
XA-2020
©2020 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks,respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for themost current information. Revised: April 27, 2020
Page of 14 19
Crossover Angle, 2-3/8 in to 2-3/8 in OD
Product ClassificationProduct Type Mounting kit
General SpecificationsMounting Pipe, 60.3 mm (2-3/8 in ) OD
Tower Taper Non-tapered
DimensionsHeight 152.4 mm | 6 in
Width 152.4 mm | 6 in
Length 152.4 mm | 6 in
Mounting Diameter, maximum 60.96 mm | 2.4 in
Mounting Diameter, minimum 60.96 mm | 2.4 in
Material SpecificationsMaterial Type Hot dip galvanized steel
Packaging and WeightsIncluded Angle | U-bolts
Packaging quantity 2
Weight, net 1.8 kg | 3.968 lb
Regulatory Compliance/CertificationsAgency Classification
CHINA-ROHS Below maximum concentration value
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system
REACH-SVHC Compliant as per SVHC revision on www.commscope.com/ProductCompliance
XA-2020
©2020 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks,respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for themost current information. Revised: April 27, 2020
Page of 15 19
ROHS Compliant
XA-2030
©2020 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks,respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for themost current information. Revised: April 27, 2020
Page of 16 19
Crossover Angle, 2.38 in to 2.88 in OD
Product ClassificationProduct Type Mounting kit
General SpecificationsTower Taper Non-tapered
DimensionsHeight 152.4 mm | 6 in
Width 152.4 mm | 6 in
Length 152.4 mm | 6 in
Mounting Diameter, maximum 73.66 mm | 2.9 in
Mounting Diameter, minimum 60.96 mm | 2.4 in
Material SpecificationsMaterial Type Hot dip galvanized steel
Packaging and WeightsIncluded Angle | U-bolts
Packaging quantity 2
Weight, net 1.8 kg | 3.968 lb
Regulatory Compliance/CertificationsAgency Classification
CHINA-ROHS Below maximum concentration value
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system
REACH-SVHC Compliant as per SVHC revision on www.commscope.com/ProductCompliance
ROHS Compliant
XA-2030
©2020 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks,respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for themost current information. Revised: April 27, 2020
Page of 17 19
XA-2035
©2020 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks,respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for themost current information. Revised: April 27, 2020
Page of 18 19
Crossover Angle, 2.38 in to 3.5 in OD
Product ClassificationProduct Type Mounting kit
General SpecificationsTower Taper Non-tapered
DimensionsHeight 152.4 mm | 6 in
Width 152.4 mm | 6 in
Length 152.4 mm | 6 in
Mounting Diameter, maximum 88.9 mm | 3.5 in
Mounting Diameter, minimum 60.96 mm | 2.4 in
Material SpecificationsMaterial Type Hot dip galvanized steel
Packaging and WeightsIncluded Angle | U-bolts
Packaging quantity 2
Weight, net 1.8 kg | 3.968 lb
Regulatory Compliance/CertificationsAgency Classification
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system
XA-3030
©2020 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks,respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for themost current information. Revised: April 27, 2020
Page of 19 19
Crossover Angle, 2.88 in to 2.88 in OD
Product ClassificationProduct Type Mounting kit
General SpecificationsTower Taper Non-tapered
DimensionsHeight 152.4 mm | 6 in
Width 152.4 mm | 6 in
Length 152.4 mm | 6 in
Mounting Diameter, maximum 73.66 mm | 2.9 in
Mounting Diameter, minimum 73.66 mm | 2.9 in
Material SpecificationsMaterial Type Hot dip galvanized steel
Packaging and WeightsIncluded Angle | U-bolts
Packaging quantity 2
Weight, net 1.8 kg | 3.968 lb
Regulatory Compliance/CertificationsAgency Classification
ISO 9001:2015 Designed, manufactured and/or distributed under this quality management system