SMART KITCHEN SYSTEMS MADE EASY
SHAWS BUTLER SINKS PRODUCT OVERVIEW
OCTOBER 2017
SMART KITCHEN SYSTEMS MADE EASY4
SINKS - BUTLER SINKS
TRADITIONAL CRAFTMANSHIP FOR OVER 100 YEARSShaws sinks demonstrate the natural characteristics of fire clay ceramics and are created by a ‘slip casting’ process at the Shaws factory in the Lancashire town of Darwen. A mixture of clay and water is poured by hand into a porous mould. When the newly formed sinks are dry enough, craftsmen remove them from their moulds before hand finishing t he s inks t hrough a process of sponging and ‘fettling’ to create a smooth finish.
Following a drying period of up to 40 hours, the sinks are then prepared with a ground coat before being glazed. Firing in specially designed kilns at temperatures of up to 1200 degrees centigrade completes this rigorous process.
Whilst modern technology has improved manufacturing conditions over the years, the principals of this hand crafted product remain the same. Each sink is proudly signed with the impression of its maker and bears its own distinctive badge. Traditional craftsmanship is as important now as it was in 1897.
Please note: We endeavour to keep all butler sinks in stock however due to the slow manufacturing process with all sinks being hand-made we may experience delays in supply so please check stock availability before ordering.
BELFAST SINKS, LONDON SINKS OR BUTLER SINKS?Fireclay kitchen sinks were traditionally either Belfast sinks or London (butler) sinks. The main distinguishing difference between the two is the weir overflow, which was absent from the London butler sink to discourage water wastage. Water in London was not so plentiful as it was in Belfast! Several examples of each style are produced by Shaws.
PHONE: 0508 365 674 EMAIL: [email protected] FAX: 0508 365 632 ADDRESS: 96 Stoddard Rd, Mount Roskill, Auckland 1041 www.enko.nz
5
CLASSIC DOUBLE BUTLER SINKAvailable in two sizes - 800mm & 1000mm
795/995W x 465D x 229H* (mm)
Requires either Type A basket strainer waste or waste disposal system
Item No: KTSCD800 Item No: KTSCD1000
SINKS - BUTLER SINKS
*Due to Shaw’s fireclay ceramics being beautifully handcrafted all sink sizes are ± 2% variance from specified dimensions. We recommendyour kitchen manufacturer is aware of this and that no benchtops or cabinets are cut until your sink is on site.
CLASSIC BUTLER SINKAvailable in two sizes - 600mm & 800mm
595/795W x 460D x 255H* (mm)
Requires either Type A basket strainer waste or waste disposal system
Item No: KTSCB600 Item No: KTSCB800
CLASSIC 600 BUTLER SINK
SMART KITCHEN SYSTEMS MADE EASY6
SINKS - BUTLER SINKS
*Due to Shaw’s fireclay ceramics being beautifully handcrafted all sink sizes are ± 2% variance from specified dimensions. We recommendyour kitchen manufacturer is aware of this and that no benchtops or cabinets are cut until your sink is on site.
ENTWISTLE BUTLER SINK760W x 460D x 255H* (mm)
Requires either Type A basket strainer waste or waste disposal system
Item No: KTSE760
ENTWISTLE BUTLER SINK
PHONE: 0508 365 674 EMAIL: [email protected] FAX: 0508 365 632 ADDRESS: 96 Stoddard Rd, Mount Roskill, Auckland 1041 www.enko.nz
7
SINKS - BUTLER SINKS
*Due to Shaw’s fireclay ceramics being beautifully handcrafted all sink sizes are ± 2% variance from specified dimensions. We recommendyour kitchen manufacturer is aware of this and that no benchtops or cabinets are cut until your sink is on site.
BOWLAND BUTLER SINK595W x 465D x 220H* (mm)
Requires either Type A basket strainer waste or waste disposal system
Item No: KTSB600
RIBCHESTER DOUBLE BUTLER SINKAvailable in two sizes - 800mm & 1000mm
795/995W x 465D x 228H* (mm)
Requires either Type A basket strainer waste or waste disposal system
Item No: KTSR800 Item No: KTSR1000
RIBCHESTER 1000 DOUBLE BUTLER SINK
SMART KITCHEN SYSTEMS MADE EASY8
SINKS - INSETS, UNDERMOUNTS
*Due to Shaw’s fireclay ceramics being beautifully handcrafted all sink sizes are ± 2% variance from specified dimensions. We recommendyour kitchen manufacturer is aware of this and that no benchtops or cabinets are cut until your sink is on site.
CLASSIC SQUARE SINK460W x 460D x 191H* (mm)
Mounting options: inset or undermount
Requires either Type A basket strainer waste or waste disposal system
Item No: KTSCS460
CLASSIC INSET SINK595W x 460D x 255H* (mm)
Mounting options: inset or undermount
Requires either Type A basket strainer waste or waste disposal system
Item No: KTSCI600
CLASSIC INSET SINK
PHONE: 0508 365 674 EMAIL: [email protected] FAX: 0508 365 632 ADDRESS: 96 Stoddard Rd, Mount Roskill, Auckland 1041 www.enko.nz
9
SINKS - ACCESSORIES
*Due to Shaw’s fireclay ceramics being beautifully handcrafted all sink sizes are ± 2% variance from specified dimensions. We recommendyour kitchen manufacturer is aware of this and that no benchtops or cabinets are cut until your sink is on site.
TYPE A BASKET STRAINER WASTESAvailable in Chrome (CR) and Brushed Nickel (NS)
Note: Brushed Nickel finish matches Pewter, Brushed Nickel and Inox tapware finishes
Item No: KTTYPEACR Item No: KTTYPEANS
SHAWS RUBBER SINK MAT320 x 400
Protects glasses/china
Protects sink from heavy impact
Item No: KTSHRM