Date post: | 27-May-2015 |
Category: |
Design |
Upload: | sheldon-roberts |
View: | 150 times |
Download: | 4 times |
Sheldon Roberts Design Projects
Sheldon Roberts, P.E.
1918 Wallinford Circle
Sun Prairie, WI 53590
Home: 608-834-8060
Cell: 608-843-0452
Medical Projects
Spacelabs Healthcare Akron Anesthesia Machine
� Acting as lead mechanical engineer coordinating efforts of worldwide design team while responsible for individual components and subsystems.
� Mechanically architected complete system. Maintaining system wide mechanical documentation as well as reviewing components and subsystems for manufacturability, assembly, safety and regulatory compliance as company wide Safety Engineer
Hill Rom Total Care Bed
� Led and participated in design effort of side rails, side rail mounting, and controls conforming to all UL and international standards
� FEA analysis of mounting to bed
Kerr Dental Demi Hand Held Curing Light and Charging Base
� Designed charging base while giving
design aid for hand
held curing light
� Performed drop test
simulation on curing wand and battery pack
Hollister Breast Pump
� Designed housings, pump, and control
interface for a
redesigned breast pump
� Analyzed current system design
problems to increase reliability and reduce
cost
Hospira Symbiq Infusion System
� Designed various components of new
infusion system
Phillips Sonicare Toothbrush
� Redesigned
existing product for
improved
manufacturability,
ergonomics and
reliability
Ikaria INOMAX Vasodialator System
� Designed various internal and
external components of Nitric
Oxide inhalation system for
treatment of term and near
term neonates with hypoxic
respiratory failure
Consumer Projects
Tension Labs Digital Earphone Amplifier
� Designed housings and electronic packaging for
the digital earphone
amplifier
Wilson Sporting Goods Adjustable Batting
Helmet and Shock Absorbing Catcher’s Mask
� Designed adjustable head size strap system
for batting helmet
� Computer simulation of
shock absorbing
system for catcher’s mask
Fiskars School and Crafting Products
� Designed line of school products including
protractor, pencil
sharpener, pencil box and rulers
� Designed paper trimmer line and
crafting shape punching line
Sunbeam Oster Blender Family
� Led design effort for new line of blenders
� New components included housings,
motors, control panels,
lids while keeping backward compatibility
of existing product line
SC Johnson Room Purifier
� Involved in research, lay out and design and
CADR testing of Oust
room air purifier
SC Johnson Sense & Spray Automatic Spray
� Mechanical design of housings, drive train,
and electronic
packaging of new air fragrancer
Suncast Automated Hose Reel System
� Led design effort of new automated hose
reel.
� Designed drive
mechanism and aided
in FEA analysis of pressure line drops to
simulate performance of system
Suncast Cat Litter Box and Storage
� Designed cat litter box, 2 storage containers
and rake
Commercial / Industrial/Laboratory Projects
Uline Under Cabinet Refrigerator Organizer
� FEA analysis of door hinge
� Involved in ideation of new food organizing
system in luxury under
cabinet refrigerator
Spacesaver Library Shelving Units and Safety System
� Involved in aesthetic face and handle design
for storage system
� Mechanical design of
safety system to
prevent actuation of movable stacks if lanes
were occupied
BP Castrol Cutting Fluid Monitoring System
� Researched, laid out and designed
components of
automated system that monitored impurities in
industrial cutting fluid
Berkel Meat Slicer
� Led design effort of new meat slicer
� Designed translational drive, meat holding
table, sharpener, blade
mounting and blade motor mount system
Buell Blast Motorcycle Components
� Designed various components of new
Buell Blast single
cylinder motorcycle
� Components included
wheels, cylinder head, fuel tank, fairings and
chain tensioners among others
Herman Miller Line of Furniture
� Designed adjustable height system for line of office furniture
� 3 versions of interchangeable drives designed to lift up to 300 pounds on table top
� FEA analysis of complete system
Electronic Theater Controls Automated Shutter System
� Designed automated shutter system for ETC’s Revolution automated lighting system
� Repeatability, reliability and low sound levels inherent in design of 4 sliding shutters 1” in front of 750 watt bulb
Prince Castle Restaurant Toaster Oven
� Designed new toaster oven for Prince Castle’s customer based on existing components of single cavity model
� Simplified design of components and electronic packaging for manufacturing and assembly
� Thermal testing of completed unit
Beecher Tissue Microarrayer
� Mechanical layout and design of housings,
linear stages, electronic
packaging, and tissue sampler
Georgia Pacific Fountain Drink Sealing System
� Designed, prototyped and tested various
components of
automated soft drink sealing system such as
media feed and external housings
Miniaturized Chromatography System
� Laid out and designed mechanical components for benchtop liquid chromatography system
� Prototyped, assembled and tested components and system for performance