SHINNFU 2016 CAT - Tool Centre · 2018. 10. 3. · • Two (2) years limited warranty for...

WORKSHOP CATALOGUEEngineered to last

SHINN FU EUROPE B.V.www.shinnfu.comOfficial Sponsors of United Autosports

2

WARRANTY CONDITIONS For OMEGA and PRO LIFT BRAND LIFT EQUIPMENTAll Shinn Fu products are carefully supervised throughout the manufacturing process. Before sending the products to the customers, every article is checked for material and manufacturing defects. The high quality and reliability of our products is what characterizes our brands.

Shinn Fu’s products are warranted against defects in material and workmanship for a period of two (2) years for both OMEGA and PRO LIFT (from the date of purchase).

Warranty terms:The warranty applies to all Shinn Fu’s products under regular conditions of use. In case the product is found to be defective by Shinn Fu (in its sole judgment); Shinn Fu will repair, replace or credit (at its option) the product without charge.

Warranty assessment: In case of defective articles the customers have to contact a Shinn Fu Europe B.V. dealer for further instructions.

WARRANTY CONDITIONS For OMEGA-MECHANIX brand productsShinn Fu’s products are warranted (for the expected life of the products) against defects in material and workmanship.

Warranty terms:The warranty applies to all Shinn Fu’s products under regular conditions of use. In case the product is found to be defective by Shinn Fu (in its sole judgment); Shinn Fu will repair or replace (at its option) the product without charge.

Disclaimers and Limitations:This LIMITED WARRANTY does not extend to products manufactured by SHINN FU that in its sole judgment were improperly used, altered, abused or repaired by others.

• Ten (10) years limited warranty for OMEGA-MECHANIX hand tools with exception of shank bits, bit sockets, ratchet handles, torque-sockets, torque-wrenches, air impact wrench and electrical impact wrench.

• Two (2) years limited warranty for OMEGA-MECHANIX ratchet handles, torque-sockets, torque-wrenches and air impact wrenches.

• One (1) year limited warranty on all OMEGA-MECHANIX products that are equipped with a battery or 230V power lead.• No warranty on shank bits and socket bits, or wear items like creeper wheels.

Shinn Fu is not liable for incidental or consequential costs or losses incurred by product purchaser or user.

Warranty Assessment: In case of defective articles the customers have to contact their Shinn Fu Europe B.V. dealer for further instructions.The product price is in consideration of limiting Shinn Fu’s liability for products manufactured or distributed.

WARNING!Familiarize yourself carefully with these products before using. Know the hazards associated with their improper use. Never use

3

SHINN FU Under the direction and leadership of the founder Mr. Michael Hung, and the hard work and devotion of their employees,

Shinn Fu Corporation was founded by Mr. Michael Hung in 1971 (based Chia-yi, Taiwan). Shinn Fu’s vision is one of continuous growth and prosperity. Their goal is to generate strong growth and new levels of achievement, and to continue to make the

The insistence of producing and offering only the highest quality products has earned Shinn Fu Group a reputation for exceptional quality in the automotive lifting equipment, hydraulic equipment, and automotive accessories with strong brands in the professional market and invaluable recognition for reliability in the DIY market. The quality of Shinn Fu's products is recognized not only by customers worldwide, but also by international governments and industry agencies including the American National Standards Institute (ANSI), Australian Standards (AS), European Conformity (CE), Germany's Technical Inspection Association (TUV) and Japanese Industrial Standards (JIS). Every Shinn Fu product is

Shinn Fu’s commitment to quality permeates all aspects of the organization, and it is aggressively assimilating the International Quality Assurance System into its production fold. Currently Shinn Fu has three plants that are ISO9001, ISO14000 and QS9000 compliant, and a mechanical jack manufacturing plant that conforms to rigorous automotive industry Quality Assurance (QA) standards. All other facilities in the Shinn Fu Group have initiated programs to reach compliance in the near future in order to pro-gress toward Shinn Fu's goal of total quality system compliance. Shinn Fu is committed to continuous upgrades all of its facilities to ensure that they remain state-of-the-art.

Shinn Fu possesses a valuable, substantial and global patent portfolio that covers many important inventions in hydraulics, lifting, and automotive accessories. Shinn Fu is also devoted to supplying safe user-friendly product lines.

USA, Canada, Australia, Hong Kong, Japan and Europe. This global presence facilitates the establishment of strong customer relationships and allows Shinn Fu to provide more effective customer assistance. Shinn Fu Europe BV (SFE) was established in 1994 in The Netherlands. With the objective of promoting and distributing Shinn Fu's products in the markets of Europe, Middle East and Northern Africa, SFE launched the Omega Lifting Equipment program beginning in 1994. Since then, Omega has won the market's recognition.SFE maintains the following divisions:

• BVA Hydraulics™• Omega Lift Equipment®• Omega Mechanix™• Pro-Lift®

Pro

fess

iona

l lift

ing

equi

pmen

t

5

Index

Hydraulic bottle jacks Page 8

Specifications Page 9

Hydraulic service jacks Page 10 - 12

High lift Page 13

Specifications Page 14 - 15

Hydraulic service jacks Page 16 - 17


Air actuated axle jacks Page 19 - 23

Specifications Page 24 - 25

Stabilisation Products Page 26 - 27

Jack stands Page 28

Axle stands & high stands Page 29

Specifications stands Page 30

Hydraulic pit jack Page 31

Transmission jacks Page 32 - 33


Body repair kits Page 34

Engine cranes Page 35 - 36


Engine stands & supports + specs. Page 38 - 39

Presses + specs. Page 40 - 41

Bench & shop presses + specs. Page 42 - 43

Wheel arm & pipe bender Page 44

Car dolly + Tyre handling equipment Page 45 - 47

Pumps & cylinders + specs. Page 48 - 49

6

Handle

Round-Shape handle

Magic Lift

• Magic Lift for fast and time-saving operation.• Reaches the lifting point with only one stroke.

Handle

T-Shape handle

Handle

With Air Return

Handle

With Air Return

Handle

7

5. Gear Type

Traditional and proven transmission.

2. Saddle pad

Patented airvented soft saddle pad prevents vehicles chassis against scratching.

3.3. Full cover Saddle pad

Patented airvented soft saddle pad prevents vehicles chassis against scratching.

1. Soft Handle Foam

Soft Foam for extra protection. Prevents handle from accidentally damaging the car.

9. Metal Wheels

Metal wheels, long lasting and strong.

6. Air Vent Valve or Oil Filler Plug

Exclusive designed breather plug automati-cally eliminates air in the hydraulic system, optimizing jack's performance.

4. Universal Joint Mechanism

Universal joint release mechanism provides precision control of load descent in any handle position.

Air Vent Valve or Oil Filler Plug

SoftHandle Foam

GearType

MetalWheels

NylonWheels

PU-Wheels

Universal Joint

8. Nylon Wheels

Nylon wheels for easy and silent moving

7. PU-Wheels

PU-Wheels for easy and silent moving

General Features

1. 2. 3. 4. 5. 6. 7. 8. 9.

8

Hydraulic bottle jacks >Model: 1102500 - 1104500 - 1106500 - 1108500 - 1112500 - 1112900

1120500 - 1120900 - 10500 - 10990

• With easy adjustable extension screw [2-20 Ton].• With rubber removable carry ring for easy storage of pump handle [2-20 Ton].• Safety valve against over-loading.• Bottle Jacks 8 Ton and more are supplied with a carry grip.

< Air actuated bottle jacksModel: 1820200 - 1730200 - 1820600 - 1850200

• 8 - 12 BAR suggested air pressure for optimal performance.

Telescopic bottle jacks >Model: 1202100 - 1204100

• Telescopic ram plunger combines a compact construction with a long hydraulic stroke.

Hydraulic bottle jacksHeavy duty

< Hydraulic welded bottle jacksModel: 1412000 - 1420000 - 1430000

• With easy adjustable extension screw.• Safety valve against over-loading.• Bottle Jacks are supplied with a carry grip.

9

D

C

A

B

E

W

FL

D

C2

C1C

B

A

E

W

LF

1412000 1420000 1430000 1202100 1204100 1820200 1820600 1730200 185020012 ton 20 ton 30 ton 2 ton 4 ton 20 ton 20 ton 30 ton 50 ton

ModelCapacity

A (mm)B (mm)C (mm)

C1 (mm)C2 (mm)D (mm)E (mm)F (mm)L (mm)

W (mm)N.W. (kg)G.W. (kg)

Pieces CartonCBM/CTN

Pcs/20ft Cont.

241469150

--

7845242

1381068

8.254

0.0272000

249475150

--

7645276

16015012.5132

0.0181200

268480155

--

5769567

19015220

20.81

0.014800

170375205103102

-34528110122

4246

0.0314554

17341820110410635

44532

1301205.4

23.14

0.0242980

247477130

--

10060048

21618417.017.9

10.0171005

24547880--

15360052

23017317.618.4

10.017976

280458180

---

9656226021027.528.5

10.031632

305483178

---

60079

28018758.463.3

10.0395

284

- Telescopic

1102500 1104500 1106500 1108500 1112500 1112900 1120500 1120900 10500 10990

2 ton 4 ton 6 ton 8 ton 12 ton 12 ton 20 ton 20 ton 50 ton 100 tonModel

Capacity

A (mm)B (mm)C (mm)D (mm)E (mm)F (mm)L (mm)



Pcs/20ft Cont.

1843491105534025100983.012.8

40.0135600

20839312560

44827

1091004.0

17.34

0.0193900

22143413380

448311181055.0

21.94

0.0193300

23145115070

46034

1201226.2

24.94

0.0252900

24047015080

46043

1401308.0

33.54

0.0292100

1572747740

46043

1641546.3

26.04

0.0292668

24447415080

46052

13813012.526.1

20.0201300

1692867740

46052

1641509.6

20.52

0.0141766

305483178

-59379

27519850.454.9

10.034328

305461156

-60011330523890.697.2

10.044185

Heavy duty

- Air Actuated

Specifications

Heavy duty - Welded

10

2902401 >

Capacity: 2.25 TonMax: 495mmMin: 135mm

Extra wide wheels and solid stance designed for stability under load stress.

Hydraulic Service JacksGear Type & Universal joint

SoftHandle Foam

GearType

PU-Wheels

PU-Wheels

SoftHandle Foam

SoftHandle Foam

GearType

GearType

PU-Wheels


31,5KG

SoftHandle Foam

Universal Joint


PU-Wheels

< 2103001

Capacity: 3 TonMax: 494mmMin: 140mm

Equipped with traditional handle and convenient foot pedal.

2903501 >


Extra wide wheels and solid stance designed for stability under load stress.

< 2903101


Universal joint mechanism.

11

Hydraulic Service JacksUniversal joint

2903011 >



< 2903701



SoftHandle Foam

2702701 >


Aluminum frame with steel lifting arm.

SoftHandle Foam

PU-Wheels

SoftHandle Foam

Universal Joint


PU-Wheels

SoftHandle Foam

Universal Joint


PU-Wheels

PU-Wheels

Universal Joint

Universal Joint

26KG

31KG

< 2602701


Full aluminum jack.

12

Hydraulic service jacksLow profile universal joint

2902301 >Only 63mm high / Extra long reach


2902501 >High lifting range 63 - 500mm


SoftHandle Foam

SoftHandle Foam

Universal Joint

Universal Joint

PU-Wheels

PU-Wheels

PU-Wheels




2102701 >Long reach


SoftHandle Foam

Universal Joint

Length 600mm

Length 710mm

2903201 >High lifting range 85 - 500mm


SoftHandle Foam

Universal Joint

PU-Wheels


13

< 28045Forklift jack



• Dual lift points for servicing forklift trucks, vehicles or machinery with low or high ground clearance.

High liftUniversal joint

2501503 >T-Shape handle

Capacity: 1,5 TonMax: 815mmMin: 100mm

SoftHandle Foam

Universal Joint

NylonWheels


Optional 32075

Capacity: 7 Ton

4 Ton

5 Ton

T-Shape Handle

14

2902401 2602701 2702701 2103001 2903101 2903501 2903701

2 ton 2.7 ton 2.7 ton 3 ton 3 ton 3.2 ton 3.2 tonModel

Capacity

A (mm)B (mm)

Stroke C (mm)E (mm)F (mm)I (mm)J (mm)L (mm)

W (mm)H (mm)

N.W. (kg)G.W. (kg)


Pcs/20ft Cont.

Soft Saddle-Pad

Universal Joint

Air vent valve or

Wheels

135495360

10701007643

63633516531,533.0

10.043620

x

-

-

PU

103485382

12101006555

73033216026

2711

0.056500

x

-

-

PU

100480380

12101006555

70533216031

32,61

0.053500

x

-

-

PU

140494354

10701259258

69734116037.639.0

10.064440

x

-

x

PU

120460

-11501107643

67833416132.334.3

10.043500

x

x

x

PU

145504359

10701257658

69033616037.238.5

10.062445

x

-

x

PU

1405584181320125924375835116539.842.8

10.066420

x

x

x

PU

Hydraulic service jacks


MetalWheels

Universal Joint

A

F

I J

H

W

L

BC E

Specifications

15

2903011 2102701 2902301 2902501 2903201 2501503 28045

3.5 ton 2 ton 2 ton 2.25 ton 3 ton 1.5 Ton 4 Ton

100533433

1320110854073834416138.9411

0.059480

x

x

x

PU

80375295

13201257258

95534917044.348.5

10.094306

x

x

x

PU

63508445

13201256058

107834917552.554.9

10.107270

x

x

x

PU

63500437

13201256043

76234514539.541.5

10.064456

x

x

x

PU

85500415

13201107240

69234415838391

0.057500

x

x

x

PU

100815 715

13421409258

102938517052

56.51

0.090286

x

x

x

Nylon

55435430765750751005075525538.541.3

10.070348

-

-

-

Metal

Low profileservice jacks High lift Forklift

E

B

D

W

C

I

G

A

4 Ton▼

5 Ton▼

5 Ton▼

4 Ton▼

J

L

Specifications

16

Hydraulic service jacksLong chassis

2505700 >


Universal Joint


Round-Shape Handle

< 2510700


Universal Joint


Round-Shape Handle

MetalWheels

MetalWheels

17

Hydraulic service jacksLong chassis - air operated

22201 >


• 8-14 BAR suggested air pressure for optimal performance.• 3-Ways to operate: by air, manually and with

foot pedal.

Universal Joint

MetalWheels


22101C >


Universal Joint

MetalWheels


T-Shape Handle

18

2505700 2510700 22201 22101C

5 ton 10 ton 20 ton 10 tonModel

Capacity

A (mm)B (mm)

Stroke (mm)E (mm)F (mm)I (mm)J (mm)L (mm)

W (mm)H (mm)

N.W. (kg)G.W. (kg)


Pcs/20ft Cont.

Soft Saddle-Pad

Universal Joint

Air vent valve or

Wheels

165565400

106816711070

133842828185.591.5

10.144200

x

x

x

Metal

175686511

1215167130100

1309499245

130.0140.0

10.253

90

x

x

x

Metal

178686508

1069188150100

1390507324163

200.01

0.36860

x

x

x

Metal

190660470

1346155150100

1580517300220

259.11

0.46150

x

x

x

Metal

Hydraulic Service Jacks


MetalWheels

Universal Joint

A

F

I J

H

W

L

BC E

Specifications

19

Adaptors

75mm 45mm

Air actuated axle jacks• • Easy access between wheels of tandem axle trucks.• 8-12 BAR suggested air pressure for optimal

performance.• Extension adaptors included.

Air actuated axle jacksTelescopic - Air Return

24KG

23152 >

Capacity: 15 / 30 Ton Max with adaptor: 409mmMax without adaptor: 289mmMin: 150mm

20

Adaptors

120mm 75mm 45mm 30mm

Air actuated axle jacksTelescopic - Air return

23212 >2 stage

Capacity: 20 / 40 TonMax with adaptor: 559mmMax without adaptor: 289mmMin: 150mm

With air return handle

21

Adaptors


Adaptors


Air actuated axle jacksTelescopic - Air return

< 242133 stage

Capacity: 20 / 40 / 60 TonMax with adaptor: 597mmMax without adaptor: 327mmMin: 150mm


24113 >

Capacity: 10 / 20 / 40 TonMax with adaptor: 559mmMax without adaptor: 289mmMin: 130mm


22

Adaptors

10mm 70mm 120mm

Adaptors

20mm 50mm 100mm

Air actuated axle jacksShort chassis

with air return

With extension

screw

With extension

screw

< 23211

Capacity: 20 TonMax with adaptor: 541mmMax without adaptor: 441mmMin: 215mm

23207 Telescopic >

Capacity: 20 / 35 TonMax with adaptor: 454mmMax without adaptor: 334mmMin: 186mm

23205 >

Capacity: 20 TonMax with adaptor: 495mmMax without adaptor: 395mmMin: 260mm

With extension screw (see dimension D in table)

23

Adaptors

45mm 100mm

100mm 200mm

Air actuated axle jacksHigh tonnage

< High tonnage - Short chassisModel: 23301C - 23501 - 23991Capacity: 30 ton - 50 ton - 100 ton

•

tandem axle vehicle.• User friendly, self-returning spring minimizes

operator's effort, greatly reducing fatigue.•

air motor for longer life.• 8-14 BAR suggested air pressure for optimal

performance.

< Air actuated axle jacksModel: 24301 - 24601

24301Capacity: 30 TonMax with adaptor: 772mmMax without adaptor: 627mmMin: 360mm

24601Capacity: 60 TonMax with adaptor: 1031mmMax without adaptor: 731mmMin: 420mm

24

23152 23212 24213 24113 24301/24601

15/30 ton 20/40 ton 20/40/60 ton 10/20/40 ton 30 / 60 tonModel

Capacity

A (mm)B (mm)

Stroke C (mm)C1 (mm)C2 (mm)C3 (mm)D (mm)E (mm)F (mm)L (mm)

W (mm)H (mm)

Adaptor 1 (mm)Adaptor 2 (mm)Adaptor 3 (mm)Adaptor 4 (mm)

N.W. (kg)G.W. (kg)


Pcs/20ft Cont.

1502891397366-

17670654902905007545--

24301

0.065420

1502891397366N/A18670

160480290143012075453047511

0.11254

15032717757596121570150875295

151012075453076811

0.17175

130289159574953

17970

125830295151012075453050561

0.17175

360 / 420627 / 731267 / 311

---

215 / 29570 / 90

200 / 200840 / 910282 / 362

1380 / 1380100 / 20045 / 100

--

87 / 126101 / 143

1 / 10.139 / 0.18

145 / 118

Telescopic - air return

H

F

A

C

L

B

E

WD

C1

C2C3

Specifications

25

23205 23211 23207 23301C 23501 23991

20 Ton 20 Ton 20/35 Ton 30 Ton 50 Ton 100 TonModel

Capacity

A (mm)B (mm)

A-B (mm) Stroke C (mm)

D (mm)E (mm)F (mm)L (mm)

W (mm)H (mm)

Adaptor 1 (mm)Adaptor 2 (mm)Adaptor 3 (mm)Adaptor 4 (mm)

N.W. (kg)G.W. (kg)


Pcs/20ft Cont.

26049523513510071

200547315

1229----

33.435.4

10.091290

2154412261418543

165525265

12401005020-

30351

0.083320

186334148148

-70

204549351

12291207010-

49.553.2

10.083325

280458

-178

-62

200547317

1229----

43.545.6

10.081255

305483

-178

-79

204549351

1229----

72.383.0

10.119216

305461

-156

-1132545864161258

----

112.5123.3

10.139145

Short Chassis High Tonnage - Short Chassis

B

A

L

C

D

E

F

W

H

Specifications

26

SB001B SB001Y SB002B SB002Y

35 ton

50 ton

35 ton

50 ton

100 ton

150 ton

100 ton

150 ton

ModelCapacity

ColorDimension (mm)

Weight (kg)

Black457(A) x 90(B) 105(C) x 80(D)

3.2

Yellow457(A) x 90(B) 105(C) x 80(D)

3.2

Black610(A) x 152(B) 178(C) x 150(D)

11.3

Yellow610(A) x 152(B) 178(C) x 150(D)

11.3

Stabilisation Blocks

1105

4345

7585

10825

1175

4625

71075

101525

LayerHeight (mm)

SW001B SW002BModel

ColorDimension (mm)

Weight (kg)

Black490 x 90 x 90

1.8

Black610 x 130 x 145

5.5

Wedge for SB001 or SB002

< SB001B & SB001YStabilisation block

• The stabilisation blocks are designed to provide superior crib stability compared to standard products.

• Unlike wooden products, the stabilisation blocks do not splinter or

• Lightweight and easy to handle, with anti-slip layers.• Instead of snapping, cracking or collapsing it gradually deforms providing

a visual warning of overload.

Stabilisation blocks

In this photo, we see SB002B blocks set up for a 2 stage crib application. Stabilisation blocks are designed according to a system of interlocking blocks. In this photo, we see SB002B blocks set up for a 3 stage crib application.

Interlocking

Cribbing Options

Height of the stability tower is limited to

2 Stage 3 Stage

27

Support pads

SP44410 SP55415 SP66420 SP66625 SP1010650

10 ton 15 ton 20 ton 25 ton 50 tonModel

Capacity

GripDimension (mm)

Weight (kg)

1400 x 400 x 40

6

1500 x 500 x 40

9

1600 x 600 x 40

14

1600 x 600 x 60

20

21000 x 1000 x 60

58

Support Pads

Other sizes/capacities available on request.

SP44410 >Support pad

• The support pads are outrigger pads used for mobile cranes, truck mounted cranes, aerial working platforms, concrete pumps, containers, hydraulic jacks etc.

• Its purpose is to spread the weight over a larger surface offering better support while also protecting the surface.

Support Pads >

• Ecological.• Light weight.• Easy to handle.• High durability.•• Water-repellent.• Nearly unbreakable.• No rusting. • No rotting.

28

Jack standsTubing & Ratchet

< Jack stands ratchetModel: 3203500 | 3 Ton | Max 432mm / Min 292mm 3206500 | 6 Ton | Max 618mm / Min 390mm 3212500 | 12 Ton | Max 700mm / Min 445mm

• One piece, FCD-40 ductile iron ratchet bar provides super strength and durability.

• Quick adjustment ratchet mechanism.

Sold and to be used only in pairs!

Jack stands tubing >Model: 3203100 | 3 Ton | Max 433mm / Min 290mm 3206100 | 6 Ton | Max 565mm / Min 365mm 3212100 | 12 Ton | Max 750mm / Min 485mm 3220100 | 20 Ton | Max 923mm / Min 568mm

• Adjustable in various heights.• Chained lock pin to secure ratchet column.


3 & 6 Ton with rubber pad

29

Axle stands & High standsHeavy Duty

3207500 >Capacity: 7 Ton | Max 360mm / Min 238.5mm

• Special for forklift trucks.


< 3222500Capacity: 22 Ton | Max 505mm / Min 310mm


< 3210901Capacity: 10 Ton | Max 1194mm / Min 711mm


3203900 >Capacity: 3 Ton | Max 2000mm / Min 1300mm

Sold per piece!

with rubber pad

30

L

JIB

D C

A W

I

B

INTE

RVA

L

D

J

L

C

A

3203100 3206100 3212100 3220100 3203500 3206500 3212500

3 ton 6 ton 12 ton 20 ton 3 ton 6 ton 12 tonModel

Capacity

A (mm)B (mm)C (mm)D (mm)I (mm)J (mm)L (mm)



Pcs/20ft Cont.

294437143296075

121-

5.25.51

0.0201343

375575200408080

339-

10.612.0

10.047600

481752265539090

389-

23.525.5

10.073336

568923355798090

524-

34.438.5

10.169172

292432140152790

1901706.06.41

0.0161760

390618228183111027023513.714.5

10.038708

445700255233712030727424.525.8

10.063415

Tubing Ratchet

L

FEB

DC

A

3207500 3222500 3203900 3210901


Capacity

A (mm)B (mm)C (mm)D (mm)E (mm)F (mm)G (mm)L (mm)

W (mm)H (mm)

N.W. (kg)G.W. (kg)


Pcs/20ft Cont.

238.5360

121.5556490-

220--

9.611.1

10.0231152

310505195557080-

250--

27.828.8

10.034832

130020007005080110

-837

--

21.924.3

10.059429

71111944835080

125-

407--

50.054.2

10.228120

Heavy Duty

Specifications

31

Hydraulic pit jackMagic lift

< Pit jackModel: 46030 | 300 kg | Max 2105mm / Min 1280mm 46060 | 600 kg | Max 2097mm / Min 1267mm 46100 | 1000 kg | Max 2146mm / Min 1316mm

• Magic lift hydraulic unit reaches the desired height twice as fast as traditional models without magic lift.

• By turning the saddle upside down, it can also be used as extra support.

Reversible

SaddleArt. 21030-04

Saddle padArt. 2903509100

Transmission Saddle41901 (Optional for the 46100)

Transmission SaddleS0501T (Optional for the 46030)

46030 46060 46100

300 kg 600 kg 1000 kgModel

Capacity


W (mm)H (mm)

N.W. (kg)G.W. (kg)


Pcs/20ft Cont.

1280210582510090076

435575600

105231.034.1

10.0971

270

1267209783010087376

435575600

102836.339.4

10.0971

270

13162146830100931125435720640

108643.949.4

10.103210

Magic lift

GD

C

AEH

F

B

L

W

Supporting DeviceM9409 (Optional) See Page 105 for more content

32

< 41000CModel: 41000C - Manual 41001 - Air OperatedCapacity: 500 kg | max 2026mm / min 1016mm

• Effortless air operation will greatly reduce operator's

• 8-14 BAR suggested air pressure for optimal perfor-mance.

42001 >Single stage air operatedCapacity: 1000 kg | max 2163mm / min 1433mm

• Effortless air operation will greatly reduce operator's

• 8-14 BAR suggested air pressure for optimal perfor-mance.

Transmission jacksHeavy duty

< 4200000Model: 41100C | 500 kg | max 630mm / min 343mm 4200000 | 1000 kg | max 850mm /min 320mm

• Load-restraining chain for safety.• Head adjustable in all directions for optimal alignment of

transmission bolt patterns and pins.• Rugged steel wheels and full swivel ball bearing casters.• Multi-adjustment knobs ensure that transmission cradle is

always at the right angle to position and accept any load.

33

Transmission jacksHeavy duty

< 43000Capacity: 1500 kg | max 1195mm / min 450mm

• Load-restraining chain for safety.• Head adjustable in all directions for optimal alignment

of transmission bolt patterns and pins.• Rugged steel wheels and full swivel ball bearing

casters.• Multi-adjustment knobs ensure that transmission cradle

is always at the right angle to position and accept any load.

41000C 41001 42001 41100C 4200000 43000

500 kg 500 kg 1000 kg 500 kg 1000 kg 1500 kgModel

Capacity

A (mm)B (mm)C (mm)

C1 (mm)C2 (mm)D (mm)E (mm)F (mm) G (mm)L (mm)



Pcs/20ft Cont.

10162026101049052055354779

84090373.581.8

10.175170

1016202610104905205535477984090381.589.8

10.175170

14332163730

--

19845-

10010021069130.0143.8

10.246

85

343630400

--

114570

-58

79038043.048.2

10.105224

320850650

--

120570

-73

103848584.891.0

10.130184

4501195745

--

250740

-1001188650

133.5147.8

10.231104

Heavy duty

C1

C2 E

F

C

B

D

G W

L

Z

A E

L G

D

CB

W

A

34

< 50040 Capacity: 4 Ton

• Sets are portable for easy usage in shop or on the road.• Designed for applications such as pushing, spreading

and pressing of vehicle body panels as well as various component parts and assemblies.

50100 >Capacity: 10 Ton

• Sets are portable for easy usage in shop or on the road.• Designed for applications such as pushing, spreading

and pressing of vehicle body panels as well as various component parts and assemblies.

• Handy tubing storage compartment design.• With wheels.

Flat base

Plunger toe

Rubber head

Combi head

Ram toe

Serrated saddle

Wedged head Hose

Male connector Spreader

Body Repair KitsHeavy Duty

Model 50040 495mm420mm215mm155mm75mm

Model 50100 685mm 455mm 255mm105mm

Length extension bars:

35

Engine cranes Foldable

< 44017Model: 44017 - 44018Capacity: 1000 kg

• 44017 with MagicLift hydraulic unit.• 44017 + 44018, operating handle with 270 degrees

swiveling angle.• HTR (Hold-To-Run) mechanism.

PU-Wheels

270°

44012 > Capacity: 1000 kg

• Foldable cranes.• Unique folding design for easy, fast and compact storage.• HTR (Hold-To-Run) mechanism, designed to assure user's

maximum safety when the valve is released.

< 90150Equilizer (Optional)Capacity: 680 kg

Equalizer optional 90150

36

Engine cranes

< 44020 Capacity: 2000 kg

• Hard chrome plated piston rod.• Built in safety overload valve.• Retractable front legs and lifting boom for easy

storage.

Hydraulic long jack >Models: 44943 - 44947 - 44949 - 44980

• Polished ram plunger and cylinder protect seals from abrasion.• Built-in safety overload valve.

44943 44947 44949 44980

4 Ton 4 Ton 4 Ton 8 TonModel

Capacity


W (mm)H (mm)

N.W. (kg)G.W. (kg)


Pcs/20ft Cont.

6121120508113775030

16.016513062812.728.2

20.060972

6051113508113050030

16.01301146229.9

20.82

0.0301360

6121120508113750030

16.016513062811.425.0

20.0501056

6001085485109950035

18.012812061413.528.3

20.0431226

Hydraulic long jack

where indicated

< 90150Equilizer (Optional)Capacity: 680 kg

G

CF

A HD

E

B

W

L

37

44012 44017 44018 44020


Capacity

A (mm)B (mm)F (mm)L (mm)

M (mm)N (mm)

O (mm)N.W. (kg)G.W. (kg)

Pieces CartonWheels

Lifting Arm PositionOperating Swivel

HandleHTR (hold to run)

Magic Lift

Lock position of extension boom

CapacityMinimum hook

height (mm)Maximum hook

height (mm)Boom Length (mm)

13301540450845100038012573.080.0

1Metal

4

-

YesNo

146015255701060120035010084.094.0

1PU5

270°

YesYes

146015255701060120035010083.490.6

1PU5

270°

YesNo

139423051725735860

135089

105.0110.5

1Pc = 2CartonMetal

4

-

YesNo

P1

1000

280

2070

710

P2

850

200

2140

795

P3

700

125

2205

870

P4

550

50

2280

950

P1

1000

439

1978

620

P2

900

341

2021

720

P3

800

243

2075

820

P4

700

145

2131

920

P5

600

0

2170

1020

P1

2000

465

1760

1238

P2

1500

355

1910

1465

P3

1000

235

2065

1692

P4

500

127

2200

1919

Foldable Heavy Duty

O

A

B ML

N

F

Boom Length

Max. HookHeight Min.

Hook Height

44012 44017 & 44018 44020

Specifications

38

Engine Stands & SupportsHeavy Duty

31000 >Engine standCapacity: 500 kg

• Head plate locks in 8 positions and rotates 360°.

90068 ^ 1 spindle Capacity: 300 kg

• Feet and spindles are adjustable over the whole length of the support.

90165 v 2 spindles Capacity: 500 kg

NEW

Ball bearing makes turning the spindle easier

39

C

B EA D

A

1

2

3

D

B

C

AD

B

C

31000 90068 90165

500 kg 300 kg 500 kgModel

Capacity

A (mm)B (mm)C (mm)D (mm)E (mm)

Saddle BaseMin. Claw AreaMax. Claw Area

N.W. (kg)G.W. (kg)


Pcs/20ft Cont.

8088008787589

250x150292x122402x152

23.025.4

10.043700

1500205310243

----

12.513.5

10.0231250

1650205310243

----

16.017.5

10.0271000

Engine Stand Supports

Specifications

40

Presses > Model: 61154 - 61204 - 61304 - 61504Capacity: 15 - 20 - 30 - 50 Ton

• Excellent for bending, bonding or straightening applications.• Multi-position bed for work height adjustment (A-B).• Press bed of 50 Ton press moved by Winch.• Double speed pumps for fast ram moving without load.• Cylinder can be re-positioned in width (M).• Gauge indicates metric Tons.

< 61504Capacity: 50 Ton

Handwinch

PressesHeavy duty

61025 >Punch set

Grid guard >61015 - 61030 - 61050

41

Gauge Arbor plate Manual operation Foot operation

H

A

L W

W1

W2

M

C B61504

61154 61204 61304 61504


Capacity

StrokeA (mm)B (mm)C (mm)M (mm)L (mm)

W (mm)W1 (mm)W2 (mm) H (mm)

N.W. (kg)G.W. (kg)


Pcs/20ft Cont.

160168980160160540700500

-172791.5118.5

10.299

56

18535

912176176540730510

-17131121391

0.33156

160151

1031200200700795535

-1772166.7202.7

10.404

56

20069

1048245245800

1030730748

1830298

340.61

0.60756

Presses

Specifications

42

< 65124Capacity: 12 Ton

Optional:Gauge adaptor: 60153-50 (GBW1460)Fitting: 434-4-0000-000

60253 >Capacity: 25 Ton

Bench & Shop pressesHeavy duty

43

Bearing punch 60253

W

W

W1

W1 EDH

DL

A

A CC

L

H

F

B

B

W

C

65124 60253

12 ton 25 tonModel

Capacity

StrokeA (mm)B (mm)C (mm)D (mm)E (mm)F (mm)G (mm)H (mm)L (mm)

W (mm)W1 (mm)N.W. (kg)G.W. (kg)


Pcs/20ft Cont.

153,5378.5153.633.3175

---

72517555036549.155.7

10.052320

16563.586916580011557

2191495710710510

119.2123.8

20.086156

Presses

Gauge 6025365124 (optional!)

Arbor plate 60253 Gauge adaptor + Fitting65124 (optional!)

Specifications

44

Wheel arm & pipe bender

9210000 >EZ wheel arm

The EZ Wheel Arm is a great accessory to hold tyres on a vehicle lift arm. With the adjustable design, it can easily be used on lift arms of various thickness. The bar can be folded up or sideways when not in use to save space.

Supplied in pairs

Adjusts

Vertically

Adjusts

Horizontally

capacity of 45 kgs

< 6615000Pipe BenderCapacity: 15 Ton

• Complete with 8 former attachments for a wide variety of pipe diameters.

• Capable of bending high pressure/temperature tubing as well as standard hydraulic, gas, steel, aluminum and brass from 12.7mm up to 76.2mm with included attachments.

Cilinder capacity: 15 TonRam range: 251mmMax. working pressure: 700 BARProduct size: 770x779x970mmG.W.: 82.8 kg

12.7mm 19.1mm 25.4mm 31.8mm 38.1mm 50.8mm 76.2mm64mm

Min width 79 mmMax width 142 mm

Min height 76 mmMax height 123 mm

W W

H H

45

Car dolly set

47020 >Capacity: 900 kg per dolly

Can support the vehicle in three different ways:- By the wheel- By the pinch weld- By the frame

• No adapters required.• Integrated frame adapters.• Locking casters.• No tools required.• Adapter secured with pins.• Easily stacked for convenient storage.• Sold in pairs of two.

46

Tyre handling equipment

22910 >Bead BreakerCapacity: 5 Ton

• For single rimmed wheels, with a maximum rim size of 25".

• Oil capacity 250cc.

< 47053Wheel DollyCapacity: 680 kg

• Hydraulic system actuated to provide smooth, positive power for the removal and installation of single, tandem and duplex tyres and wheels.

• Adjustable cradle rollers and lifting height.

90250 >Move JackCapacity: 680 kg

• Ideal for manoeuvring cars in shops and showrooms.• Rigid steel frame - 680 kg capacity per jack, 2720 kg capacity

per 4 jacks set.• Handles tyres up to 12" - 305mm wide.• Easy foot pedal operation.

2 jacks: allow full 180° vehicle pivot. place vehicle on 360° rolling platform.

47

BD

C

A

EØ

F

H

G

J

F

K

G

A

BC

I

E

H

D

C

A

J I

H

E

F

GD

L K

47053 90250 47020 22910

680 kg 680 kg 900 kg 5 tonModel

Capacity

A (mm)B (mm)C (mm)D (mm)E (mm)F (mm)G (mm)H (mm)I (mm)J (mm)K (mm)L (mm)

N.W. (kg)G.W. (kg)


Pcs/20ft Cont.

60922063885

12550858348

10731090883

-68.072.2

10.129144

30534554062510219068

560----

35402

0.134400

352458515187

-38019060101

---

36.2382

280560

397-

131.5735523033020953813810014.016.4

10.0221125

Wheel Dolly Bead BreakerMove Jack

Specifications

Car Dolly

48

Hydraulic hand pumps >Model: 55040 - 55100Capacity: 270cc / 700 BAR - 770cc / 700 BAR

• Built-in safety overload valve.

Hydraulic cylinders >Model: 55109 - 55049Capacity: 10 Ton - 4 Ton

• Internal plunger wipers help seal out dirt and a guide ring is designed to protect against side load damage.

• Industrial hard chrome-plated ram helps to prevent rust and corrosion.

• Maximum working pressure: 700 BAR / 10000psi.

55109Also included in the auto-body repair-kit 50100. (page 34)55049Also included in the auto-body repair-kit 50040. (page 34)

< Air actuated treadle pumpModel: 22903Capacity: 1500cc / 700 BAR

• Built-in safety overload valve.• Durable lightweight aluminum reservoir.• Foot pedal provides hand-free user-friendly operation.

5504955109

< Pull cylindersModel: 71055 - 71105Capacity: 5 Ton - 10 Ton

Pumps & CylindersHeavy duty

49

C B

A

D

G

FE

D

A

C

B

D E

AB

C

F

BA

D

C

F

1 1/4”-NPT1 1/4”-NPT

55040 55100 22903 55049 55109 71055 71105

700 BAR 700 BAR 700 BAR 4 ton 10 ton 5 ton 10 tonModel

Capacity

Oil Capacity (cc)A (mm)B (mm)C (mm)D (mm)E (mm)F (mm)G (mm)

Weight (kg)N.W. (kg)G.W. (kg)


Pcs/20ft Cont.Hose Length (mm)

CouplerPressure Rating

(BAR)Output Flow Rate

(cm3 / min)No Load

LoadAir pressure range

(BAR)

270400310147130

----

6.16.61

0.0141980

13x18181/4" NPTF-18

-

--

-

770480500147130

----

7.27.81

0.0201320

13x18181/4" NPTF-18

-

--

-

1500263126

1/4" NPTF-183/8" NPTF-18

1851301368.2-------

700

1075180

7-14

100274397123384425--

1.88.61

0.0018780

--

-

--

-

290348502154586641--

4.95.11

0.0043529

--

-

--

-

10629443514158-

32--

3.88.62

0.0073456

-1/4" NPTF

700

--

-

23629044015070-

32--

5.512.0

20.0083000

-1/4" NPTF

700

--

-

Foot pumpHydraulic pumps Hydraulic cylinders Pull Cylinders

Specifications

50

Lift

ing

equi

pmen

t

51

Index

Bottle jacks Page 52

Floor jacks Page 53

Garage jacks Page 54


Jacks stands Page 56

Lawn mower lift Page 57

Engine crane & body repair kit Page 58

Pit jack Page 59

52

Bottle jacks

• Steel lifting saddle created for load gripping power.• Extension screw adjusts to accommodate work height.• Patented bypass device protects against over-pumping.• Heat treated critical stress areas ensure long life performance.• Meets or exceeds CE & ANSI/PALD standards.• Ideal for auto, truck service, farm and shop use.

B0200 >Bottle Jack - 2 Ton

B0200: 95mm x 95mm x 183mm (LxWxH)Lifting Range: 183-348mm

< B0400Bottle Jack - 4 Ton


B0600 >Bottle Jack - 6 Ton


53

Floor jacks

< F5210Floor jack extra high (SUV) lift - 2.25 Ton

F5210: 719mm x 249mm x 150mm (LxWxH)Lifting Range: 150-533mm

F7670 >


F2000 >Floor jack - 2 Ton


F2000 B >Floor jack in blow mold case - 2 Ton

54

Garage jacks

< G3003Garage Jack - 3 Ton

G3003: 680mm x 334mm x 110mm (LxWxH)Lifting Range: 120-456mm• Double Piston.• Universal Joint.• Bypass System to prevent overloading

and over-pumping.• Compactly Build.• Including Saddle Pad.

< G2000

G2000: 725mm x 340mm x 145mm (LxWxH)Lifting range: 88-485mm • Double Piston.• Universal Joint.• Bypass System to prevent overloading

and over-pumping.• Compactly Build.• Including Saddle Pad.

G2250 >Garage Jack - 2.25 Ton.

G2250: 644mm x 335mm x 165mm (LxWxH)Lifting Range: 135-495mm• Gear type.• Bypass System to prevent overloading

and over-pumping.• Compactly Build.

G1250 >

G1250: 553mm x 238mm x 89mm (LxWxH)Lifting range: 89-354mm • Double Piston.• Universal Joint.• Bypass System to prevent overloading

and over-pumping.• Compactly Build.• Including Saddle Pad.• Aluminum frame with steel lifting arm.

55

F2000 F7670 F5210 G1250 G2000 G2250 G3003

2 ton 2 ton 2.25 ton 1.25 ton 2.5 ton 2.25 ton 3 tonModel

Capacity

A (mm)B (mm)

Stroke C (mm)E (mm)F (mm)I (mm)J (mm)L (mm)

W (mm)H (mm)

N.W. (kg)G.W. (kg)


Pcs/20ft Cont.

Soft Saddle-Pad

Universal Joint

Air vent valve or

Wheels

135350220500486035

49021011510.2111

0.018x

-

-

-

Metal

85373288500606540

56021214513.3141

0.025x

-

-

-

Metal

150533383620607550

71925012519.4211

0.036x

-

-

-

Metal

893542659461005040

55323814215

16.31

0.030x

x

x

-

Metal

8848539711001107055

72534014032341

0.053x

x

x

-

Metal

13549536011001109050

74034514030.231.5

10.054

x

-

-

-

Metal

1204563361145110805868033416232

34.21

0.049x

x

x

-

Metal

Hydraulic service jacks


MetalWheels

Universal Joint

A

F

I J

H

W

L

BC E

Specifications

56

Jack stands

• High quality cast ductile iron ratchet bar.• Ideal for auto, truck service, farm and shop use.• Height adjustment mechanism allows smooth upward movement while release handle locks into position.• Meets or exceeds ANSI/PALD standards.• Sturdy stamped steel construction.

T3004 >Jack Stands Ratchet (Extra High) - 2.25 Ton

T3004: 215mm x 170mm x 340mm (LxWxH)Lifting Range: 340-535mm

T2002 >Jack stands foldable - 2 Ton

G2002: 250mm x 250mm x 249mm (LxWxH)Lifting Range: 280-355mm

< T3003Jack Stands Ratchet - 2.8 Ton

T3003: 208mm x 180mm x 284mm (LxWxH)Lifting Range: 305-450mm

57

Lawn mower lift

T5350B >Lawn mower lift

Capacity: 155 kgLift height: 508mmWeight: 36,5 kgCompatible wheel track: 116,8cm - 129,5cm outside span

• Perform necessary mower maintenance .• Easy, convenient hydraulically powered foot pedal operation .• Rubber coated saddle to prevent unwanted movement .• Welded solid steel construction.• Positive dual locking safety latch for added safety. • Four steel wheels for sturdy mobility.• Patent pending .• Extra side breackets for more stability.

Lawn mower lift instruction video:

58

Engine crane & body repair kit

• Polished ram plunger and cylinder protects seals from abrasion.• Foldable model with retractable front legs and lifting boom for easy storage.• Built-in safety valve ensures operator’s safety against overloading.• Heavy duty welded construction with rugged reinforced tubular steel.

< C1001Foldable Engine Crane

C1001: 1540mm x 1000mm x 1330mm (LxWxH)Capacity: 1000 kgLifting Range: 50-2280mm

< A100010 Ton Body repair kit

Boom Length

Max. HookHeight Min.

Hook Height

Lock position of extension boom

CapacityMinimum hook

height (mm)Maximum hook

height (mm)Boom Length (mm)

N.W. (kg)G.W. (kg)

P1

1000

280

2070

710

P2

850

200

2140

795

P3

700

125

2205

870

P4

550

50

2280

950

C1001

73.080.0

• Sets are portable for easy usage in shop or on the road.• Designed for applications of pushing, spreading and pressing of vehicle body panels as well as various component parts and assemblies.

59

Pit jack

P0501 >Pit Jack

P0501: 600mm x 600mm x 1100mm (LxWxH)Capacity: 500 kgLifting Range: 1100-1900mm

HTR (Hold-To-Run) mechanism, designed to assure users maximum safety when the valve is released.

P0501

500 kgModel

Capacity


W (mm)H (mm)

N.W. (kg)G.W. (kg)


Pcs/20ft Cont.

1100190070050

77576

32560060097528301

0.069

Pit Jack

GD

C

AEH

F

B

L

W

Transmission SaddleS0501T (Optional)

Supporting DeviceM9409 (Optional) See Page 105 for more content

60

Pro

fess

iona

l han

d to

ols

61

Index

Tool cabinet & Tool trolley Page 62 - 65

Modules (sets) Page 66 - 67

Modules Page 68 - 73

Socket sets Page 74 - 79

Tool set Page 80 - 83

Adaptor sets Page 84 - 85

Ratchet handles Page 86

Gear wrench & sets Page 87 - 89

Combination & Adjustable wrenches Page 90 - 91

Pliers set & Wire cutters Page 92 - 93

Screwdrivers Page 94 - 95

Torque wrenches & Ratchet handles Page 96 - 97

Air impact wrenches Page 98 - 100

Cordless Impact wrenches Page 101

Impact sockets & Adapters Page 102 - 103

Automotive misc & Clutch tools Page 104 - 107

Bearing driver & Oil filling system Page 108 - 109

Bit sets Page 110

Rethreading & Locking nut extractor set Page 111

Pullers & Splitters Page 112 - 113

Punch, chisel & Hex key sets Page 114

Wrench, Twist drill bits & Oil drain plug key set Page 115

Tyre bead seater & Heavy duty pry bars Page 116

Dead blow hammer & Magnetic holders Page 117

Induction heater Page 118 - 119

Hot stapler Page 120

Auto body repair tools Page 121

Mechanix display unit Page 122 - 123

62

Tool cabinet

M3531 >Tool Chest - 3 Drawers & Top

Top Chest 676 x 459 x 400Drawer x3 568 x 398 x 75

M3500 - MDF02 >Wooden Top Plate

Top Plate 676 x 459 x 30

63

M3760 >Tool Cabinet - 6 Drawers• Handle for push or pull

Top Cabinet 676 x 459 x 815Drawer x5 568 x 398 x 75Drawer x1 568 x 398 x 154

- You can only open 1 drawer at

< M3770Tool Cabinet - 7 Drawers• Handle for push or pull

Top Cabinet 676 x 459 x 1005Drawer x5 568 x 398 x 75Drawer x2 568 x 398 x 154

- You can only open 1 drawer at

64

Tool cabinet & Tool trolley

M3591 >Tool Cabinet - 6 Drawers & 1 Locker• 1 Locker with 2 drawers. (Adjustable in height)• Handle for push or pull

Tool Cabinet 1044 x 459 x 1035Drawer x1 938 x 398 x 135Drawer x5 568 x 398 x 75Drawer x1 568 x 398 x 154Locker x1 330 x 398 x 588Drawer x2 300 x 390 x 75

< M3593Tool Trolley - 3 Drawers• Handle for push or pull

Tool Trolley 860 x 440 x 1000Drawer x3 568 x 398 x 75

65

< M3397Tool Trolley - 3 Trays• Handle for push or pull

Tool Trolley 910 x 459 x 985Load per shelf max. 35 kg

M3379 >Tool Chest - 9 Drawers & Top• With Ball bearing slides

Tool Chest 660 x 307 x 433Drawer x6 170 x 270 x 50Drawer x2 570 x 270 x 50Drawer x1 570 x 270 x 75

M3350 >• Metal Tool Box

Tool Box 475 x 200 x 200mm

66

Tool ModulesMD02 & MD12

M0023 >Drawer 1

M0127 >Drawer 2

M0032 >32 Pc Bit SetSee page 110

M0048 >48 Pc 1/4" Drive Socket Set



M0078 >78 Pc Bit Set

M003232 Pc Bit Set

M8308 >8 Pc Screwdriver Set

M8207 >7 Pc T-Handle BallPoint & Hex KeyWrench Set

M8107 >7 Pc T-HandleTorx Tamperproof& Torx KeyWrench Set

M0013 >13 Pc CombinationWrench Set

M8306 >6 Pc Torx Screwdriver Set

M0012 >12 Pc GearWrench Set

M8304 >4 Pc Deluxe Pliers Set

M8011 >11 Pc Hammer & Punch Set

Drawer 1

Drawer 2

Drawer 3

Drawer 4

MD02

MD12

67




M0078 >78 Pc Bit Set

M003232 Pc Bit Set

M8308 >8 Pc Screwdriver Set

M8207 >7 Pc T-Handle BallPoint & Hex KeyWrench Set

M8107 >7 Pc T-HandleTorx Tamperproof& Torx KeyWrench Set



M8306 >6 Pc Torx Screwdriver Set

M8204 >4 Pc Circlip Pliers Set

M0012 >12 Pc GearWrench Set

M8304 >4 Pc Deluxe Pliers Set

M8011 >11 Pc Hammer & Punch Set

M0006 >6 Pc Double Flexible Socket Wrench Set

Tool ModulesMD15

Drawer 1

Drawer 2

Drawer 3

Drawer 4

Drawer 5

MD15

68

Modules

< M0032Bit Set - 32 PcSee Page 110for contents

M0127 >Handtools - 127 Pc - 1/2"Dr. & 1/4"Dr. Sockets - Bits

M0127: 565mm(L) x 393mm(W) x 55mm(H)

Content - 1/2" Dr. :Ratchet Handle (Quick release / 72 Teeth)Swivel Handle - 390mmUniversal JointExtension Bar - 5"/125mmExtension Bar - 10"/250mmSocket (6pt / mm) : 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 -

19 - 20 - 21 - 22 - 24 - 27 - 30 - 32 - 34E-Socket (6pt) : E12 - E14 - E16 - E18 - E20 - E22 - E24Deep Socket (6pt / mm) : 14 - 15 - 17 - 18 - 19 - 22 - 24Spark Plug Socket (6pt / mm) : 16 - 21Shank Bit Adaptor - 5/16"

Content - 1/4" Dr. :Ratchet Handle (Quick release / 72 Teeth)Universal JointSpinner Handle - 150mmBit Hex + Electric Wrench AdaptorBit Adaptor - 1/4"Flex Bar - 150mmExtension Bar - 2"/50mmExtension Bar - 4"/100mmSocket (6pt / mm) : 4 - 4.5 - 5 - 5.5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13E-Socket (6pt) : E4 - E5 - E6 - E7 - E8 - E10 - E11Deep Socket (6pt / mm) : 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13

Content - Others :3-Way Adaptor : 3/8"F x 1/4"M - 3/8"F x 1/2"MHex Key Set (mm) : 1.5 - 2 - 2.5

Shank Bits - 5/16"Hex : H10 - H12 - H14Philips : PH4Pozi : PZ4 < M0023

Handtools - 23 PcScrewdriver, Pliers & Wrench

M0023: 565mm(L) x 393mm(W) x 55mm(H)

Content:Combination Wrench (mm) : 8 - 9 - 10 - 11 -12 - 13 -

14 - 15 - 16 - 17 - 19Water Pliers - 250mmLong Nose Pliers - 200mmCombination Pliers - 180mmDiagonal Cutter - 160mm

Screwdrivers :Slotted (mm) : 5x75, 6x100, 6x150, 8x200Philips : PH1x75, PH2x100Stubby - 38mm : SL6 - PH2

Spline : M5 - M6 - M8 - M10 -M12Slotted (mm) : 8 - 10 - 12Torx Tamperproof : TT45 - TT50 - TT55 - TT60

69

Modules

M0027 >1/2" Dr. Socket set - 27 Pc

M0027: 390mm(L) x 187mm(W) x 50mm(H)

Content: Ratchet Handle (Quick release / 72 Teeth)Universal Joint3-Way Adaptor : 3/8"F - 1/2"MExtension Bar - 5"/125mmExtension Bar - 10"/250mmSocket (6pt / mm) : 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 -

19 - 20 - 21 - 22 - 24 - 27 - 30 - 32Deep Socket (6pt / mm) : 14 - 15 - 17 - 19 - 22


M0048: 390mm(L) x 187mm(W) x 45mm(H)

Content: Ratchet Handle (Quick release / 72 Teeth)Universal Joint3-Way Adaptor : 3/8"F - 1/4"MBit Hex + Electric Wrench Adaptor - 1/4"Spinner Handle - 150mmExtension Bar - 2"/50mmExtension Bar - 6"/150mmSocket (6pt / mm) : 4 - 4.5 - 5 - 5.5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13Deep Socket (6pt / mm) : 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13

Bit Sockets :Slotted (mm) : 4 - 5.5 - 6.5Philips : PH1 - PH2 - PH3Pozi : PZ1 - PZ2 - PZ3Torx Tamperproof : TT10 - TT15 - TT20 - TT25 - TT27 - TT30 - TT40Hex : H3 - H4 - H5 - H6 - H8


M0029: 390mm(L) x 187mm(W) x 45mm(H)

Content:Ratchet Handle (Quick release / 72 Teeth)Universal Joint3-Way Adaptor : 1/2"F - 3/8"MExtension Bar - 3"/75mmExtension Bar - 6"/150mmSocket (6pt / mm) : 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 -

15 - 16 - 17 - 18 - 19 - 20 - 21 - 22Deep Socket (6pt / mm) : 10 - 12 - 13 - 15 - 17Spark Plug Socket (6pt / mm) : 16 - 21

70

Modules

M0012 >Gear Wrench set - 12 Pc

M0012: 390mm(L) x 187mm(W) x 45mm(H)

Content: Gear Wrench (mm) : 8 - 10 - 12 - 13 - 14 - 15 - 17 - 19Adaptors1/4" Dr. (Quick release) : 10 mm1/2" Dr. (Quick release) : 13 mm3/8" Dr. (Quick release) : 19 mm1/4" Dr. Bit (Mirror polish) : 10 mm

< M2012Reversible Gear Wrench set - 12 Pc

M2012: 390mm(L) x 187mm(W) x 55mm(H)

Content: Gear Wrench (mm) : 8 - 10 - 12 - 13 - 14 - 15 - 17 - 19Adaptors1/4" Dr. (Quick release) : 10 mm1/2" Dr. (Quick release) : 13 mm3/8" Dr. (Quick release) : 19 mm1/4" Dr. Bit (Mirror polish) : 10 mm

M0013 >Combination Wrench set - 13 Pc

M0013: 390mm(L) x 187mm(W) x 50mm(H)

Content: Combination Wrench (mm) : 8 - 9 - 10 - 11 - 12 - 13 - 14 -

15 - 16 - 17 - 18 - 19 - 22

< M8104Combination Wrench set - 4 Pc

M8104: 390mm(L) x 187mm(W) x 50mm(H)

Content: Combination Wrench (mm) : 24 - 27 - 30 - 32

71

< M8203Offset Ring Wrench set - 3 Pc

M8203: 390mm(L) x 187mm(W) x 55mm(H)

Content: Offset Ring Wrench (mm) : 24/26 - 25/28 - 30/32

M0006 >Double Flexible Socket Wrench set - 6 Pc

M0006: 390mm(L) x 190mm(W) x 60mm(H)

Content: Double Flexible Socket Wrench (mm) : 8/9 - 10/11 - 12/13 - 14/15 -

16/17 - 18/19

< M8204Circlip Pliers set - 4 Pc

M8204: 390mm(L) x 190mm(W) x 60mm(H)

Content: External Straight - 180 mmExternal Bent - 180 mmInternal Straight - 180 mmInternal Bent - 180 mm

M8304 >Deluxe Pliers set - 4 Pc

M8304: 390mm(L) x 190mm(W) x 60mm(H)

Content: Water Pliers - 250mmLong Nose Pliers - 200mmCombination Pliers - 180mmDiagonal Pliers - 160mm

Modules

72

< M8306Trox Screwdriver set - 6 Pc

M8306: 390mm(L) x 187mm(W) x 45mm(H)

Content: Torx Screwdriver- 100mm: T10 - T15 - T20 - T25 - T30- 115mm: T40

< M8107T-Handle Torx Tamperproof & Torx Key Wrench set - 7 Pc

M8107: 390mm(L) x 187mm(W) x 40mm(H)

Content: T5 Handle Torx Tamperproof Wrench& Torx Key Wrench- 100mm: T10 - T15- 150mm: T20 - T25 - T27 - T30 - T40

M8207 >T-Handle Ball Point & Hex Key Wrench set - 7 Pc

M8207: 390mm(L) x 187mm(W) x 40mm(H)

Content: T5 Handle Ball Point & Hex Key Wrench- 100mm: H2 - H2.5 - H3- 150mm: H4 - H5 - H6- 200mm: H8

M8308 >Screwdriver set - 8 Pc

M8308: 390mm(L) x 187mm(W) x 45mm(H)

Content: Slotted (mm) : 5 x75Slotted with Hex (mm) : 6 x100 - 6 x150 - 8 x200Philips: PH1 x75Philips with Hex : PH2 x100Stubby - 38mm : SL6 - PH2

Modules

73

< M00171/2"Dr. Impact Socket set - 17 Pc

M0017: 390mm(L) x 187mm(W) x 55mm(H)

Content: Impact Socket- 38mm (mm) : 10 - 11 - 12 - 13 - 14 - 15 -

16 - 17 - 19 - 21 - 22- 42mm (mm) : 24- 82mm (mm) : 17 - 19 - 21 - 22 - 24

< M8000Storage module

M8000: 390mm(L) x 187mm(W) x 55mm(H)

M0078 >5/16" Bit set - 78 Pc

M0078: 390mm(L) x 187mm(W) x 50mm(H)

Content: Stubby Ratchet Bit HandlePhilips - 30mm : PH2 - PH3Slotted - 30mm (mm) : 8 - 10Torx Tamperproof - 30mm : TT20 - TT25 - TT27 - TT30 - TT40 - TT45 - TT50 - TT55 - TT60Torx Tamperproof - 75mm : TT20 - TT25 - TT27 - TT30 - TT40 - TT45 - TT50 - TT55 - TT60Torx Tamperproof - 120mm : T40 - T45 - T50 - T55Spline - 30mm : M5 - M6 - M8 - M10 - M12Spline - 75mm : M5 - M6 - M8 - M10 - M12Hex - 30mm : H5 - H6 - H7 - H8 - H10 - H12Hex - 75mm : H5 - H6 - H7 - H8 - H10

M8011 >Hammer & Punch set - 11 Pc

M8011: 390mm(L) x 187mm(W) x 40mm(H)

Content: Punch (mm) : 2x115, 3x125, 4x150, 5x165, 6x180, 8x180Center Punch (mm) : 2x120Cold Chisel (mm) : 18x128Soft Face Hammer (PU) : 460gr/35mmEnginers Hammer : 300gr

Modules

M0032 >Bit Set - 32 PcSee Page 110for contents

74

Socket set


M1443: 290mm(L) x 210mm(W) x 60mm(H)

Content:Ratchet Handle (Quick release / 72 Teeth)Universal JointSpinner Handle - 150mmExtension Bar - 2"/50mmExtension Bar - 6"/150mmSocket (6pt / mm) : 4 - 4.5 - 5 - 5.5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13Deep Socket (6pt / mm) : 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13Bit Adaptor - 1/4"

Shank Bits :Philips : PH1 - PH2Pozi : PZ1 - PZ2Slotted (mm) : 4 - 5.5Torx Tamperproof : TT10 - TT15 - TT20 - TT25 - TT27 - TT30Hex : H3 - H4 - H5 - H6

Material : Socket = CR-V / Bit = S2

75

Socket set


M3852: 380mm(L) x 280mm(W) x 80mm(H)

Content:Ratchet Handle (Quick release / 72 Teeth)Universal JointExtension Bar - 3"/75mmExtension Bar - 6"/150mmSocket (6pt / mm) : 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 - 19 - 20 - 21 - 22Deep Socket (6pt / mm) : 10 - 12 - 13 - 15 - 17Spark Plug Socket (6pt / mm) : 16 - 213-Way Adaptor - 1/2"F

Bit Sockets :Philips : PH1 - PH2 - PH3Pozi : PZ1 - PZ2Slotted (mm) : 5.5 - 6.5Torx Tamperproof : TT10 - TT15 - TT20 - TT25 - TT30 - TT40 - TT45 - TT50 - TT55Hex : H3 - H4 - H5 - H6 - H7 - H8 - H10


76

M1395 >1/4" & 3/8" Dr. Socket set - 95 Pc

M1395: 380mm(L) x 260mm(W) x 70mm(H)

Content - 1/4" Dr. :Ratchet Handle (Quick release / 72 Teeth)Universal Joint3-Way Adaptor - 3/8"FBit Adaptor - 1/4"Spinner Handle - 150mmExtension Bar - 2"/50mmExtension Bar - 6"/150mmSocket (6pt / mm) : 4 - 4.5 - 5 - 5.5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13Deep Socket (6pt / mm) : 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13

Bits :Philips : PH1 - PH2Pozi : PZ1 - PZ2Slotted (mm) : 4 - 5.5Torx Tamperproof : TT10 - TT15 - TT20 - TT25 - TT27 - TT30Hex : H3 - H4 - H5 - H6


Content - 3/8" Dr. :Ratchet Handle (Quick release / 72 Teeth)Universal Joint3-Way Adaptor - 1/2"FExtension Bar - 3"/75mmExtension Bar - 6"/150mmSocket (6pt / mm) : 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 -

18 - 19 - 20 - 21 - 22Deep Socket (6pt / mm) : 10 - 12 - 13 - 15 - 17Spark Plug Socket (6pt / mm) : 16 - 21

Bit Sockets :Philips : PH1 - PH2 - PH3Pozi : PZ1 - PZ2Slotted (mm) : 5.5 - 6.5Torx Tamperproof : TT10 - TT15 - TT20 - TT25 - TT30 -

TT40 - TT45 - TT50 - TT55Hex : H3 - H4 - H5 - H6 - H7 - H8 - H10

Socket set

77

Socket set

M1297 >1/4" & 1/2" Dr. Socket set - 97 Pc

M1297: 380mm(L) x 280mm(W) x 80mm(H)

Content 1/4" Dr.:Ratchet Handle (Quick release / 72 Teeth)Universal Joint3-Way Adaptor - 3/8"FSpinner Handle - 150mmExtension Bar - 2"/50mmExtension Bar - 6"/150mmSocket (6pt / mm) : 4 - 4.5 - 5 - 5.5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13Deep Socket (6pt / mm) : 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13E-Socket (6pt / mm) : E6 - E7 - E8 - E10 - E11

Bit Sockets :Philips : PH1 - PH2Pozi : PZ1 - PZ2Slotted (mm) : 4 - 5.5 - 6.5Torx Tamperproof : TT10 - TT15 - TT20 - TT25 - TT27 - TT30 - TT40Hex : H3 - H4 - H5 - H6 - H8


Content - 1/2" Dr. :Ratchet Handle (Quick release / 72 Teeth)Universal Joint3-Way Adaptor - 3/8"FShank Bit Adaptor - 5/16"Extension Bar - 5"/125mmExtension Bar - 10"/250mmSocket (6pt / mm) : 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 -

19 - 20 - 21 - 22 - 24 - 27 - 30 - 32Deep Socket (6pt / mm) : 14 - 15 - 17 - 19E-Socket (6pt / mm) : E12 - E14 - E16 - E18 - E20Spark Plug Socket (6pt / mm) : 16 - 21

Content - others : Shank Bits - 5/16"Philips : PH3 - PH4Pozi : PZ3 - PZ4Slotted (mm) : 8 - 10 - 12Torx Tamperproof : TT40 - TT50 - TT55Hex : H10 - H12 - H14

78

Socket sets


M1228: 380mm(L) x 280mm(W) x 90mm(H)

Content:Ratchet Handle (Quick release / 72 Teeth)Universal Joint3-Way Adaptor - 3/8"FExtension Bar - 5"/125mmExtension Bar - 10"/250mmSocket (6pt / mm) : 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 -

19 - 20 - 21 - 22 - 24 - 27 - 30 - 32Deep Socket (6pt / mm) : 14 - 15 - 17 - 19Spark Plug Socket (6pt / mm) : 16 - 21

Material : CR-V

< M3414 3/4" Dr. Socket set - 14 Pc

M3414: 500mm(L) x 390mm(W) x 100mm(H)Content: Ratchet Handle (Quick release / 72 Teeth / Solid / 500mm)Extension Bar - 4"/100mmExtension Bar - 8"/200mmSliding T-Bar - 450mmSocket (6pt / mm) : 22 - 24 - 27 - 30 - 32 -

36 - 38 - 41 - 46 - 50

Material : CR-V

79

Socket sets


M5713: 536mm(L) x 345mm(W) x 98mm(H)

Content: Ratchet Handle (40 Teeth)Extension Bar - 4"/100mmExtension Bar - 8"/200mmExtension Bar - 16"/400mmSliding T-Bar - 450mmSocket (6pt / mm) : 19 - 21 - 22 - 23 - 24 - 26 - 27 - 29 -

30 - 32 - 35 - 36 - 38 - 41 - 46 - 50

Material : CR-V

M8015 >1" Dr. Socket Wrench set with metal case - 15 Pc

M8015: 500mm(L) x 390mm(W) x 100mm(H)

Content: Ratchet HandleReversible Handle - 635mmExtension Bar - 8"/200mmExtension Bar - 16"/400mmSliding T-Bar - 450mmSocket (6pt / mm) : 36 - 41 - 46 - 50 - 55 - 60 - 65 - 70 - 75 - 80

Material : CR-V

80

M0105 >1/4" & 1/2" Dr. Socket set in aluminum case - 105 Pc

M0105: 565mm(L) x 350mm(W) x 100mm(H)

Content - 1/4" Dr. :Ratchet Handle (Quick release / 72 Teeth)Universal JointSpinner Handle - 150mmExtension Bar - 2"/50mmExtension Bar - 4"/100mmSocket (6pt / mm) : 4 - 4.5 - 5 - 5.5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13Deep Socket (6pt / mm) : 8 - 10 - 13E-Socket (6pt) : E6 - E7 - E8

Bit Sockets :Philips : PH1 - PH2Pozi : PZ1 - PZ2Spline : M4 - M5 - M6Torx Tamperproof : TT10 - TT15 - TT20 - TT25 - TT27 - TT30 - TT40Hex : H3 - H4 - H5 - H6

Content - Others :Ball Key set (mm) : 1.5 - 2 - 2.5 -3 - 4 - 5 - 6 - 8 - 10Combination Wrench (mm) : 8 - 10 - 12 - 13 - 14 - 17 - 19

Bits - 30mm : 5/16"Philips : PH3Pozi : PZ3Spline : M8 - M10 - M12Torx Tamperproof : TT45 - TT50 - TT55 - TT60Hex : H8 - H10

Content - 1/2" Dr. :Ratchet Handle (Quick release / 72 Teeth)Universal JointShank Bit Adaptor - 5/16"3-Way Adaptor - 3/8"FExtension Bar - 4.5"/115mmExtension Bar - 10"/250mmSocket (6pt / mm) : 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 -

19 - 20 - 21 - 22 - 24 - 27 - 30 - 32 - 34Deep Socket (6pt / mm) : 14 - 15 - 17 - 19 - 22E-Socket (6pt) : E10 - E12 - E14 - E16 - E18 - E20Spark Plug Socket (6pt / mm) : 16 - 21

Bit Sockets :Philips : PH1 - PH2Pozi : PZ1 - PZ2Spline : M4 - M5 - M6Torx Tamperproof : TT10 - TT15 - TT20 - TT25 - TT27 - TT30 - TT40Hex : H3 - H4 - H5 - H6Carton=2 pcs / CBM=0.04


Tool set

81

M1500 >1/2" Dr. & 1/4" Dr. Sockets - 150 Pc

M1500: 560mm(L) x 390mm(W) x 60mm(H)

Content - 1/2" Dr. :Ratchet Handle (Quick release / 72 Teeth)Swivel Handle - 390mmUniversal Joint3-Way Adaptor - 3/8"FExtension Bar - 5"/125mmExtension Bar - 10"/250mmSocket (6pt / mm) : 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 -

19 - 20 - 21 - 22 - 24 - 27 - 30 - 32 - 34E-Socket (6pt) : E12 - E14 - E16 - E18 - E20 - E22 - E24Deep Socket (6pt / mm) : 14 - 15 - 17 - 18 - 19 - 22 - 24Spark Plug Socket (6pt / mm) : 16 - 21Shank Bit Adaptor - 5/16"

Content - 1/4" Dr. :Ratchet Handle (Quick release / 72 Teeth)Universal JointSpinner Handle - 150mmBit Hex + Electric Wrench Adaptor - 1/4"Bit Adaptor - 1/4"3-Way Adaptor - 3/8"FFlex Bar - 150mmExtension Bar - 2"/50mmExtension Bar - 4"/100mmSocket (6pt / mm) : 4 - 4.5 - 5 - 5.5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13E-Socket (6pt) : E4 - E5 - E6 - E7 - E8 - E10 - E11Deep Socket (6pt / mm) : 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13

Content - Others :Hex Key Set (mm) : 1.5 - 2 - 2.5Combination Wrench (mm) : 8 - 9 - 10 - 11 -12 - 13 -

14 - 15 - 16 - 17 - 19Water Pliers - 250mmLong Nose Pliers - 200mmCombination Pliers - 180mmDiagonal Cutter - 160mm

Shank Bits : 5/16"Hex : H10 - H12 - H14Philips : PH4Pozi : PZ4Spline : M5 - M6 - M8 - M10 -M12Slotted (mm) : 8 - 10 - 12Torx Tamperproof : TT45 - TT50 - TT55 - TT60

Screwdrivers :- 38mm : SL6 - PH2- 75mm : SL5 - PH1- 100mm : SL6 - PH2- 150mm : SL6- 200mm : SL8

Tool set

M0032

M0032 >Bit Set - 32 PcSee Page 110for contents

82

M1256 >1/2" Dr. Tool set - 56 Pc

M1256: 565mm(L) x 350mm(W) x 100mm(H)

Content - 1/2" Dr. :Ratchet Handle (Quick release / 72 Teeth)Universal JointExtension Bar - 5"/125mmSocket (6pt / mm) : 10 - 11 - 12 - 13 - 15 - 17 - 19 - 22 - 24 - 27Spark Plug Socket (6pt / mm) : 16 - 21

Content - others :Hex Key Set (mm) : 1.5 - 2 - 3 - 4Combination Wrench (mm) : 11 -12 - 13 - 14 - 15 - 17Water Pliers - 250mmCombination Pliers - 180mmHammer - 300g

Screwdrivers :- 40mm : SL6 - PH6- 100mm : SL6 - PH6- 200mm : PZ8

Content - 1/4" Dr. :Bit Adaptor - 1/4"/6mmSpinner Handle - 150mmSocket (6pt / mm) : 8 - 9 - 10 - 11 - 12 - 13

Bits :Philips : PH1 - PH2 - PH3Slotted (mm) : 4 - 5.5 - 7Torx Tamperproof : TT10 - TT15 - TT20 - TT30Hex : H3 - H4 - H5 - H6


Tool set

83

M0119 >1/4" & 1/2" Dr. Tool set - 119 Pc

M0119: 565mm(L) x 350mm(W) x 100mm(H)

Content - 1/2" Dr. :Ratchet Handle (Quick release / 72 Teeth)Universal JointBit Adaptor - 5/16"Extension Bar - 3"/75mmExtension Bar - 10"/250mmExtension Bar (Flexible) - 15"/375mmSocket (6pt / mm) : 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 1819 - 20 - 21 - 22 - 23 - 24 - 27 - 30 - 32E-Socket (6pt) : E10 - E11 - E12 - E14 - E16 - E18 - E20 - E22Spark Plug Socket (6pt / mm) : 16 - 21

Bits - 30mm :Slotted (mm) : 3 - 4 - 5.5 - 7Philips : PH1 - PH2 - PH3Torx Tamperproof : TT10 - TT20 - TT25 - TT27 - TT30 -

TT40 - TT45 - TT50

Bits - 75mm :Hex : H4 - H5 - H6 - H7 - H8 - H10 - H12

Content - others :Combination Wrench (mm) :6 - 7 - 8 - 9 - 10 - 12 - 13 - 1415 - 16 - 17 - 18 - 19 - 21 - 2224 - 27

Water Pliers - 250mmCombination Pliers - 180mmHammer - 300g

Screwdrivers :- 40mm : SL6 - PH6- 200mm : SL8 - PH8

Content - 1/4" Dr. :Ratchet Handle (Quick release / 72 Teeth)Spinner Handle - 150mmUniversal JointBit AdaptorExtension Bar - 2"/50mmExtension Bar - 4"/100mmExtension Bar (Flexible) - 6"/150mmSliding T-Bar - 110mmSocket (6pt / mm) : 4 - 5- 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13

Bits :Slotted (mm) : 3 - 4 - 5.5 - 7Philips : PH1 - PH2 - PH3Pozi : PZ1 - PZ2 - PZ3Torx Tamperproof : TT10 - TT15 - TT20 - TT30Hex : H3 - H4 - H5 - H6


Tool set

84

M1210 >Extension Bar set - 9 Pc

M1210: 280mm(L) x 182mm(W) x 50mm(H)

ContentExtension Bar- 50mm / 2" : 1/4" - 1/2"- 75mm / 3" : 3/8"- 100mm / 4" : 1/4" - 3/8"- 125mm / 5" : 1/2"- 225mm / 9" : 1/4" - 3/8"- 250mm / 10" : 1/2"

Material : CR-V

< M1234Adaptor set - 6 Pc

M1234: 150mm(L) x 107mm(W) x 50mm(H)

ContentAdaptor- 1/4"(M) : 3/8"(F)- 3/8"(M) : 1/4"(F) - 1/2"(F)- 1/2"(M) : 3/8"(F) - 3/4"(F)- 3/4"(M) : 1/2"(F)

Material : CR-V

M1208 >Dr. Adaptor & Universal Joint set - 8 Pc

Content :Dr. Universal Joint : 1/4" - 3/8" - 1/2"Dr. Adaptor :- 1/4" (M) : 3/8" (F)- 3/8" (M) : 1/4" (F) - 1/2" (F)- 1/2" (M) : 3/8" (F)Bit Adaptor : 1/4"

Material : CR-V

Adaptor sets

85

< M24351/4" Reversible Bit & Socket Ratchet Handle set - 35 Pc

M2435: 173mm(L) x 105mm(W) x 42mm(H)

Content - 1/4" Dr:Ratchet Handle (Double reversible / 72 Teeth)Bit Adapter - 4"Extension Bar - 4"/100mmSocket (6pt / mm) : 4 - 4.5 - 5 - 5.5 - 6 - 7 - 8 - 9 -10 - 11 - 12 - 13

Bits :Slotted (mm) : 4 - 5.5 - 6.5Philips : PH1 - PH2 - PH3Pozi : PZ1 - PZ2 - PZ3Torx Tamperproof : TT10 - TT15 - TT20 - TT25 - TT27 - TT30Hex : H3 - H4 - H5 - H6 - H8

M0034 >Star Bit Socket set - 34 Pc

Content :E-Socket :- 1/4" : E4 - E5 - E6 - E7 - E8- 3/8" : E10 - E12 - E14 - E16- 1/2" : E18 - E20Bit Socket - Torx :- 1/4" : T8 - T10 - T15 - T20 - T25 - T27 - T30- 3/8" : T40 - T45 - T47 - T50- 1/2" : T55 - T60Bit Socket - Torx Tamperproof :- 1/4" : TT10 - TT15 - TT20 - TT25 - TT27 -TT30- 3/8" : TT40 - TT45 - TT50- 1/2" : TT55

Material : CR-V

< M0043 1/4", 3/8" & 1/2" Dr. Xi-on Socket set - 43 Pc

The Xi-on Socket Set offers an improved design on the point of contact and always succeeds in those approximately 85% rounded nuts/bolts compared to conventional sockets.

Features:• Protects the nut/bolt, prevents the nut/bolt from rounding.• High performance design allows the socket to contact the nut/

bolt away from the corner while the torque can evenly spread all over the head of the nut/bolt makes the turning labor-saving.

• Extends the life of a nut/bolt.

Content :- 1/4" Dr. : 4, 4.5, 5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13 mm

- 3/8" Dr. : 8, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 24 mm

- 1/2" Dr. : 8, 10, 11, 12, 13, 14, 15, 16, 17, 19, 21, 22, 24, 27, 30, 32 mm

Socket sets

M0004 > Demo block

86

Ratchet handles >

M0142 : 1/4" Ratchet Handle - 72 TeethLength - 132mm



M0142

M0122

M0382

M0003 >Stubby Ratchet Handle set - 3 Pc M0003 : 181mm(L) x 138mm(W) x 38mm(H)

Content :Ratchet Handle - 72 Teeth (Stubby) :- 95mm : 1/4"- 115mm : 3/8"- 150mm : 1/2"

Material : CR-V

M0141 : 1/4" Ratchet Handle - 72 Teeth



M0141

M0121

M0381

Ratchet handles

87

Gear wrenches

< M7808 - M7819Reversible gear wrenches

M7580 - M7599 >Gear wrenches

M7580 : 8mm / 140mm(L) x 16.5mm(W) M7583 : 9mm / 143mm(L) x 19.0mm(W) M7584 : 10mm / 160mm(L) x 20.7mm(W) M7585 : 11mm / 168mm(L) x 22.4mm(W)M7586 : 12mm / 174mm(L) x 23.7mm(W)M7587 : 13mm / 180mm(L) x 25.7mm(W) M7588 : 14mm / 193mm(L) x 27.4mm(W) M7589 : 15mm / 200mm(L) x 28.8mm(W) M7591 : 16mm / 216mm(L) x 30.4mm(W) M7592 : 17mm / 233mm(L) x 32.3mm(W) M7593 : 18mm / 239mm(L) x 33.4mm(W) M7594 : 19mm / 250mm(L) x 34.5mm(W) M7596 : 21mm / 285mm(L) x 42.0mm(W) M7597 : 22mm / 285mm(L) x 42.0mm(W) M7598 : 24mm / 325mm(L) x 47.0mm(W) M7599 : 25mm / 325mm(L) x 47.5mm(W)

Material : CR-V

M7808 : 8mm / 135mm(L) x 17.0mm(W)M7809 : 9mm / 148mm(L) x 18.5mm(W)M7810 : 10mm / 158mm(L) x 20.0mm(W) M7811 : 11mm / 165mm(L) x 22.0mm(W) M7812 : 12mm / 172mm(L) x 23.0mm(W)M7813 : 13mm / 176mm(L) x 25.0mm(W)M7814 : 14mm / 191mm(L) x 27.0mm(W) M7815 : 15mm / 206mm(L) x 33.0mm(W) M7816 : 16mm / 208mm(L) x 30.0mm(W) M7817 : 17mm / 231mm(L) x 37.0mm(W)M7818 : 18mm / 234mm(L) x 37.0mm(W)M7819 : 19mm / 246mm(L) x 39.0mm(W)

Material : CR-V

M2402 >Reversible multi gear wrench - 2 Pc

Fits 5 different nut and bolt styles:- 6pt Hex : 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4"- 12pt Hex (mm) : 8, 10, 11, 13, 14, 16, 17, 19- External Torx : E10, E12, E14, E18, E20, E24- Spline : M10, M12, M14, M16, M18, M20, M22- Square: 5/16", 3/8", 7/16", 1/2", 9/16"

Material : CR-V

88

Gear wrench sets

M2305 >Gear Wrench set (72 Teeth) - 5 Pc

M2305: 280mm(L) x 190mm(W) x 50mm(H)

Content: Gear Wrench (72 Teeth / mm) : 8 - 10 - 13 - 17 - 19

Material : CR-V

< M23088 Pc Gear Wrench Set, 72 teeth, CR-V 6140.

M2308: 275mm x 200mm x 50mm (LxWxH)

Content: 8 - 10 - 12 - 13 - 14 - 15 - 17 - 19 mm

M2312 >12 Pc Gear Wrench Set, 72 teeth, CR-V 6140.

M2312: 295mm x 290mm x 60mm (LxWxH)

Content: 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 - 19 mm

89

Reversible gear wrench sets

< M2405Reversible Gear Wrench set (72 Teeth) - 5 Pc

M2405: 280mm(L) x 190mm(W) x 50mm(H)

Content: Gear Wrench (Reversible / 72 Teeth / mm) : 8 - 10 - 13 - 17 - 19

Material : CR-V

M2408 >Reversible Gear Wrench set (72 Teeth) - 8 Pc

M2408: 275mm(L) x 200mm(W) x 50mm(H)

Content: Gear Wrench (Reversible / 72 Teeth / mm) : 8 - 10 - 12 - 13 - 14 - 15 - 17 - 19

Material : CR-V

< M2412Reversible Gear Wrench set (72 Teeth) - 12 Pc

M2412: 295mm(L) x 290mm(W) x 60mm(H)

Content: Gear Wrench (Reversible / 72 Teeth / mm) :8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 - 19

Material : CR-V

90

Combination wrenches

< M2339Combination Wrench set - 13 Pc

Content :Combination Wrench (mm) :8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 1718 - 19 - 22

Material : CR-V

M9104 >Combination Wrench set - 4 Pc

Content :Combination Wrench (mm) : 24 - 27 - 30 - 32

Material : CR-V

91

Adjustable wrenches & Plier sets

M2560, M2562, M2563 >Adjustable Wrenches

M2560 : 8" / 200mmMaterial : CR-V



< M2502 Self adjusting multi-grip pliers - 2 Pc

• Innovative design allows the jaws to automatically adjust to any size.• Straight and V-type jaws for hex, square and round objects.

Set includes 175mm(L) & 255mm(L) pliers Jaw capacity : 40mm & 60mm

M9416 >Hose pinch off plier set - 3 Pc

Content :(L) 8 inch - 203mm(L) 10 inch - 254mm(L) 12 inch - 304mm

92

Pliers set

M9304 >Deluxe Pliers set - 4 pc

M9304: 390mm(L) x 190mm(W) x 60mm(H)

Content Water Pliers - 250mmLong Nose Pliers - 200mmCombination Pliers - 180mmDiagonal Pliers - 160mm

Material : CR-V4702011 4702012 4702013 4702014

< M9438 Hose Clamp Pliers Jaw : 0-38 mmMaterial : CR-MO

< M9455 Hose Clamp Pliers Jaw : 22-55 mmMaterial : CR-MO

M9410 >CV Boot Clamp Pliers

For easy installation of ear-type clamps on fuel

and CV joint clamps.

< M9411 CV Boot Band Cutter - L=216mm

Special design to easily cut the stainless steel clampswithout damaging the CV boot. Spring loaded action withheat treated 440 steel jaes and comfort grip handles.

93

Wire cutters

< M9402 Adjustable Wire Cutter / Stripper Tool

• Easily Cuts and strips wire 0.75 ~ 4.0 mm.• Automatically adjusts to wire size.

< M9404Multi-Purpose 4-in-1 Cutter

• Pliers in nose.• Easily cuts and strips wire Ø0.26 ~ Ø8.0 ~ mm.• TPR handles for comfortable soft grip.

M9405 >Oblique Cutter - 5"

• High quality diagonal cutter pliers designed for precision work, durable and sharp cutting edge by CNC grinding machine.

• • It is also suitable for injestion gate, electronic repair, craftwork or

jewelry making ect.• It offers user a TPR confortable soft grip and return spring action.• Use for plastic or under 2.0 mm soft material only.

< M9406Multi-Purpose 5-in-1 Cutter

• Crimps insulated terminals 1.5 - 2.5 - 6.0 mm2.• Crimps open barrel terminals & disconnectors 1.5 - 2.5 - 6.0 mm2.• Easily cuts and strips wire 0.75 - 1.0 - 1.5 - 2.5 - 4.0 - 6.0 mm2.• Cleanly shears bolts M2.6 - M3.0 - M3.5 - M4.0 - M5.0.• TPR handles for comfortable soft grip.

M9403 > 2 in 1 Plier Wire Stripper & Wire Cutter

• 3-Function wire tool with reverse switch action and build in safety lock.• Stripping Capacity : 0.8 - 1.0 - 1.3 - 1.6 - 2.0 - 2.6mm 20 - 18 - 16 - 14 - 12 - 10 AWG

94

Screwdrivers

< M9305Screwdriver set - 5 Pc

M9305: 300mm(L) x 125mm(W) x 40mm(H)

Content :Slotted (mm) : 3.5 x 75 - 5.5 x 125 - 6.5 x 150Philips : PH1 x 80 - PH2 x 100

Material : CR-V

< M9308Screwdriver set - 8 Pc

M9308: 390mm(L) x 190mm(W) x 60mm(H) Content :Slotted (mm) : 5 x75Slotted with Hex (mm) : 6 x100 - 6 x150 - 8 x200Philips : PH1 x75Philips with Hex : PH2 x100Stubby - 38mm : SL6 - PH2

Material : CR-V

M9306 >Trox Screwdriver set - 6 Pc

M9306: 300mm(L) x 165mm(W) x 40mm(H)

Content :Torx Screwdriver- 100mm : T10 - T15 - T20 - T25 - T30- 115mm : T40

Material : CR-V

95

Scewdrivers

M9393 >Long Screwdriver set - 3 Pc

M9393: 525mm(L) x 155mm(W) x 37mm(H)

Content :Philips : PH1 x 400Slotted (mm) : 4 x 400 Pozi : PZ1 x 400

Material : CR-V

< M9383Stubby Screwdriver set - 3 Pc

M9383: 113mm(L) x 115mm(W) x 37mm(H)

Content :Philips : PH2 x 38Slotted (mm) : 6.5 x 38 Pozi : PZ2 x 38

Material : CR-V

M9307 >Hexagon Screwdriver set - 7 Pc

M9307: 211mm(L) x 316mm(W) x 40mm(H)

Content :- 75 (mm) : 2.5, 3.0- 100 (mm) : 4.0, 5.0- 125 (mm) : 6.0- 150 (mm) : 8.0, 10.0

96

Torque wrenches

< M1000N

M1000N : Torque Wrench - 1" / 1000Nm

1240mm

10N, M500N:

ontents L (mm)-30Nm 285-110Nm 365-210Nm 518-500Nm 865

Lock

Unlock

Quick Lock/Unlock Function

M030N 1/4” Drive

M110N 3/8” Drive

M210N 1/2” Drive

M500N 3/4” Drive

< M2214, M2238, M2212

M2214 : Dual Way Torque Wrench - 1/4" Dr.Range - 5 - 25 NmLength - 245mm

M2238 : Dual Way Torque Wrench - 3/8" Dr.Range - 20 - 100 Nm Length - 410mm

M2212 : Dual Way Torque Wrench - 1/2" Dr.Range - 60 - 340 NmLength - 610mm

M030N, M110N, M210N, M500N >

M030N : Torque Wrench - 1/4" / 6 - 30Nm Length - 285mm




97

Torque wrenches & Ratchet handles

M1219 >

Telescopic Ratchet Handle - 1/2" Dr.M1219 : Max. Torque=750 Nm /

330-485mm (13"-19") / 48 Teeth

M7320 >

Breaker Bar - 1/2" Dr.M7320 : Length 600mm

330 - 485mm

M3424 >

Extension Telescopic Ratchet Handle - 3/4" Dr.M3424 : Max. Torque=1074 Nm / 610 - 915mm (24"-36") / 24 Teeth

M1500N >

M1500N : Torque Wrench - 1" / 1500Nm

1850mm

1170mm

98

Air impact wrenches

< M2064Ultra Compact Air Impact Wrench - 1/2" Dr.Twin Hammer, Handle ExhaustSupplied with 1/2"(f) & 3/4"(m) adaptor

Square drive - 1/2"No-Load speed - 9000 rpmMax Torque - 1356 Nm / 1000 ft-lbAir pressure - 90 PSI / 6,3 BarAir Hose (I.D.) - 10 mmAir Inlet - 1/4"Impacts per minute - 1500

M2060 >Ultra Compact Air Impact Wrench - 3/8" Dr.Twin Hammer, Handle Exhaust

Square drive - 3/8"No-Load speed - 11000 rpmMax Torque - 610 Nm / 450 ft-lbAir pressure - 90 PSI / 6.3 BarAir Consumption - 200 Liter/MinuteAir Hose (I.D.) - 10 mmAir Inlet - 1/4"Impacts per minute - 1500

< M2063Air Impact Wrench - 1/2" Dr.

Square Drive - 1/2"No-Load Speed - 8200rpmMax Torque - 1250 Nm / 922 ft-lb3 Torque Forward - Low : 245 Nm / 180 ft-lb - Medium : 650 Nm / 480 ft-lb - High : 990 Nm / 730 ft-lbAir Consumption - 245 Liter/MinuteAir Hose (I.D.) - 8 mmAir Inlet - 1/4"Weight - 2.1 kg / 4.6 lbImpacts per minute - 1500

99

Air impact wrenches

M2062 >Air Impact Wrench - 1/2" Dr.• Twin Hammer• Light Weight, Aluminum & Composite• 3 Forward Speed & 2 Reverse Speed• Maximum Torque 1356 Nm

Square Drive - 1/2"No-Load Speed - 10000rpmMax Torque - 1356 Nm / 1000 ft-lbTorque Forward - 950 Nm / 700 ft-lbTorque Reverse - 1020 Nm / 752 ft-lbAir Pressure - 90 PSI / 6.3 BarAir Consumption - 153 Liter/MinuteAir Hose (I.D.) - 10 mmAir Inlet - 1/4"Capacity - 5/8" (16mm)Impacts per minute - 1200 - 1400

< M2072Air Impact Wrench set - 15 pc

Content :M2062 includedImpact Deep Socket with Plastic Sleeve (mm) : 17 - 19 - 21Impact Deep Socket (mm) : 22 - 23 - 24Oil PotHex Key - 4mmNippleMini Oiler

100

Air impact wrenches

M2016 >Air Impact Wrench - 1" Dr.

Pinless Mechanism- Powerfull Torque OutputAdjustable Torque- 3 Forward Torque Setting- 3 Reverse Torque SettingComfortable, Ergonomic Design- Ergonomically Designed for the operator’s comfort- Long Type with 6" (15cm) Anvil

Square Drive -1"No-Load Speed - 5000 RpmMax Torque - 2712 Nm / 2000 ft-lbTorque Forward - 1742 Nm / 1285 ft-lbTorque Reverse - 1827 Nm / 1348 ft-lbAir pressure - 90 PSI / 6.3 BarAir Consumption - 255 Liter/MinuteAir Hose (I.D.) - 19 mmAir Inlet - 1/2"Impacts per min. - 5000

M2034 >Air Impact Wrench - 3/4" Dr.• Twin Hammer.• Light Weight, High Torque.• 3 Forward Speed & 3 Reverse Speed.• Maximum Torque 1630 Nm.

Square Drive - 3/4"No-Load Speed - 5500 rpmMax Torque - 1630 Nm / 1202 ft-lbTorque Forward - 1290 Nm / 951 ft-lbTorque Reverse - 1356 Nm / 1000 ft-lbAir pressure - 90 PSI / 6.3 BarAir Consumption - 195 Liter/MinuteAir Hose (I.D.) - 13 mmAir Inlet - 3/8"Impacts per min. - 800 - 1000

101

M2033 >Cordless Impact Wrench - 1/2" Dr.- With 2 batteries

Square Drive - 1/2"No-Load Speed - 1800 rpmMax Torque - 588 Nm / 430 ft-lbVoltage - 18V DCCharging time - 1 hour Auto cut-offCapacity - 1/2" (13mm)Weight - 3 kg (incl. battery 0.53kg)Impacts per minute - 2300

< M2038Mini Cordless Impact Wrench - 3/8" Dr.- With 1 battery

Square Drive - 3/8"No-Load Speed - 2000 rpmMax Torque - 240 Nm / 177 ft-lbVoltage - 18V DCCharging time - 60 ~ 70 mins Auto cut-offCapacity - 3/8" (10mm)Weight - 2 kg (incl. battery 0.53kg)Impacts per minute - 3000

M2041 >Battery

18V DC3.0 Ah Li-ion battery

Apply for : M2033, M2038

Cordless Impact wrenches

M2042 >Battery Charger

18V2.3 Ah Li-ion battery charger

Apply for : M2033, M2038

102

Impact sockets

M3322 >1/2" Impact Socket set - 3 Pc• Thin wall for sport/racing cars• Plastic cover for protection against scratching• Blow-mold case

M3322 : 148mm(L) x 132mm(W) x 450mm(H)

Content :L = 85ml (mm) : 17 - 19 - 21

Material : CR-MO

< M33141/2" Impact Socket set - 14 Pc

M3314 : 230mm(L) x 200mm(W) x 50mm(H)

Content :L = 39ml (mm) : 10 - 12 - 13 - 14 - 17 - 19 - 22 - 24L = 78ml (mm) : 17 - 19 - 21 - 22 - 24 - 27

Material : CR-MO

M3316 >3/4" Impact Socket set - 16 Pc

M3316 : 470mm(L) x 345mm(W) x 84mm(H)

Content :L = 90ml (mm) : 19 - 21 - 22 - 23 - 24 - 26 - 27

30 - 32 - 33 - 34 - 36 - 38 - 41L = 95ml (mm) : 46 - 50

Material : CR-MO

103

M3234 >Impact Adaptor set - 6 Pc

M3234 : 150mm(L) x 107mm(W) x 50mm(H)

Content :Adaptor- 1/4"(M) : 3/8"(F)- 3/8"(M) : 1/4"(F) - 1/2"(F)- 1/2"(M) : 3/8"(F) - 3/4"(F)- 3/4"(M) : 1/2"(F)

Material : CR-MO

Impact adaptor set & wheel nut tools

< M33061/2" Dr. Impact Socket set - 6 Pc

M3306 : 110mm(L) x 300mm(W) x 50mm(H)

Content :L = 88ml (mm) : MS17L = 88ml (mm) : 15 - 17 - 19 - 21 - 22

Material : CR-V & CR-MO

M1217 >1/2" Dr. Wheel Lug Socket - 1 Pc

Content :L = 88ml (mm) : MS17

Material : CR-MO

< M3211Impact socket adaptor set - 11 Pc

Content :L = 39mm : 1/4" x 1/4" - 1.4" x 3/8" 3/8" x 1/4" - 3/8" x 3/8" - 3/8" x 1/2" 1/2" x 2/8" - 1/2" x 1/2" - 1/2" x 3/4" 3/4" x 1/2" - 3/4" x 1" 1" x 3/4"

Material : CR-MO

104

Automotive clutch tools

M9737 >Self adjusting clutch (SAC) master tool kit - 38 pc

• Master tool kit for the professional disassembling & assembling of all self-adjusting clutches (SAC).• Necessary for the pre-thightening of the SAC clutch pressure plates before their removal and installation.• Prevents plate distortion which may prevent the clutch from disengaging or cause dragging.• Single piece, six arm plate has been designed for SAC clutches with 6/8 locking holes.

Content :Clamping tool with 6 arms for clutches with 6/8 locking holes.Face spanner.Compression strut.Clutch mandrel set (BMW): - 15mm x 23mm - 15mm x 28mm - 15mm x 34mm - 15mm x 26.5mm - 15mm x 32.5mm - 15mm x 32.5mm (sleeve)Clutch resetting tool.Handle for campling tool.4 x Knurled nuts for threaded bolts.Three lots of 4 x threaded bolt sets: - M6 / 1.0 screw thread - M8 / 1.25 screw thread - M7 / 1.0 screw threadCluth centering tools: - Centering handle - Handle adapter - Clamping cone (15-22mm) - Clamping cone (22-28mm) - Centering pin (12mm) - Centering pin (14mm) - Centering pin (15mm) - Centering pin (16mm) - Centering pin (17mm) - Centering pin (18mm) - Centering pin (19mm)

105

< M9706 Clutch Aligner Tool for Trucks - 6 Pc

Content :Mandrel NO. 1 (mm) : ø36 - ø45Mandrel NO. 2 (mm) : ø42 - ø52Centering Sleeve (mm) : ø20, ø25, ø27, ø30

M9711 >Clutch Aligner set - 11 pc

Content :Spigot Adaptor (mm) : ø12 - ø14 - ø15 - ø16

ø17 - ø18 - ø19 - ø20Mandrel (mm) : 15/19 - 20/26.6 - 23/36

Automotive misc tools

< M3206 Spring Compressor set

Compression length 65 - 320 mm

M9409 >Supporting Device

• The device is indispensable when removing and installingvehicle suspension leg and wheel hub assemblies.

• The device is used in conjunction with an appropriate trans-mission jack.

• The support takes place via the wheel nuts/studs ensuringpositioning of the suspension leg assembly.

106


< M3205 Mini Tube Bender set

Content :One-Hand BenderDies : 3/16"(5mm) - 1/4"(6mm) - 5/16"(8mm)

3/8"(10mm) - 1/2"(12mm)

M9703 >Tail Pipe Expander - 3 Pc

Content :Small-Capacity : 1-1/8" to 1-3/4" (29-44mm) I.DMedium-Capacity : 1-1/2" to 2-7/16" (38-62mm) I.DLarge-Capacity : 2-1/8" to 3-7/16" (54-87mm) I.D

< M3808Strut Nut Kit - 8 Pc

M9711 : 246mm(L) x 115mm(W) x 66mm(H)

Content :Internal Ø10.5 x 22mm Hex Dr. - 3.5mm PIN.Internal Ø12.5 x 22mm Hex Dr. - 3.5mm PIN.Internal Ø14.5 x 22mm Hex Dr. - 5mm PIN.Internal Ø14 x 22mm Hex Dr. - 2.5mm PIN.5mm x 60mm(L) x 1/2” Dr.5.5mm x 48mm(L) x 1/2” Dr.Internal Ø14.5 x 21mm Hex Dr. - 5mm PIN.Internal Ø12.5 external Ø15.5 - 3mm PIN.

107


M3232 >Cooling System & Radiator Cap Master Kit - 33 Pc

Content :

Extension Tube : ø9.5mm x 600mm (L)

4 Conical Bushes: - 24~53 (Ford) - 27~50.5 - ø9.5mm Connector - ø9.5mm L-Type Connector

25 Adaptors: #01 (060) Mercedes. #02 Audi (after 2000).

Opel / VW / Ford. BMW.

#05 BMW. #06 Audi / Citroen / Fiat / Peugeot.

Volvo / VW (before 2000). #08 Adjustable Stationary Seat. #09 50mm Universal Connector (Used with #08 Japanese and European Cars). #10 35mm Universal Connector (Used with #08 Japanese and European Cars). #11 50mm Universal Connector (Used with #08 Japanese and European Cars). #12 Used to link #08 with #09, #10 and #11.

For cars with the cap on the Radiator. Steel Fastener used with adaptors and seat accessories for

Toyota / Suzuki / Nissan.#15 Honda / Toyota.#16 Mitsubishi / Ford / Nissan / Mazda.

Ford.#18 Ford.#19 Mercedes.#20 Mercedes.#21 GM / Ford.#22 GM / Opel.

BMW E-60 (with Circlip). Ford Fiesta / Mondeo (after 2010) / Mazda 3 (2005) (with Circlip).

#25 Toyota Previa / RAV 4.

#11 #10 #09

#14

#23

#15 #05

#02

#04

#03

#01

#06

#07

#24 #12

#08#16

#17

#18#22

#25 #19

#20

#21 #13

108

< M3203 Universal Bearing Race and Seal Driver - 2 Pc

ø18 - 90mm

ø9.5 - 50mm

Bearing driver

109

< M3215 Transmission Oil Filling System - 15 Pc

Capacity: 7.5 Liter

Oil filling system

110

< M00321/4" Bit set - 32 Pc

ContentPhilips : PH1 - PH2 - PH3Slotted (mm) : 4 - 4.5 - 6.5Pozi : PZ1 - PZ2 - PZ3Torx : T8 - T10 - T15 - T20 - T25 - T27 - T30 - T40Torx Tamperproof : TT8 - TT10 - TT15 - TT20

TT25 - TT27 - TT30 - TT40Hex : H3 - H4 - H5 - H6 - H8Bit Holder - 6mm : 1/4" DrBit Adapter - 60mm (Quick Magnetic) : 1/4" Dr.

Bit sets

< M0060 Professional Bit set 3/8" Dr. & 1/2" Dr.- 60 Pc

M0060: 327mm(L) x 175mm(W) x 50mm(H)

Content :Bit Adaptor : 3/8" Dr. - 10mm Hex 1/2" Dr. - 10mm Hex 14mm HexImpact Adaptor : 10mm Hex (F) x 14mm Hex (M)

Material : SCM-V / CR-V / SNCM-V

Bit Lengths

Bit Size

Tx-Star

Spline

SplineTemper.

Hex.

Ribe

Square

30 mm 75 mm14 mm 10 mm 14 mm

T60 T60T20-T25-T27-T30T40-T45-T50-T55

M12 M9-M12M5-M6-M8-M10 M14M16

H12 H4-H5-H6-H7-H8H10

H14-H17 H9-H9.5H12

M12M6-M7-M8-M108mm-10mm

M0138 >1/2" Bit ratchet handle 72 teeth - 1 Pc

111

< M2008 Wheel Locking Nut Extractor set - 8 Pc

ContentSockets- Vertical Grooves / Hex=22mm : ø20 - ø22 - ø24 - ø27- Horizontal Grooves / 1/2"Dr. : ø23 - ø25Drift - 150mm : To hammer the socket on the wheel nut.Punch - 135mm : To remove the wheel nut out of the socket.

M2020 >Master Spindle Rethreading set - 20 Pc

M2020: 332mm(L) x 252mm(W) x 56mm(H)

This 20 Pc set will repair or renew damaged threads on stub axles/spindles on most vehicles. The dies are made from high tempered steel for strength and durability.

Content :Imperial sizes :- 11/16" x 24- 3/4" x 16- 3/4" x 20- 13/16" x 20- 27/32" x 20- 7/8" x 14- 1" x 14

Metric sizes :- 16 x 1.0- 16 x 1.5- 18 x 1.5- 19 x 1.5- 20 x 1.0- 20 x 1.25- 20 x 1.5

- 22 x 1.0- 22 x 1.5- 24 x 1.5- 24 x 2.0- 25 x 1.5- 27 x 2.0

Rethreading & Locking nut extractor set

M9414 > Adjustable ball joint splitter for use on cars andcommercial vehicle jaw opening 20-30mm.

112

AMP120310 AMP120315 AMP120720 AMP120725 AMP121230 AMP121235 AMP121240 AMP121550

3 ton 3 ton 7 ton 7 ton 12 ton 12 ton 12 ton 15 tonModel

Capacity

A (mm)B (mm)C (mm)

Weight (kg)

10095

1341.1

1001351761.3

1501602233.5

1551902503.6

2052403257.5

200350425

9

20051058515

22564071723

2 Leg Adjustable Puller

AMP230110 AMP230410 AMP230710 AMP230810

1 ton 4 ton 7 ton 8 ton Model

Capacity

A (mm)B (mm)

Weight (kg)

1201250.7

2102202.1

2702803.7

2703304.0

2/3 Leg Puller

AMPC230110 AMPC230410 AMPC230710

1 ton 4 ton 7 tonModel

Capacity

A (mm)B (mm)

Weight (kg)

1201250.8

2102202.1

2702806.7

2/3 Leg Puller Self-Centering

Pullers

The jaws have a special cut-out to pull

A

B

A

C

B

B

A

2 Leg Adjustable Pullers > Manual puller

• Adjustable in width.

2/3 Leg Pullers > Manual puller

• Can be used with either 2 or 3 jaws.• Extra long jaws adjustable in 4 positions.• The jaws have a special cut-out to pull.

2/3 Leg Self-Centering Pullers > Manual puller

113

A

C

B

B

R

A

B

C

Position to SplitPosition to Pull

Note: Be sure to use the correct position for the required action in order to avoid damaging the Splitter-Set.

AMP221102 AMPC221103 AMPC221110Model

A (mm)B Max. (mm)B Min. (mm)

C (mm)Weight (kg)

12011046

1221

12014046

1561.1

190195632103.4

Push Puller

Pullers & Splitters

APS1202 APS1203 APS1204Model

A Max. (mm)A Min. (mm)

B (mm)R

Weight (kg)

604

603/8"0.7

806

803/8"1.3

110101105/8"2.7

Splitters

AMP320202 AMP320303 AMP321004Model

A (mm)B (mm)C (mm)

1005590

10080

130

152108175

Splitters Set

< Push PullersManual puller

Splitters >Manual puller

< Splitter SetManual puller

114

M9506 > Pin Punch set - 6 Pc

Content :Pin Punch (mm) : 2x115, 3x125, 4x150

5x165, 6x180, 8x180

Material : 60SICRV(T61)

< M9009Ball End Hex Key set - 9 Pc

M9009: 200mm(L) x 70mm(W) x 30mm(H)

ContentBall End Hex Key : H1.5 - H2 - H2.5 - H3 - H4H5 - H6 - H8 - H10

Material : CR-V

< M9516 Punch & Chisel set - 16 Pc

Content :Pin Punch (mm) : 2x110, 3x120, 4x125, 5x135, 6x145Centre Punch (mm) : 3x125, 5x150Taper Punch (mm) : 2x135, 3x145, 4x150, 5x160, 6x170Chisel (mm) : 10x140, 13x150, 16x165, 19x175

Material : 60SICRV(T61)

Punch, chisel & Hex key sets

115

M1700 > Twist drill bits set - 170 Pc

Wrench, Twist drill bits & Oil drain plug key set

M0001 >Wrench with Bottle Opener - 8mm

M3817 >3/8" Dr. Oil Drain Plug Key set - 17 Pc

Content :Square (mm) : S8 - S9.5 - S10 - S10.5 - S11 - S12 - S13.1Hex : H8 - H9 - H10 - H12 - H13 - H14 - H17Triangle (mm) : XT10Square Hole (mm) : XS10Star (mm) : M16

Material : CR-V

116

< M5001 Tyre Bead Seater

Capacity : 20 LiterWeight : 11.8 kg / 26 lb

M9036 : 5/8" x 36" - 30º / 16 x 915mmM9048 : 7/8" x 48" - 30º / 22 x 1220mmM9056 : 1" x 56" - 30º / 25.4 x 1422mm

M9004 >Pry Bar set - 4 Pc

Content :L - 200 mm : 6.35 mmL - 300 mm : 9.50 mmL - 450 mm : 11.1 mmL - 560 mm : 12.7 mm

Heavy duty pry bar with textured handle and hammer cap

Tyre bead seater & Heavy duty pry bars

117

Dead blow hammer & Magnetic holders

M9911 >Magnetic Holder• Flexible shape.• Easy to use from vertical to horizontal surface.

< M9922Magnetic Holder• For (air) impact wrench & scokets, markers, torque wrench & other tools.• 400 mm Magnetic hook "O" + "U".

M9900 & M9901 >Magnetic Tool Strips• Magnetic on both sides for easy use on metal surface.• • Tools are not included.

M9900 : 300mmM9901 : 600mm

< M9930 Dead Blow Hammer - 4 kg, length 762mm

118

HR8000 >Induction Heater set• All packed in strong aluminum suitcase.• Included 5 accessories.

Voltage : 230V / 50-60Hz / 3 AmpPower : 1500W

Content :Induction coil (mm) : ø19 - ø20Induction cable (mm) : 600Induction coil : U-ShapeInduction pad (mm) : ø75

Induction heater

119

HRK8007 >Induction Heater Coil set - 7 Pc

Content :Induction coil (mm) : ø13 - ø19 - ø23 - ø26 - ø32 - ø38 - ø45

120

Hot stapler

HS7000 >

Hot Stapler set- All packed in strong aluminum suitcase.- Included 6 different type staples.

Voltage : 230V / 50-60Hz / 0.15 AmpPower : 40-50W

1

2

3

4

5

6

mm) Outside corner

mm) Large surface

mm) Stitch tears

mm) Large surface

mm) Inside corner

mm) Stitch tears

HSS7006M

HSS7006S

HSS7006Z

HSS7008S

HSS7008V

HSS7008Z

HS7000 Article nr.

121

Auto body repair tools

M9907 >Rubber Dolly set - 7 pc

M9907: 340mm(L) x 178mm(W) x 38mm(H)

ContentHeel DollyLong Type Heel DollyDouble End DollyCurved DollyUtility Dolly (General purpose dolly)Double End Hand DollyLong Type Curved Dolly

M9807 >Dolly & Hammer set - 7 pc• Full polished.• Drop forged steel dollies & hammers.

M9807: 340mm(L) x 178mm(W) x 38mm(H)

ContentStandard Bumping HammerPick & Finish HammerShrinking HammerUtility DollyCurved DollyHeel DollyToe Dolly

M9916 >Ball Pein Hammer - 685g

Hammer Head - 450gLength - 325mm

< M9924Ball Pein Hammer - 1 kg

Hammer Head - 680gLength - 384mm

122

M9999 >Mechanix Display Unit• Tools are not included.

M9999 : 945mm(L) x 500mm(W) x 2320mm(H)

Content :Back Pannel : 2320 x 945mmBottom Shelf : 915 x 385 x 32mmShelf : 915 x 385 x 32mmHooks : 50 x 3" - 50 x 4"

Optional :M9999-S : Shelf for display, included supports.M9999-03 : Box for 50 hooks - 3"M9999-04 : Box for 50 hooks - 4"

Mechanix display unit

123

124

Acc

esso

irie

s

125

Index

Jump starters & Battery charger Page 126 - 128

Work mat Page 129

Creepers Page 130

Creepers & Roller seats Page 131

Automatic tyre inflators Page 132 - 133

Industrial diesel heaters Page 134

Gas Forced heaters / LPG Page 135

LED work light Page 136

Work lights & cable reel Page 137

Oil drain pans & Recycling reservoirs Page 138

Mini air guns & Air compressor Page 139

Hand winch, Cable & Power puller Page 140

Electric winch Page 141

Spare parts Page 142 - 147

Index Page 148 - 149

126

Jump starter

IJS6000 >Intelligent Jump Start and Mobile Device Charger.

IJS6000• Start current: 300A. • Peak current: 600A.• Will start a 12V gasoline engine (up to 5 liter) with internal-

voltage of just 0.05V in a car battery.

IJS6000D• Start Current: 350A. • Peak Current: 700A.• Will start a 12V gasoline engine (up to 5.0 liter) and diesel

cars (up to 2.0 liter engine) with internal voltage of just 0.06V in a car battery.

• Output 1: 5V/2A. • Output 2: 12V Jump Starter.• Input: 5V/2A. • Battery capacity: 6000mAh/22.2wh.• Operating temperature: -20 °C ~ 60 °C.• The world’s slimmest ‘pocket’ jump start at this power level.• High end and high capacity internal lithium-polymer battery.• Re-charge from a laptop computer or 5V USB mains charger

plug (not supplied).• ‘SMART’ jump start cables with thickened copper core.• 3 in 1 mobile charging cables for smartphone and tablets.• 0.5W LED torch and SOS signal.• Safe and reliable technology.• Excess demand failsafe cut-out to protect unit and car.• Microcomputer control circuitry.• Reverse polarity protection.• Output short circuit protection.• Excessive voltage protection.• Excessive current protection.• No electrical spiking.• Size: 130mm x 67mm x 15mm.• Weight: 170g.• Neoprene carry case included.

Scan me for demonstration video

127

Jump starter

IJS11000 >Intelligent Jump Start and Mobile Device Charger.

• Start current: 400A. • Peak current: 800A.• Will start all 12V vehicles with internal voltage of

just 0.06V in a car battery.

• Output 1: 5V/2A. • Output 2: 12V Jump Starter.• Input: 15V/1A. • Battery capacity: 11000mAh/41wh.• Operating temperature: -20 °C ~ 60 °C.• The world’s slimmest ‘pocket’ jump start at this power level.• High end and high capacity internal lithium-polymer battery.• ‘SMART’ jump start cables with thickened copper core.• 3 in 1 mobile charging cables for smartphone and tablets.• 0.5W LED torch and SOS signal.• Safe and reliable technology.• Excess demand failsafe cut-out to protect unit and car.• Microcomputer control circuitry.• Reverse polarity protection.• Output short circuit protection.• Excessive voltage protection.• Excessive current protection.• No electrical spiking.• Size: 174mm x 75mm x 29mm.• Weight: 390g.• Neoprene carry case included.

128

Safety functions:• Reverse polarity protection.• Spark-proof when clips touch each other.• Short-circuit and over-charge protection.• Desulfating battery plates to extend battery lifetime and

increases ability of taking charge.• User friendly "connect & standby" operation for DC cable.• Battery maintenance/reconditioning function

• Reinforced activation function.• Battery tester for quick battery trouble shooting.• Auto wake-up function (Stage 4).• 4-Stage pulse charging.• Multiple battery charge function.• Charging rate: 2/10/20/30/40Amp.

I-7015 >Fully automatic battery charger for 12 Volt batteries

• Designed to increase battery performance and life. ACDelcoTM Charger provides battery maintenance function that may help to recondition a battery.

• Fully automatic "pulse cycle" charging.

• Charges most lead acid battery types. The ACDelcoTM Charger will charge most types of lead acid batteries plus Gell, AGM, Marine type, etc.

• The charger wakes up automatically to ‘top off’ battery when needed.

Jump starter & Battery charger

IJS8000 >Intelligent Jump Start and Mobile Device Charger

IJS8000• Start current: 370A. • Peak current: 750A.• Will start a 12V gasoline engine (up to 5 liter) with internalvoltage of just 0.05V in a car battery.• Output 1: 5V/2A. • Output 2: 12V Jump Starter.• Input: 5V/2A. • Battery capacity: 8000mAh/22.2wh.• Operating temperature: -20 °C ~ 60 °C.• The world’s slimmest ‘pocket’ jump start at this power level.• High end and high capacity internal lithium-polymer battery.• Re-charge from a laptop computer or 5V USB mains charger plug

(not supplied).• ‘SMART’ jump start cables with thickened copper core.• 3 in 1 mobile charging cables for smartphone and tablets.• 0.5W LED torch and SOS signal.• Safe and reliable technology.• Excess demand failsafe cut-out to protect unit and car.• Microcomputer control circuitry.• Reverse polarity protection.• Output short circuit protection.• Excessive voltage protection.• Excessive current protection.

• No electrical spiking.• Size: 138mm x 76mm x 23mm.• Weight: 300g.• Neoprene carry case included.

129

C-9802 > 2 fold EVA kneel pad Size: 450 x 210 x 30mm

C-9803 >3 fold EVA work mat Size: 1210 x 420 x 30mm

< C-9806

6 fold EVA work matSize: 1210 x 420 x 30mm

Work mat

130

CP4031 >Bone-ster

Size: 1092 x 594mmThe Bone-ster double-ribbed one-piece body gives an incre-dible 182 kg capacity. The Bone-ster features strong, custom molded 7,6 cm diameter wheels with molded in place 2,25 cm wide tyres.

< CP6031The Bone Size: 1194 x 648mm

The Bone has custom-molded 13 cm diameter wheels. With 2,5 cm wide tyres. The heavy American made steel caster frames have dual-race ADJUSTABLE ball bearing swivels and are thrubolted to the creeper body. The original Bone creeper sets the standard for the highest quality, best working creeper ever made that supports users up to 136 kg less than 4,5 cm off the ground.

< CP5031The Tail BoneSize: 806 x 711 x 584mm

The Tail Bone is designed to be easier to use, more comfortable, more durable and a better value than any other mechanic's stool on the market. The extra wide (81,3 cm) uniquely designed tripod base, a naturally stable working platform, even on uneven surfaces. The entire stool swivels with your body. The Tail Bone cruises around at a low 30,5 cm off the ground, making it the perfect height for any job that requires you to get low! The Tail Bone has wide (2,5 cm) custom-molded, 13 cm diameter wheels. Capacity 159 kg.

Creepers

CP7031 >The Rough RiderSize: 1194 x 648mm

3,5 cm wide tyres for outdoor use. It also has ground clearance of 7,3 cm.

Custom-Molded Wheels

131

C-9836 >102cm (40") Professional PVC Creeper

• Six Ø 7.5cm PVC castors.• Storage compartments for tools, bolts/nuts.• Incorporated grip.• Molded to body shape for extra comfort.

CP-9605 >120cm (47") Professional Creeper

• Converts easily from creeper to seat or from seat to creeper.

• Finger safe and friendly (un-)lockingsystem.• Soft vinyl padded.• Heavy Duty Metal Frame.• Six Ø 6cm swivel castors for smooth operation.• Creeper 120cm / Seat 48cm high.

< RS-9833Pneumatic roller seat with one tray.

• Seat Ø 31cm.• Seat adjustable in height from 38-51cm.• Convenient tool tray allows you to keep what you need

within arms reach.• Extra 360° rotating tool tray for added storage space

for tools, bolts/nuts.•

360°

Creepers & Roller seats

132

TI-10711 >Max inlet air supply:10 BAR / 1000 kPa

Operating pressure:Min: 0.3 BAR / 35 kPaMax: 7.0 BAR / 700 kPa

Includes:1x controle unit.

Silencer.

Automatic tyre inflators

The Omega Mechanix ATI has special features that not only saves labor and improves the safety of your

This device is one of the safest of its kind. The OPS (Over Pressure System) is an extra feature that

pressure will go down automatically to the preset pressure.

Scan me for demonstration video

< TI-10721 / TI-11221TI-10721Max inlet air supply:10 BAR / 1000 kPa



Emergency switch equipped with 8m cable + HAN4 = 5 pin connector.Door switch equipped with 2m cable + HAN3 = 4 pin connector.Silencer.

TI-11221Max inlet air supply:15 BAR / 1500 kPa


133

TI-00001 >• Tyre chuck.• Screw in the core valve with the tyre chuck.• No air loss / no pressure loss.• Easy and safe.

TI-00003 >• Tyre chuck with silencer. • 25% noise reduction.

Door switchTI-10721 - TI-11221 - TI-11224

Emergency switchTI-10721 - TI-11221 - TI-11224

TI-11224Max inlet air supply:15 BAR / 1500 kPa

Operating pressure:Min: 0.3 BAR / 35 kPaMax: 12.0 BAR / 1200 kPa4 outlets


Emergency switch equipped with 8m cable + HAN4 = 5 pin connector.Door switch equipped with 2m cable + HAN3 = 4 pin connector.Silencer.

Automatic tyre inflators

134

Industrial diesel heaters

< HRD70Heating output 70,000 BTUs ( 20.52 KW)Fuel consumption: 1.7 kg/h (Tank 24 L)Air output: 600 m3/h

HRD100 >Heating output 100,000 BTUs ( 29.31 KW)Fuel consumption: 2.5 kg/h (tank 24 L)Air output: 720 m3/h

• Mobile air heater. • Operate on diesel oil or kerosene.• Stainless steel combustion chamber with fan cooling.• • When out of oil, heater will cut off the power.• Fixed oil display.• Cut-off protection, re-plugged in will not work automatically.• Low pressure atomization, combustion completely.• Waterproof class IPX4.

135

Gas Forced heaters / LPG

< HRP42 Heating output 42,000 BTUs (12.31 KW) Fuel consumption: 0.74 kg/h Air output: 320 m3/h

HRP100 >Heating output 100,000 BTUs (29.31 KW)Fuel consumption: 2.18 kg/hAir output: 650 m3/h

• Portable air heater. • Operate on propane gas (LPG). • With over-heating protection. • Special nozzle, with strong oxygen supply make combustion complete. • Cut-off protection avoid gas leaking. • • Ideal for construction sites, utility/farm buildings, sports events, barns and factories.• Ignition: piezo. • 1.5m hose included.

136

LED work light

< PL-1001Rechargeable Pocket Light - SMD LED, with Magnet

• LED: 24 SMD LED, On / Off Switch with full bright, half bright light.

• Luminous Flux: 240 LM for full-bright, 120 LM for half bright.

• Battery: 3.7V, 1100mAh Lithium-Polymer battery.• Operating time: 1.5 hours for full-bright, 3 hours for

half-bright.• Charging time: 2-2.5 hours.• Protection: Overcharge, overdischarge and

auto shut off function.

OrangePL-1001/O

BlackPL-1001/B

GreenPL-1001/G

60° 60°PL-1007 >Rechargeable stripe LED Worklight

• Stripe LED.• Magnetic Base.• Provides a beam of 40 - 50 LM.• 3,6V Li-ion Battery.• Adjustable in many positions.• Charging time: Approximately 1.5 Hours.• Operating time: Approximately 3.5 Hours.

< PL-2300USB Rechargeable Multifunctional Worklight

• Comes with COB LED and UV LED.• Has a function for Low-High-UV LED.• Magnetic Base and Hook.• Provides a beam of 230 LM.• USB Recharge with a 3,7V Li-ion Battery.• Adjustable in many positions.• Charging time: Approximately 3.5 Hours.• Operating time: Approximately 3 Hours.

USB Recharge

137

LED work light & cable reel

< PL-1016LED hand lamp

• 3W COB LED hand lamp.• Provides a wide angle beam of 205 LM.• Battery: 3.7V Li-ion 2200mAh 8.14Wh.• Operating time: 3-3.5 hours.• Charging time: 4.5-5.5 hours.• The light can be charged in the charging base as

well as directly with the adaptor.• 360° swivel hanging hook / belt clip incl. magnet.

PL-1200C >Cable Reel

• Plug & Socket.• Input Cable: 1M, 3x1.5mm2.• Output Cable: 12M, 3x1.5mm2.• Voltage: AC230V 50Hz.• Maximum Load: - Coiled up 900W. - Unwound 2300W.

PL-530 >30 Watt T8 Engine Work Light Fluorescent Lamp

• Adjustable mounting clamps 1,15 – 1.80 meter.• Aluminum Frame with metal end covered by EVA.• End of light and hook are PP.• Provides 400 - 500 LM.• 5 meter cable.• 230V-50Hz, VDE Plug.•

PL-514 >13 Watt, Transistorised AC Double Fluorescent TL Work Light

• 230 Volt AC, 50Hz.• Hanging Hook.• 2 Magnetic Holders.• 5 Meter Cable.• On/Off Switch with Cover.• Water Resistant (IP44).

Magnetic Holders Included

138

Oil drain pans & recycling reservoirs

^ PO-08Oil drain pan Capacity: 8 LiterSize: 500 x 400 x 125mm Approximate (inner) diameter: 345mm

• High density polyethylene.• Large handles and integraded pouring spout.• Handles for left and right handed use.• Multi functional (oil / antifreeze / other liquids).

PO-16 >Oil drain panCapacity: 16 LiterSize: 570 x 470 x 150mmApproximate (inner) diameter: 410mm

• High density polyethylene.• Large handles and integraded pouring spout.• Handles for left and right handed use.• Multi functional (oil / antifreeze / other liquids).

< PO-10Oil recycling reservoirCapacity: 10 LiterSize: 567 x 321 x 126mm

• Double Function: Oil drain pan & recycling reservoir.• Large handles for left and right handed use.• Multi functional (oil / antifreeze / other liquids).

PO-44 >Oil recycling reservoir with wheelsCapacity: 44 LiterSize: 885 x 495 x 188mm

• Double function: Oil drain pan & recycling reservoir.• Large handles for left and right handed use.• Wheels for easy and light handling.• Multi functional (oil / antifreeze / other liquids).• Small holes under the drain cap to prevent small

parts from falling into the reservoir.

139

Mini air guns & Air compressor

PA-01 >Mini air blow gun

• Nozzle with safety tip.• • Body material: Nylon.• Nozzle material: Brass.• Working pressure: 90 PSI (0.6 MPa).• Sound level: 70 dBA.• Air consumption (90 PSI/6.2 BAR): 164 Liter/Minute.• Temperature range: - 20°C ~ 70°C.• Air inlet: 1. Thread type: 1/4"NPT or 1/4"PT. 2. Plug material: Steel.

< PA-02Mini Air Blow Gun with Turbo Tip.

• The turbo-tip creates a stronger air output.• Body material: Nylon.• Nozzle material: Brass.• Working pressure: 90 PSI (0.6 MPa).• Sound level: 83 dBA (W/O Turbo Tip: 75 dBA).• Air consumption (90 PSI/6.2 BAR): 381 Liter/Minute.• Temperature range: - 20°C ~ 70°C.• Air inlet: 1. Thread type: 1/4"NPT or 1/4"PT. 2. Plug material: Steel.

W2001 >High Flow Air Compressor.

• Pressure Max. 7 BAR (100 PSI).• Liter/Minute.• Large and powerful motor to provide robust

performance.• Supply cord with alligator clips.• Build-in pressure gauge.• Build-in amber color warning light.• ON/OFF switch for compressor and warning light.• Sturdy housing for rough usage.•

needle adaptor for sport balls.• Air hose with V8 connector.• Plug with 15A fuse for protection.• Alligator cable assembly with lighter socket.• Connect direct to the car battery.

M1401 >1/4" PT Air blow gun with quiet safety nozzle

140

Hand winch, Cable & Power puller

2119086, 2119087, 2119089 >2119089: 2000 kg Handwinch with Handbrake2119086: (not shown) 960 kg Handwinch2119087: (not shown) 1500 kg Handwinch

• Solid Gear Construction.•

resistance to corrosion and weather condition.• Internally lubricated drum and pinion gear bushings.• Precise gear tooth engagement.• Smoothly rotating handle.• Reinforcement in frame for added strength.

2119086 2119087 2119089 Max. pulling capacity 960 kg 1500 kg 2000 kgWorking capacity 320 kg 500 kg 650 kg Gear ratio 4:1 4:1 5:1/12:1Solid gear construction

Precise gear tooth engagement Gear 1 gear, 2 way, 2 gear, 2 way, 1 gear, 2 way, 1 speed design 1 speed design 2 speed designPackage 1 set/color box 1 set/color box 1 set/color box

< 211908810m wire cable

• Nominal Breaking Load: 1,905kg.• Galvanized Aircraft Cable with one forged hook.• Package: 1 Pc / plastic bag.• Diameter 5mm.• Cable Length 10m.

2119077, 2119080 >2119077: 4000 kg Double gear hand power puller2119080: 2000 kg Double gear hand power puller

• One piece body frame construction chrome/zinc plated and polished to resist rust.

• Drop forged hanging bracket swivel 360° for all positions.• Drop forged steel hook with spring safety latch.• Easy to reach cable release works one notch at a time for maximum safety.• Heavy polished steel ratchet arm for smooth non-binding operation.• Heavy-Duty stamped steel provides added strength in ratchet wheel,

drive pawl and stop pawl.• Heat treated heavy-duty bolts in handle & body.• Heavy-Duty galvanized aircraft cable.• Heavy-Duty metal safety shield.

141

Electric winch

U0705 >Electric WinchRolling Load Capacity 5000 kg (double line) / 3000 kg (single line)

Rated Single PullFirst Layer 560 kgHalf Spool 410 kgFull Spool 230 kgSingle Line SpeedFull load - 35cm/minNo load - 85cm/min

FEATURES:• Wide outdoor applications - Boat launching, lawn and garden work or

vehicle emergency use.• Capable of handling rolling loads up to a capacity of 3.000 kg. Maximum

rolling loads of 500 kg at 45° upward.• Mechanical self-brake system automatically brings winch to a standstill

when winch is set off.•

sustaining rated load.• Standby emergency hand crank equipped for use on low battery occasion.• Optional pulley block available for handling rolling load up to 5.000 kg.• Cable length 13m.

142

Spare parts

M0003 Page 86

1/4" Stubby Ratchet / 72T / 95mm



DR14-HDRQ-72T95L

DR38-HDRQ-72T115L

DR12-HDRQ-72T150L

Description Article Number

M030N, M110N, M210N,

M500N, M1000N, M1500N

Repair kit for M030N (MOT)

Repair kit for M030N (NTP)

Repair kit for M110N (MOT)

Repair kit for M210N (MOT) type

Repair kit for M210N (NTP) type

Repair kit for M500N (NTP)

Repair kit for M1000N/M1500N (NTP)

M030N-RPK-MOT

M030N-RPK-NTP

M110N-RPK-MOT

M210N-RPK-MOT

M210N-RPK-NTP

M500N-RPK-NTP

M1000N-RPK-NTP


N, M500N:

nts L (mm)Nm 285

Nm 365Nm 518

0Nm 865

Lock

Unlock

Quick Lock/Unlock Function

M030N 1/4” Drive

M110N 3/8” Drive

M210N 1/2” Drive

M500N 3/4” Drive

Page 96

97

M0060 Page 110

Bit Adapter for M0060 - 1/2"x10mmx36L



Impact Adapter for M0060 -

10x14mmx43L

Bit for M0060 - 14mmxH14x30L/Hex

Bit for M0060 - 14mmxH17x30L/Hex

Bit for M0060 - 14mmxM12x75L/Ribe

Bit for M0060 - 14mmxM14x75L/Spline

Bit for M0060 - 14mmxM16x75L/Spline

Tamperproof

Bit for M0060 - 3/8"x10mmx75L/Square

Bit for M0060 - 3/8"x3/8"x75L/Hex

Bit for M0060 - 3/8"x8mmx75L/Square

Bit for M0060 - 3/8"xH10x30L/Hex















Bit for M0060 - 3/8"xM10x30L/Spline

Bit for M0060 - 3/8"xM10x75L/Ribe














Bit for M0060 - 3/8"xT20x30L/Torx











M0060 Page 110

DR12-ADBI-6P1036L

DR12-ADBI-6P1438L

DR38-ADBI-6P1029L

NT38-ADBI-6P1443LIMP

BT916-BITS-H1430LCRV

BT916-BITS-H1730LCRV

BT916-BITS-R1275LCRV

BT916-BITS-SP1475LCRV


BT38-BITS-SQ1075LCRV

BT38-BITS-38BT75LCRV

BT38-BITS-SQ0875LCRV

BT38-BITS-H1030LCRV

BT38-BITS-H1075LCRV

BT38-BITS-H1230LCRV

BT38-BITS-H1275LCRV

BT38-BITS-H0430LCRV

BT38-BITS-H0475LCRV

BT38-BITS-H0530LCRV

BT38-BITS-H0575LCRV

BT38-BITS-H0630LCRV

BT38-BITS-H0675LCRV

BT38-BITS-H0730LCRV

BT38-BITS-H0775LCRV

BT38-BITS-H0830LCRV

BT38-BITS-H0875LCRV

BT38-BITS-H0975LCRV


BT38-BITS-R1075LCRV







BT38-BITS-R0675LCRV


BT38-BITS-R0775LCRV


BT38-BITS-R0875LCRV



BT38-BITS-T2030LCRV

BT38-BITS-T2075LCRV

BT38-BITS-T2530LCRV

BT38-BITS-T2575LCRV

BT38-BITS-T2730LCRV

BT38-BITS-T2775LCRV

BT38-BITS-T3030LCRV

BT38-BITS-T3075LCRV

BT38-BITS-T4030LCRV

BT38-BITS-T4075LCRV

BT38-BITS-T4530LCRV

BT38-BITS-T4575LCRV

BT38-BITS-T5030LCRV

BT38-BITS-T5075LCRV

BT38-BITS-T5530LCRV

BT38-BITS-T5575LCRV

BT38-BITS-T6030LCRV

BT38-BITS-T6075LCRV

M0060-BMC










Blow Mold Case for M0060

M1210 Page 84

1/2" Dr. Extension Bar/Wobble -

5"/125mm


10"/250mm


2"/50mm


4"/100mm


9"/225mm


2"/50mm


6"/150mm


9"/225mm


3"/75mm

DR12-BARE-125LW

DR12-BARE-250LW

DR12-BARE-50LW

DR14-BARE-100LW

DR14-BARE-225LW

DR14-BARE-50LW

DR38-BARE-150LW

DR38-BARE-225LW

DR38-BARE-75LW


143

Spare parts

M1297 Page 77

1/2" Dr. Shank Bit Adapter 5/16"

3-way Adapter - 3/8"F x 1/2"M

3-way Adapter - 3/8"F x 1/4"M

1/2" Dr. Extension Bar - 5"/125mm




1/4" Bit Socket - Hex/3mm





1/4" Bit Socket - Philips/#1


1/4" Bit Socket - Pozi/#1


1/4" Bit Socket - Slotted/4mm

1/4" Bit Socket - Slotted/5.5mm


1/4" Bit Socket - Torx Tamperproof/T10







5/16" Shank Bit - Hex/10mm



5/16" Shank Bit - Philips/#3

5/16" Shank Bit - Philips/#4

5/16" Shank Bit - Pozi/#3

5/16" Shank Bit - Pozi/#4

5/16" Shank Bit - Slotted/8mm



5/16" Shank Bit - Torx Tamperproof/T40



1/2" Dr. Ratchet Handle - 72 Teeth/

Quick Release


Quick Release

1/4" Dr. Spinner Handle - 150mm

1/2" Dr. Universal Joint

1/4" Dr. Universal joint

1/2" Dr. Deep Socket - 14mm/6P




1/2" Dr. E-Socket - E12/6P





M1297 Page 77


1/2" Dr. Socket - 10mm/6P

















1/2" Dr. Spark Plug Socket - 16mm/6P










1/" Dr. E-Socket - E6/6P






1/4" Dr. Socket - 4.5mm/6P











DR12-SCKE-6P2078LCRV

DR12-SCKT-6P1038LCRV

















DR12-SCSP-6P1265LCRV


DR14-SCKD-6P0650LCRV














DR14-SCKT-6P04H25L-

CRV


DR14-SCKT-6P05H25L-

CRV










DR12-ADBI-516BT38L

DR38-AD3W-12M44L

DR38-AD3W-14M28L

DR12-BARE-125L

DR12-BARE-250L

DR14-BARE-150L

DR14-BARE-50L

DR14-BISK-H0337L

DR14-BISK-H0437L

DR14-BISK-H0537L

DR14-BISK-H0637L

DR14-BISK-H0837L

DR14-BISK-PH0137L

DR14-BISK-PH0237L

DR14-BISK-PZ0137L

DR14-BISK-PZ0237L

DR14-BISK-S0437L

DR14-BISK-S05H37L

DR14-BISK-S06H37L

DR14-BISK-TT1037L

DR14-BISK-TT1537L

DR14-BISK-TT2037L

DR14-BISK-TT2537L

DR14-BISK-TT2737L

DR14-BISK-TT3037

DR14-BISK-TT4037L

BT516-BITS-H1030LSHK



BT516-BITS-PH0330LSHK

BT516-BITS-PH0430LSHK

BT516-BITS-PZ0330LSHK

BT516-BITS-PZ0430LSHK

BT516-BITS-S0830LSHK



BT516-BITS-TT4030LSHK



M0137, M0120,

M0121

M0135, M0140,

M0141

DR14-HDSP-150L

DR12-JTUN-72L

DR14-JTUN-37L









M1228 Page 78

3-way Adapter - 3/8"Fx1/2"M



1/2" Dr. Ratchet Handle - 72Teeth/

Quick Release

























DR38-AD3W-12M44L

DR12-BARE-125L

DR12-BARE-250L

M0137, M0120,

M0121

DR12-JTUN-72L

























M1234 Page 84

Socket Adapter 1/2"F-3/4"M for M1234






DR12-ADSK-34DRCRV

DR34-ADSK-12DRCRV

DR12-ADSK-38DRCRV

DR14-ADSK-38DRCRV

DR38-ADSK-14DRCRV

DR38-ADSK-12DRCRV


144

Spare parts

M1395 Page 76

3-Way Adapter - 1/2"F x 3/8"M

1/4" Dr. Bit Adapter - 1/4"/25L





























1/4" Bit - Hex/3mm

1/4" Bit - Hex/4mm

1/4" Bit - Hex/5mm

1/4" Bit - Hex/6mm

1/4" Bit - Philips/#1


1/4" Bit - Pozi/#1

1/4" Bit - Pozi/#2

1/4" Bit - Slotted/4mm

1/4" Bit - Slotted/5.5mm

1/4" Bit - Torx Tamperproof/T10







Quick Release


Quick Release






DR12-AD3W-38M40L

DR14-ADBI-14BT25L

DR38-AD3W-14M28L

DR14-BARE-150L

DR14-BARE-50L

DR38-BARE-150L

DR38-BARE-75L

DR38-BISK-H0348L

DR38-BISK-H0448L

DR38-BISK-H0548L

DR38-BISK-H0648L

DR38-BISK-H0748L

DR38-BISK-H0848L

DR38-BISK-H1048L

DR38-BISK-PH0148L

DR38-BISK-PH0248L

DR38-BISK-PH0348L

DR38-BISK-PZ0148L

DR38-BISK-PZ0248L

DR38-BISK-S05H48L

DR38-BISK-S06H48L

DR38-BISK-TT1048L

DR38-BISK-TT1548L

DR38-BISK-TT2048L

DR38-BISK-TT2548L

DR38-BISK-TT3048L

DR38-BISK-TT4048L

DR38-BISK-TT4548L

DR38-BISK-TT5048L

DR38-BISK-TT5548L

BT14-BITS-H0330L

BT14-BITS-H0430L

BT14-BITS-H0530L

BT14-BITS-H0630L

BT14-BITS-PH0130L

BT14-BITS-PH0230L

BT14-BITS-PZ0130L

BT14-BITS-PZ0230L

BT14-BITS-S0430L

BT14-BITS-S05H30L

BT14-BITS-TT1030L

BT14-BITS-TT1530L

BT14-BITS-TT2030L

BT14-BITS-TT2530L

BT14-BITS-TT2730L

BT14-BITS-TT3030L

M0135, M0140,

M0141

M0136, M0380,

M0381

DR14-HDSP-150L

DR14-JTUN-37L

DR38-JTUN-58L


M1395 Page 76










































3/8" Dr. Spark Plug Socket - 16mm










DR14-SCKT-6P04H25L-

CRV


DR14-SCKT-6P05H25L-

CRV









DR38-SCKD-6P1062L

DR38-SCKD-6P1262L

DR38-SCKD-6P1362L

DR38-SCKD-6P1562L

DR38-SCKD-6P1762L

DR38-SCKT-6P0628L

DR38-SCKT-6P0728L

DR38-SCKT-6P0828L

DR38-SCKT-6P0928L

DR38-SCKT-6P1028L

DR38-SCKT-6P1128L

DR38-SCKT-6P1228L

DR38-SCKT-6P1328L

DR38-SCKT-6P1428L

DR38-SCKT-6P1528L

DR38-SCKT-6P1628L

DR38-SCKT-6P1730L

DR38-SCKT-6P1830L

DR38-SCKT-6P1930L

DR38-SCKT-6P2030L

DR38-SCKT-6P2130L

DR38-SCKT-6P2230L

DR38-SCSP-6P1665L

DR38-SCSP-6P2165L


M1443 Page 74

1/4" Dr. Bit Adapter - 1/4"/25L




1/4" Bit - Hex/3mm

1/4" Bit - Hex/4mm

1/4" Bit - Hex/5mm

1/4" Bit - Hex/6mm



1/4" Bit - Pozi/#1

1/4" Bit - Pozi/#2










Quick Release























DR14-ADBI-14BT25L

DR38-AD3W-14M28L

DR14-BARE-150L

DR14-BARE-50L

BT14-BITS-H0330L

BT14-BITS-H0430L

BT14-BITS-H0530L

BT14-BITS-H0630L

BT14-BITS-PH0130L

BT14-BITS-PH0230L

BT14-BITS-PZ0130L

BT14-BITS-PZ0230L

BT14-BITS-S0430L

BT14-BITS-S05H30L

BT14-BITS-TT1030L

BT14-BITS-TT1530L

BT14-BITS-TT2030L

BT14-BITS-TT2530L

BT14-BITS-TT2730L

BT14-BITS-TT3030L

M0135, M0140,

M0141

DR14-HDSP-150L

DR14-JTUN-37L










DR14-SCKT-6P04H25L-

CRV


DR14-SCKT-6P05H25L-

CRV










145

Spare parts

M2435 Page 85

1/4" Dr. Socket - 4mm/6P/CR-V Matted

1/4"Dr. Socket - 4.5mm/6P/CR-V Matted


1/4"Dr. Socket - 5.5mm/6P/CR-V Matted












1/4" Bit - Pozi/#1

1/4" Bit - Pozi/#2

1/4" Bit - Pozi/#3




1/4" Bit - Trox Tamperproof/T10






1/4" Bit - Hex/3mm

1/4" Bit - Hex/4mm

1/4" Bit - Hex/5mm

1/4" Bit - Hex/6mm

1/4" Bit - Hex/8mm

1/4" Dr. Ratchet Handle - Reversible/

Quick Release - 72 Teeth/Double Dr.&Bit

1/4" Dr. Adapter - 1/4"Bit/CR-V Matted

1/4" Dr. Extension Bar - 4"/100mm/

CM-V Matted

DR14-SCKT-6P0425LVM

DR14-SCKT-6P04H25LVM

DR14-SCKT-6P0525LVM

DR14-SCKT-6P05H25LVM

DR14-SCKT-6P0625LVM

DR14-SCKT-6P0725LVM

DR14-SCKT-6P0825LVM

DR14-SCKT-6P0925LVM

DR14-SCKT-6P1025LVM

DR14-SCKT-6P1125L-VM

DR14-SCKT-6P1225LVM

DR14-SCKT-6P1325LVM

BT14-BITS-PH0125L

BT14-BITS-PH0225L

BT14-BITS-PH0325L

BT14-BITS-PZ0125L

BT14-BITS-PZ0225L

BT14-BITS-PZ0325L

BT14-BITS-S0425L

BT14-BITS-S05H25L

BT14-BITS-S06H25L

BT14-BITS-TT1025L

BT14-BITS-TT1525L

BT14-BITS-TT2025L

BT14-BITS-TT2525L

BT14-BITS-TT2725L

BT14-BITS-TT3025L

BT14-BITS-H0325L

BT14-BITS-H0425L

BT14-BITS-H0525L

BT14-BITS-H0625L

BT14-BITS-H0825L

DR14-HDRQ-72T14BT

DR14-ADBI-14BTVM

DR14-BARE-100LVM


M3316 Page 102

3/4" Dr. Impact Socket - 19mm/38x90
















DR34-SCKI-1990L

DR34-SCKI-2095L

DR34-SCKI-2190L

DR34-SCKI-2290L

DR34-SCKI-2390L

DR34-SCKI-2490L

DR34-SCKI-2690L

DR34-SCKI-2790L

DR34-SCKI-3090L

DR34-SCKI-3290L

DR34-SCKI-3390L

DR34-SCKI-3490L

DR34-SCKI-3690L

DR34-SCKI-3890L

DR34-SCKI-4190L

DR34-SCKI-4695L


M3314 Page 102

1/2" Dr. Impact socket -

10mm/18x39/CR-MO


12mm/20x39/CR-MO


13mm/21x39/CR-MO


14mm/22x39/CR-MO


17mm/26x39/CR-MO


17mm/26x78/CR-MO


19mm/28x39/CR-MO


19mm/28x78/CR-MO


21mm/30x78/CR-MO


22mm/32x39/CR-MO


22mm/32x78/CR-MO


24mm/34x39/CR-MO


24mm/34x78/CR-MO


27mm/38x78/CR-MO

DR12-SCKI-1039L

DR12-SCKI-1239L

DR12-SCKI-1339L

DR12-SCKI-1439L

DR12-SCKI-1739L

DR12-SCKI-1778L

DR12-SCKI-1939L

DR12-SCKI-1978L

DR12-SCKI-2178L

DR12-SCKI-2239L

DR12-SCKI-2278L

DR12-SCKI-2439L

DR12-SCKI-2478L

DR12-SCKI-2778L


M2008 Page 111

Teeth Socket 24.5mm(C) for M2008

Installation Bar (12.5x21/150) for M2008

Removal Bar (12.5x62.5/135) for M2008

Thread Socket P2.5L/22.5-25.7mm(A)

for M2008

Thread Socket P2.5L/19.45-21.8mm(B)

for M2008

Teeth Socket 28mm(D) for M2008

Teeth Socket 19.5mm(A) for M2008

Teeth Socket 22.3mm(B) for M2008

NT1-SKTE-32T2560L

PBAR-1321L

PBAR-1363L

DR12-SKTH-25LT2638L

DR12-SKTH-25LT2238L

NT1-SKTE-32T2860L

NT1-SKTE-32T2060L

NT1-SKTE-32T2260L


146

M3817 Page 115

Square - 3/8" x 8mm

Square - 3/8" x 9.5mm

Square - 3/8" x 10mm

Square - 3/8" x 10.5mm




Hex - 3/8" x 8mm

Hex - 3/8" x 9mm

Hex - 3/8" x 10mm

Hex - 3/8" x 12mm

Hex - 3/8" x 13mm

Hex - 3/8" x 14mm

Hex - 3/8" x 17mm

Star - 3/8" x 16mm

Square Hole - 3/8" x 10mm

Triangle - 3/8" x 10mm

DR38-ODPK-SQ08CV

DR38-ODPK-SQ09HCV

DR38-ODPK-SQ10CV

DR38-ODPK-SQ10HCV

DR38-ODPK-SQ11CV

DR38-ODPK-SQ12CV

DR38-ODPK-SQ13CV

DR38-ODPK-H8CV

DR38-ODPK-H9CV

DR38-ODPK-H10CV

DR38-ODPK-H12CV

DR38-ODPK-H13CV

DR38-ODPK-H14CV

DR38-ODPK-H17CV

DR38-ODPK-SP16CV

DR38-ODPK-XS10CV

DR38-ODPK-XT10CV


Spare parts

M3234 Page 103

Impact Socket Adapter 3/4"F-1/2"M

for M3234


for M3234


for M3234


for M3234


for M3234


for M3234

DR34-ADSI-12DRCRM

DR12-ADSI-34DRCRM

DR38-ADSI-12DRCRM

DR12-ADSI-38DRCRM

DR14-ADSI-38DRCRM

DR38-ADSI-14DRCRM


M3414 Page 78



3/4" Dr. Sliding T-Bar - 450mm


Quick Release











DR34-BARE-100L

DR34-BARE-200L

DR34-BART-SL450L

DR34-HDRQ-24T

DR34-SCKT-6P2250L

DR34-SCKT-6P2451L

DR34-SCKT-6P2752L

DR34-SCKT-6P3053L

DR34-SCKT-6P3254L

DR34-SCKT-6P3658L

DR34-SCKT-6P3860L

DR34-SCKT-6P4164L

DR34-SCKT-6P4668L

DR34-SCKT-6P5072L


M3852 Page 75

3-Way Adapter - 1/2"F x 3/8"M



























Quick release


























DR12-AD3W-38M40L

DR38-BARE-150L

DR38-BARE-75L

DR38-BISK-H0348L

DR38-BISK-H0448L

DR38-BISK-H0548L

DR38-BISK-H0648L

DR38-BISK-H0748L

DR38-BISK-H0848L

DR38-BISK-H1048L

DR38-BISK-PH0148L

DR38-BISK-PH0248L

DR38-BISK-PH0348L

DR38-BISK-PZ0148L

DR38-BISK-PZ0248L

DR38-BISK-S05H48L

DR38-BISK-S06H48L

DR38-BISK-TT1048L

DR38-BISK-TT1548L

DR38-BISK-TT2048L

DR38-BISK-TT2548L

DR38-BISK-TT3048L

DR38-BISK-TT4048L

DR38-BISK-TT4548L

DR38-BISK-TT5048L

DR38-BISK-TT5548L

M0136, M0380,

M0381

DR38-JTUN-58L

DR38-SCKD-6P1062L

DR38-SCKD-6P1262L

DR38-SCKD-6P1362L

DR38-SCKD-6P1562L

DR38-SCKD-6P1762L

DR38-SCKT-6P0628L

DR38-SCKT-6P0728L

DR38-SCKT-6P0828L

DR38-SCKT-6P0928L

DR38-SCKT-6P1028L

DR38-SCKT-6P1128L

DR38-SCKT-6P1228L

DR38-SCKT-6P1328L

DR38-SCKT-6P1428L

DR38-SCKT-6P1528L

DR38-SCKT-6P1628L

DR38-SCKT-6P1730L

DR38-SCKT-6P1830L

DR38-SCKT-6P1930L

DR38-SCKT-6P2030L

DR38-SCKT-6P2130L

DR38-SCKT-6P2230L

DR38-SCSP-6P1665L

DR38-SCSP-6P2165L


M3591 Page 64

Wooden Top Plate M3500-MDF01


147

M9516 Page 114

Chisel 3/4" x 7" x1/2"

Chisel 5/8" x 6-1/2" x 12mm

Chisel 1/2" x 6" x 11mm

Chisel 3/8" x 6-1/2" x 8mm

Center Punch 1/8" x 5" x 8mm

Center Punch 3/16" x 6" x 11mm

Pin Punch 1/4" x 5-3/4" x 11mm

Pin Punch 3/16" x 5-1/4" x 3/8"

Pin Punch 5/32" x 5" x 3/8"

Pin Punch 1/8" x 4-3/4" x 8mm

Pin Punch 3/32" x 4-1/4" x 1/4"

Taper Punch 3/32" x 5-1/4" x 8mm

Taper Punch 1/8" x 5-3/4" x 3/8"

Taper Punch 5/32" x 6" x 3/8"



PCHS-19178L

PCHS-16165L

PCHS-13152L

PCHS-9H165L

PCNT-03127L

PCNT-05152L

PPIN-6H19L

PPIN-05133L

PPIN-04177L

PPIN-03121L

PPIN-2H108L

PTAP-2H133L

PTAP-03146L

PTAP-04152L

PTAP-05159L

PTAP-6H171H


IJS6000 Page 126

Accu 300/600/6000 for IJS6000

Jump Start Cable EC5/10 for IJS6000

Color Box for IJS6000

Full manual for IJS6000 serial &

IJS11000 serial

USB cable 3 in 1 i3/i5/mUSB

EVA Case for IJS6000/8000 serial

Power Adaptor cigarette/5V/2A for

IJS6000/8000 serial

Power Adaptor USB/5V/2A/BS for

IJS6000/8000 serial

Power Adaptor USB/5V/2A/EU for

IJS6000/8000 serial

IJSACU630

IJSEC510

IJSBX6EU

IJSMNU2015

IJSUSBi35m

IJSEVA6

IJSPSC5V2C

IJSPSU5V2BS

IJSPSU5V2EU


IJS6000D Page 126

Accu 350/700/6000 for IJS6000D

Color Box for IJS6000D/BS

Color Box for IJS6000D

Jump Start Cable EC5/8 for

IJS6000D, IJS8000, IJS11000




IJS6000/8000 serial


IJS6000/8000 serial


IJS6000/8000 serial

IJSACU635

IJSCBX6DBS

IJSBX6DEU

IJSEC508

IJSUSBi35m

IJSEVA6

IJSPSC5V2C

IJSPSU5V2BS

IJSPSU5V2EU


Spare parts

U0705 Page 141

Gear set #1 for U0705 (blue)



Gear set #1 for U0705 (black)



Handle Crank for U0705

Handheld Remote Control for U0705

Electric Motor for U0705

Wall Mount Plate for U0705

Winch Cable Hook for U0705

Wire Harness assy for U0705

U0705-GS1

U0705-GS2

U0705-GS3

U0705-GS4

U0705-GS5

U0705-GS6

U0705-HC

U0705-HRC

U0705-MT

U0705-PL

U0705-WCH

U0705-WHA


IJS8000 Page 128

Accu 370/740/8000 for IJS8000


IJS6000D, IJS8000, IJS11000




IJS6000/8000 serial


IJS6000/8000 serial


IJS6000/8000 serial

IJSACU837

IJSEC508

IJSUSBi35m

IJSEVA6

IJSPSC5V2C

IJSPSU5V2BS

IJSPSU5V2EU


IJS11000 Page 127

Accu 400/800/11000 for IJS11000

EVA Case for IJS11000 serial

Power Adaptor 15V/1A/EU for IJS11000


IJS11000

Color Box for IJS11000


IJS6000D, IJS8000, IJS11000


Full manual for IJS6000 serial &

IJS11000 serial

IJSACU114

IJSEVA11

IJSPSA15V1EU

IJSPSC12V1C

IJSCBX11EU

IJSEC508

IJSUSBi35m

IJSMNU2015


148

Index

1

10500 8 + 910990 8 + 91102500 8 + 91104500 8 + 91106500 8 + 91108500 8 + 91112500 8 + 91112900 8 + 91120500 8 + 91120900 8 + 91412000 8 + 91420000 8 + 91430000 8 + 91202100 8 + 91204100 8 + 91730200 8 + 91820200 8 + 91820600 8 + 91850200 8 + 92 2102701 12 + 152103001 10 + 142119077 1402119080 1402119086 1402119087 1402119088 1402119089 14022101C 17 + 1822201 17 + 1822903 48 + 4922910 46 + 4723152 19 + 2423205 22 + 2523207 22 + 2523211 22 + 2523212 20 + 2423301C 23 + 2523501 23 + 2523991 23 + 2524113 21 + 2424213 21 + 2424301 23 + 2424601 23 + 24

2501503 13 + 152505700 16 + 182510700 16 + 182602701 11 + 142702701 11 + 1428045 13 + 152902301 12 + 152902401 10 + 142902501 12 + 152903011 11 + 152903101 10 + 142903201 12 + 152903501 10 + 142903701 11 + 143 31000 38 + 393203100 28 + 303203500 28 + 303203900 29 + 303206100 28 + 303206500 28 + 303207500 29 + 303210901 29 + 303212100 28 + 303212500 28 + 303220100 28 + 303222500 29 + 304 41000C 32 + 3341001 32 + 3341100C 32 + 3341901 314200000 32 + 3342001 32 + 3343000 3344012 35 + 3744017 35 + 3744018 35 + 3744020 36 + 3744943 3644947 3644949 3644980 3646030 3146060 31

46100 3147020 45 + 4747053 46 + 475 50040 3450100 3455040 48 + 4955049 48 + 4955100 48 + 4955109 48 + 496

60253 42 + 4361015 4061025 4061030 4061050 4061154 40 + 4161204 40 + 4161304 40 + 4161504 40 + 4165124 42 + 436615000 447 71055 48 + 4971105 48 + 499 90068 38 + 3990150 35 + 3690165 38 + 3990250 46 + 479210000 44A A1000 58

AMP120310 112AMP120315 112AMP120720 112AMP120725 112AMP121230 112AMP121235 112AMP121240 112AMP121550 112AMP221102 113AMP221103 113AMP221110 113

AMP230110 112AMP230410 112AMP230710 112AMP230810 112AMP320202 113AMP320303 113AMP321004 113AMPC230110 112AMPC230410 112AMPC230710 112APS1202 113APS1203 113APS1204 113B B0200 52B0400 52B0600 52C C1001 58C-9802 129C-9803 129C-9806 129C-9836 131CP4031 130CP5031 130CP6031 130CP7031 130CP9605 131F F2000 53 + 55F2000 B 53 F5210 53 + 55F7670 53 + 55G G1250 54 + 55G2000 54 + 55G2250 54 + 55G3003 54 + 55H HR8000 118HRD70 134HRD100 134HRK8007 119HRP42 135HRP100 135

HS7000 120HSS7006M 120HSS7006S 120HSS7006Z 120HSS7008S 120HSS7008V 120HSS7008Z 120I I-7015 128IJS6000 126IJS6000D 126IJS8000 128IJS11000 127M M0001 115M0003 86M0006 71M0012 70M0013 70M0017 73M0023 68M0027 69M0029 69M0032 110M0034 85M0043 85M0048 69M0060 110M0078 73M0105 80M0119 83M0121 86M0122 86M0127 68M0138 110M0141 86M0142 86M030N 96M0381 86M0382 86 M110N 96M1000N 96M1208 84M1210 84

149

Index

M1217 103M1219 97M1228 78M1234 84M1256 82M1297 77M1395 76M1401 139M1443 74M1500 81M1500N 97M1700 115 M2008 111M2012 70M2016 100M2020 111M2033 101M2034 100M2038 101M2041 101M2042 101M2060 98M2062 99M2063 98M2064 98M2072 99M210N 96M2212 96M2214 96M2238 96M2305 88M2308 88M2312 88M2339 90M2402 87M2405 89M2408 89M2412 89M2435 85M2502 91M2560 91M2562 91M2563 91

M3203 108M3205 106M3206 105M3211 103M3215 109M3232 107M3234 103M3306 103M3314 102M3316 102M3322 102M3350 65M3379 65M3397 65 + 66M3414 78M3424 97M3500-MDF02 62M3531 62M3591 64M3593 64 + 66M3760 63M3770 63 + 66M3808 106M3817 115M3852 75 M500N 96M5001 116M5713 79 M7320 97M7580 87M7583 87M7584 87M7585 87M7586 87M7587 87M7588 87M7589 87M7591 87M7592 87M7593 87M7594 87M7596 87M7597 87

M7598 87M7599 87M7808 87M7809 87M7810 87M7811 87M7812 87M7813 87M7814 87M7815 87M7816 87M7817 87M7818 87M7819 87

M8000 73M8011 73M8015 79M8104 70M8107 72M8203 71M8204 71M8207 72M8304 71M8306 72M8308 72 M9004 116M9009 114M9036 116M9048 116M9056 116M9104 90M9304 92M9305 94M9306 94M9307 95M9308 94M9383 95M9393 95M9402 93M9403 93M9404 93M9405 93M9406 93

M9409 105M9410 92M9411 92M9414 111M9416 91M9438 92M9455 92M9506 114M9516 114M9703 106M9706 105M9711 105M9737 104M9807 121M9900 117M9901 117M9907 121M9911 117M9916 121M9922 117M9924 121M9930 117M9999 122M9999-03 122M9999-04 122M9999-S 122

MD02 66MD12 66MD15 67P P0501 59PA-01 139PA-02 139PL-1001B 136PL-1001G 136PL-1001O 136PL-1007 136PL-1016 137PL-1200C 137PL-2300 136PL-514 137PL-530 137PO-08 138PO-10 138

PO-16 138PO-44 138R RS-9833 131S

S0501T 31 + 59SB001B 26SB001Y 26SB002B 26SB002Y 26SP44410 27SP55415 27SP66420 27SP66625 27SP1010650 27SW001B 26SW002B 26T T2002 56T3003 56T3004 56T5350B 57TI-00001 133TI-00003 133TI-10711 132TI-10721 132TI-11221 132TI-11224 133U U0705 141W W2001 139

150

---PRESS RELEASE---

Omega Mechanix new sponsor of United Autosports

Roosendaal, The Netherlands

Omega Mechanix is one of the sponsors of United Autosports for 2016 and 2017. United Autosports is a well-known GT and sports car team, based in Leeds, West Yorkshire, UK. This year United Autosports are making their debut in the European Le Mans Series. To improve the brand awareness, the logo and the brand name of Omega Mechanix will appear on the Ligier JS P3 cars. In addition, Omega Mechanix also sponsors the GT Cup.

United AutosportsUnited Autosports was founded in 2009 by businessman Zak Brown and racing driver Richard Dean. United Auto-sports have raced in a number of different championships, with a vast range of cars and drivers. United Autosports are hugely experienced in racing in the UK and Europe, as well as worldwide, having entered events in Asia, Australia and America.

151

Shinn Fu Europe“Omega Hydraulics and Omega Mechanix’ workshop tools has a market leading range of workshop hydraulics equipment which is tried, tested and used by thousands of car and commercial workshops in the UK, along with hundreds of leading Fast Fit locations”, United Autosports said. United Autosports sees Omega Hydraulics and Omega Mechanix as quality brands.

EventsThe European Le Mans Series serves as the leading championship for endurance racing in Europe. The champion-ship visits seven of the top race circuits in Europe for a two-day event, culminating in a four-hour race. Each event provides plenty of entertainment for the thousands of spectators that attend.For remaining races check the website of United Autosports: www.unitedautosports.com

---End of Release---

ContactFor more information about this sponsorship, please contact:

Shinn Fu Europe Munnikenheiweg 50 4879 NG Etten-Leur The Netherlands Tel.: +31 (0)165 583 300 [email protected]

GLOBAL LOCATIONSwww.shinnfu.com

EUROPE, AFRICA & MIDDLE EASTMunnikenheiweg 50 4879 NG Etten-LeurThe NetherlandsTel.: +31 (0)165-583300Fax: +31 (0)165-583310Email: [email protected]

AUSTRALIA & PACIFIC15 Viewtech PlaceRowville 3178, Victoria AustraliaTel.: +61 3 9755-8277Fax: +61 3 9755-8219Email: [email protected]

ASIA7F., NO. 408 Ruei Guang RoadNei Hu District, Tapei City 114Taiwan R.O.C.Tel.: +886 2 8751-7888Fax: +886 2 8751-7999Email: [email protected]

CHINA3950 Hu Min Road201108, ShanghaiChinaTel.: +86 21 64891469Fax: +86 21 64891465Email: [email protected]

USA, CANADA, MEXICO, CENTRAL & SOUTH AMERICA10939 N. Pomona Ave.Kansas City, MO 64153Tel.: +888 332 6419, +816 891 6390Fax: 816 891 6599Email: [email protected]

version 2017-04

Date post:	19-Sep-2020
Category:	Documents
Upload:	others
View:	2 times
Download:	0 times

SHINNFU 2016 CAT - Tool Centre · 2018. 10. 3. · • Two (2) years limited warranty for...

Documents