32
LIVE FIRE - TRAIN AS YOU FIGHT SHOOTING RANGE EQUIPMENT APPLICATIONS & SERVICES INFO@THEISSENTRAINING.COM WWW.THEISSENTRAINING.COM
Live Fire - Train as you FighT
Shooting Range equipment
applicationS & SeRviceS
[email protected] www.theiSSentRaining.com
contentS
contentS
� company oveRview
� applicationS & SeRviceS
� infantRy taRgetS
� aRmoR taRgetS
� pReciSion taRgetS
� indooR taRgetS
� Range contRol SyStemS
� additional equipment
� cuStomeR & Range SeRviceS
� field SeRviceS & aSSiStance
� deSign, development & pRoduction
� inteRnational RefeRenceS
www.theissentraining.com 2
contentS
Theissen Training Systems (TTS) is one of the leading manufacturers of live-fire training applications, with production sites in Germany, Belgium and North America. We develop, produce and install complete training range systems for Small Arms Ranges, Military Operations in Urban Terrain (MOUT) facilities, and Combined Arms Live-Fire Exercise (CALFEX) Ranges, that include Tank and Attack Helicopter operations.
Our highly qualified and well trained research and development team with application engineers, software specialists, electronics engineers, and electricians can customize products to meet end users specifications and infrastructural requirements. To enable swift and timely response to complex and challenging training requirements, our research and development departments are co-located at our headquarters in Dusseldorf, Germany. With sales and engineering working hand-in-hand and communicating face-to-face, we can not
only supply off-the-shelf products, but can also provide highly customized solutions meeting your specifications and requirements.
For more than a century, the founder and his family have been active in engineering and production. Since 1934 the name Theissen has stood for leading designers and producers of target appliances of all kind. Back in the early days, the company was called “Fritz Theissen & Söhne”, and later “Theissen Fassaden- und Maschinenbau GmbH”. One of Theissen’s departments was specialized in targetry. Due to Theissen’s good quality and long presence in the targetry business, some users call a pop-up target mechanism a Theissen (pronounced Tyson), and are in fact referring to the founder’s name. In 1993 the management decided to focus exclusively on targetry products; thus Theissen Training Systems was established.
company oveRview
ttS - theiSSen tRaining SyStemS
company oveRview
Our reputation for reliable, responsible, and honest business conduct has been built up over the years and has been tested and proven true by customers all around the globe. We have the in-depth expertise and extensive experience required to find the right training solution for any challenge in live-fire applications. Our modular product range enables us to put together well proven components from existing products to supply tailor made solutions. With our extensive application skills, we know how to maximize the installed efficiency and the lifespan of the product, regardless of application type. Our application engineers assist you with expert knowledge all the way from prototyping and testing to serial installation and support.
Military veterans are employed to advise and support customers with their wide range of knowledge in the field of live fire training and range operation. Continuously developing a broad range of sophisticated of-the-shelf target mechanisms, our design processes, engineering guidelines, regulations, and documentation steps comply with the requirements of the most common public, military, national, and international standards.
advantageS
applicationS & SeRviceS
CNC Milling
Turnkey Installation
Engineering
Raw Material Selection
Scalable Production
Electromechanical Works
Operation & Maintenance Training
Research & DevelopmentConsultancy & Project Management
www.theissentraining.com 4
advantageS
TTS offers a wide range of multifunctional infantry target mechanisms for all types of shooting ranges.
The flagship of our product range sets standards for live-fire training and can be deployed in eight (8) different modes as stationary and moving target systems, utilizing our world-patented Target Cube unit. This modifiable target mechanism offers a unique combination of flexibility, excellent reliability, and safe easy handling.
The modular concept of our systems enables us to provide deployable, as well as permanently installed, versions of our target lifters supporting flexible applications as radio- or landline controlled, hardwired or battery-powered, solar-powered, or a combination of either or all. These attributes contribute to extraordinary energy efficiency and allows extensive operational cycles without the need of permanent battery charging. Additionally, the compact design and low weight enable convenient transport and easy storage.
infantRy taRgetS
StationaRy infantRy taRgetS
infantRy taRgetS
TTS offers eight different main modes of displaying infantry target silhouettes, all performed by just one world-patented mechanism, the Target Cube. Additonally all infantry targets can be delivered as moving systems.
1 2 3 4 5 6 7 8
Pop-up Pop-up/Turning 90° Slashing Sliding Rising Friend/Foe Shearing 180° Slashing
infantRy taRgetS
www.theissentraining.com 6
Because of the high demand for counter terrorism training, friend and foe discrimination skills have become more and more important. To address this enhanced situational awareness requirement, TTS has designed a fully mechanized adaptor attached to our Infantry Pop-Up Targets which presents both front and back view as well the neutral position. The adaptor can turn in the raised and lowered positions as well as on the move.
Bi-diRectional & multifunctional SyStemS
infantRy taRgetS
infantRy taRgetS
Shooting on moving (running) targets is a real challenge and provides enhanced situational training for any shooter. Moving target training continues to build the unique awareness and reactionary self-confidence necessary in today’s ever changing live-fire environment.
At TTS, the further expansion of our modular target systems encompasses the abilities where targetry, silhouettes, motion, and speed can be altered to diversify the training and thus enhance training realism.
With these capabilities, our animation can be as unpredictable as the real combat threat.
moving infantRy taRgetS
www.theissentraining.com 8
Military Operations in Urban Terrain (MOUT), Close Quarters Battles (CQB), and Fighting In Built Up Areas (FIBUA) are very different from conventional open field warfare operations and require adequate training equipment.
At TTS, we have the know-how to assist you in adapting your training facilities to modern combat requirements and offer compact and portable training systems with a wide variety of animation modes. Due to low profile and compact design, all our infantry target appliances are suitable for MOUT and FIBUA training.
Multiple target modes allow intensive and realistic live fire training. Various adaptors and add-ons are available to further increase training realism.
cloSe comBat tRaining SolutionS
infantRy taRgetS
infantRy taRgetS
www.theissentraining.com 10
aRmoR taRgetS
Our armor target systems serve typically on combined arms and multi-purpose ranges and simulate appearing and disappearing full-scale tank targets.
With its enormous lifting capacities, our mechanisms reliably operate in the training of powerful weapon systems and easily outrivals competitive tank target lifters in lifting speed and lifting load.
We offer battery powered, radio controlled, compact, and low weight deployable Stationary Armor Lifters particularly popular and adaptive to training deployed troops. The compact design further allows for easy handling, storage, and transportation.
aRmoR taRgetS
StationaRy aRmoR taRgetS
aRmoR taRgetS
www.theissentraining.com 12
Since modern arms with computerized Gun Fire Control Systems require full size target boards, our powerful Moving Armor Targets are the perfect choice for Heavy Tank and RPG Training Ranges. Our product range covers systems able to move 600 kg silhouettes with up to 60 km/h, modular and portable systems, as well as systems allowing curved trails. With its strong lifting mechanism and the fast drive unit, our systems can move frontal tank silhouettes, half-scaled flank targets, tank turrets, and APCs. The systems can move pop-up targets up to a size of 7m x 3m. Also, it can be outfitted with a rigid vehicle silhouette and a Stationary Infantry Target in pop-up mode representing the driver.
moving aRmoR taRgetS
aRmoR taRgetS
aRmoR taRgetS
www.theissentraining.com 14
pReciSion taRgetS
pReciSion taRgetS
lomah - location-of-miSS-and-hit
For precision shooting and zeroing, we offer cutting edge marking and scoring technologies for supersonic and subsonic projectiles.
The Location of Miss and Hit (LOMAH) system is a training and zeroing system for precision shooting ranges. It provides immediate performance feedback for supersonic ammunition and specifies the positions of hits on a target, or near misses beside the target, with exceptional accuracy.
A TTS LOMAH can be installed on existing targetry and is prepared for legacy or other vendors’ target mechanisms. It enables interaction with, and is powered through, the target it is connected to. The calculated position of the shot
is transmitted down the range and can be displayed on a handheld controller, a range computer, or a shooter’s monitor.
Due to automatic scoring, the system omits the need for repeated access to the target area for the retrieval of information. The system reduces errors that are made in manual and time-consuming measurements and analysis of shots. Data loss that is caused by the failure to measure all shots due to identically placed rounds, particularly in the case of automatic fire, is eliminated.
Using a wide-angle 3D LOMAH consisting of a special detection unit enables a wide shooting angle up to Azimuth: ± 30° and Elevation: ± 10°.
pReciSion taRgetS
www.theissentraining.com 16
pReciSion taRgetS
The Box Target systems can be used for the scoring of hits for all kind of small arms, including pistols and sub-machine guns with subsonic ammunition. The high performing sensing solution, consisting of three sensors mounted inside a wooden framed target, register the shockwave generated by a projectile. The generated signals are used to calculate the position of the shot. Rubber is positioned around the frame to give a zero-wind detection system for the automatic sensors.
The acoustic sensors operate in the subsonic as well as in supersonic regions. In combination with a target lifting mechanism, a Box Target can be moved from concealment to exposure and returned for maintenance or replacement of silhouettes if the shooting line is not in use. To protect the target in concealment position, the target pit can be covered by a shutter.
Box taRgetS foR SuBSonic ScoRing
Either simultaneously or independently of the control system, a fully computerized Shooter’s Monitor enables operation and hit evaluation right at the firing line on precision live-fire ranges equipped with LOMAH Targets or Box Targets. The monitor gives a detailed view and precise hit results. Registered hits are displayed graphically as well as in Cartesian co-ordinates. Shot results are displayed instantly providing immediate performance feedback. The shooter sees the location of the shot and can, if necessary, correct his aiming point.
Our Shot Sensors, developed to guarantee unimpeachable hit counting and to eliminate wrong scoring on multi-lane ranges, are installed on each firing position. With two high performing acoustic sensors, the muzzle bang of a weapon fired is registered. A registered hit of a target, on a lane where no shot was fired at the shooting position, will be displayed and marked as invalid.
pReciSion Shooting equipment
pReciSion taRgetS
www.theissentraining.com 18
TTS target mechanisms are mainly used outdoors because of their sturdiness. Nevertheless, these products are perfectly applicable indoors and guarantee high reliability.
Additionally, we manufacture, supply, and install overhead retrieval target systems in various configurations that are specifically designed for dynamic and scalable training in indoor shooting ranges.
These easy to use small arms target systems are specifically designed for dynamic and scalable training in indoor shooting ranges and support training at varying shooting distances, while simultaneously, the 180° turning target mechanism presents the friend or foe side of a target board.
indooR taRgetS
indooR taRgetS
StationaRy & moving SolutionS
indooR taRgetS
www.theissentraining.com 20
We offer fully computerized Range Control Systems for infantry target mechanisms, tank target mechanisms, moving target systems, enemy fire simulators, and automatic scoring systems.
Whether you are responsible for a 15 square kilometer radio-controlled Multi Purpose Range Complex or a hardwired Small Arms Range, TTS supplies you with compact hand held controllers as well as sophisticated range computers to operate your targetry equipment and to immediately evaluate live-fire exercises. All range control solutions allow convenient and user friendly total control of the range and provides detailed training critique data to support after action reviews.
Range contRol SyStemS
deSktop SolutionS & moBile contRolleRS
Range contRol
Range contRol
www.theissentraining.com 22
additional equipment
additional equipment
SimulatoRS, acceSSoRieS & optionS
• Target Illumination• Sound Effect Simulators• Muzzle Flash Simulators • Enemy Fire Simulators• Battlefield Effect Simulators• Thermal Image Systems
• Trigger Devices • Laser Engagement Receivers• Range Surveillance & CCTV Systems• Public Address Systems• Solar Panels• Ballistic Shields
TTS delivers a wide variety of simulators to increase training realism and accessories to further increase functionality:
Battle and Sound Simulators realistically create the acoustical impression of a tank, anti-tank weapon, or a hostile fire weapons system. Thermal Imaging Systems are used to heat target silhouettes of infantry or armor targets that can be seen by thermal night-vision device. Trigger devices (e.g. light barriers, motion sensors, pressure pads) can be used to lift up popup targets or to switch on other devices through the motion of objects and persons.
additional equipment
www.theissentraining.com 24
cuStomeR & Range SeRviceS
tuRnkey pRojectS & afteR SaleS SeRviceS
Turnkey services deliver complete indoor pistol ranges as well as fully equipped training camps inclusive in all required infrastructure. Professional maintenance teams and our spare parts service ensure reliable shooting range operation. We offer customized services like extended warranty programs, logistics support, maintenance contracts, and long term spare part services. With our extensive application skills, we know how to maximize the installed efficiency and the lifespan of the product regardless of application type.
At TTS, service starts long before sales, but doesn’t end there. With every purchase, we provide you the full extent of our experience and professional customer service. The deal and the handshake isn’t the end, it’s the beginning of a long-lasting and dependable partnership. Before, during, and after training at designated training facilities, TTS Field Service experts deliver the right assistance and support thus saving you critical training time while expanding training opportunities.
tuRnkey pRojectS
TTS offers a broad spectrum of range operation contracts. Trained system administrators are available to operate the range equipment efficiently and professionally to tap the full potential of your range and its targetry. With our maintenance & range management contracts we keep your range in the best operational conditions.
Military veterans and former Training Program Managers are employed to assist you in range design, technical upgrade programs, training procedures, and related issues. Extensive planning and requirements analysis provide the keys to a successful range operation.
TTS has the knowledge and experience to help your forces improve firing and marksmanship skills.
Range SeRviceS
field SeRviceS & aSSiStance
opeRation, tRaining & maintenance
www.theissentraining.com 26
deSign, development & pRoduction
deSign, development, pRoduction
& quality management
All design, development and production is done within TTS. All of our systems and devices are designed, developed, and manufactured with modern equipment and well-trained personnel.
Our development & design processes, engineering guidelines, installation regulations, and documentation steps comply with the requirements of the most common public, military, national, and international standards.
On 15000 m2 worldwide, our production plants manufacture quality products. The production is done with modern equipment and well-trained personnel. Over recent years the plants have been continuously expanded and modernized. TTS has spent 22 million US$ for research and development to deliver the finest targetry products. Due
to the fact that all design, development, and production is done by TTS, the availability of systems, electrical and mechanical spare parts is always guaranteed.
Since 2001, TTS has established a quality management system according to the ISO 9001 standard. Ever since TTS has complied with the rules of efficient and modern management rules and has held a valid certificate (ISO 9001:2008). This quality certificate is your assurance that TTS maintains a robust quality management system.
Our quality assurance and control process begins by applying qualified and experienced staff over developing a process, action plan, and a description of performance measures relevant to the specific task. Performance indicators
and measurement points will provide the customer maximum visibility and will provide sufficient insight into the TTS processes.
Test procedures include storage and operational tests in extreme temperatures, endurance, and high work load tests. To verify the various physical and mechanical properties of the finished products, various tests, both destructive and non-destructive, are performed. Fatigue and live cycle tests, deep temperature tests, high temperature tests, one-meter drop tests, transportation tests, and endurance testing as well as water, sand, and dust resistance tests are some of the major tests that are performed by quality control personnel. Furthermore, various types of environmental exposure testing are carried out to simulate actual use conditions. Temperature tests are conducted in heat and cold climate chambers to assure full functionality under all environmental conditions.
We secure the maximum safety level in each part of the process from production over delivery to installation by regulations and procedures. Our systems do not present uncontrolled safety, health, or environmental hazards to operators and maintainers throughout the life cycle of the system.
• Quality Management System ISO 9001:2008• Research & Development Center• All design, development & production done by TTS• 15000 m2 worldwide production plants• Modern Equipment & Well-trained personnel• Availability of systems always guaranteed• Various operational test procedures • Maximum product safety
pRoduction
www.theissentraining.com 28
United StatesGermany Kingdom of Saudi Arabia
AustriaThe Netherlands United States - Alaska
Great BritainKuwait Belgium
United Arab EmiratesUnited States Switzerland
inteRnational RefeRenceS
paSt peRfoRmance
paSt peRfoRmance
United StatesGermany Brunei
AustriaThe Netherlands Canada
JordanMexico Singapur
QatarBrazil Malaysia
ttS RefeRenceS
www.theissentraining.com 30
www.theiSSentRaining.com
contact
theiSSen tRaining SyStemS gmBh
Schuchardstr. 3D-40595 DüsseldorfGermanyTel.: +49 (211) 97504-0Fax: +49 (211) 97504-33Email: [email protected]
theiSSen tRaining SyStemS, INC.
1225 SE 4th TerraceChiefland, Florida 32626 U.S.A.Phone: +1 (352) 490-8020Fax: +1 (352) 490-7788Email: [email protected]
![Molina Theissen v. Guatemala - Loyola Law School · 2014] Molina Theissen v. Guatemala 1891 clandestine custody for nine days in the installations of the Manuel Lisandro Barillas](https://static.documents.pub/doc/80x56/5b823ca77f8b9a2b6f8e1064/molina-theissen-v-guatemala-loyola-law-school-2014-molina-theissen-v-guatemala.jpg)
