technical product sheet
short name: BBS*liner blank, design A
DIN 11853-1/ DIN 11864-1
Art.-Nr.LD3DDNAnschl.
HYGI-BBS080-ISO-N
HYGI-BBS065-ISO-N
HYGI-BBS050-ISO-N
HYGI-BBS040-ISO-N
HYGI-BBS032-ISO-N
HYGI-BBS025-ISO-N
HYGI-BBS020-ISO-N
HYGI-BBS015-ISO-N
HYGI-BBS010-ISO-N
HYGI-BBS100-DIN-N
HYGI-BBS080-DIN-N
HYGI-BBS065-DIN-N
HYGI-BBS050-DIN-N
HYGI-BBS040-DIN-N
HYGI-BBS032-DIN-N
HYGI-BBS025-DIN-N
HYGI-BBS020-DIN-N
HYGI-BBS015-DIN-N
HYGI-BBS010-DIN-N
20,0
16,0
16,0
14,0
13,0
13,0
12,0
10,0
9,0
20,0
16,0
16,0
14,0
13,0
13,0
12,0
10,0
9,0
9,0
118,9
98,9
84,9
66,9
54,9
48,9
42,9
35,9
27,9
118,9
98,9
84,9
66,9
54,9
48,9
42,9
35,9
37,9
21,9
114
93
79
61
48
41
35
30
24
114
93
79
61
48
41
35
30
24
18
80
65
50
40
32
25
20
15
10
100
80
65
50
40
32
25
20
15
10
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
ISO
DIN
DIN
DIN
DIN
DIN
DIN
DIN
DIN
DIN
DIN
Systems › DIN 11864/ DIN 11853 › pipe unions › hygiene DIN 11853-1 › liner blanks
available material: ask
1/3created 07.07.2018 00:02
O-ring is deformed by this so that a smooth port free of dead space and a sealed connection are produc
evenly tightened until the faces of the flanges come into contact with each other. The
stick out of the other flange. The nuts are screwed onto these threads and
heads of the screws are on the outer surface of one flange and the threads of the screws
screws are inserted through the holes drilled in the flanges so that the
The flanges and the O-ring are therefore coaxially centered. After that, the
O-ring by itself. The collar flange is then placed against it so that both flanges engage each other.
When assembling the product the O-ring is inserted in the grooved flange which will steadily hold the
Assembling
compatible. The blind parts are only available in the DIN 11853-2 Version.
The Aseptic and Hygene flange connections according to DIN 11864-2 respectively DIN 11853-2 are
DIN 11864 <> DIN 11853
Ra inner < 0,8 µm, Ra outer < 1,6 µm (H3)
AISI 316L/ 1.4404, optional 1.4435 (Ferrit < 0,5%)
DIN-DN 10-150, ISO-DN 8-100
Produced with punctuation for O-Ring
DIN 11866 Row A + B as well as DIN 11850 (Row 2)
Description
Surfaces
Material
Sizes
Form A
Pipe Dimentions
Type
Features
Hygene-Flange Connection
Blind-Groove Flange DIN 11853-2
created 07.07.2018 00:02 2/3
max. 10 bar
max. 16 bar
max. 25 bar
bar
114,3 - 154,0 m
42,4 - 101,6 mm
up to 41 mm
Pipe-AØ
at 140°C and with the usage of suitable seals
Operating Pressure
created 07.07.2018 00:02 3/3