SHORT TERM COURSE 2019 - GMI

SHORT TERM COURSE 2019

Page | 1 of 9

DATE – 2019 AUTOMATION & MECHATRONICS TECHNOLOGY

TRAINING PROGRAM

DURATION (DAYS)

COURSE FEE PER PAX (RM)

JANUARY - MARCH APRIL - JUNE JULY – SEPTEMBER OCTOBER – DECEMBER

1. SOLIDWORKS – BASIC COURSE 5 2500 07 – 11/01 11 – 15/02 01 – 05/04 17 – 21/06 01 – 05/07 23 – 27/09 07 – 11/10 16 – 20/12

2. HYDRAULICS TECHNOLOGY 4 2000 07 – 10/01 11 – 14/02 01 – 05/04 17 – 20/06 01 – 04/07 23 – 26/09 07 – 10/10 16 – 19/12

3. PNEUMATICS TECHNOLOGY 4 2000 07 – 10/01 11 – 14/02 01 – 05/04 17 – 20/06 01 – 04/07 23 – 26/09 07 – 10/10 16 – 19/12

4. PROGRAMMABLE LOGIC CONTROLLER: BASIC PROGRAMMING 3 1650 07 – 09/01 11 – 13/02 01 – 03/04 17 – 19/06 01 – 03/07 23 – 25/09 01 – 03/10 16 – 18/12

5. PROGRAMMABLE LOGIC CONTROLLER: ADVANCE PROGRAMMING 3 1650 07 – 09/01 11 – 13/02 01 – 03/04 17 – 19/06 01 – 03/07 23 – 25/09 01 – 03/10 16 – 18/12

6. ELECTRICAL MOTOR OPERATION AND TROUBLESHOOTING 4 2000 07 – 10/01 11 – 14/02 01 – 04/04 17 – 20/06 01 – 04/07 23 – 26/09 07 – 10/10 16 – 19/12

7. MECHATRONICS SYSTEM TROUBLESHOOTING 3 2000 07 – 09/01 11 – 13/02 01 – 03/04 17 – 19/06 01 – 03/07 23 – 25/09 01 – 03/10 16 – 18/12

8. FUNDAMENTAL OF INDUSTRIAL ROBOTICS 3 1650 07 – 09/01 11 – 13/02 01 – 03/04 17 – 19/06 01 – 03/07 23 – 25/09 01 – 03/10 16 – 19/12

9. INDUSTRIAL ROBOTICS SIMULATION AND PROGRAMMING 4 2000 - 14 – 17/01 01 – 04/04 17 – 20/06 01 – 04/07 23 – 26/09 07 – 10/10 16 – 19/12

10. S7-1200 PLC FOR BEGINNERS 3 1500 07 – 09/01 11 – 13/02 01 – 03/04 17 – 19/06 01 – 03/07 23 – 25/09 01 – 03/10 16 – 18/12

11. PROPORTIONAL HYDRAULIC TECHNOLOGY 3 2000 14 – 16/01 11 – 13/02 01 – 03/04 17 – 19/06 01 – 03/07 23 – 25/09 01 – 03/10 16 – 18/12

DATE – 2019 AUTOMATION AND IOT TRAINING PROGRAM

DURATION (DAYS)



12. BRINGING AUTOMATION TO YOUR PRODUCTION LINE 5 2500 07 – 11/01 11 – 15/02 01 – 05/04 17 – 21/06 01 – 05/07 23 – 27/09 07 – 11/10 16 – 20/12

13. IOT APPLICATION USING WIRELESS SENSOR NETWORK 5 2500 14 – 18/01 18 – 22/02 01 – 05/04 17 – 21/06 01 – 05/07 23 – 27/09 07 – 11/10 16 – 20/12

14. IOT APPLICATION WITH MICROCONTROLLER 5 2000 07 – 11/01 11 – 15/02 01 – 05/04 17 – 21/06 01 – 05/07 23 – 27/09 07 – 11/10 16 – 20/12

15. IOT_APPLICATION_USING_PLC_BRIEF 3 1600 07 – 09/01 11 – 13/02 09 - 11/04 17 – 19/06 01 – 03/07 23 – 25/09 01 – 03/10 16 – 18/12

16. MACHINE VISION COURSE INFORMATION 4 2000 07 – 10/01 11 – 14/02 01 – 04/04 17 – 20/06 01 – 04/07 23 – 26/09 07 – 10/10 16 – 19/12

17. MECHATRONICS (ASSEMBLY, TESTING AND COMMISSIONING) 3 1800 14 – 16/01 18 – 20/02 01 – 03/04 17 – 19/06 01 – 03/07 23 – 25/09 01 – 03/10 16 – 18/12


Page | 2 of 9

DATE – 2019 COMPUTER & NETWORK TECHNOLOGY

TRAINING PROGRAM

DURATION (DAYS)



18. LINUX SYSTEM ADMINISTRATION 5 2500 07 – 11/01 11 – 15/02 01 – 05/04 17 – 21/06 01 – 05/07 23 – 27/09 07 – 11/10 16 – 20/12

19. LlNUX NETWORK ADMINISTRATION 5 2500 14 – 18/01 18 – 22/02 01 – 05/04 17 – 21/06 01 – 05/07 23 – 27/09 07 – 11/10 16 – 20/12

20. COMPUTER & OFFICE AUTOMATION 5 2000 07 – 11/01 11 – 15/02 01 – 05/04 17 – 21/06 01 – 05/07 23 – 27/09 07 – 11/10 16 – 20/12

21. DYNAMIC WEB PROGRAMMING ( INTRODUCTION TO PHP) 3 1600 07 – 09/01 11 – 13/02 09 - 11/04 17 – 19/06 01 – 03/07 23 – 25/09 01 – 03/10 16 – 18/12

22. INTERCONNECTING NETWORK DEVICES 4 2000 07 – 10/01 11 – 14/02 01 – 04/04 17 – 20/06 01 – 04/07 23 – 26/09 07 – 10/10 16 – 19/12

23. NETWORK VULNERABILITY & PENETRATION TESTING 3 1800 14 – 16/01 18 – 20/02 01 – 03/04 17 – 19/06 01 – 03/07 23 – 25/09 01 – 03/10 16 – 18/12

24. SECURED NETWORK DESIGN 5 2500 07 – 11/01 11 – 15/02 01 – 05/04 17 – 21/06 01 – 05/07 23 – 27/09 07 – 11/10 16 – 20/12

DATE – 2019 INSTRUMENTATION & CONTROL TECHNOLOGY TRAINING PROGRAM

DURATION (DAYS)



25. BASIC INSTRUMENTS CALIBRATION 4 2500 07 – 10/01 11 – 14/02 01 – 04/04 17 – 20/06 01 – 04/07 23 – 26/09 07 – 10/10 16 – 19/12

26. INDUSTRIAL PROCESS CONTROL & INSTRUMENTATION 4 2500 07 – 10/01 11 – 14/02 01 – 04/04 17 – 20/06 01 – 04/07 23 – 26/09 07 – 10/10 16 – 19/12

27. DISTRIBUTED CONTROL SYSTEM (SIEMENS) –BASIC APPLICATION 4 2000 07 – 10/01 11 – 14/02 01 – 04/04 17 – 20/06 01 – 04/07 23 – 26/09 07 – 10/10 16 – 19/12

28. INTRODUCTION TO VIRTUAL INSTRUMENTATION AND MEASUREMENT 4 2000 07 – 10/01 11 – 14/02 01 – 04/04 17 – 20/06 01 – 04/07 23 – 26/09 07 – 10/10 16 – 19/12

29. SENSOR TECHNOLOGY 4 2500 07 – 10/01 11 – 14/02 01 – 04/04 17 – 20/06 01 – 04/07 23 – 26/09 07 – 11/10 16 – 19/12

30. ADVANCED PROCESS LAB EQUIPMENT & SYSTEM MAINTENANCE 3 2800 07 – 09/01 11 – 13/02 01 – 03/04 17 – 19/06 01 – 03/07 23 – 25/09 01 – 03/10 16 – 18/12

31. ELECTRONICS EQUIPMENT TROUBLESHOOTING 3 2800 07 – 10/01 11 – 13/02 01 – 03/04 17 – 19/06 01 – 03/07 23 – 25/09 01 – 03/10 16 – 18/12

32. SIGNAL PERFORMANCE MONITORING (FOR ANALYTICAL & PROCESS LAB EQUIPMENT)

3 2800 07 – 10/01 11 – 13/02 01 – 03/04 17 – 19/06 01 – 03/07 23 – 25/09 01 – 03/10 16 – 18/12

33. HYBRID VEHICLE TECHNOLOGY 3 2300 07 – 09/01 11 – 13/02 01 – 03/04 17 – 19/06 01 – 03/07 23 – 25/09 01 – 03/10 16 – 18/12

34. ELECTRICAL VEHICLE TECHNOLOGY 3 2500 07 – 09/01 11 – 13/02 01 – 03/04 17 – 19/06 01 – 03/07 23 – 25/09 01 – 03/10 16 – 18/12

35. DISTRIBUTED CONTROL SYSTEM : EMERSON DELTA V BASIC APPLICATION 3 2500 07 – 09/01 11 – 13/02 01 – 03/04 17 – 19/06 01 – 03/07 23 – 25/09 01 – 03/10 16 – 18/12

36. SCADA 3 2500 07 – 09/01 11 – 13/02 01 – 03/04 17 – 19/06 01 – 03/07 23 – 25/09 01 – 03/10 16 – 18/12

37. HYDRAULIC MAINTENANCE (PUMP AND COMPRESSOR) 3 2000 07 – 09/01 11 – 13/02 01 – 03/04 17 – 19/06 01 – 03/07 23 – 25/09 01 – 03/10 16 – 18/12


Page | 3 of 9

DATE – 2019 RENEWABLE ENERGY AND AUTOMATION TRAINING PROGRAM

DURATION (DAYS)



38. PHOTOVOLTAICS PRINCIPLES AND MATERIALS 3 2500 07 – 09/01 04 – 06/03 01 – 03/04 17 – 19/06 01 – 03/07 17 – 19/09 01 – 03/10 -

39. SOLAR PHOTOVOLTAICS ON GRID SYSTEM DESIGN 5 3000 14 – 18/01 11 – 15/03 08 – 12/04 24 – 28/06 08 – 12/07 23 – 27/09 07 – 11/10 16 – 20/12

DATE – 2019 ELECTRONICS SYSTEM &COMMUNICATION

TRAINING PROGRAM

DURATION (DAYS)



40. INDUSTRIAL PROJECT WITH VISUAL BASIC 3 1600 07 – 09/01 11 – 13/02 01 – 03/04 17 – 19/06 01 – 03/07 23 – 25/09 01 – 03/10 16 – 18/12

41. ARDUINO INTERFACING & APPLICATION SYSTEM 5 2500 07 – 11/01 11 – 15/02 01 – 05/04 17 – 21/06 01 – 05/07 23 – 27/09 07 – 11/10 16 – 20/12

42. HARDWARE DESCRIPTION LANGUAGE (VERILOG) BASED SYSTEM DESIGN & APPLICATION

4 2000 07 – 10/01 11 – 14/02 01 – 04/04 17 – 20/06 01 – 04/07 23 – 26/09 07 – 10/10 16 – 19/12

43. MICROCONTROLLER BASED SYSTEMS 3 1600 07 – 09/01 11 – 13/02 01 – 03/04 17 – 19/06 01 – 03/07 23 – 25/09 01 – 03/10 16 – 18/12

44. ORCAD PSPICE CIRCUIT SIMULATION AND ANALYSIS 4 2000 07 – 10/01 11 – 14/02 01 – 04/04 17 – 20/06 01 – 04/07 23 – 26/09 07 – 10/10 16 – 19/12


Page | 4 of 9

DATE – 2019 MOULD TECHNOLOGY TRAINING PROGRAM

DURATION (DAYS)



45. FUNDAMENTALS OF PLASTIC PROCESSING 2 1000 02 – 03/01 11 – 12/02 02 – 03/04 02 – 03/05 02 – 03/07 01 - 02/08 01 – 02/10 04 – 05/11

46. TROUBLESHOOTING FOR INJECTION MOULDING 2 1400 07 – 08/01 26 – 27/02 25 – 26/04 06 – 07/05 04 – 05/07 05 – 06/08 08 – 09/10

47. FUNDAMENTALS OF SCIENTIFIC INJECTION MOULDING PROCESS 3 2000 07 – 09/01 12 –14/02 09 – 11/04 07 – 09/05 09 – 11/07 06 – 08/08 01 – 03/10 04 – 06/11

48. ADVANCED SCIENTIFIC INJECTION MOULDING PROCESS 4 2400 14 – 17/01 19 – 22/02 16 – 19/04 14 – 17/05 16 – 19/07 13 – 16/08 08 – 11/10 12 – 15/11

49. FUNDAMENTALS OF MOULD TECHNOLOGY 3 1350 09 – 11/01 05 – 07/02 03 – 05/04 10 – 12/06 03 – 05/07 07 – 09/10

50. MOULD MAINTENANCE 3 1600 14 – 16/01 10 – 12/04 17 – 19/05 10 – 12/07 03 – 05/09 09 – 11/10 17 – 19/12

51. TWO PLATE MOULD DESIGN 3 1350 16 – 18/01 04 – 06/03 17 – 19/04 18 – 20/06 17 – 19/07 10 – 12/09 22 – 24/10 18 – 20/12

52. THREE PLATE MOULD DESIGN 3 1350 11 – 13/03 23 – 25/04 26 – 28/06 23 – 25/07 17 – 19/09 23 – 25/10

53. ADVANCED MOULD DESIGN 3 1600 22 – 24/01 18 – 20/03 16 – 18/04 24 – 26/05 17 – 19/07 11 – 13/09 09 – 11/10 17 – 19/12

54. PLASTIC PRODUCT ANALYSIS

3 1600 23 – 25/01 25 – 27/02 24 – 26/04 26 – 28/06 24 – 26/07 24 – 26/09 23 – 25/10 18 – 20/12

55. FAILURE ANALYSIS OF INJECTION MOLDED PLASTIC PARTS 2 2500 - 25 – 27/02 24 – 26/04 26 – 28/06 24 – 26/07 24 – 26/09 23 – 25/10 18 – 20/12 New


Page | 5 of 9

DATE – 2019 TOOL & DIE TECHNOLOGY TRAINING PROGRAM

DURATION (DAYS)



56. FUNDAMENTALS OF METAL STAMPING 3 1550 14 – 16/01 11-13/02 01 – 03/04 10 – 12/06 08 – 10/07 03 – 05/09 01 – 03/10 04 – 06/11

57. BENDING OPERATION AND BENDING DIES 2 1000 22 – 23/01 08 – 09/04 10 – 11/06 15 – 16/07 15 – 16/07 07 – 08/10 11 – 12/11

58. DIE CONSTRUCTION AND DESIGN 1 (BLANKING, PIERCING AND COMPOUND DIE)

5 2000 07 – 11/01 25-01/02 22 – 26/04 10 – 14/06 22 – 26/07 - 07 – 11/10 -

59. DIE CONSTRUCTION AND DESIGN 2 (DRAW DIE) 4 1750 - 04-07/03 08 – 11/04 29-01/08 14 – 17/10 18 – 21/11

60. DIE CONSTRUCTION AND DESIGN 3 (CUT AND CARRY PROGRESSIVE DIE)

5 2000 28 – 01/02 - - 04- 08/06 05 - 09/08 05 – 09 /08 14 - 18/10

61. DIE MAINTENANCE & PRESS MACHINE OPERATION 4 1750 05 – 08/03 06 – 09/05 04 - 07/06 19 - 22/08 08 – 11/10 25 – 28/11

62. 3D AUTOMOTIVE DIE DESIGN 10 4000 11 - 22/03 06 – 17/05 - 19 – 30/08 - 14 – 25/10 -

63. TOOLING FABRICATION (METAL STAMPING) 5 2000 14-18/1 25 - 29/03 - 24 – 28/06 - 23 – 27/09 - 02 – 06/12

64. GUIDED PROJECT – PROGRESSIVE DIE 5 2000 28 – 01/02- 18 – 22/02 15 – 19/04 17 – 21/06 - 23 – 27/09 21 – 25/10 16 – 20/12


Page | 6 of 9

DATE – 2019 CNC PRECISION TECHNOLOGY TRAINING PROGRAM

DURATION (DAYS)



65. BASIC CADCAM MILLING 3 1150 02 – 04/01 - 01 – 03/04 27 – 29/05 01 – 03/07 13 – 15/08 30 – 02/10 11 – 13/11

66. INTERMEDIATE CADCAM MILLING 3 1200 07 – 09/01 - 08 – 10/04 10 – 12 /06 03 – 05/07 02 – 04/10

67. ADVANCED CADCAM MILLING 3 1300 14 – 16/01 - 15 – 17/04 17 – 19/06 08 – 10/07 14 – 16/08 13 – 15/11

68. EXPERT CADCAM MILLING 3 1350 22 – 24/01 - 22 – 24/04 24 – 26/06 15 – 17/07 19 – 21/08 07 – 09/10

69. FUNDAMENTAL CNC MILLING FOR MANUFACTURING (ISO/HEIDENHEIN) 3 1200 - 04 – 06/03 02 – 04/05 17 – 19/07 09 – 11/10 18 – 20/12

70. INTERMEDIATE CNC MILLING FOR MANUFACTURING (ISO/HEIDENHEIN) 3 1300 - 06 – 08/03 01 – 03/04 22 – 24/07 21 – 23/08 14 – 16/10

71. ADVANCED CNC MILLING FOR MANUFACTURING (ISO/HEIDENHEIN) 3 1350 - 11 – 13/03 08 – 10/04 29 – 31/06 24 – 26/07 26 – 28/08 02 – 04/12

72. FUNDAMENTAL CNC TURNING FOR MANUFACTURING (ISO/CONVERSATIONAL SHOPTURN)

3 1200 28 – 30/01 - 12 – 14/06 29 – 31/07 28 – 30/08 16 – 18/10

73. INTERMEDIATE CNC TURNING FOR MANUFACTURING (ISO/CONVERSATIONAL SHOPTURN)

3 1300 - 18 – 20/03 15 – 17/04 31 – 02/08 03 – 05/09 21 – 23/10 04 – 06/12

74. ADVANCED CNC TURNING FOR MANUFACTURING ( ISO/CONVERSATIONAL SHOPTURN)

3 1350 - 25 – 27/03 19 – 21/06 10 – 12/09 23 – 25/10

75. FUNDAMENTAL CNC MILLING MULTI AXIS 3 1300 11 – 13/02 - 22 – 24/04 05 – 07/08 29 – 31/10 16 – 18/12

76. INTERMEDIATE CNC MILLING MULTI AXIS 3 1450 18 – 20/02 - 06 – 08/05 26 – 28 /06 17 – 19/09

77. ADVANCED CNC MILLING MULTI AXIS 3 1500 25 – 27/02 - 13 – 15/05 07 – 09/08 23 – 25/09 04 – 06/11 18 – 20/12

DATE – 2019 SHEET METAL FABRICATION AND PRODUCT DEVELOPMENT TRAINING PROGRAM

DURATION (DAYS)



78. SHEET METAL PRODUCT DESIGN 4 1750 08 – 11/01 - - 23 – 26/04 - 29 – 01/08 01 – 04/10 25 – 28/11

79. CNC 2D & 3D LASER CUTTING TECHNOLOGY 4 1800 - 11 – 14/02 16 – 19/04 - 01 – 04/07 - 07 – 10/10 -

80. CNC TURRET PUNCHING & BENDING TECHNOLOGY 4 1750 15 – 18/01 26 – 01/03 - 15 – 18/06 - 05 – 08/08 14 – 17/10 02 – 05/12

81. SHEET METAL FORMING & DEVELOPMENT TECHNOLOGY 4 1750 15 – 18/01 - 09 – 12/04 10 – 13/06 - 13 – 16/08 21 – 24/10 16 – 19/12

82. MATERIAL TREATMENT & FINISHING TECHNOLOGY 4 1800 - 05 – 08/03 07 – 10/05 - 15 – 18/07 - 04 – 07/11 -

83. SHEET METAL FORMING ANALYSIS (ENGINEERING ANALYSIS – SHEET METAL FORMABILITY)

4 1600 22 – 25/01 - 02 – 05/04 17 – 20/06 - 03 – 06/09 - 17 – 20/12

84. CAD CAM FOR SHEET METAL 4 1600 - 12 – 15/03 13 – 16/05 - 22 – 25/07 - 11 – 14/11 -

85. FLOW ABRASIVE WATER-JET TECHNOLOGY 2 1200 - 19 – 22/03 - 24 – 27/06 - 10 – 13/09 -


Page | 7 of 9

DATE – 2019 PRODUCT DESIGN AND DEVELOPMENT TRAINING PROGRAM

DURATION (DAYS)



86. ENGINEERING DRAWING & CAD 5 1100 07 – 11/01 - 01 – 05/04 - 08 – 12/07 - 30 – 04/10 -

87. CAD FUNDAMENTAL – AUTOCAD INVENTOR PRO 5 1100 14 – 18/01 04 – 08/03 15 – 19/04 06 – 10/05 - 26 – 30/08 - 18 – 22/11

88. 3-D MODELING 5 1100 28 – 01/02 - 08 – 12/04 - 15 – 19/07 - 07 – 11/10 -

89. PRODUCT CONCEPT & DESIGN DEVELOPMENT 3 850 - 11 – 13/03 - 13 – 15/05 - 03 – 05/09 14 – 16/10 -

90. MODEL MAKING TECHNIQUE 4 1100 11 – 14/02 - 23 – 26/04 - 22 – 25/07 - 21 – 24/10 -

91. ERGONOMICS 3 850 18 – 20/02 - 17 – 19/04 - 29 – 31/07 10 – 11/09 - 25 – 27/11

92. 3DS MAX FOR RENDERING & ANIMATION 4 1100 - 12 – 15/03 - 27 – 30/05 - 17 – 20/09 - 02 – 05/12

93. FINITE ELEMENT ANALYSIS WITH CAE (BEGINNER) 3 1400 25 – 27/02 - 03 – 05/04 - 05 – 07/08 - 29 – 31/10 -

94. FINITE ELEMENT ANALYSIS WITH CAE (INTERMEDIATE) 3 1450 - 11 – 13/03 - 10 – 12/06 - 23 – 25/09 -

95. PRODUCT DESIGN OPTIMIZATION WITH CAE 4 1500 - 18 – 21/03 - 17 – 20/06 - - 16 – 19/12

96. RAPID PROTOTYPE 4 1400 - 25 – 28/03 23 – 26/04 - 19 – 22/08 24 – 27/09 04 – 07/11

97. REVERSE ENGINEERING FOR PRODUCT DEVELOPMENT 4 1100 - - 24 – 27/06 - 11 – 14/11

98. DO IT RIGHT THE FIRST TIME (DRIFT) PLASTICS DESIGN

2 2500 25 – 27/02 25 – 28/03 23 – 26/04 24 – 27/06 19 – 22/08 24 – 27/09 11 – 14/11 16 – 19/12 New


Page | 8 of 9

DATE – 2019 MANUFACTURING TRAINING PROGRAM

DURATION (DAYS)



99. TURNING MACHINING TECHNOLOGY 3 1150 02 – 04/01 13 – 15/02 01 – 03/04 13 – 15/05 01 – 03/07 22 – 24/07 - 04 – 06/11

100. MILLING MACHINING TECHNOLOGY 3 1200 07 – 09/01 20 – 22/02 - 15 – 17/05 03 – 05/07 29 – 31/7 30 – 2/10 11 – 13/11

101. SURFACE GRINDING TECHNOLOGY 3 1150 14 – 16/01 25 – 27/02 08 – 10/04 27 – 29/05 05 – 07/08 - 18 – 20/11

102. MACHINE TOOL OPERATION 9 3450 14 – 24/01 - 15 – 25/04 - 08 – 10/07 19 – 29/08 07 – 09/10 -

103. BASIC INSPECTION AND MEASUREMENT 3 1200 22 – 24/01 04 – 06/03 22 – 24/04 29 – 31/05 10 – 12/07 26 – 28/08 14 – 16/10 25 – 27/11

104. COORDINATE MEASURING MACHINE (CMM) 4 1600 28 – 31/01 11 – 14/03 23 – 26/04 10 – 13/06 15 – 17/07 03 – 05/09 21 – 23/10 02 – 04/12

105. GEOMETRICAL DIMENSIONING AND TOLERANCING (GDT) 3 1250 11 – 13/02 28 – 20/03 06 – 08/05 17 – 19/6 07 – 19/07 10 – 12/09 29 – 31/10 16 – 18/12

EDUCATION & TRAINING OFFICE

DATE – 2019 TRAINING & DEVELOPMENT

TRAINING PROGRAM

DURATION (DAYS)


JANUARY - MARCH APRIL - JUNE JULY – SEPTEMBER OCTOBER - DECEMBER

106. PSMB TRAIN THE TRAINER PROGRAM (SMETAP) 5 2500 07 – 11/01 11 – 15/02 01 – 05/04 17 – 21/06 01 – 05/07 23 – 27/09 07 – 11/10 16 – 20/12

107. WRITING EFFECTIVE E-MAILS 5 2000 07 – 11/01 11 – 15/02 01 – 05/04 10 – 14/06 01 – 05/07 05 – 09/08 07 – 11/10 16 – 20/12

108. JOB APPLICATION SKILLS 9 3700 - 2 – 5/03 – 11 -

15/03 -

6 – 9/05 – 13

– 17/05 -

17 – 20/09 –

23 – 27/09 -

25 – 20/11 – 02 –

05/12

109. PROPOSAL WRITING AND PRESENTATION 5 2000 14 – 18/01 18 – 22/02 08 -12/04 17 – 21/06 08 – 12/07 19 – 23/08 14 – 18/10 04 – 08/11

110. REPORT WRITING AND PRESENTATION 5 2000 28/01 – 01/02 25/02 – 01/03 15 - 19/04 24 - 28/06 15 – 19/07 23 – 27/08 21 – 25/08 11 – 15/11


Page | 9 of 9

NOTES

Tailor-made programmes to suit the needs of individual companies can also be arranged.

GMI reserves the right to cancel or reschedule the above programmes.

For further inquiries and information, please contact these personnel:

Ts. Mr. Muhairi Jamil: 03-8921 9227 or 011-12274380 or 017-2185465 ([email protected])

Dr. Ts. Mr.Shamsuddin Man: 03-8921 9087 or 019-3291375 ([email protected])

Ms. Hasniza Ramli: 03-8921 9460 or 019 3559551 ([email protected])

Mr. Ravdarn Raman: 03 8921 9046 or 012 265 6041([email protected])

German-Malaysian Institute, Jalan Ilmiah,Taman Universiti,

43000 Kajang, Selangor Darul Ehsan

Tel: 03-8921 9000 / 03-8921 9191 (Hotline)

Fax: 8921 9003 URL: http://www.gmi.edu.my/short-courses/ Email: [email protected]

mailto:[email protected]




http://www.gmi.edu.my/short-courses/

Date post:	01-Mar-2022
Category:	Documents
Upload:	others
View:	3 times
Download:	0 times

SHORT TERM COURSE 2019 - GMI

Documents