9
Fenrir Construction Products 6-9 Holt Drive Toowoomba www.fenrir.sipowders.com.au 2016 Shotcrete Solutions
Fenrir Construction Products
6-9 Holt Drive Toowoomba
www.fenrir.sipowders.com.au
2016 Shotcrete
Solutions
SHOTCRETE CATALOGUE 2016
www.fenrir.sipowders.com.au
1 FENRIR
About Fenrir
Fenrir is the premier supplier of high quality construction materials for projects of all sizes. Established in 2016 as a subsidiary of
Si Powders (Est. 1994), Fenrir has an international presence through continual customer consultation and product development.
Customer satisfaction is Fenrir’s sole priority and the products reflect the highest of standards in quality, presentation and
supply. Fenrir’s commitment to providing solutions for customers is unmatched and our team provides exceptional technical
advice that value adds to any project. Through its network of professionals, first-class customer service and an extensive supply
chain, Fenrir provides seamless solutions.
CAPABILITIES
Fenrir offers a range of products and services for the construction industry including:
Unique product solutions for a range of applications
Materials testing such as compressive and flexural strengths, set times and shrinkage to relevant Australian Standards.
Personalised product development for project specific applications
Fenrir’s team consists of a range of professionals in management, operations, research and prides itself with continued
improvement.
Shotcretes
Anchors
Grouts
Renders
Repair mortars
Cement floors
Concrete accelerators
Microcements
Swimming pool renders
Water stops
Sewer repair
High yield grouts
Strata control
Roadways
Dust suppressants
Stockpile Protection
SHOTCRETE CATALOGUE 2016
www.fenrir.sipowders.com.au
2 FENRIR
Why use Cretespray?
Cretespray features are a range of high performance shotcrete solutions. Cretespray is a sprayed concrete by a wet or dry spray
method and can be reinforced by conventional methods such as steel mesh or by use of fibres Cretespray can be sprayed
vertically and overhead on a range of different surface types.
Cretespray was developed to meet industry requirements of high strength, increased cohesion, reduced wastage and better
finishes. These properties make Cretespray unique in the market and provide customers with peace of mind without the
premium price tag.
High Strength
Extreme durability
Highly impervious
High cohesion
Reduced wastage
Consistent to minimize on-site variations
Economical both during placement and continued lifecycle
Fenrir’s wide range of high performing shotcretes can be used in commercial, civil, building and industrial applications
FENRIR PRODUCT SUPPORT
Project specifications Expert product advice on the use of correct products for applications.
Supply Chain Management Fenrir is able to deliver on-time, every time with a network of logistic solutions.
Technical advice and support All products are fully supported by a team of professionals.
CAD Support Project specific CAD details and bespoke product details can be created.
Training Support and training offered for customers wishing to expand their knowledge on Fenrir Products
SHOTCRETE CATALOGUE 2016
www.fenrir.sipowders.com.au
3 FENRIR
Project Applications Fenrir Products
1 Tunnel Repair, Support & Finishing
CreteSpray© CreteSpray© HS
2 Tunnels and confined spaces CreteSpray© DS
3 Slope Stabilisation, erosion control, repair work
CreteSpray© CreteSpray© HS CreteSpray© DS
4 Tunnel/Slope Lining System RokSafe©
5 Pool construction CreteSpray©
CreteSpray© HS
6 Pool renders and interiors FenPool©
7 Shotcrete Accelerator FenAccel©
1
4
5 7
SHOTCRETE PRODUCT OVERVIEW
1
5
6
2
3 4
7
7
SHOTCRETE CATALOGUE 2016
www.fenrir.sipowders.com.au
4 FENRIR
Cementitious Grouts
Application requirements
Typical properties
Cementitious Grouts
Usage
Wet or dry shotcrete application requiring high compressive strengths and minimal rebound
High strengths, predictable strength development.
CreteSpray© Industry standard shotcrete with minimal rebound.
CreteSpray© HS High performance shotcrete with early strength development and high late strengths.
CreteSpray© SR Based on a patented process this version features a sulphate resistant cement core.
CreteSpray© LH A slow-set, low heat shotcrete for applications where minimal heat generation is required.
CreteSpray© DS Dust suppressed shotcrete for confined areas with high strengths and excellent cohesion.
Shotcrete Additives
Application requirements
Typical properties
Cementitious Grouts
Usage
Dependant on application, product and project.
Properties will depend on application, product and project.
FenAccel©
High performance powder accelerator for on-site mixing.
FenAccel© IBC High performance premixed liquid accelerator.
PRODUCT SELECTION GUIDE
SHOTCRETE CATALOGUE 2016
www.fenrir.sipowders.com.au
5 FENRIR
1. Planning Planning is the most crucial part for a successful shotcrete project. This involves enough material, equipment and labour for a continuous operation. Other factors such as working temperatures, material wastage, water and formwork should also be considered.
2. Preparation Preparation involves removing any dirt, debris, corrosion and other contaminants from the spray surface including any steel reinforcement.
3. Saturation To minimize water loss the area shall be saturated with potable water for a minimum of 7 hours prior to application.
4. Mixing The mixing method will depend on wet or dry application but typically involves mixing CreteSpray with 1.9-2.5 litres of potable water per 20 kg bag
5. Spraying Use sound shotcrete spraying techniques to probably place and compact the shotcrete. A thorough quality assurance process is recommended to avoid poor compaction and finishes.
APPLICATION GUIDE
SHOTCRETE CATALOGUE 2016
www.fenrir.sipowders.com.au
6 FENRIR
6. Curing Proper curing and protection is crucial to avoid drying shrinkage. Moist curing is recommended.
7. Finishing
The finished product can be left in an “of-the-gun-finish” or trowelled to a smooth finish.
SHOTCRETE CATALOGUE 2016
www.fenrir.sipowders.com.au
7 FENRIR
Fenrir provides a whole range of bespoke and exciting construction products.
Find out more from our other brochures including:
SHOTCRETE CATALOGUE 2016
www.fenrir.sipowders.com.au
8 FENRIR
Contact Us
6 Holt Drive, Torrington, Queensland 4350
Ph: (07) 4633 7909
Fax: (07) 4633 7897
www.sipowders.com.au
Managing Director – Michael Archer
Phone: (07) 4633 2212
Mobile: (04) 2722 0197
Email: [email protected]
Sales
Mobile: (04) 2722 0197
Email: [email protected]
Disclaimer:
All information, including technical specifications are current as of date of printing. Please note that products may be
discontinued or changed without notice. Please contact us for up-to-date information regarding any products. © Fenrir 2016
