1
FEATURES SPECIFICATIONS 800-729-6726 | NASSCOINC.COM Distributed exclusively by Nassco, Inc. 5365 S. Moorland Rd. New Berlin, WI 53151 SKU UOM CASE PACK N-02006 Quart 12/Cs. Color Scent pH Viscosity Clear Fresh & Clean 1.5 - 2.5 Thick SHOWER & TILE CLEANER Foaming action removes soap scum and hard water scale from walls, fixtures, grout Foamy Shower & Tile Cleaner is a high foaming acidic cleaner that fast and efficiently removes soap residue, limescale, and other hard water deposits from ceramic walls, fixtures and even grout. High foam clings to fixtures and vertical surfaces for improved cleaning action. Use in showers, restrooms, bowls, urinals, on A/C fins, sinks, faucets, and drinking fountains. Use on chrome, stainless steel, fiberglass, grout, glass and porcelain surfaces. • High foaming, clings to vertical surfaces • Dissolves soap scum, hard water scale and deposits • Brightens fixtures, cleans grout DIRECTIONS Read entire label and SDS for proper use, handling and storage before using this product. Use in well-ventilated areas on acid-safe surfaces. Do not mix with ammonia or bleach. Wear appropriate personal protective equipment including gloves and glasses. Test surface for compatibility prior to using. Recommended dilution ratios of cleaner to water are as follows: Light scale and soil: Dilute Foamy Shower & Tile Cleaner 1:20 (6.5 oz./gal. water) up to 1:10 (13 oz./gal. water) Heavy scale and soil: Use at full strength or dilute with water up to 1:4 (32 oz./gal. water) 1. Apply proper use solution and liberally apply to surface with trigger sprayer or sponge 2. Allow contact time to loosen soils, then scrub with synthetic pad 3. Rinse with clean water 4. Repeat if necessary PRO SERIES PRO SERIES
