PLOT NO – B 63, BILESHWAR IND. ESTATE, OPP.-G.V.M.M, NR. KATHWADA, G.I.D.C, S.P RING ROAD. ODHAV, AHMADABAD – 382415, (M) 9426501853,[email protected], [email protected]Minimal Process Times: Tumbler machine, which is takes just minutes, instead of hours, to dry material Fully automatic control concept: Machine inside temperature & rotating speed are continuously monitored by sensors and pyrometers. Low maintenance: Its robust and reliable construction the rotating drum needs minimal maintenance. Machine is designed for the continuous operation. Quick Change-over and Shutdown Time: It’s takes only 10-15 minute to dry the gloves instead of 30 – 40 minute. Stainless steel rotary drum with internal baffles create tumbling action to expose all surfaces to heating air. Faster Start-up: Advanced heating element required less time to maintain temperature. Easy Maintenance & cleaning: All components of the machine are standard & easily accessible through large doors and the separately extractable drum unit, which makes it possible to carry out all necessary maintenance and cleaning tasks quickly. Lower space requirements: Advance and compact design which is not required to cyclone filter the powers which is remove during the process. Application:- Main application of the machine is dry the hand gloves. Which is remove the moisture and powder form the gloves. Main purpose of the machine is remove the moisture form products which is mostly used in 1) Pharmaceutical applications like as dry the hand gloves etc. 2) Food industries are use the remove the moisture form food Products Shree Virkrupa Enginerring
Transcript
PLOT NO – B 63, BILESHWAR IND. ESTATE, OPP.-G.V.M.M, NR. KATHWADA, G.I.D.C, S.P RING ROAD. ODHAV,
Minimal Process Times: Tumbler machine, which is takes just minutes, instead of hours, to dry material Fully automatic control concept: Machine inside temperature & rotating speed are continuously monitored by sensors and pyrometers. Low maintenance: Its robust and reliable construction the rotating drum needs minimal maintenance. Machine is designed for the continuous operation. Quick Change-over and Shutdown Time: It’s takes only 10-15 minute to dry the gloves instead of 30 – 40 minute.
Stainless steel rotary drum with internal baffles create tumbling action to expose all surfaces to heating air. Faster Start-up: Advanced heating element required less time to maintain temperature. Easy Maintenance & cleaning: All components of the machine are standard & easily accessible through large doors and the separately extractable drum unit, which makes it possible to carry out all necessary maintenance and cleaning tasks quickly. Lower space requirements: Advance and compact design which is not required to cyclone filter the powers which is remove during the process.
Application:- Main application of the machine is dry the hand gloves. Which is remove the moisture and powder form the gloves. Main purpose of the machine is remove the moisture form products which is mostly used in 1) Pharmaceutical applications like as dry the hand gloves etc. 2) Food industries are use the remove the moisture form food Products
Shree Virkrupa Enginerring
PLOT NO – B 63, BILESHWAR IND. ESTATE, OPP.-G.V.M.M, NR. KATHWADA, G.I.D.C, S.P RING ROAD. ODHAV,
The main function of this machine is removing the moisture/powders form the product. The rotating drum is mounted in the machine which is rotate clockwise direction in nominal speed. Drum is connected with motor with pulley and sprocket chain arrangement. There are electric heaters are available to maintain the temperature level in the machine. All electric heaters are controlled by Panel. In the panel we can adjust the temperature limits for the electric heater. A Cross-Flow Blower is mounted on the top of machine which is continuously & equally blow the air on rotating drum. The air is passing through electric heater. Cross-Flow Blower is very compact and generates very low noise level compare to centrifugal blower. As per the requirement different size of cross-flow blowers are available.
How the Tumbler Machine Works
Stainless steel rotary drum with internal baffles create tumbling action to expose all surfaces to heating air. A machine is totally controlled by the control penal. Auto cutoff function for the heater and overload alarm functions are available. At the bottom of the machine duct are available with filter cloth which is used to hold the extra powder/material which is removed form the material. There is no requirement of cyclone or other equipments for the filter the powders from air.
There is no need for high volume, bulky desiccant dryers, centrifugal blowers and cyclone that are required with conventional
dryer systems.
Material: Available in MS & SS
For the continuous operation hopper and collector with spiral screw arrangements are available as per the shown in the fig. for the Capacity and dimension please contact factory. In this model instead of electric heater we can provide the infrared bulb system which is saves almost 45% more energy compare to the electric heater. For more details please contact factory. Dimension, Capacity and output very as per customer requirements.
