Shri Krishan Institute of Engineering and Technology
KURUKSHETRA
MANDATORY
DISCLOSURE
1 Signature of Authorized Signatory with date
SHRI KRISHAN INSTITUTE OF ENGINEERNG AND TECHNOLOGY
KURUKSHETRA
I NAME OF THE INSTITUTION
Shri Krishan Institute of Engineering & Technology, Kurukshetra.
II NAME & ADDRESS OF THE DIRECTOR/PRINCIPAL
Dr.Chitranjan Gaur, Principal
III NAME OF THE AFFILIATING UNIVERSITY
Kurukshetra University, Kurukshetra
IV GOVERNANCE
Members of the Board and their brief background
Sh.Sanjay Bansal-Chairman - Educationist
Smt.Bimal Bansal-Cahier - Educationist
Smt.Seema Bansal,Secretary -Educationist
Sh.Rajan Goel,Trustee -Educationist & Businessman
Sh.Suman Goel,Trustee -Educationist
Smt.Sindhu Gupta,Trustee -Educationist
Smt.Anshu Gupta,Trustee -Educationist
Members of Academic Advisory Body
Prof.I.J.S.Lamba, Retired Prof.Civil Engg.,NITK
Dr.Dinesh Khanduja, Prof.Mech.Engg.,NITK
Dr.Raj Kumar, Director & Prof.Mech Engg.,GGSS, Dinarpur
Dr.K.S.Kasana, Prof.Mech.Engg.NITK
Dr.I.M.Talwar, Prof.Computer Engg.,NITK
Dr.S.N.Chaturvedi, Prof. ECE, KUK
Dr.G.L.Khatri, Prof. Physics,
Frequency of the Board meetings and Academic Advisory Body
Meeting of the Board takes place once in a year
Meeting of the Academic Advisory Body takes place once in a Semester
2 Signature of Authorized Signatory with date
Organizational chart and processes
Managing Director Director
Principal
Nature and Extent of involvement of faculty and students in academic
affairs/improvements
Ours faculty being well qualified, fully devoted & highly inspired in imparting knowledge to the
students through personal interaction by holding regular seminars and regular classes through
innovation & pro-active approach.
Mechanism/Norms & Procedure for democratic/good governance
This institute has a working frame work of administration & Governance as a Mechanism to
inculcate a fine sense of discipline & academic receptivity in the students.
Student Feedback on Institutional Governance/faculty performance
This institute has a regular system of to appraise the performance of the faculty & the
students in general by having a weekly meeting of senior faculty & by monthly meeting of
students representatives to have a feedback in the matter.
Grievance redressal mechanism for faculty, staff and students
This institute is having a great redressal Mechanism for faculty & students to strength the
administration process
SKET
Chairman, BOG
HOD
Comp
HOD
,ECE HOD,
Mech
HOD
App sc. Regist
rar
HOD
IT HOD
Civil
HOD
MBA
3 Signature of Authorized Signatory with date
V PROGRAMME
Name of the Programmes approved by the AICTE
B.Tech 4years degree course
M.Teh 2 years degreecourse
Name of the Programmes accredited by the AICTE
No, under process
UG Course (B.Tech)
* Name of the Course Intake Duration
Computer Engineering 120 4 years
Electronics & Comm. Engg. 120 4 years
Mechanical Engineering 120 4 years
Information Technology 60 4 years
Civil Engineering 60 4 years
UG Course(BBA) 30 2 years
(Approved by Kurukshetra University)
PG Courses
MBA 60 2 years
M.Tech in CSE 18 2 years
M.Tech in ECE 18 2 years
M.Tech in Mech 18 2 years
Cut off mark/rank for admission during the last three years
Session 2010-11 : Cut off Rank- 1055018
Session 2011-12 : Cut off Rank- 1027725
Session 2012-13 : Cut off Rank- 975420
4 Signature of Authorized Signatory with date
Fee (B.Tech) :
Tuition Fee : 38300-00
Development fund : 8900-00
Students fund : 1500-00
Caution Money : 2000-00
* University fees/funds extra
Placement Facilities:
Full fledged & Experienced Training & Placement officer for the last about two year has
been appointed. Many reputed companies have visited this college on a number of occasions
to select final year students for placement in their companies. Our TPO is making every
possible endeavor to have several trips to visit the companies for inviting them to visit our
college for the placement of budding engineers.
Besides above, approximately 300 students were also called by the different
companies/organizations in their own offices for written selection tests & interviews.
Senior Faculty in the Institution
Name Designation Photograph
Dr.Chitranjan Gaur Principal
Brig.V.K.Panday Director
Sh.Abhishek Aggarwal Academic Co-ordinator
B.,Tech.,M.Tech
5 Signature of Authorized Signatory with date
Sh.Parveen Sharma HOD Computer Engineering
B.Tech.,M.Tech
Sh.Parshant Aggarwal HOD Electronics &
Comm.Engg.B.Tech.,M.Tech
Sh.Gurcharan Singh HOD Civil Engineering
B.Tech,M.Tech
Sh.Ravinder Chaudhary HOD Mechanical
Engineering B.Tech.,M.Tech
Mrs.Upasana Sood HOD Information
Technology B.E.,M.Tech
Dr.D.D.Sharma HOD Applied Science &
Humanties ,M.Sc.,Ph.D
Sh.Vikas Mishra HOD Deptt.of Management
MBA
VIII FEE
* Details of fee, as approved by state fee committee , for the Institution.
Tuition fee 38300
Development fund 8900
Students fund 1500
Caution Money 2000 ( Refundable )
* Time Schedule for payment of fee for the entire programme
Payment of fee is semester-wise
6 Signature of Authorized Signatory with date
* Tuition fee waivers- Session 2012-13
Mechanical Engineering -2
Electronics & Comm.Engg.-1
Number of Scholarship offered by the Institute, duration and amount
* Criteria for fee waivers/Scholarship
As per Govt./AICTE guidelines.
IX ADMISSION
* Number of seats sanctioned with the year of approval
UNDERGRADUATE COURSE
Branch Intake Year of approval
B.Tech in Computer Engineering 120 2012-13
B.Tech in Electronics & Comm. Engineering 120 2012-13
B.Tech in Mechanical Engineering 120 2012-13
B.Tech in Information Technology 60 2012-13
B.Tech in Civil Engineering 60 2012-13
BBA ( Approved by KUK) 30 2012-13
POST GRADUATE COURSES
M.Tech in Computer Engineering 18 2012-13
M.Tech in Electronics & Comm.Engg. 18 2012-13
M.Tech in Mechanical Engineering 18 2012-13
MBA 60 2012-13
Number of students admitted under various categories each year in the last three years:
UG Courses 2010-11 2011-12 2012-13
B.Tech in Computer Engg. 61+33* 33**+53* 21+15*
B.Tech in Electronics & Comm. Engg, 113+15* 52+34* 24+10*
B.Tech in Mechanical Engineering 62+6* 71+12* 95+36*
B.Tech in Information Technology 15+8* 00+3* 00+00
B.Tech in Civil Engineering 52+7* 49+20* 18+12*
BBA - - 14
PG Courses
M.Tech in Computer Engg. - 18 18
M.Tech in Electronics & Comm.Engg. - - 18
M.Tech in Mechanical Engineering - - 09
MBA 09 08 10
7 Signature of Authorized Signatory with date
Number of applications received for admission under Management Quota and number
admitted:
Admission Status Session 2012-13
CO ECE Mech Civil IT MBA
No. of Applications received for Management Quota 25%/
Admitted on first come first serve basis Left out/Vacant seats
X ADMISSION PROCEDURE
As per guidelines issued from time to time by Technical Education Deptt, Govt. of Haryana
XI CRITERIA AND WEIGHTAGES FOR ADMISSION
Admission is made through online counselling conducted by Technical Education Deptt.,
Haryana
XIII LIST OF APPLICANTS
Admission is made through online counseling conducted by Technical Education Deptt.,
Haryana
XIV RESULT OF ADMISSION UNDER MANAGEMENT SEATS/VACANT SEATS
-NA-
* Score of the individual candidates admitted arranged in order of merit.
- NA -
XV INFORMATION ON INFRASTRUCTURE AND OTHER RESOURCES AVAILABLE
8 Signature of Authorized Signatory with date
LIBRARY
NUMBER OF LIBRARY BOOKS/TITLES/JOURNALS/PERIODICALS
Discipline Books Titles Journals/Periodicals
S.No Course(s)
Number of
titles of the
books
Number of volumes
02Journals
1 Computer /IT 485 6762 02
2 Information Technology 135 1618
3
Electronics & Comm.
Engg.
553 6947 01
3 Mechanical Engineering 423 5145 02
4 Civil Engineering 92 1136 01
4 Applied Sc.& Humanities 265 4139 02
5 Others 124 315
Total: 2077 26062 08
6 MBA 163 1082 02
* LIST OF ONLINE NATIONAL/INTERNATIONAL JOURNALS SUBSCRIBED.
E-Library facilities
9 Signature of Authorized Signatory with date
DETAILS OF MAJOR EQUIPMENTS IN APPLIED SCIENCE LABS
PHYSICS LAB-103 E.
1. Newton Rings set
2. Spectrometers
3. Polari-meters
4. Post office box
5. High Resistance apparatus
6. Low resistance apparatus
7. Sono-Meter set for frequency of AC main,
8. Galvanometers
9. Voltmeters
10. Ammeters
11. Resistance Boxes, Rheostat, Key
12. Lenses etc.
13. De Sauty’s set
14. Rheostats
15. One, two way keys PHYSICS LAB-104E
1. Hall effect setup,
2. Plancks Contanst Apparatus
3. Four probe set up
4. Richardson equation set up
5. V-I characteristics set up
6. Stewart & Gee’s apparatus
7. Temperature coeffuent of resistance of platium
8. Flashing and quenching apparatus,
9. I.P. of Argon by thyration
10. Thermo Couple .
11. Velocity of ultrasonic apparatus CHEMISTRY LAB
1. Red Wood viscometer No.1
2. Red wood viscometer No.2
3. Pensky Martin Apparatus
4. Abels Flash Point Apparatus
5. Physical balances
6. Melting point determination apparatus
7. Water Bath equipment
8. Ion Exchanger for distilled water
9. Electric oven
10. Models
11. Digital weighing balance
12. Conducto meter
14. PH Meter
15. Distillation set
16. Heating Mantles
17. Vacuum pumps
18. Kipps apparatus
10 Signature of Authorized Signatory with date
ELECTRONICS & COMM.ENGG.LABS
1. Digital Electronics lab 1. C.R.O.
2. Function Generator
3. Multi-meters
4. Kits
2. Computer lab 1. Pentium IV
2. CPLD,FPGA Boards
3. Universal Board
4. XILINUXISE Software
5. MAT lab Software
6. Laser Printer
7. Dot Matrix Printer
3. Microprocessor and Audio Visual 1. 8085 and 8086 up Boards
Lab 2. Inter facing cards
3. Colour TV Demonstration Board
4. VCD Demonstration Board 5. Tape recorder/player 6. Demonstrator
7. 8051 Application Board 4. Design and Project lab 1. CRO
2. Multi-meters
3. Function Generators
4. Kits, Various Components
5. Universal IC programmer
5. EEE lab 1. CRO, DSO
2. Multi-meters
3. Function Generators
4. Kits
6. Communication lab 1. Communication kits
2. CRO
3. Power Supply
4. RFID kit
5. Bluetooth kit
6. GSM Board
7. Electrical Technology/ 1. Motors
Measurement lab 2. Generators
3. Transformer, kits
4. Measuring Instruments
11 Signature of Authorized Signatory with date
MECHANICAL ENGINEERING LABS
Name Major Equipment
Workshop/Production Tech. lab 1. Welding M/c
2. Lathe
2. Shaper
3. Milling Machine
4. CNC Machine
5. Drilling Machine
6. Power Hacksaw
7. Grinder Pedestal
Fluid Mechanics 1. Meta centric height apparatus
2. Bernoulli theorem apparatus
3. Orifice and Mouth Piece apparatus
4. Apparatus for determination of losses in
pipe and fittings
5. Notch apparatus
6. Venture meter and Orifice
apparatus
7. Impact of jet apparatus
8. Reynolds number apparatus
Strength of Material lab 1. Universal Testing Machine
2. Apparatus of Pendulum impact testing
machine
3 Apparatus of torsion testing machine
4. Apparatus of Erickson cupping machine
5. Fatique Testing Machine
6. Hardness Testing Machine
Kinematics of Machine and Dynamics of Machine
1. Closed coil helical spring apparatus
2. Plain friction apparatus
3. Horizontal shaft apparatus
4. Screw jack apparatus
5. Cam analysis apparatus
6. Belt friction apparatus
7. Fly wheel and axle apparatus
8. Whirling of shaft demonstrator
9. Motorized gyroscope
10. Balancing apparatus
12 Signature of Authorized Signatory with date
11. Epicyclic Gear train apparatus
12. Corli’s component of acceleration
13. Bell Crank Lever apparatus
14. Whitworth Quick Return Mechanism
15. Reaprocating Engine Mechanism
16. Oscillating cylinder Mechanism
17. Plate clutch assembly Model
18. Various Brabe Models
19 Various Governor Models
Thermodynamics/Elements of Mech. Engg.
Models
1. Babcock & Wilcox Boiler
2. Boiler Cochran
3. Lancashire boiler
4. Diesel Engine-4 stroke Model
5. Petrol Engine- 4 stroke Model
6. Diesel Engine- 2 stroke Model
7. Petrol Engine- 2 stroke Model
8. Green Economizer
9. Surface super heater
10. Surface steam condenses
11. Nestler oil fired boiler
12. Jet steam condenser
13. Steam Engine Model
14. Spring loaded safety valve
15. Lever safety valve
16. Feed check valve Model
17. Rotary pump Model
18. Pressure gauge
19. Dead Wt. safety valve
Fluid Machine 1. Reciprocating pump
2. Pelton wheel turbine
3. Francis turbine
4. Centrifugal pump
5. Hydraulic ram
6. Gear Pump
7. Kaplan Turbine
13 Signature of Authorized Signatory with date
Heat Transfer
1. Natural free convection
2. Two phase heat transfer
3. Emissivity measurement
4. Conduction through composite wall
5. Pin fin natural and forced convection
apparatus
6. Heat conduction apparatus
7. Parallel and counter flow double pipe
heat exchanger apparatus
Refrigeration and Air conditions 1. Mechanical Heat pump apparatus
2. Air and water heat pump apparatus
3. Ice plant apparatus
4. Water cooling tower apparatus
5. Air conditioning test rig apparatus
6. Sling Psychro meter apparatus
7. Water cooler test rig apparatus
8. Experimental air washer system App.
9. Vapour Compressor Trainer
10. Cut way model of controls
11. open Type Reciprocating Compressor
Model
12. Rotary type compressor Model
Computer Aided Design lab
1. 22 Computer systems
2. Laser printer
3. Auto desk inventor 10 software
4. MSDN- AA pack
Tribology and Mechanical Vibration
1. Universal vibration apparatus
2. Single/double rotor shaft system
3. Journal Bearing apparatus
4. Simple & compound Pendulum
apparatus
Thermal Engineering 1. Hydraulic Brake Model
2. Diesel Fuel pump Model
3. Cooling Tower Model
4. Gas Turbine Model
5. Wenkel Rotary engine
6. Carter Carburetor
7. S V Carburetor
8. Zenith Carburetor
9. Solex Carburetor
10. Centrifugal Blower Test Rig
14 Signature of Authorized Signatory with date
11. Cylinder four stroke Diesel Engine test rig
12. Multicylinder four stroke petrolengine test
rig.
13. 4-stroke single cylinder diesel engine cut
section model
14. Comshaft lubrication system
Measurement 1. Strain measurement tutor
2. Linear displacement measurement tutor
3. Water level measurement tutor
4. Speed measurement tutor
5. RTD and thermocouple tutor
6. Load measurement tutor
7. Pressure measurement tutor
8. Torque measurement tutor
9. Potentiometer sensor for long range
msr.
10. Light measurement tutor
11. RTD
15 Signature of Authorized Signatory with date
CIVIL ENGINEERING DEPARTMENT
Structure Lab
1. Clerk Maxwell
2 Column & Struts
3 Elastic Properties Beam
4 Three Hinged Arch
5. Compression Testing Machine
6 Hammer ½ Pound,
7. Hammer 2 Pound
8. Hand Saw Blade 1
9. Pipe Rench = 14”, Pipe Rench = 18”
10 Hand Sew Framer
11 Screw Driver
12 Figical Balance
Soil & Foundation lab
1 Vicat’s Needle Apparatus
2 Electric Heated Oven
3 Triaxial Test Apparatus
4 Direct Sheelt Apparatus
5 Unconfined Compression App.
6 Plastic Limit Apparatus
7 Set Of Fine And Corers Rives
8 Weighing Balance
9 Psychomotor
16 Signature of Authorized Signatory with date
Surveying lab
1 Meaning Chain 30 M Length
2 Surveyour Compass
3 Prismatic Compass
4 Cross - Staff
5 Optical Square
6 Ranging Roll
7 Leveling Staff
8 Signals With Plumb Bob,
9 Signal Station With Triangular
10 Iron Disc With Nuts Bolt.
11 Dumpy Level
12 Measuring Tape
13 Survey Umbrella
14 Tilting Level
15 Trasit Theodolite
16 Alidade
17 Spring Balance
18 Steel Tape
19 Plane Tape
20 Digital Theodalite
21 Trough Compass
22 Tangent Clinometers
LIST OF EXPERIMENTAL SETUP
We follow the syllabi of Kurukshetra University Kurukshetra to which this institute is affiliated.
17 Signature of Authorized Signatory with date
COMPUTING FACILTIES
* Number and configuration of systems
590 * Total number of systems connected by LAN
590
* Total number of systems connected to WAN
590
* Internet bandwidth
10 mpbs
* Major Software packages available
System Software-
Operating Systems
1. Window 98(Second Edition) :
2. Red Hat Linux 7.2 : Open Source
3. Windows NT Server 4.0 :
4. Window XP(Professional) : MSDN AA(unlimited users)
5. Windows Advanced Server : MSDN AA
6. Window 2000 Server : MSDN AA
Server Family
7. Microsoft SQL Server : MSDN AA
8. Microsoft Exchange Server : MSDN AA
9. Microsoft Server 2003 : MSDN AA
Application Software
Microsoft Office : 021-06283(VERSION 2003)
Office 2003 win 32: office 2003 suite :CQDV3-9DTIM-7MKCV-4DFRV-8PQHQ
Office XP suite: CHXVT-JQXDT-8BT4D-8KJ66-FGKFT
Antivirus Norton Antivirus version 2001
Norton Antivirus corporate Edition : Version 9.0
Mcafee
Data Base Management System Oracle 9i ( 05 users)
Oracle 10G Std Edition : 15+5(Windows and Linux Based)
( 4 years)
Web Based Design Studio
18 Signature of Authorized Signatory with date
Macromedia Studio ( Educational Version) Flash 5.0 Dream-weaver 4.0 Freehand 10.0 Firework 10.0
Compiler Turbo C++ Suite : Enterprises Edition
C++3.0 : For DOS
C++4.5 : For Window
C++ : Builder
Boroland Turbo C/C++ : 20 User License
MSDN Softwares: Visual Studio 6.0 Version 2005 ( with Service pack-6)
Special purpose facilities available Working hours from 9 AM to 10 PM, * Seminar Halls equipped with LCD Projector.
Games & Sports Facilities
The Institute provides adequate infrastructure of games and students are encouraged to participate in
various sports activities. The Institute organizes the athletic meet every year under the supervision of
its Director of Physical Education. Our students have also won several medals & prizes in sports at
the State, National and Inter university level.
Indoors game facilities are also available in the campus of the institution.
Gymnasium facilities have also been provided the students in the campus.
Extra Curriculum Activities
These activities are aimed at honing the skills of students by focusing on the development of the
individual’s professional and personal growth. Students at SKIET are provided with ample
opportunities to let out their creative energies and develop skills through sportive events, literary &
cultural events, technical events etc. Students are also encouraged to participate in various inter-
college competitions and activities. Our students have proved their fine mettle by winning prizes &
award in cultural festivals, technical symposia, debates etc. at other engineering colleges of Haryana
and even in other states of the country also. There are five official student societies namely NEEV,
SKIMECH, MANTHAN, SANKALP & THE GURU, active in the institute. These societies
organize and support a variety of extra curricular & co-curricular activities. The institute organizes
educational tours for the students to the places of technological importance.
Soft Skill Development facilities
The Institute is imparting Soft skill development facility to the students by way of regular
class of group discussion & seminar and periodic interval and is also having audio & video
19 Signature of Authorized Signatory with date
aids to help the students to refine & better their communication skills through CD’s & projector
etc. The regular seminars are held to improve the Students communication skills of Skill .
20 Signature of Authorized Signatory with date
DETAILS OF LABS & WORKSHOPS
Main Building
Ground Floor
Chemistry lab = 140.00
Electrical lab = 105.00 = 245.00 = 245.00
First Floor
Physics labs = 310.00
DSP lab = 72.00 = 382.00 = 382.00
Second Floor
Electronics Design lab = 132.00
Communication lab = 105.00
Linear Integrated Circuit = 65.00
Microprocessor lab = 72.00
Basic Electronics lab = 65.00 = 439.00 = 439.00
Mechanical Block
Ground Floor
Thermal Engg. lab = 91.00
RAC lab = 91.00
Measurement lab = 91.00 = 273.00 = 273.00
First Floor
H.T. lab = 110.00
THD lab = 110.00
KOM lab = 110.00
CAD lab = 110.00 = 440.00 = 440.00
Second floor
Tribology lab = 110.00
Three labs 25 sq.m.each = 75.00 = 185.00 = 185.00
SOM lab = 140.00
Fluid Machine = 90.00
HM lab = 140.00 = 370.00 = 370.00
Workshops = 990.00 = 990.00 = 990.00 (shed)
Computer Block
Computer Centre = 430.00
Open Resource lab = 98.00
NET lab = 42.00 = 570.00 = 570.00 IT
Ground floor
Lab-I(existing cse) = 150.00.
Lab-II = 100.00
Lab-III(existing Sem.) = 138.00 = 388.00 = 388
Total: 4312.00 Sq.m. (Approx.)
21 Signature of Authorized Signatory with date
* Number of Drawing Halls and size of each
Number of Drawing Hall - 01
Size -.220 Sq.m( Approx.)
Number of Computer Centers with capacity of each
Number of Computer Centers - 01
Computer Labs - 07
Seating Capacity -140(approx)
For B.Tech classes
Total Built up Area for existing 1350 intake 16024 Sq. m(App.) For MBA
Total Built up Area for existing 110 intake 1315 Sq. m(App.)
CENTRAL EXAMINATION FACILITY, NUMBER OF ROOMS AND CAPACITY OF
EACH.
Number of Rooms for central examination (Sessional) – 21
Capacity of each - 60 to 70 Students
Curricula and syllabi for each of the programs as approved by the University.
We follow the syllabi of Kurukshetra University, Kurukshetra to which this institute is
affiliated
Academic Calendar of the University
We follow Academic Calendar of Kurukshetra University, Kurukshetra
Time Table
Time Table is put on the Notice Board before the commencement of the semester
Teaching load of each faculty
Professor 10-12
Asstt.Prof. 12-15
Lecturer 16-18
*Internal continuous evaluation system and place Class Test (Sessional) 40%
Attendance 40%
General behavior & 20%
Class work
Students assessment of faculty system in place
We have a system of regular feed back from the students to appraise the teaching efficiency
and innovation of the individual teachers. We have never received any complaint uptilL now
regarding any teaching deficiency/negligence from any student. The university result is also
another parameter to judge the teacher’s performance.
22 Signature of Authorized Signatory with date