Renowned for WELDING, POSITIONING & HANDLING EQUIPMENTS SINCE 1995Rotators : Positioners : Column & Boom Manipulators : Hardfacing/Cladding Wear Plate Mfg. Systems :
Transfer Trolleys : Pugmill : Screw Conveyors & Custom Built SPM as per Requirements.
SHRI RAM TRANSMISSIONS
www.shriramtransmissions.com
SHRI RAM TRANSMISSIONS
Our Design Team has vast experience in product design & understanding customer requirements for practical and reliable equipments keeping in safety in mind. Our team can cope-up with all solutions may it be single product or turnkey project. As a manufacturer we have in-house design team to provide cost effective solutions.
SHRI RAM TRANSMISSIONS (SRT), Pune started its journey way back in 1995. The first milestone achieved by the company was a 100T Self Aligning Welding Rotator being successfully manufactured & commissioned. The firm was started by technically qualified persons who had worked in Advani Oerlicon Ltd (now known as Ador Limited) – Pune in their Advance Product Research Division & have exposure to more than 400 units i.e. heavy fabrication units, ship yards, chemical units, railways, fertilizer units, motor & compressor units, automobile industries, process industries, cement industries, wind mill industries, Govt. public sectors, Welding industries.
About Us
WE OFFER WIDE RANGE OF
Self Centring Rotators, SCR Series
Self Aligning Rotators, SAR Series
Welding Positioners, WP Series
Welding Turn Tables, WTT Series
Column & Boom Manipulators, CB Series
Wear plate Hardfacing/Cladding Systems
Heavy Duty Transfer Trolleys
Pugmill & Screw Conveyors
Industrial Winches
Custom Built systems as per customer applications
SELF CENTERING ROTATORS, SCR SERIESAlso known as Conventional Self Centring Rotators Job Rotators, Welding Rotators, Tank Turning Rolls,
Welding Rotators, Vessel Welding Rotators, Tank welding rotators, Tank rollers, Roller Beds, Power Turning Rolls, Pipe Rolls, Power turning Rolls, Idler Rotators, Conventional Rotators, Pipe turning Rolls, Pipe
Rotators.
Note:a)Custom Built self centring rotators can also be provided apart from the standards.b) We reserve the right to modify the dimensions & others as per new design developments.
Optional:a) Ratchet spanner for Screw.b) Without lead screw i.e.
Conventional Type Rotator.c) Manual or Motorized
Trolley/Bogie mounted.d) Skew arrester to avoid
longitudinal displacements. e) Roller material as per
requirement.f) Synchronization of two or
more drive unit rotators.g) Totally covered system for
Blasting or Painting application.
SELF ALIGNING ROTATORS, SAR SERIESAlso known as Job Rotators, Self Aligned Rotators, Adjustable Turning Rolls,
Auto Diameter Setting Rotators.
Note:a)Custom Built self aligning rotators can also be provided apart from the standards.b) We reserve the right to modify the dimensions & others as per new design developments.
Optional:a) Manual or Motorized
Trolley/Bogie mounted.b) Skew arrester to avoid
longitudinal displacements. c) Roller material as per
requirement.d) Synchronization of two or
more drive unit rotators.
WELDING POSITIONERS, WP SERIES &
WELDING TURN TABLES, WTT SERIES Also known as Job Positioners, Pipe Positioners, Rotary Tables, Tilt Positioners.
Note:a)Custom Built Welding positioner/Turn Table can also be provided apart from the standards. b) Models marked with * have manual tilting arrangement.c) We reserve the right to modify the dimensions & others as per new design developments. Optional:a) Square/Rectangular face plate.b) Servo drive for robotic application.c) Gas purging bore at spindle for TIG welding applications.
COLUMN & BOOM MANIPULATORS, CB SERIESAlso known as Welding Manipulators, Welding boom, Welding head manipulators, SAW Welding
Manipulators, L-Seam & C-seam Manipulators.
Note:a)Custom Built Colum & boom manipulators as per stroke requirements can also be provided apart from the standards. b) Ladder included.c) Manual Column Swivel 360 degree.d) Anti fall arrangement adopted for all models.e) We reserve the right to modify the dimensions & others as per new design developments. Optional:a) X-Y Cross Slidesb) Welding Head & Power Source.c) Without trolley base.d) Flux recovery unit.e) Trolley cable trailing arrangement.f) Operator platform.
WEAR PLATE HARDFACING/CLADDING SYSTEMS
Flat plate Hardfacing/cladding system .
Available in two types:1) Moving table and stationery gantry.2) Moving Gantry and stationary table.
Available features:a) Chevron, Sinusoidal, Square profile
and many others can be achieved.b) PLC programmed servo controllers of
reputed make.c) Optimized plate clamping
arrangement.d) Efficient water cooling arrangement
for the bed.e) Simultaneous torch functioning for
increasing production rate.f) Water cooled torch arrangement.g) Air conditioned control panel.h) Welding wire push pull arrangement.i) Ladder and Platform arrangement.j) And many others.
Round plate Hardfacing/cladding system or also known as Headstock Tailstock and Welding Lathe.
Available features:a) Chevron, Sinusoidal, Square profile
and many others can be achieved.b) PLC programmed servo controllers
of reputed make.c) Spider type shell clamping
arrangement to accommodate varying diameters.
d) Simultaneous torch functioning for increasing production rate.
e) Water cooled torch arrangement.f) Air conditioned control panel.g) Welding wire push pull arrangement.h) Ladder and Platform arrangement.i) And many others.
NOTE: PLEASE CALL/MAIL US FOR DETAILED SPECIFICATION AND GA DRAWING OF THE SAME.
PRODUCT SHOWCASE
Hydraulic Fit-Up Rotators.Application: Wind Tower Manufacturing,Progressive Fit-Up Stations.
Motorized Trolley Mounted Blasting/Painting RotatorsApplication: Carrying & Rotating Shells in Blasting or Painting Area.
Roller Stands
Special application Portable Positioners.
Few of our Custom Built SPM as per Customer Requirements
Pugmill
Cone Positioning SPM
Winches
Transfer Trolleys
Fully Auto C-Seam Welding Station
Lift Type Turn Table
ALFA LAVAL INDIA, Satara
ANUP ENGINEERING LIMITED, Ahmedabad
ADOR FONTECH
ALTECH FAB.
APOLLO TYRES, Chennai
BESTALL ENGINEERS, Pune
BHEL (Bhopal/Haridwar/Trichy/Goindwal)
CORODURE, West germany
CHHATRAPATI ENG. LTD, Indapur
DEMAG CRANES, pune
DIFFUSION ENGINNERING LTD., Nagpur
ESAB INDIA LTD.
FABTECH ENGINEERS, Pune
FERROMATIK MILACRON
FOURESS ENGINEERS LTD., Aurangabad
G.R ENGINEERING LTD., Tarapur
HEMRL
INOX INDIA LTD., Gujarat
INOX WIND, Gujarat
ISRO, Shriharikota
The Indian Hume Pipe Co. Ltd, Mumbai
KSB PUMPS
KALYANI FORGE LTD.
JSW STEEL LTD.
L&T, (Hazira, Mumbai, Chennai, OMAN)
MABLE EINGINEERS LTD., Chennai
MAZGAON DOCK LTD., Mumbai
N-KOM, Qatar
PIPAVA SHIPYARD
PRAJ INDUSTRIES
PRABHU ROCKSHAPE, Solapur
PERFECT INTERNATIONAL, Dubai
SUZLON ENERGY LTD., Gandhidham
SUDHIR BROS., Mumbai
SHRENIK INDUSTRIES
SIEMENS
SUPERON SCHWEISSTECHNIK INDIA LTD,
Gurgaon
THERMAX LTD., Pune
TEMA INDIA LTD.
TESSEY ENGINEERS, Chennai
TAL Mfg. Solutions Ltd, Pune
VRV CRYOGENIC, Andrapradesh
V-TECH, Mumbai
WALCHANDNAGAR INDUSTRIES LTD.
FEW OF OUR ESTEEMED CLIENTS
Renowned for WELDING, POSITIONING & HANDLING EQUIPMENTS SINCE 1995Rotators : Positioners : Column & Boom Manipulators : Hardfacing/Cladding Wear Plate Mfg. Systems :
Transfer Trolleys : Pugmill : Screw Conveyors & Custom Built SPM as per Requirements.
Unit 1 – S62 MIDC Bhosari, Pune 411 026, Maharashtra, INDIAUnit 2 – J202/1 MIDC Bhosari, Pune 411 026, Maharashtra, INDIALandline: 020 – 2712 6906 6907Mobile: 91 9049989559, 9890193306Email: [email protected]: www.shriramtransmissions.com, www.srtpune.com
SHRI RAM TRANSMISSIONS