7/25/2019 Siae ALplus Nodal Manual Configuration Instructions (V1)
http://slidepdf.com/reader/full/siae-alplus-nodal-manual-configuration-instructions-v1 1/29
KORDIA SOLUTIONS
SIAE ALPLUS NODAL – MANUALCONFIGURATION INSTRUCTIONS
ABSTRACT:
This document details the connections and configuration required to ensure NMS
connectivity to Siae AL+ Nodal microwave links
Commercial In Confience
1
DO!M"NT #OS$%&'$DO$()*
7/25/2019 Siae ALplus Nodal Manual Configuration Instructions (V1)
http://slidepdf.com/reader/full/siae-alplus-nodal-manual-configuration-instructions-v1 2/29
Doc!men" S"a"!# Recor
DOCUMENT RE$ISION RECORD
ISSUE NO ISSUE
DATE
PREPARED
B%
R E$IE&ED B% PAGES IN
DOCUMENT
( (,),)((- .u /u )-
0,(,)(( .u /u )-
C'ANGE 'ISTOR%
ISSUE NO DESCRIPTION
( Draft issued1
!2date all " to unframed1
CONTACTS AND AUT'ORISATION
NAME TITLE NUMBER SIGN OFF
.u /u Transmission "ngineer (*)* *- (34
DOCUMENT DISTRIBUTION
NAME TITLE DATE
REFERENCE DOCUMENTS
TITLE DATE
2
DO!M"NT #OS$%&'$DO$()*
7/25/2019 Siae ALplus Nodal Manual Configuration Instructions (V1)
http://slidepdf.com/reader/full/siae-alplus-nodal-manual-configuration-instructions-v1 3/29
Ta(le of Con"en"#
) In"ro!c"ion ************************************************************************************+, Confi-!ra"ion In#"r!c"ion# **************************************************************.
)1 onnect to a Siae 5D!11111111111111111111111111111111111111111111111111111111111111111111110
)1) 5D! and OD! onfiguration111111111111111111111111111111111111111111111111111111111111114)1& DN 6ort onfiguration11111111111111111111111111111111111111111111111111111111111111111113
)1* 7outing Ta8le onfiguration111111111111111111111111111111111111111111111111111111111111)(
)10 Stored 7outing Ta8le onfiguration11111111111111111111111111111111111111111111111111)
)14 OS69 onfiguration111111111111111111111111111111111111111111111111111111111111111111111111)&
)1: !2load the onfiguration from "qui2ment to 611111111111111111111111111111111)0)13 Download the onfiguration from 6 to "qui2ment1111111111111111111111111111):
3
DO!M"NT #OS$%&'$DO$()*
7/25/2019 Siae ALplus Nodal Manual Configuration Instructions (V1)
http://slidepdf.com/reader/full/siae-alplus-nodal-manual-configuration-instructions-v1 4/29
) In"ro!c"ion
This manual has 8asic instructions to setu2 Siae AL2lus Nodal microwave radios
in %odafone network1
4
DO!M"NT #OS$%&'$DO$()*
7/25/2019 Siae ALplus Nodal Manual Configuration Instructions (V1)
http://slidepdf.com/reader/full/siae-alplus-nodal-manual-configuration-instructions-v1 5/29
2 Confi-!ra"ion In#"r!c"ion#
2.1 Connect to a Siae IDU
;hat do you need<
ST software installed1
= !S> ca8le with ty2e A 2lug and ty2e > 2lug1
5n the SCT Tools bar? click Connect and enter the user name and 2assword? and
then click OK 1 The Equipment IP Address is not required for !S> connection? the
6 will auto detect the 56 when esta8lish the 666 connection1
U#er: S%STEM
Pa##/or: #iaemicr
5
DO!M"NT #OS$%&'$DO$()*
7/25/2019 Siae ALplus Nodal Manual Configuration Instructions (V1)
http://slidepdf.com/reader/full/siae-alplus-nodal-manual-configuration-instructions-v1 6/29
2.2 IDU and ODU Configuration
onfigure the 5D! and OD! 2ro2erties such as agent 56? remote element ta8le?
frequency? modulation and ca2acity? etc1
1 onfigure equi2ment 2ro2erties include "qui2ment 5D and Agent 561
o @ighlight the 5D! in SCT Equipment List Area? and then go to SCT
Tools bar click Equipment Properties1
o Set the Equipment ID as 2er T= Design1
o Set Agent IP Address same as the "thernet 56 address according to
NMS design1
o lick Apply to save the changes1
o The Restart 8utton is used to restart the 5D!1
)1 onfigure remote element ta8le1
o @ighlight the 5D! in SCT Equipment List Area? and then go to SCTTools bar click Tools Subnetor! Con"iguration #i$ard1
6
DO!M"NT #OS$%&'$DO$()*
7/25/2019 Siae ALplus Nodal Manual Configuration Instructions (V1)
http://slidepdf.com/reader/full/siae-alplus-nodal-manual-configuration-instructions-v1 7/29
o lick Add Station in %e Con"iguration to add a new station1
o To add local equi2ment in the new station? highlight the new station
and click Add Element1 Set 56 as local equi2ment 56 and check
&anaged by SCT 8o=1 lick OK to save1
o To add remote equi2ment in the new station? highlight the new
station and click Add Element1 Set 56 as remote equi2ment 56 and
check Remote Lin! 8o=1 lick OK to save1
o hoose the station in the Actual Con"iguration' click Sent to send the
new configuration to the equi2ment1
&1 onfigure "qui2ment onfigurator1
o @ighlight the 5D! in SCT Equipment List Area? and then go to SCT
Tools bar click Equipment LCT Inter"ace1
7
DO!M"NT #OS$%&'$DO$()*
7/25/2019 Siae ALplus Nodal Manual Configuration Instructions (V1)
http://slidepdf.com/reader/full/siae-alplus-nodal-manual-configuration-instructions-v1 8/29
o lick Con"igurator under "qui2ment in the L@S menu1
o onfigure the hardware as 2er equi2ment on site and design 2ack1
o lick Apply to save the changes1
o Ca!"ion: Moif0 "1e 1ar/are "02e /ill era#e all "1e 2re3io!#
cro## connec" informa"ion in "1e e4!i2men"*
*1 onfigure local link 5D? modulation and ca2acityo @ighlight the 5D! in SCT Equipment List Area? and then go to SCT
Tools bar click Equipment LCT Inter"ace1o lick &od()Cap( under "qui2ment in the L@S menu1
8
DO!M"NT #OS$%&'$DO$()*
7/25/2019 Siae ALplus Nodal Manual Configuration Instructions (V1)
http://slidepdf.com/reader/full/siae-alplus-nodal-manual-configuration-instructions-v1 9/29
o 5n &od()Cap( ta8? set &odulation and Capacity as 2er L"71 This
ca2acity is refer to radio ca2acity in the L"7? normally in M8its,s?
not the " ca2acity of the link1
o 5n Local Lin! ID ta8? set Local Lin! ID to ( to disa8le this function
or set the value as 2er L"71 >oth ends must have the same local
link 5D1
o lick Apply to save the changes1
01 7adio >ranch La8el
9
DO!M"NT #OS$%&'$DO$()*
7/25/2019 Siae ALplus Nodal Manual Configuration Instructions (V1)
http://slidepdf.com/reader/full/siae-alplus-nodal-manual-configuration-instructions-v1 10/29
o @ighlight the 5D! in SCT Equipment List Area? and then go to SCT
Tools bar click Equipment LCT Inter"ace1
o lick *eneral Preset A under "qui2ment in the L@S menu1
o 5n &iscellaneous ta8? set Radio +ranc, label 2er design 2ack1
o lick Apply to save the changes1
41 6ower and 9requencyo @ighlight the 5D! in SCT Equipment List Area? and then go to SCT
Tools bar click Equipment LCT Inter"ace1
o lick Radio +ranc, -A under 7adio in the L@S menu1
10
DO!M"NT #OS$%&'$DO$()*
7/25/2019 Siae ALplus Nodal Manual Configuration Instructions (V1)
http://slidepdf.com/reader/full/siae-alplus-nodal-manual-configuration-instructions-v1 11/29
o 5n .requencies ta8? set the frequency as 2er L"7? click the Loc!
C,annel and then Apply 8utton to save the changes1
o 5n Poers ta8? set T/ Poer Control to &anual to disa8le AT6 or
Automatic to ena8le AT61
o Set the &a/ Pt/ 0alue as 2er L"7 for radio T= level1
o lick Apply to save the changes1
o 5n Settings ta8? set Carrier Only to O..? set it to ON will lose the
traffic1
o Set T/ Transmitter to O% to turn on the transmitter1o Set RT PS1 to O%? this will turn on the 2ower to the OD!1
11
DO!M"NT #OS$%&'$DO$()*
7/25/2019 Siae ALplus Nodal Manual Configuration Instructions (V1)
http://slidepdf.com/reader/full/siae-alplus-nodal-manual-configuration-instructions-v1 12/29
o lick Apply to save the changes1
:1 onfigure Synchronisation? this is only required if the SD@ is clock source1
o @ighlight the 5D! in SCT Equipment List Area? and then go to SCT
Tools bar click Equipment LCT Inter"ace1
o lick Sync,ronisation in the L@S menu1
o lick ST&- 2T34 8o= to configure1
o Enable Timing Sin! Priority and set Priority to -1
12
DO!M"NT #OS$%&'$DO$()*
7/25/2019 Siae ALplus Nodal Manual Configuration Instructions (V1)
http://slidepdf.com/reader/full/siae-alplus-nodal-manual-configuration-instructions-v1 13/29
o Set the ST&5- Source to ST&5- 6-7 or ST&5- 687 de2ends on which
STM$ is ena8led1
o lick Apply to save the changes1
31 onfigure STM$? only STM$ B is ena8led in this e=am2le1
o @ighlight the 5D! in SCT Equipment List Area? and then go to SCTTools bar click Equipment LCT Inter"ace1
o lick &atri/ ST&5- 6-7 under +ase +and' Tributaries' ST&5- in the L@S
menu1
o 5n Settings ta8? ena8le the STM$ B 8y click the switch in the
diagram1
o Set the 93 Trace Type to Disable1
o lick Apply to save the changes1
o 5n T,res,olds ta8? set the thresholds as 2er design1
o lick Apply to save the changes1
13
DO!M"NT #OS$%&'$DO$()*
7/25/2019 Siae ALplus Nodal Manual Configuration Instructions (V1)
http://slidepdf.com/reader/full/siae-alplus-nodal-manual-configuration-instructions-v1 14/29
o 5n Laser Control ta8? set the Transmitter Control to On and Automatic
S,udon to Auto1
o lick Apply to save the changes1
-1 onfigure %$*? only STM$ B is ena8led in this e=am2le1
o @ighlight the 5D! in SCT Equipment List Area? and then go to SCT
Tools bar click Equipment LCT Inter"ace1
o
lick &atri/ 0C5: 6-7 under +ase +and' Tributaries' 0C5: in the L@Smenu1
o 5n 9-)Alarms ta8? set the Trace Type to Disable1
14
DO!M"NT #OS$%&'$DO$()*
7/25/2019 Siae ALplus Nodal Manual Configuration Instructions (V1)
http://slidepdf.com/reader/full/siae-alplus-nodal-manual-configuration-instructions-v1 15/29
o lick Apply to save the changes1
o 5n +;)Signal Label ta8? set the thresholds as 2er design1
o Set Sent label to tugStructure? and set E/pected Label to tugStructure(
o lick Apply to save the changes1
(1onfigure ross onnect1
o @ighlight the 5D! in SCT Equipment List Area? and then go to SCTTools bar click Equipment LCT Inter"ace1
o lick Cross Connect in the L@S menu1
15
DO!M"NT #OS$%&'$DO$()*
7/25/2019 Siae ALplus Nodal Manual Configuration Instructions (V1)
http://slidepdf.com/reader/full/siae-alplus-nodal-manual-configuration-instructions-v1 16/29
o 5n Radio .raming ta8? lick Set All E- 1n"ramed1
o lick Apply to save the changes1
o 5n &atri/ ta8? lick onfiguration to configure the cross connection1
o hoose the ty2e of the connections? Tributary < Radio or Tributary <
Tributary
o Select the correct 7adio interface1
16
DO!M"NT #OS$%&'$DO$()*
7/25/2019 Siae ALplus Nodal Manual Configuration Instructions (V1)
http://slidepdf.com/reader/full/siae-alplus-nodal-manual-configuration-instructions-v1 17/29
o Select the correct Tri8utary interface to &atri/ -= E- or &atri/ ST&5
- 6-7 or &atri/ ST&5- 6871
o Navigate the cursor to the source interface Ci1e1 7adio A Tri8 ?
left click and hold? move the cursor to the destination interface Ci1e1
Matri= 4 " Tri8 and dro21 There will 8e a 8lue line 8etweenthese two interfaces1
o lick the la8el of the cross connection to modify the la8el
o lick Apply to save the changes1
17
DO!M"NT #OS$%&'$DO$()*
7/25/2019 Siae ALplus Nodal Manual Configuration Instructions (V1)
http://slidepdf.com/reader/full/siae-alplus-nodal-manual-configuration-instructions-v1 18/29
o 6lease note that in the STM$ interface? T!'$& )? T!'$) , and %$
) 5 mean #LM ),5 of that STM$ interface1
o After com2lete the cross connection? click Apply to save the
changes1
2.3 DCN Port Configuration
To configure the DN interfaces? highlight the 5D! in SCT Equipment List Area? and
then go to SCT Tools bar click Equipment Communication Setup Port
Con"iguration1
1 onfigure the 56 address for the "thernet 2ort of the 5D!1
o lick IP Et,ernet ta81
o Set the IP Address and IP %et&as! as 2er NMS design1
o Make sure 8oth LA% - Cable Crosso>er are auto1
o lick Set 0alues and Store1
18
DO!M"NT #OS$%&'$DO$()*
7/25/2019 Siae ALplus Nodal Manual Configuration Instructions (V1)
http://slidepdf.com/reader/full/siae-alplus-nodal-manual-configuration-instructions-v1 19/29
)1 666 7S$)&)
o lick PPP RS58;8 ta81
o Add later
&1 onfigure the !S> LT 666 connection1
o lick LCT PPP ta81
o Set IP PPP Address and IP PPP %et &as! to IP 1nnumbered1
o Set PC IP Address to Et,ernet +roadcast IP Address 5 -1
o lick Set 0alues and Store1
19
DO!M"NT #OS$%&'$DO$()*
7/25/2019 Siae ALplus Nodal Manual Configuration Instructions (V1)
http://slidepdf.com/reader/full/siae-alplus-nodal-manual-configuration-instructions-v1 20/29
*1 onfigure the 7adio 56 address1
o lick Radio A ta81
o Set IP address and %et &as! to IP 1nnumbered1
o Always set PPP mode to Client1 lient for 8oth ends of the radio link1
o lick Set 0alues and Store1
01 lick Restart to restart the equi2ment1
2.4 Routing Table Configuration
Only Default 'ateway in the 7outing Ta8le is required? once the OS69 is switched
on? it will generate a 2ro2er routing ta8le1 To access the 7outing Ta8le? highlight
the 5D! in SCT Equipment List Area? and then go to SCT Tools bar click Equipment
Communication Setup Routing Table1
1 Set the De"ault *ateay as 2er NMS design1
o 5n the trial link setu2? the Near "nd Default 'ateway is the router
address1 The 9ar "nd Default 'ateway is the Near "nd 7adio 561
o The Near "nd 7adio 56 is same address as the Near "nd "thernet 56
since the 7adio A set as unnum8ered 561
o The interface cannot 8e set? it will automatic 2ick u2 8y the
equi2ment1 ;hen set the router 56 as gateway? the interface willchange to Lan1 ;hen set the Near "nd 7adio 56 as gateway? the
interface will change to Radio -A1
)1 lick Apply to save the configuration1
20
DO!M"NT #OS$%&'$DO$()*
7/25/2019 Siae ALplus Nodal Manual Configuration Instructions (V1)
http://slidepdf.com/reader/full/siae-alplus-nodal-manual-configuration-instructions-v1 21/29
Near "nd 7outing Ta8le
9ar "nd 7outing Ta8le
2.5 Stored Routing Table Configuration
Only Default 'ateway in the Stored 7outing Ta8le is required1 To configure the
Stored 7outing Ta8le? highlight the 5D! in SCT Equipment List Area? and then go to
SCT Tools bar click Equipment Communication Setup Stored Routing Table1
1 Set the De"ault *ateay and Inter"ace as 2er NMS design1
21
DO!M"NT #OS$%&'$DO$()*
7/25/2019 Siae ALplus Nodal Manual Configuration Instructions (V1)
http://slidepdf.com/reader/full/siae-alplus-nodal-manual-configuration-instructions-v1 22/29
o 5n the trial link setu2? the Near "nd De"ault *ateay is the router
address and Inter"ace is Lan1 The 9ar "nd De"ault *ateay is the
Near "nd 7adio and Inter"ace is Radio -A1
)1 lick Apply and then click Sa>e to save the configuration1
Near "nd Stored 7outing Ta8le
9ar "nd Stored 7outing Ta8le
22
DO!M"NT #OS$%&'$DO$()*
7/25/2019 Siae ALplus Nodal Manual Configuration Instructions (V1)
http://slidepdf.com/reader/full/siae-alplus-nodal-manual-configuration-instructions-v1 23/29
2. OSP! Configuration
To configure the OS69? highlight the 5D! in SCT Equipment List Area? and then go
to SCT Tools bar? click Equipment Communication Setup OSP.1
1 Set OS69 Areas and 5nterfaces1
o OS69 tool8ar Areas)I.s
o Add a new OS69 Area1
@ighlight the Areas? and click Add to add new area1
Set the Area ID and Stub Area as 2er NMS Design1
lick Add to save the new area1
o Add 5nterfaces to the new area1
23
DO!M"NT #OS$%&'$DO$()*
7/25/2019 Siae ALplus Nodal Manual Configuration Instructions (V1)
http://slidepdf.com/reader/full/siae-alplus-nodal-manual-configuration-instructions-v1 24/29
The interface ty2e is identified in the 8rackets after the 56
address1
Drag the Radio-A and Lan interfaces from Area (1(1(1( to
the new Area1
Set Radio -A status to Acti>e? 8y highlight the Radio-A and
dou8le click the Status1
Set Lan status to Acti>e? 8y highlight the Lan and dou8le
click the Status1 lick Apply to save the changes1
)1 6ro2erties? active the OS691
o OS69 tool8ar Properties
o Set the Router ID to the equi2ment "thernet 561 ;hen OS69 is
ena8led? the 7outer 5D cannot 8e changed1
o lick Apply to save the change1
o heck OSP. Process Acti>e 8o= to ena8le the OS691
o lick Apply to save the changes1
24
DO!M"NT #OS$%&'$DO$()*
7/25/2019 Siae ALplus Nodal Manual Configuration Instructions (V1)
http://slidepdf.com/reader/full/siae-alplus-nodal-manual-configuration-instructions-v1 25/29
&1 lick Store in the OS69 tool8ar to save the changes to memory1
*1 Restart the equi2ments1
2." U#load t$e Configuration fro% &'ui#%ent to PC
This function is used to 8acku2 the full equi2ment configuration1 'o to SCT Toolsbar? click Tools Equipment Con"iguration #i$ard to access1
)* 1pload +ac!up .ull Equipment Con"iguration
25
DO!M"NT #OS$%&'$DO$()*
7/25/2019 Siae ALplus Nodal Manual Configuration Instructions (V1)
http://slidepdf.com/reader/full/siae-alplus-nodal-manual-configuration-instructions-v1 26/29
,* hoose the equi2ment ty2e in the menu1 5n this case? Radio PD? ALPL1S
81nit Term@DI1
5* @ighlight the equi2ment desired and then click OK 1
26
DO!M"NT #OS$%&'$DO$()*
7/25/2019 Siae ALplus Nodal Manual Configuration Instructions (V1)
http://slidepdf.com/reader/full/siae-alplus-nodal-manual-configuration-instructions-v1 27/29
+* Select the directory and file name in your 6 and click Sa>e1
.* Once the u2loading is com2leted? click OK to e=it1
2.( Do)nload t$e Configuration fro% PC to &'ui#%ent
This function is used to restore the full equi2ment configuration1 'o to SCT Tools
bar? click Tools
Equipment Con"iguration #i$ard to access1
27
DO!M"NT #OS$%&'$DO$()*
7/25/2019 Siae ALplus Nodal Manual Configuration Instructions (V1)
http://slidepdf.com/reader/full/siae-alplus-nodal-manual-configuration-instructions-v1 28/29
)* Donload Restore .ull Equipment Con"iguration
,* Select the configuration file in your 6 and click Open1
5* lick OK to continue1
28
DO!M"NT #OS$%&'$DO$()*
7/25/2019 Siae ALplus Nodal Manual Configuration Instructions (V1)
http://slidepdf.com/reader/full/siae-alplus-nodal-manual-configuration-instructions-v1 29/29
+* Once the downloading is com2leted? click OK to e=it1
.* Restart the equi2ment1
6* Login the equi2ment again? confirm the OS69 settings1
29