EATON 1
Sicherheit, auf die Sie sich verlassen können
Catalogue LED High Bay Light Fittings and Floodlightsfor Industrial Applications
Industrial light fi ttings
2 EATON
LED Lighting Solutions for Industrial ApplicationsWhy Crouse-Hinds Series LED Industrial Light Fittings are the Ideal Solution
With it’s LED light fittings from Crouse-Hinds Series Eaton offers you the ideal solution for numerous industrial applica-tions.
With more than 100 years experience in industrial lighting for harsh environments like humidity, dust, corrosive atmospheres and high mechanical load we offer you safe and reliable light-ing solutions with the convincing advantages of a guiding, energy efficient and maintenance-free LED technology.
Why LED? Why Eaton’s
Crouse-Hinds Series?
Operating life• Rated lifetime up to
200.000 h and nearly maintenance-free and save operation
Robust and nearly maintenance-free
• Shock- and vibration- resistant solid-state devices have no filaments or glass components that could break, greatly reducing the risk of premature failure
Energy-efficient• In comparison with HID or
incandescent lamps, LEDs are more efficient up to 70%
Start- and restart time
• Impervious against switching cycles
• Immediate start, provides instant and full illumination; no delay or restart time as with fluorescent or HID lamps
High light quality
• Better colour rendering and optimised colour temperature; no UV/near IR radiation
Reliable, innovative, expert• Pioneer in LED technology
for use in harsh industrial and hazardous areas
Trendsetting technology
• Robust construction for extreme environment
• Efficient heat management for a longer lifetime
• Adjusted optic for an optimised light distribution an colour rendering
Concerted lighting concept
• LED light fittings from Crouse-Hinds Series are compatible for industrial and hazardous areas and enables a consistent lighting concept for different requirements
High Pressure Sodium9898
295295 Metal Halide
Incandescent25 200
High Pressure SodiumMetal Halide
98 18898 210
High Pressure SodiumMetal Halide
63 13063 120
High Pressure SodiumMetal Halide
47 9347 84
0 100 200 300 400 500
400W Metal Halide 70%
67%67%
88%
48%53%
52%48%
49%44%
455137
250W
200W
175W150W
100W
70W
Energy Consumption (Watts)
Average Energy Reduction with LED
= LED
Savings potential by use of LED light sources in comparison to conventional light fittings
Lighting calculation service
Our free lighting calculation service will help you to save time and money by creating a virtual model of a proposed design, revealing luminaire characteristics and effects that would be hard to detect in anything short of the completed installation.
Please visit our website
https://www.crouse-hinds.de/en/lighting-calculation-service/
EATON 3
Overview: Light Fittings for Industrial ApplicationsLED Industrial Light Fittings
Range classification Application Product
Light solution comparison
Luminous flux
Rated power consumption Rated voltage
Harsh industrial environment
High and low bayPVM LED
9 types - replaces 70 W up to 1000 W HID lamps
3,515 up to 26,531 lumen
41 W - 232 W100-277 VAC, 108-250 VDC
Floodlight
PFM LED / NPFM LED
8 types - replaces 70 W up to 1500 W HID lamps
3,189 up to 53,890 lumen
64 W - 531 W100-277 VAC, 108-250 VDC
General industrial applications High-bay
IHB LED
5 types - replaces 250 W up to 1500 W HID lamps or 4 up to 10 T5 HO lamps
16,900 up to 67,600 lumen
145 W - 582 W 100-277 VAC,
Applications
Harsh environments with extreme temperatures
Moisture
Dust and heat
Industrial production area
Heavy industry
Water conditioning and waste water treatment
Mining
Marine/Offshore
Terminals
Pharmaceutical industry
Logistic
Food industry
4 EATON
Pendant Light Fitting Series PVM LED(for harsh industrial applications)
Features• High efficient up to 124 lm/W
• Multiple drivers
• High efficient heat sink management for a lifetime up to 60,000 h @ 65 °C
• Wide temperature range from -40 °C up to +65 °C (depending on model)
• High degree of protection IP66 for harsh environment
• Dimmable by control input 0 -10 V
The powerful pendant light fittings in LED techniquePVM 3/5/7/9/11/13/17/21/25 LThe energy-saving PVM light fittings with LED technology are ideal for all general lighting applications in industrial areas with harsh environmental conditions as vibrations, dust, moisture, corrosive atmospheres and extreme temperatures.
Replacement of conventional light fittings from 70 W up to 1000 WWith the integrated high-power LED technology and a power consumption from 29 W up to 232 W these lights can be used to replace comparable conventional light sources with an equivalent capacity of up to 1000 W.
LED technique for harsh operation conditions
Due to the particularly solid construction of the housing and the vibra-tion resistance of the LED module, the PVM is resistant to impact, shock and vibration. As a result, it represents the ideal lighting con-cept for use in areas with difficult environmental conditions.
Wide temperature range for extreme conditions
Thanks to temperature range from - 40 °C up to +65 ° the light fit-tings can be used in many applications.
Best lighting technology for numerous applications PVM light fittings are available in 3 different types:
• Type V has a symmetric light distribution and is optimized for general area illumination.
• Type III has an asymmetrical light distribution and is, therefore, suitable for near-edge mounting (wall mounting) for surface illu-mination
• Type I has a narrow light distribution and is ideal for lighting roads and pathways.
EATON 5
Ordering detailsPVM LED for harsh industrial applications
Ordering details
Type Lamp / Illuminant
Rated luminous flux of the luminaire
Weight Cable gland / thread
Screw plug Enclosure type
Order No.
PVM LED Lamp module with LEDs (without top mounting module, please order separately)
PVM 3L LED LED System 29 W type V 3,515 lm 8.1 kg – – 1 1 2404 400
PVM 5L LED LED System 43 W type V 5,335 lm 8.1 kg – – 1 1 2407 746
PVM 7L LED LED System 55 W type V 7,260 lm 8.1 kg – – 1 1 2407 745
PVM 9L LED LED System 85 W type V 9,226 lm 8.1 kg – – 1 1 2409 889
PVM 11L LED LED System 113 W type V 11,440 lm 8.1 kg – – 1 1 2408 233
PVM 13L LED LED System 130 W type V 13,266 lm 16.3 kg – – 2 1 2429 488
PVM 17L LED LED System 168 W type V 18,793 lm 16.3 kg – – 2 1 2430 349
PVM 21L LED LED System 196 W type V 22,110 lm 20.0 kg – – 3 1 2430 452
PVM 25L LED LED System 232 W type V 26,531 lm 20.0 kg – – 3 1 2430 455
PVM 3L LED LED System 29 W type I 3,360 lm 8.1 kg – – 1 1 2414 505
PVM 5L LED LED System 43 W type I 5,045 lm 8.1 kg – – 1 1 2414 517
PVM 7L LED LED System 55 W type I 6,844 lm 8.1 kg – – 1 1 2414 526
PVM 9L LED LED System 85 W type I 8,823 lm 8.1 kg – – 1 1 2414 534
PVM 11L LED LED System 113 W type I 10,730 lm 8.1 kg – – 1 1 2414 542
PVM 13L LED LED System 130 W type I 12,842 lm 16.3 kg – – 2 1 2430 347
PVM 17L LED LED System 168 W type I 18,195 lm 16.3 kg – – 2 1 2430 450
PVM 21L LED LED System 196 W type I 21,404 lm 20.0 kg – – 3 1 2430 453
PVM 25L LED LED System 232 W type I 25,685 lm 20.0 kg – – 3 1 2430 456
PVM 3L LED LED System 29 W type III 3,309 lm 8.1 kg – – 1 1 2414 508
PVM 5L LED LED System 43 W type III 4,468 lm 8.1 kg – – 1 1 2414 518
PVM 7L LED LED System 55 W type III 6,741 lm 8.1 kg – – 1 1 2407 564
PVM 9L LED LED System 85 W type III 8,618 lm 8.1 kg – – 1 1 2414 535
PVM 11L LED LED System 113 W type III 10,660 lm 8.1 kg – – 1 1 2414 543
PVM 13L LED LED System 130 W type III 12,493 lm 16.3 kg – – 2 1 2430 348
PVM 17L LED LED System 168 W type III 17,699 lm 16.3 kg – – 2 1 2430 451
PVM 21L LED LED System 196 W type III 20,822 lm 20.0 kg – – 3 1 2430 454
PVM 25L LED LED System 232 W type III 24,987 lm 20.0 kg – – 3 1 2430 457
PVM LED top mounting module, (without lamp module, please order separately)
JM5 1) Top mounting module for 11/2“ pole mounting, 25°
1.6 kg 1 x 3/4'' thread
– – 22 250
PM5 Top mounting module for 11/2“ pole mounting, straight
2.0 kg 1 x 3/4'' thread
– – 00 080
CM20 Top mounting module for M20 ceiling mounting
1.3 kg 4 x M20 thread
4 x M20 – 1 1843 088
TWM20 Top mounting module for M20 wall mounting
2.0 kg 4 x M20 thread
4 x M20 – 1 1832 237
S812 mounting bracket (can only be used with top mounting module CM20)
1.0 kg – – – 1 2268 927
JGA (cable adaptor 1½¨ for pole mounting)
JGA5520 Adapter 1½¨ for top mounting module JM5 and PM5 for insertion of a cable gland M 20
0.45 kg 1x M20 thread
– – 11826774
1) only for PVM 3L-11L
Scope of delivery without fixing accessories, if not stated otherwise. Metal cable glands see main catalogue part 2: 2.3.12 ff Further mounting material on request
Gehäuse Größe 1
Gehäuse Größe 3
Gehäuse Größe 2
6 EATON
Polar curve PVM LED type V
Polar curve PVM LED type III
Polar curve PVM LED type I
C 0 / C90 l/cd/klm
90
75
60
45
3015
015
30
45
60
75
90
80
160
240
320
400
C 0 C90
l/cd/klm
90
75
60
45
3015
015
30
45
60
75
90
80
160
240
320
400
C 0 C90
l/cd/klm
90
75
60
45
3015
015
30
45
60
75
90
0
150
300
450
600
750
Polar curve / Dimension drawingPVM LED for harsh industrial applications
Dimension drawings PVM LED
with top mounting module JM5
Mounting bracket S812
with top mounting module PM5
with top mounting module CM20
with top mounting module TWM20
383
25°
326
284 45
Top forceiling mounting
LED module
Mounting bracket
Locking pin
88,7
407
282
248
53,5
273,5
300
280
51,6 355
118,
6
226
287
117,
571
,2
Dimensions in mm
295
230
Ø 280
197
Ø 381.5
274
Ø 381.5
Lamp module
26.2
57.2
79.5
1 1/2“NPT
1 1/2“NPT M20/25
52.3
Ø15 (M20)Ø19.8 (M25)
Cable adaptor for pole mounting JGA5520
Ø 15
Size 1 Size 2 Size 3
EATON 7
Technical dataPVM LED for harsh industrial applications
Technical data
PVM 3L - 11L LED PVM 13L - 17L LED PVM 20L - 25L LED
Permissible ambient temperature -40 °C up to +65 °C -40 °C up to +55 °C -40 °C up to +55 °C
Lifetime fixtures L80 B10 - 200,000 h at ta = +25 °C L80 B10 - 60,000 h at ta = +65 °C
L80 B10 - 170,000 h at ta = +25 °C L80 B10 - 60,000 h at ta = +55 °C
L80 B10 - 170,000 h at ta = +25 °C L80 B10 - 60,000 h at ta = +55 °C
Rated voltage 100 - 277 V AC; 108 - 250 V DC 100 - 277 V AC; 108 - 250 V DC 100 - 277 V AC; 108 - 250 V DC
Frequency 50 - 60 Hz 50 - 60 Hz 50 - 60 Hz
Power 1) 1) 1)
Power factor cos >0.9 >0.9 >0.9
Circuit electronic driver electronic driver electronic driver
Protection class I I I
Lamp / Illuminant LED system, scope of delivery LED system, scope of delivery LED system, scope of delivery
Light colour/CRI 5000 K / Ra 70; 3000 K / Ra 80 on request 5000 K / Ra 70; 3000 K / Ra 80 on request 5000 K / Ra 70; 3000 K / Ra 80 on request
Rated luminous flux of the luminaire 1) 1) 1)
Dimensions (L x W x H) 280 x 295 x 230 mm 381 x 381 x 197 mm 381 x 381 x 274 mm
Terminals L, N, PE, max. 1 x 2,5 mm2
dimmer, 2 x 2,5 mm2 max.L, N, PE, max. 1 x 2,5 mm2
dimmer, 2 x 2,5 mm2 maxL, N, PE, max. 1 x 2,5 mm2
dimmer, 2 x 2,5 mm2 max
Enclosure colour grey/black grey/black grey/black
Enclosure material copper-free aluminium with epoxy-powder coating
copper-free aluminium with epoxy-powder coating
copper-free aluminium with epoxy-powder coating
Weight 8.1 kg 16.3 kg 20.0 kg
Degree of protection accd. to EN 60529 IP66 IP66 IP66
Protective cover / protective bowl heat- and impact resistant glass 2) heat- and impact resistant glass 2) heat- and impact resistant glass 2)
1) See Ordering details on page 5
2) Opaque cover and version in polycarbonate on request
8 EATON
Floodlight of the series PFM/NPFM LED(for harsh industrial applications)
Features• High efficient LED floodlight with more than 112 Lumen/Watt
• Up to 150,000 h nearly maintenance free operating hours
• Wide temperature range from -40 °C up to +65 °C (depending on model)
• Compact enclosure for difficult installations
• Easy installation with swivel bracket
• High efficient heat sink design for an optimised temperature management
• Robust design and high degree of protection IP66 for harsh environments
Lighting under harsh conditionsThe new series of energy-saving floodlights PFM/NPFM in LED technique is especially suited for for all general lighting applications in industrial areas with harsh environmental conditions as vibra-tions, dust, moisture, corrosive atmospheres and extreme temper-atures.
Replacement of conventional light fittings from 50 W up to 1500 WWith a luminous flux of the light fittings from 3,189 lm up to 53,890 lm these floodlights can be used to replace comparable conventional light sources with an equivalent power consumption from 50 W up to 1500 W.
High efficient LED technology
High efficient power LED module and more than 112 Lumen/Watt enables up to 70 % energy-cost savings compared to conventional HID lamps.
Long live-time and nearly maintenance-free
A very long and nearly maintenance-free lifetime of up to 150,000 h significantly reduces the total cost of ownership.
Wide temperature range for extreme conditions
Thanks to temperature range from - 40 °C up to +65 ° the flood-lights can be used in many applications.
Best lighting technology for numerous applicationsThe wall- or pole-mounted floodlights can be used outdoor in high-bay and medium mounting heights for the lighting of production facilities of heavy industries, chemical and food industry, mining, terminals and tunnels.
EATON 9
Accessories
Type Content Part-No. Order No..
SFA6 Slip fitter 2” for pole mounting 2049 3 2346 001 002
Metal cable glands see catalogue part 2: 2.3.12 ff
Visor, wire guard and safety cable on request
Ordering detailsPFM/NPFM LED for harsh industrial applications
Ordering details
Type Lamp / illuminant
Rated luminous flux of the luminaire
Cable gland/thread Screw plug Order No..
PFM 3L - 13L LED
PFM 3L CY/UNV1 76 M20 LED system 28 W 1) 3,189 lm 2 x M20, metal thread 1 x M20 1 2565 533
PFM 5L CY/UNV1 76 M20 LED system 45 W 1) 5,183 lm 2 x M20, metal thread 1 x M20 1 2565 534
PFM 7L CY/UNV1 76 M20 LED system 62 W 1) 7,095 lm 2 x M20, metal thread 1 x M20 1 2565 536
PFM 9L CY/UNV1 76 M20 LED system 79 W 1) 9,132 lm 2 x M20, metal thread 1 x M20 1 2565 537
PFM 11L CY/UNV1 76 M20 LED system 99 W 1) 11,107 lm 2 x M20, metal thread 1 x M20 1 2565 538
PFM 13L CY/UNV1 76 M20 LED system 112 W 1) 13,100 lm 2 x M20, metal thread 1 x M20 1 2565 539
PFM 3L CY/UNV1 76 M25 LED system 28 W 1) 3,189 lm 2 x M25, metal thread 1 x M25 1 2565 540
PFM 5L CY/UNV1 76 M25 LED system 45 W 1) 5,183 lm 2 x M25, metal thread 1 x M25 1 2565 541
PFM 7L CY/UNV1 76 M25 LED system 62 W 1) 7,095 lm 2 x M25, metal thread 1 x M25 1 2565 542
PFM 9L CY/UNV1 76 M25 LED system 79 W 1) 9,132 lm 2 x M25, metal thread 1 x M25 1 2565 543
PFM 11L CY/UNV1 76 M25 LED system 99 W 1) 11,107 lm 2 x M25, metal thread 1 x M25 1 2565 544
PFM 13L CY/UNV1 76 M25 LED system 112 W 1) 13,100 lm 2 x M25, metal thread 1 x M25 1 2564 387
NPFM 25L
NPFM 25L CY/UNV1 76 M25 LED system 263 W 1) 26,240 lm 2 x M25, metal thread, 1 x M25 cable gland Ø 10 - 16 mm
1 x M25 1 2433 691
NPFM 50L
NPFM 50L CY/UNV1 76 M25 LED system 531 W 1) 53,890 lm 2 x M25, metal thread, 1 x M25 cable gland Ø 10 - 16 mm
1 x M25 1 2442 808
1) Scope of delivery
10 EATON
Weight and dimensionsPFM 3L - PFM 7L
Dimensions (L x W x H) 394 x 178 x 305 mm
Weight 13.9 kg
PFM 9L - PFM 13L
Dimensions (L x W x H) 394 x 178 x 305 mm
Weight 14.4 kg
NPFM 25L
Dimensions (L x W x H) 533 x 204 x 406 mm
Weight 23.6 kg
NPFM 50L
Dimensions (L x W x H) 553 x 204 x 825 mm
Weight 48.1 kg
533556.3
Ø14
825
235.8277
203.7
632.6
254
127
Polar curve PFM 3L - 13L
C 0C90 l/cd/klm
90
75
60
45
3015
015
30
45
60
75
90
100
200
300
400
500
PFM 3L - 13L
Dimension drawing / Polar curve
Dimensions in mm
Dimension drawing / Polar curvePFM/NPFM LED for harsh industrial applications
Polar curve NPFM 25L /50L
C 0C90 l/cd
100
200
300
500
90
75
60
45
3015
015
30
45
60
75
90
400
NPFM 25L
533
552.5
Ø14120.740
6
234.5277
203.7
NPFM 50L
449
121
178
305
394
Ø14
EATON 11
Technical dataPFM/NPFM LED for harsh industrial applications
mm
Technical data
PFM 3L - 13L NPFM 25L NPFM 50L
Permissible ambient temperature -40 °C up to +65 °C -40 °C up to +55 °C -40 °C up to +55 °C
Lifetime fixtures L80 B10 - 50,000 h at ta = +65 °C / L80 B10 - 150,000 h at ta = +25 °C
L80 B10 - 60,000 h at ta = +55 °C
L80 B10 - 100,000 h at ta = +25 °CL80 B10 - 60,000 h at ta = +55 °C L80 B10 - 100,000 h at ta = +25 °C
Rated voltage 100 - 277 V AC / 108 - 250 V DC
120 - 277 V AC 127 - 250 V DC
120 - 277 V AC 127 - 250 V DC
Frequency 50 - 60 Hz 50 - 60 Hz 50 - 60 Hz
Power factor cos 0.9 > 0.9 > 0.9
Circuit electronic driver electronic driver electronic driver
Protection class I I I
Lamp / Illuminant LED system 28 - 112 W LED system 263 W LED system 531 W
Light colour / CR 5000 K / Ra 70; 3000 K / Ra 80 on request 5000 K / Ra 70 5000 K / Ra 70
Optic wide-angle (narrow-angle on request) wide-angle (narrow-angle on request) wide-angle (narrow-angle on request)
Dimensions (L x W x H) 394 x 178 x 305 mm 533 x 204 x 406 mm 533 x 204 x 825 mm
Terminals L, N and PE; 2 x 4 mm2 L, N and PE; 2 x 4 mm2 L, N and PE; 2 x 4 mm2
Enclosure colour grey grey grey
Enclosure material light alloy with powder coating light alloy with powder coating light alloy with powder coating
Weight 13.9 kg (PFM3L - PFM7L) / 14.5 kg (PFM9L - PFM13L)
23.6 kg 48.1 kg
Cable gland / gland plates / enclosure drilling
thread 2 x M20 x 1.5, 1 x M20 plugged, orthread 2 x M25 x 1.5, 1 x M25 plugged 1)
2 x M20 x 1.5, 1 x M20 plugged, or2 x M25 x 1.5, 1 x M25 plugged 1)
2 x M20 x 1.5, 1 x M20 plugged, or2 x M25 x 1.5, 1 x M25 plugged 1)
Type of mounting mounting bracket mounting bracket mounting bracket
Degree of protection accd. to EN 60529 IP66 IP66 IP66
Protective cover / protective bowl borosilicate glass 2) borosilicate glass 2) borosilicate glass 2)
1) see ordering details
2) Opaque cover and cover in polycarbonate on request
12 EATON
IHB Series High Bay LEDs(for light industrial applications indoor)
Features
• High performance LED-module with 117 Lumen/Watt
• Standard types with light output from 16,900 lm up to 67,600 lm
• Up to 67 % energy savings compared to conventional HID lamps.
• Dimmable by control input 0-10 V
• Resistant against switching-cycles
• High effi cient heat sink design for an optimised temperature management
• Suitable for damp location
• Wide ambient temperature range from -40 °C up to +60 °C
The powerful moisture-proof series of high bay light fi ttingsThe energy saving IHB series high bay LED is resistant against humid environments and is well suited for the high bay illumination in industrial areas as production halls, pack stations or warehouses.
High savings by an effi cient light techniqueWith their high effi cient LED technique and 117 Lumen/Watt this modular designed light fi ttings enables the replacement of con-ventional HID light fi ttings from 250 W up to 1000 W respective fl uorescent light fi ttings from 4 up to 10 T5-lamps by comparable luminous fl ux and drastically reduced cost of energy (up to 67 % in comparison with HID-lamps!). The IHB light fi ttings are also resist-ant against frequent switching cycles and need no starting phase as HID or fl uorescent lights.
Ideal for diffi cult to access areas
With its long and nearly maintenance-free lifetime up to 120,000 h this light fi tting ideally can be used in areas with diffi cult access, where maintenance and lamp-replacement is a considerable cost factor.
Wide temperature range for extreme conditions
Thanks to temperature range from - 40 °C up to +60 ° the light fi t-tings can be used in many applications.
The right size for your applicationIn order to prevent the use of different light systems for the illu-mination of a consistent project, the IHB series high bay LED is available in 6 different types with a light output from 16,900 lumen up to 67,600 lumen (8,450 lumen on request). The luminaire can be dimmed by a control input 0-10 V.
EATON 13
Ordering detailsIHB LED for light industrial applications indoor
Ordering details
Type *) Lamp / illuminant
No. of LED modules Rated luminous flux of the luminaire
WeightOrder No.
IHB16L/UNV1DCE LED system145 W 2 16,900 lm 7.7 kg IHB16L UNV1DCE
IHB24L/UNV1DCE LED system 216 W 3 25,350 lm 12.3 kg IHB24L UNV1DCE
IHB32L/UNV1DCE LED system 289 W 4 33,800 lm 16.3 kg IHB32L UNV1DCE
IHB48L/UNV1DCE LED system 436 W 6 50,700 lm 24.5 kg IHB48L UNV1DCE
IHB64L/UNV1DCE LED system 582 W 8 67,600 lm 33.6 kg IHB64L UNV1DCEIHB24L
*) IHB8L/UNV1 with one LED module (8,450 lm, 71 W) on request
IHB16L
IHB32L
IHB64L
IHB48L
Mounting accessories
Type Description Length Type of mounting Order No.
IHBP1 KIT suspension set (8L bis 32L) ¾¨ pendant mount
¾¨ pendant mount IHBP1 KIT
IHBP2 KIT suspension set (48L bis 64L)¾¨ pendant mount
¾¨ pendant mount IHBP2 KIT
IHBJ1 KIT suspension set 48¨ 3,657 mm Jack chain IHBJ1 KIT
IHBJ2 KIT suspension set 72¨ 5,486 mm Jack chain IHBJ2 KIT
IHBJ3 KIT suspension set 96¨ 7,315 mm Jack chain IHBJ3 KIT
IHBJ4 KIT suspension set 120¨ 9,144 mm Jack chain IHBJ4 KIT
IHBJ5 KIT suspension set 144¨ 10,972 mm Jack chain IHBJ5 KIT
IHBA1 KIT suspension set 40¨ 3,048 mm Aircraft cable IHBA1 KIT
IHBA2 KIT suspension set 80¨ 6,096 mm Aircraft cable IHBA2 KIT
IHBA3 KIT suspension set 120¨ 9,144 mm Aircraft cable IHBA3 KIT
IHBA4 KIT suspension set 180¨ 13,716 mm Aircraft cable IHBA4 KIT
Suspension set with Jack chain
Suspension set with aircraft cable
Suspension set for pendant mounting
Additional mounting material on request
14 EATON
25,4
339,3 92,2
107,5
478,3
Dimension drawing / Polar curveIHB LED for light industrial applications indoor
Polar curve wide-angle IHB16L . 64L LED
C 0C90 l/cd/klm
200
400
600
800
1000
90
75
60
45
3015
015
30
45
60
75
90
Dimension drawing / Polar curve
C 0C90 l/cd/klm
75
150
225
300
375
90
75
60
45
3015
015
30
45
60
75
90
Dimension drawing IHB16L LED
25,4
517 92,2
107,5
478,3
Dimension drawing IHB24L LED
25,4
694,9 92,2
107,5
478,3
Dimension drawing IHB32L LED
25,4
1052.6 92,2
107,5
478,3
Dimension drawing IHB48L LED
25,4
1407,8 92,2
107,5Dimension drawing IHB64L LED
478,3
Dimensions in mm
Polar curve narrow-angle IHB16L . 64L LED (on request)
EATON 15
Technical dataIHB LED for light industrial applications indoor
Technical data
IHB16L/UNV1 IHB24L/UNV1 IHB32L/UNV1
Permissible ambient temperature -40 °C up to +60 °C -40 °C up to +60 °C -40 °C up to +60 °C
Lifetime fixtures L80 B10 - 120,000 h at ta = +25 °C L80 B10 - 65,000 h at ta = +40 °C
L80 B10 - 120,000 h at ta = +25 °C L80 B10 - 65,000 h at ta = +40 °C
L80 B10 - 120,000 h at ta = +25 °C L80 B10 - 65,000 h at ta = +40 °C
Rated voltage 100 - 277 V AC; 127 - 250 VDC 100 - 277 V AC; 127 - 250 VDC 100 - 277 V AC; 127 - 250 VDC
Frequency 50 - 60 Hz 50 - 60 Hz 50 - 60 Hz
Power 145 W 216 W 289 W
Circuit electronic driver electronic driver electronic driver
Lamp / Illuminant LED, scope of delivery LED, scope of delivery LED, scope of delivery
Light colour 5000 K / Ra 80 5000 K / Ra 80 5000 K / Ra 80
Optic wide-angle (narrow-angle on request) wide-angle (narrow-angle on request) wide-angle (narrow-angle on request)
Rated luminous flux of the luminaire 16.900 lm 25.350 lm 33.800 lm
Dimensions (L x W x H) 478 x 339 x 108 mm 478 x 517 x 108 mm 478 x 695 x 108 mm
Terminals L, N, PE, max. 1 x 2,5 mm2
Terminals for dimmer, 2 x 2,5 mm2 max.L, N, PE, max. 1 x 2,5 mm2
Terminals for dimmer, 2 x 2,5 mm2 max.L, N, PE, max. 1 x 2,5 mm2
Terminals for dimmer, 2 x 2,5 mm2 max.
Enclosure colour grey grey grey
Enclosure material anodised aluminium anodised aluminium anodised aluminium
Weight 7,7 kg 12,3 kg 16,3 kg
Protective cover / protective bowl tempered glass, clear 1) tempered glass, clear 1) tempered glass, clear 1)
1) Opaque cover and cover in polycarbonate on request
Additional mounting material on request
Technical data
IHB48L/UNV1 IHB64L/UNV1
Permissible ambient temperature -40 °C up to +60 °C -40 °C up to +60 °C
Lifetime fixtures 120,000 h at ta = +25 °C 65,000 h at ta = +40 °C
120,000 h at ta = +25 °C 65,000 h at ta = +40 °C
Rated voltage 100 - 277 V AC; 127 - 250 VDC 100 - 277 V AC; 127 - 250 VDC
Frequency 50 - 60 Hz 50 - 60 Hz
Power 436 W 582 W
Circuit electronic driver electronic driver
Lamp / Illuminant LED, scope of delivery LED, scope of delivery
Light colour/CRI 5000 K / Ra 80 5000 K / Ra 80
Optik wide-angle (narrow-angle on request) wide-angle (narrow-angle on request)
Rated luminous flux of the luminaire 50.700 lm 67.600 lm
Dimensions (L x W x H) 478 x 1053 x 108 mm 478 x 1407 x 108 mm
Terminals L, N, PE, max. 1 x 2,5 mm2
Terminals for dimmer, 2 x 2,5 mm2 max.L, N, PE, max. 1 x 2,5 mm2
Terminals for dimmer, 2 x 2,5 mm2 max.
Enclosure colour grey grey
Enclosure material anodised aluminium anodised aluminium
Weight 24,5 kg 33,6 kg
Protective cover / protective bowl tempered glass, clear 1) tempered glass, clear 1)
16 EATON
Changes to the products, to the information contained in this document, and to prices are reserved; so are errors and omissions. Only order confirmations and technical documentation by Eaton is binding. Photos and pictures also do not warrant a specific layout or functionality. Their use in whatever form is subject to prior approval by Eaton. The same applies to Trademarks (especially Eaton, Moeller, and Cutler-Hammer). The Terms and Conditions of Eaton apply, as referenced on Eaton Internet pages and Eaton order confirmations.
Eaton1000 Eaton BoulevardCleveland, OH 44122United StatesEaton.com
© 2015 Eaton CorporationAll Rights ReservedPrinted in GermanyPublication No. BR 300 8000 2263 August 2015
Eaton’s Crouse-Hinds Division1201 Wolf StreetSyracuse, NY 13208(866) [email protected]
For more information:If further assistance is required, please contact an authorized Eaton Distributor, Sales Office, or Customer Service Department.
U.S. (Global Headquarters): Eaton's Crouse-Hinds Division
1201 Wolf Street Syracuse, NY 13208
(866) 764-5454 FAX: (315) 477-5179 FAX Orders Only: (866) 653-0640
Eaton is a registered trademark.
All other trademarks are property of their respective owners.
Eaton’s Crouse-Hinds Division
The safety you rely on.See the complete offering of Hazardous and Industrial Products at www.crouse-hinds.de.
Eaton’s Crouse-Hinds Division
Neuer Weg – Nord 49 D-69412 Eberbach
Phone +49 (0) 6271/806-500 Fax +49 (0) 6271/806-476 E-mail [email protected] Internet www.crouse-hinds.de
Australia Phone +61-2-8787-2777 Fax +61-2-9609-2342 [email protected]
China Phone +86-21-2899-3600 Fax +86-21-2899-4055 [email protected]
Great Britain Phone +44-247-630-89 30 Fax +44-247-630-10 27 [email protected]
India Phone +91-124-4683888 Fax +91-124-4683899 [email protected]
Canada Toll Free +1-800-265-0502 Fax +1-800-263-9504 Fax orders only: +1-866-653-0645
Korea Phone +82-2-3484-6783 Fax +82-2-3484-6778 CCHK-sales@ cooperindustries.com
Mexico/Latin America/ Caribbean Phone +52-555-804-4000 Fax +52-555-804-4020 [email protected]
Spain Phone +34-9-37362710 Fax +34-9-37835055 sales.CCH.es@ cooperindustries.com
Middle East (Dubai) Phone +971-4-427-2522 / 2500 Fax +971-4-429-8521 [email protected]
The Netherlands Phone +31-10-2452145 Fax +31-10-2452121 [email protected]
Norway Phone +47-32-244600 Fax +47-32-244646 [email protected]
Singapore: Phone +65-6645-9888 Fax +65-6297-4819 [email protected]
Turkey Phone +90-216-464-20-20 Fax +90-216-464-20-10 [email protected]
Russia Phone +7-495 510-24-27 Fax +7-495 510-24-28 [email protected] www.cooper-russia.ru