+ All Categories
Home > Documents > SIEMENS SGT800 - Francesco · PDF fileDesign Performance Fabrication Logistic On Site Assembly...

SIEMENS SGT800 - Francesco · PDF fileDesign Performance Fabrication Logistic On Site Assembly...

Date post: 15-Mar-2018
Category:
Upload: phamminh
View: 219 times
Download: 4 times
Share this document with a friend
8
SIEMENS SGT800 Gas Turbine Exhaust System
Transcript
Page 1: SIEMENS SGT800 - Francesco · PDF fileDesign Performance Fabrication Logistic On Site Assembly Installation Operation The SGT800 Exhaust System whether in Simple or Combined Cycle

SIEMENS SGT800Gas Turbine Exhaust System

Page 2: SIEMENS SGT800 - Francesco · PDF fileDesign Performance Fabrication Logistic On Site Assembly Installation Operation The SGT800 Exhaust System whether in Simple or Combined Cycle

Design Performancemade to fit

Page 3: SIEMENS SGT800 - Francesco · PDF fileDesign Performance Fabrication Logistic On Site Assembly Installation Operation The SGT800 Exhaust System whether in Simple or Combined Cycle

RESONABTOR®the ultimate 3-D sound attenuation

Performance as an anechoic chamber. This pioneering technology is lowering: the sound emission, the back pressure and your investment.

Page 4: SIEMENS SGT800 - Francesco · PDF fileDesign Performance Fabrication Logistic On Site Assembly Installation Operation The SGT800 Exhaust System whether in Simple or Combined Cycle

Secret Insidemakes it quiet

Page 5: SIEMENS SGT800 - Francesco · PDF fileDesign Performance Fabrication Logistic On Site Assembly Installation Operation The SGT800 Exhaust System whether in Simple or Combined Cycle

Nothing else than performance counts. Get off to a completely maintenance –free technology.

Fascinating PerformanceThe counter-weight balanced Diverter

Page 6: SIEMENS SGT800 - Francesco · PDF fileDesign Performance Fabrication Logistic On Site Assembly Installation Operation The SGT800 Exhaust System whether in Simple or Combined Cycle

Design Performance Fabrication Logistic

On Site Assembly Installation Operation

The SGT800 Exhaust Systemwhether in Simple or CombinedCycle operates with low backpressure, high sound attenuationand very low maintenance costover its entire life time.

The high quality standard isguaranteed by best fabricationpractice. From three fabricationhubs the SGT800 Exhaust Systemis delivered: Europe, Asia andRussia.

Pack & Go™ Technology – thesophisticated transport methodmakes sea-freight containertransport possible to any place inthe world.

Pack & Go™ stands for a modularpanel system, whether round orrectangular. No welding at site,simply bolting panels to eachother, only possible by a worldclass designed insulation claddingsystem.

More than thirty years of siteexperience, competent engineeringand pioneer work make us a reliablepartner. Integrity, well trained staffand a unique passion for our workhallmarks us. We make it in time.

In house CFD flow modulation andacoustic computation guaranteecustomers expected performance.

Page 7: SIEMENS SGT800 - Francesco · PDF fileDesign Performance Fabrication Logistic On Site Assembly Installation Operation The SGT800 Exhaust System whether in Simple or Combined Cycle

Technical Data

Design & Operation Parameters

Ambient Temperature 15 °C

Design Temperature 630 °C

Operating Temperature 600 °C

Design Pressure 5000 Pa

Operating Pressure 3500 Pa

Mass Flow max. 141 kg/sec

Dimensions

ID height 3000 mm

ID width 3000 mm

Diverter overall length* 5600 mm

ID Stack* 3000 mm

Stack height* 30000 mm

Material

Casing S235JR/A36

Insulation RCF 128 kg/m³ or CF bio soluble 128 kg/m³

Cladding SS409/1.4512

Silencer

RESONABTOR® 32 pcs

Pressure Drop 278 PA

Thermal & Acoustic Radiation

Thermal radiation side wall 265 W/m²

Acoustic radiation 1 m distance, 1,5 m height <80 dB(A)

Acoustic performance (Cladding Plate Resonator) DIL > 9 dB(A)

Operation

Internal Volume total ca. 280 m³

Recommended ventilation time before GT start-up min. 5 times the volume

PACK & GO™

Complete transport volume 7 units 40 FT Sea-Freight Containers

Total weight ca. 72000 kg

* other sizes and configuration see SGT800 Price List

Page 8: SIEMENS SGT800 - Francesco · PDF fileDesign Performance Fabrication Logistic On Site Assembly Installation Operation The SGT800 Exhaust System whether in Simple or Combined Cycle

COMPACT Global GmbHBahnhofstrasse 8a

6922 Wolfurt

Austria

[email protected]

Phone: + 43 (0) 5574 53113-10

Fax: + 43 (0) 5574 53113-19

© COMPACT Global 2016 – all rights reserved www.compact-global.com


Recommended