Tel: 0333 202 6800 www.plaswoodgroup.com
[email protected], Derbyshire DE75 7RG
Non-Absorbing Recycled Weather Proof
4 Tough 4 Durable 4 Strong 4 Wide Range
4 Versatile 4 Environmentally Friendly 4 Low Maintenance Jet Black Earth Brown
All sizes for fully fabricated items. All dimensions are subject to a tolerance of + or - 3%. Coloured Plaswood is manufactured from mixed waste plastic which can result in slight colour variation.
Plaswood Product Range - SIGNAGE
Plaswood recycled plastic signposts are an important feature of any well planned street, park, nature reserve or public area. Our recycled plastic furniture will not rot, splinter, crack or degrade with age. Our signage designs can be customised to your needs, and are also available with memorial plaques or corporate logo.
Plaswood signs have attained a high level of credibility since their initial development in 1984 and have proven to be the ‘green alternative’ to timber, metal and concrete signs. They require no maintenance and have no scrap value.
Ever lasting
Signage
Also Available4 Waymarker Posts4 Street Name Plates4 Information Boards4 Management Posts4 Nature Reserve Signs4 Nature Trail Signs 4 Roundabout Sponsorship
Plaswood Range4 Signage4 Planters4 Litter Bins4 Picnic Tables4 Lumber & Fencing4 Bollards & Gates
Also Available4 Waymarker Posts4 Street Name Plates4 Information Boards4 Management Posts4 Nature Reserve Signs4 Nature Trail Signs 4 Roundabout Sponsorship
Plaswood Range4 Signage4 Planters4 Litter Bins4 Picnic Tables4 Lumber & Fencing4 Bollards & Gates
Tel: 0333 202 6800 www.plaswoodgroup.com
[email protected], Derbyshire DE75 7RG
Non-Absorbing Recycled Weather Proof
Plaswood Product Range - SIGNAGE
Ever lasting
Signage
FINGER POST INSTALLATION
An average below ground depth of 650mm leavingenough space, approximately the width of the post,either side of where the post is to be placed. As the hole is
thoroughly compact around the base of the post.
Long nails or metal pegs could be used to key the post into the concrete. This will also aid stability. It is recommended
into the post, three quarter through, and then glued and secured with two dowels.
ADDITIONAL OPTIONS
Corporate logos can also be added, along withvarious text and font styles.
FINGER SIGNAGE POSTS
STREET NAME PLATES INSTALLATION
80mm square posts (legs of the sign) require a 450mm square x 450mm deep area, to both legs, for installation.
long nails or metal peg, to key into the concrete and aid stability. Posts would either be mortised or plain, depending on whether the backboards need to be recessed into the
ADDITIONAL OPTIONS
logos can also be added, along with various text and font
Information Boards, Management Posts, Nature Reserve Signs, Nature Trail Signs and Roundabout Sponsorship Signs, which are all suitable for any outdoor environment.
STREET NAME PLATES
WAY MARKER SIGNS AND INFORMATION BOARDS
A concrete foundation setting is recommended with a minimum of 500mm of the Plaswood post below the ground. Average waymarker sits around
could be used to key the post into the concrete. This will also aid stability.
ADDITIONAL OPTIONS
signs product. Corporate logos can also be added, along with various text and font styles.
WAY MARKER SIGNS & BOARDS