1

12’ SIGNATURE TRUCK SYSTEMS LPG TECHNICIANS SERVICE BODY FOR 19,000 GVW VEHICLES

1 TON 84” CA, 164” WB (ABOVE SHOWN WITH 6,000 POUND VENTURO CRANE)

1.800.454.1122 www.signaturetruck.com

2

Storage boxes conveniently located on one

side; 58” H x 48" W x 14” D aluminum inlaid

compartment and 36” H x 48" W x 14” D

aluminum toolbox

LED Cabinet lights have in-dash switch

Rumber® floor

3 - D-rings flush mounted in the platform floor.

Bed is designed to carry (2) 500 WC tanks and

trencher

58” H x 48" W x 14” D aluminum inlaid

compartment with 2 storage shelves

Center top mounted LED cabinet light

Removable top shelf with one floating hook

provided for hanging copper or other items

Spacious lower compartment 24” deep, very

suitable for oversized items

Heavy duty bulk head with an expanded

aluminum rear window

Dual Betts spotlights

Standard grab handle mounted on outside

vertical post of bulkhead with two step pull

out step

36” H x 48" W x 14” D aluminum toolbox

mounted on the platform next to inlaid box

3 drawer unit with 36 compartments

Center mounted LED cabinet light in swing up

door

Two upper shelves for additional items

Optional six capacity tool holder for shovel, rake

and 6’ level

3

Convenient flip down work bench Optional two piece 42” x 10’ removable aluminum

side rails – Other sizes available

Large 24 capacity aluminum cement block box

mounted below the platform on the opposite side of the crane

Optional Thieman Tailgates available (Model

TT15ET-60x26+5 with a grated platform shown)

Optional boom stow safety Optional front mounted electric winch. Shown

in photo is the Ramsey QM 8000

4

Optional custom inlaid rear steps with cover used

with optional lift gate Optional pull out plastic piping riser storage tray

Optional flush mounted aluminum flip

up tank saddles

Optional console box with cup holders and

storage trays

Optional rear vision camera

5

LINEBACKER Custom Aluminum Platform Body 2012

• 12’ long x 96” wide heavy duty Aluminum Linebacker body with 12” on-center cross members with Rumber® platform deck

• Heavy duty bulk head with an expanded aluminum rear window • Venturo 6,000 hydraulic crane model # HT40KX with a 20 foot reach mounted on the street side rear. Hydraulic extension

to 16’ and manual to 20’.

• Base radio crane remote control for crane operation

• PTO, PTO pump and hydraulic tank unit

• Manual out 1-side, hydraulic up/down outriggers

• 3 - D-rings flush mounted in the platform floor • 58” H x 48" W x 14” D aluminum inlaid compartment with 2 storage shelves • 36” H x 48" W x 14” D aluminum toolbox mounted on the platform next to inlaid box • 3 Drawer – 36 Compartment Parts storage system and cabinet lights • Flip down work bench • Vertical E-Track on the side rails and bulkhead • Large capacity aluminum cement block box mounted below the platform on the curb side • 4 - Flip style 1075 placards mounted an all four sides of the vehicle • Shovel/rake holder mounted on the front bulkhead • 12 volt power lead harness at the rear to operate a tank setting hoist • Removable Rigid pipe vise and curb side mounted flip down pipe holder • LED lighting kit with dual work spotlights on the bulk head • Wheel chock blocks with holder • Fire extinguisher, bracket and cover mounted on body • Triangle and first aid kit in cab • DOT Inspection on chassis

AVAILABLE OPTIONS • Winch with front and rear mounting hardware

• Shovel/Rake/Level Holder, mounted front of bulk head

• Aluminum center console with cup holders and storage trays • Removable aluminum side rails 24”x10’

• Bulk head mounted J hooks

• Custom inlaid rear step with cover

• Pull out step and grab handle

• Cab stirrup step

• Flush mounted aluminum flip up saddles

• Swivel spot work light

• Pull out plastic piping riser storage tray

• Rear backup color camera

• Pipe carrier rack

• Crane pedestal cover

• Above cab plastic tubing box

• Copper storage box

• Boom stow safeties

• Hydraulic crane extension from 16 ft. to 20 ft.

• Full hydraulic outriggers with up/down and in/out controls

• Corded crane remote in addition to the radio remote

• Venturo 5000 Hydraulic Crane Model HT30KX with hydraulic extension to 16’, manual to 20’

• Venturo 6000 Hydraulic Crane Model HT40KX – Proportional with hydraulic extension to 20’

• Removable aluminum side rails 42”x10’

• Thieman TT15ET 6026+5 standard lift gate installed

• Thieman TT15ET 6026+5P galvanized bar grate platform with powder coat construction installed

• Thieman TT16ET 6430+5 galvanized bar grate platform with powder coat construction installed

• Outrigger stow safeties

• Hydraulic fluid level and temperature monitor

• 5% Kit – 2 - lifting slings, 2 – DOT ratchet tie downs and 2 - lightweight aluminum tank saddles