“SILPA” Ltd. was found in the beginning of
2004 year and it became a fast developing Bul-
garian-Italian Company with Italian shareholder
“KLIMA 2000”. “SILPA” Ltd. is situated in area
from 60 000 m2, 10 000 m2 of them are workshops
with local air-conditioned system. In the begin-
ning of 2005 part of Italian producing capacity is
moved to Bulgaria.
“SILPA” Ltd. starts to produce fan-coils with
trade brand “KLIMA 2000” and cooperating pro-
duction of gas handling boilers with RIELLO-Po-
land and RIELLO-Italy. Main applications: Injec-
tion molding of thermoplastic parts, metal sheets
shearing and assembly lines, realization of own
fan-coil and heating elements and white brands.
“SILPA” Ltd is located in the city of Lom. Lom
Municipality is situated in northwestern Bulgaria
and is the second biggest municipality in Montana
District in terms of both territory and population.
It is crossed by international road Е-79 - Euro-
corridor No. 4, which connects Western Europe
and the White Sea.
Lom is the second biggest river port in Bulgaria
with the largest natural firth. It is an integral part
of the trans-european network for combined trans-
port - Rhein- Mein - the Danube, a crossing point
of the European corridors No. 4 and No. 7.
Of strategic importance is also the railway line
Lom - Sofia, which is the shortest railway connec-
tion from the Danube to Sofia.
For providing the production of metal sheets, we
have at our disposal a wide gamut of technical equip-
ment.
Some of other machines in the factory are:
• Guillotine to 4mm thickness and to 2000mm
length;
• Cutting machines to 220mm;
• Plasma Cutting machines to 15mm;
• Oxyacetylene torch to 80mm;
• Spot-welding 3+3mm;
Powder painting work shop is equipped with:
• ITW GEMMA Plant-made in Switzerland for
powder painting.
• Static plant for finishing , composed by flash
period (max. temperature 50 °) and furnace(max.
temperature 200 °)
The company produces 6 models of fan-coils with 7
sizes of air-flow from 190 up to 1350 cu.mt/h. and 2
different series.
We intend to begin the production of fan-coils for in-
dustrial use till the end of 2006.
The capacity of our company is big and we are still
able to realize the requested production in time. But the
increasing of the fan-coils’ applying in the field of heat-
ing, ventilation and air-conditioning and the strength-
ened position of KLIMA 2000 as a preferred brand,
defines the need of one more line. The put in action of
this new line is expected till the end of this year.
The high quality of the products we create for our
customers is very important for us. That’s why, we
control every production stage from the prime mate-
rial, through the equipment and facilities, the qualified
employees, up to the end product and its delivery.
Since the beginning of 2006 the company has at its disposal 3 machines for producing of thermoplas-
tic parts. Till the end of this year we intend to equip the workshop with another 3 machines. The big-gest of these 6 presses will be with size of the board 1100mmx1100mm.All the presses will be fully automated.
The thermoplastic parts, manufactured by SILPA Ltd are put in already existing products, established on the market. Through the manufacturing of these articles, our factory will reduce their prime cost, it will make them cheaper for the clients and as a result will raise the company’s competitiveness. The manufacturing of accessories and elements, put
into the fan-coils is applied till the moment. The im-pending is producing of the control panel for the wall-hanging gas boilers, offered by Riello up to now.
The fan-coil is intended for all-year air condition-ing of one-family houses as well as offices, public buildings, covered markets and production halls.
The fan-coil is an appliance, which successfully replaces the regular radiator and the air conditioner, combined in one body.
It is a part of an air conditioning system.The fan-coil has a smooth design and combines
well with any interior. There are also models intend-ed for hidden installation, which renders the system completely invisible for the users, leaving them with a pleasant sense of comfort.The use of high-quality components ensures silent and effective functioning, as well as a long lifetime.
The capacity of the fan-coils is considerably bigger than that of the regular radiator of natural convec-tion so that the desired temperature is reached in a matter of minutes after the appliance has been turned on.Just like the air conditioner, the fan-coil is sup-plied with a filter for air treatment.
The fan-coil is one practical and highly effective solution to reduce high energy cost. Fan-coil sys-tems can be designed and installed to create a num-ber of zones by running multiple, smaller fan-coils from one hot water tank, allowing variable heating demands in the hose to be met.The presence of a fan allows you to install the “KLIMA 2000” fan-coils in the most convenient location without taking up your living space. You could even install your fan-coil in a suspending ceiling, so that the system would re-main completely invisible.
The fan-coils produced by
SILPA ltd. are certificated
in EUROVENT.
SILPA ltd. performs through
product quality control
using various
environmental tests.
The “KLIMA 2000” series focused its attention on design, optimization of practicality as well as on noise level
reduction.
This fan-coil based on a traditional technology, offers excellent environmental comfort.
The “KLIMA 2000” is the ideal equipment for offices and houses, is no longer a simple technical product but
also a furnishing element that can give added value to the aesthetics of the surroundings.
Every detail has been carefully studied to guarantee easy assembly, use and maintenance of fan-coils, like for
instance the fictional symmetric feet and easy access to the filter in all models. Moreover each version has the
same internal structure, identical in both horizontal and vertical models, in order to standardize production and
guarantee a greater flexibility in distribution and installation.
There is an option to integrate a control panel in the
unit, fully automatic and needs only to be connected
to the electrical supply. The “KLIMA 2000” system
offers the opportunity to be connected with a duct, so
easily to provide fresh air in the rooms, offices, restau-
rants where is needed.
The “KLIMA 2000” fan-coil unit can be integrated
behind the wall lining or mounted in a false ceiling,
alternatively on the wall or the ceiling. The stylish cas-
ing allows a wide range of alternatives. Wherever the
“KLIMA 2000” fan-coil unit is eventually installed, it
will do its work effectively and largely unnoticed.
•Heating and cooling in one body
• Greater power in a smaller size
• Free choice of installation
• Better control
• Lower functioning temperature
• Unlimited length of the pipe system
• Smaller water volume in the system
• Greater dynamism of the system
• Better investment