The information and statements herein are believed to be reliable, but no liability for any errors in fact or opinion herein is accepted. It is the sole responsibility of the user to determine the suitability of any information or products referred to herein for their own particular purpose, and JM makes no warranty or representation of fitness for any particular purpose. Johnson Matthey PLC, Advanced Glass Technologies, Orchard Road, Royston, Herts, SG8 5HE, UK Rev.14/02/18 www.matthey.com Technical data FS2 Silver flake Product description FS2 has a highly flaked structure and is suitable for use in a range of passive component and flexible circuitry applications. It is coated with a high level of organic lubricant to make it readily dispersible in a wide range of resin chemistries. Typical properties Tap Density 2.7 g/cm 3 Loss on Ignition [600 o C] 1.2 wt% Specific Surface Area [BET] 1.7 m 2 /g Particle Size [Malvern Mastersizer 2000, dry powder] D90 8.0 μm D50 2.9 μm D10 1.2 μm Particle size 2.0μm x20,000 FS2 Storage & handling It is recommended that the product is stored in tightly sealed containers away from direct sunlight at a temperature in the range of 5 - 25°C (41 - 77°F). Health and safety For detailed health and safety requirements, please consult the appropriate Material Safety Data Sheet.
Transcript
The information and statements herein are believed to be reliable, but no liability for any errors in fact or opinion
herein is accepted. It is the sole responsibility of the user to determine the suitability of any information or
products referred to herein for their own particular purpose, and JM makes no warranty or representation of
fi tness for any particular purpose.
Johnson Matthey PLC, Advanced Glass Technologies, Orchard Road, Royston, Herts, SG8 5HE, UK Rev.14/02/18www.matthey.com
Technical dataFS2Silver fl ake
Product descriptionFS2 has a highly fl aked structure and is suitable for use in a range of passive component and fl exible circuitry applications.
It is coated with a high level of organic lubricant to make it readily dispersible in a wide range of resin chemistries.
Storage & handlingIt is recommended that the product is stored in tightly sealed containers away from direct sunlight at a temperature in the range of 5 - 25°C (41 - 77°F).
Health and safetyFor detailed health and safety requirements, please consult the appropriate Material Safety Data Sheet.
The information and statements herein are believed to be reliable, but no liability for any errors in fact or opinion
herein is accepted. It is the sole responsibility of the user to determine the suitability of any information or
products referred to herein for their own particular purpose, and JM makes no warranty or representation of
fi tness for any particular purpose.
Johnson Matthey PLC, Advanced Glass Technologies, Orchard Road, Royston, Herts, SG8 5HE, UK Rev.14/02/18www.matthey.com
Technical dataFS8Silver fl ake
Product descriptionFS8 is a highly electrically conductive silver fl ake suitable for use in polymer thick fi lm inks and the manufacture of RFI / EMI shielding paints.
Storage & handlingIt is recommended that the product is stored in tightly sealed containers away from direct sunlight at a temperature in the range of 5 - 25°C (41 - 77°F).
Health and safetyFor detailed health and safety requirements, please consult the appropriate Material Safety Data Sheet.
The information and statements herein are believed to be reliable, but no liability for any errors in fact or opinion
herein is accepted. It is the sole responsibility of the user to determine the suitability of any information or
products referred to herein for their own particular purpose, and JM makes no warranty or representation of
fi tness for any particular purpose.
Johnson Matthey PLC, Advanced Glass Technologies, Orchard Road, Royston, Herts, SG8 5HE, UK Rev.14/02/18www.matthey.com
Technical dataFS32Silver fl ake
Product descriptionFS32 is a reduced surfactant version of FS2. Consequently it is particularly suitable for applications where a very high level of conductivity is required, including polymer thick fi lm.
It is highly compatible with commonly used resin chemistries.
Storage & handlingIt is recommended that the product is stored in tightly sealed containers away from direct sunlight at a temperature in the range of 5 - 25°C (41 - 77°F).
Health and safetyFor detailed health and safety requirements, please consult the appropriate Material Safety Data Sheet.
The information and statements herein are believed to be reliable, but no liability for any errors in fact or opinion
herein is accepted. It is the sole responsibility of the user to determine the suitability of any information or
products referred to herein for their own particular purpose, and JM makes no warranty or representation of
fi tness for any particular purpose.
Johnson Matthey PLC, Advanced Glass Technologies, Orchard Road, Royston, Herts, SG8 5HE, UK Rev.14/02/18www.matthey.com
Technical dataFS34Silver fl ake
Product descriptionFS34 is suitable for use in polymer thick fi lm ink applications.
It is particularly compatible with epoxy-based formulations.
Storage & handlingIt is recommended that the product is stored in tightly sealed containers away from direct sunlight at a temperature in the range of 5 - 25°C (41 - 77°F).
Health and safetyFor detailed health and safety requirements, please consult the appropriate Material Safety Data Sheet.
The information and statements herein are believed to be reliable, but no liability for any errors in fact or opinion
herein is accepted. It is the sole responsibility of the user to determine the suitability of any information or
products referred to herein for their own particular purpose, and JM makes no warranty or representation of
fi tness for any particular purpose.
Johnson Matthey PLC, Advanced Glass Technologies, Orchard Road, Royston, Herts, SG8 5HE, UK Rev.14/02/18www.matthey.com
Technical dataFS36Silver fl ake
Product descriptionFS36 is a fi ne silver fl ake and is suitable for use in non-fi red inks.
It is particularly suited for use with epoxy-based resins.
Storage & handlingIt is recommended that the product is stored in tightly sealed containers away from direct sunlight at a temperature in the range of 5 - 25°C (41 - 77°F).
Health and safetyFor detailed health and safety requirements, please consult the appropriate Material Safety Data Sheet.
The information and statements herein are believed to be reliable, but no liability for any errors in fact or opinion
herein is accepted. It is the sole responsibility of the user to determine the suitability of any information or
products referred to herein for their own particular purpose, and JM makes no warranty or representation of
fi tness for any particular purpose.
Johnson Matthey PLC, Advanced Glass Technologies, Orchard Road, Royston, Herts, SG8 5HE, UK Rev.14/02/18www.matthey.com
Technical dataTS2222Silver fl ake
Product descriptionTS2222 is a highly fl aked silver with excellent electrical conductivity and compatibility with a wide range of resins.
It is suitable for use in tantalum capacitor electrode terminations and electrically conductive inks.
Storage & handlingIt is recommended that the product is stored in tightly sealed containers away from direct sunlight at a temperature in the range of 5 - 25°C (41 - 77°F).
Health and safetyFor detailed health and safety requirements, please consult the appropriate Material Safety Data Sheet.
The information and statements herein are believed to be reliable, but no liability for any errors in fact or opinion
herein is accepted. It is the sole responsibility of the user to determine the suitability of any information or
products referred to herein for their own particular purpose, and JM makes no warranty or representation of
fi tness for any particular purpose.
Johnson Matthey PLC, Advanced Glass Technologies, Orchard Road, Royston, Herts, SG8 5HE, UK Rev.14/02/18www.matthey.com
Technical dataTS2223Silver fl ake
Product descriptionTS2223 is a highly fl aked silver with excellent electrical conductivity and compatibility with a wide range of resins.
It can be used in a variety of low-fi red applications including passive component and adhesive products.
Storage & handlingIt is recommended that the product is stored in tightly sealed containers away from direct sunlight at a temperature in the range of 5 - 25°C (41 - 77°F).
Health and safetyFor detailed health and safety requirements, please consult the appropriate Material Safety Data Sheet.
