SIMONA Spigot Fittings and Associated Accesories...SIMONA® Spigot Fittings SIMONA is an...

SIMONA Spigot Fittings and Associated Accesories

SIMONA SPIGOT FITTINGS AND ASSOCIATED ACCESORIES

111

SIMONA – Global Thermoplastic Solutions

SIMONA AG is one of the leading manufacturers and development partners of high quality thermoplastic products with production facilities and sales offices around the globe. They offer best-in-class solutions for your applications in the chemical process industry, water and energy utilities, commodity supply and mobility as well as the environmental technology and construction sectors.

SIMONA® Spigot Fittings

SIMONA is an acknowledged system supplier and one-stop manufacturer of piping systems designed for sustained efficiency and reliability in the field of water utilities, water disposal and industry. SIMONA® Piping Systems combine excellent flexibility and durability with outstanding functionality.

Headquartered in Kirn (Germany), SIMONA® Spigot Fittings are manufactured in Germany and made to exacting product and quality standards.

With an extensive range of spigot fittings from DN20 to DN1200, SIMONA® Products are available for your application.

For more information visit www.simona.de

Plasson is proud to be the exclusive Australian distributor for SIMONA® Spigot Fittings and is committed to holding the widest range and most comprehensive stock holding in the country.

Backed with Plasson technical, sales and logistics support you will get the right SIMONA®

Product, at the right price, where and when you need it!

Trust the SIMONA and Plasson partnership!

112

TSTF TG TM TN

LB

PE STUB FLANGE

BACKING FLANGE

PE PIPE

MATING METALFLANGE

SEALING GASKET

LT TS= STUB THICKNESSTG= GASKET THICKNESSLB= BOLT LENGTHLT= THREAD LENGTHTM= MATING FLANGE THICKNESSTF= FLANGE THICKNESS

STUB FLANGE SYSTEMS

A typical stub flange systems is shown below.

BOLT TYPE

NUTLENGTH

THREADLENGTH

M12 10.8 27M16 14.8 37M20 18 45M24 21.5 53.75M27 24 60M30 25.6 641/2” 10.8 275/8” 14.8 37

Calculating the required bolt length of a stub flange system is dependent on the dimensions of the components shown in the above picture. This catalogue shows Stub (TS), Flange (TF) and Gasket (TG)thicknesses.

Metric Bolts are used with Table D and E, PN16 and PN21 flanges. These bolts have a fixed thread length and selecting the right length of bolt is important to ensure the nut has sufficient length to tighten the system.

The minimum length of the bolt must be greater than the thickness of all components combined while allowing sufficient thread for the nut to tighten onto.

LB – L T > TF + TS + TG + TM

The maximum length of the bolt must ensure that the nut doesn’t bottom out on the thread of the bolt before sufficiently tightening the system. Usually 1.5x the nut length is allowed for tightening.

LB – (1.5 x TN) < TF + TS + TG + TM

Metric Studs are typically used instead of bolts with PN35 flanges. Studs are threaded along the entire length and there is, therefore, no maximum length.The minimum length of the stud is determined by the same method as for Bolts.

Lengths listed in this catalogue are theoretical and have not made any provision for system compression or any tolerances. Please consult the relevant standards to ensure that the selected bolts are suitable for your application.

Plasson offers M12 bolts for 1/2” and M16 for 5/8”

Plasson Australia Pty LtdWholesale prices do not include 10% GST 113

FITTINGS FOR ELECTROFUSION AND BUTTWELD

STUB FLANGE FOR ISO/DIN/AS, LONG SPIGOT

TS

SIZE 1 THICKNESS (TS)

MANU� METHOD SDR PACK

QTY CODE PRICE

20 9 INJECTED 11 - 8194035 6.4025 9 INJECTED 11 - 8194036 6.5732 10 INJECTED 11 - 8194001 7.6440 11 INJECTED 11 - 8194002 9.0050 12 INJECTED 11 - 8194003 11.4963 14 INJECTED 11 - 8194004 13.3975 16 INJECTED 11 - 8194005 16.8890 17 INJECTED 11 - 8194006 22.15110 18 INJECTED 11 - 8194007 27.66125 25 INJECTED 11 - 8194008 34.12140 25 INJECTED 11 - 8194009 43.71160 25 INJECTED 11 - 8194010 48.87180 30 INJECTED 11 - 8194011 76.88200 32 INJECTED 11 - 8194012 87.78225 32 INJECTED 11 - 8194013 94.41250 35 INJECTED 11 - 8194014 144.88280 35 INJECTED 11 - 8194015 191.49315 35 INJECTED 11 - 8194016 242.91355 40 INJECTED 11 - 8194017 420.18400 46 INJECTED 11 - 8194018 741.04450 60 ELONGATED 11 - 8100515* 1511.92500 60 ELONGATED 11 - 8100516* 1957.87560 60 ELONGATED 11 - 8100517 2099.02630 60 ELONGATED 11 - 8100518 2104.5950 12 INJECTED 17 - 8194019 11.3763 14 INJECTED 17 - 8194020 13.3975 16 INJECTED 17 - 8194021 16.8890 17 INJECTED 17 - 8194022 22.03110 18 INJECTED 17 - 8194023 27.48125 18 INJECTED 17 - 8194024 34.00140 18 INJECTED 17 - 8194025 43.71160 18 INJECTED 17 - 8194026 49.40180 20 INJECTED 17 - 8194027 77.36200 24 INJECTED 17 - 8194028 87.31225 24 INJECTED 17 - 8194029 94.41250 25 INJECTED 17 - 8194030 114.08280 25 INJECTED 17 - 8194031 172.36315 25 INJECTED 17 - 8194032 226.08355 30 INJECTED 17 - 8194033 390.98400 33 INJECTED 17 - 8194034 689.62450 60 ELONGATED 17 - 8100519* 1317.65500 60 ELONGATED 17 - 8100520* 1586.20560 60 ELONGATED 17 - 8100521 1700.63630 60 ELONGATED 17 - 8100522 2043.82

*Available on request

114

CONCENTRIC REDUCER LONG SPIGOT


SIZE 1 SIZE 2 MANU� METHOD SDR PACK

QTY CODE PRICE

25 20 INJECTED 11 - 8100208 5.1532 20 INJECTED 11 - 8100209 5.8632 25 INJECTED 11 - 8100210 5.8640 25 INJECTED 11 - 8100211 8.29

40 32 INJECTED 11 - 8100141 8.2950 25 INJECTED 11 - 8100142 9.8950 32 INJECTED 11 - 8100143 9.8950 40 INJECTED 11 - 8100144 9.8963 32 INJECTED 11 - 8100145 13.3963 40 INJECTED 11 - 8100146 13.3963 50 INJECTED 11 - 8100147 13.3975 50 INJECTED 11 - 8100148 20.6175 63 INJECTED 11 - 8100149 20.6190 50 INJECTED 11 - 8100150 20.6190 63 INJECTED 11 - 8100151 28.0890 75 INJECTED 11 - 8100152 28.08110 63 INJECTED 11 - 8100153 37.32110 75 INJECTED 11 - 8100154 37.32110 90 INJECTED 11 - 8100155 37.32125 63 INJECTED 11 - 8100156 45.07125 90 INJECTED 11 - 8100157 45.07125 110 INJECTED 11 - 8100158 45.07140 90 INJECTED 11 - 8100159 64.80140 110 INJECTED 11 - 8100160 64.80140 125 INJECTED 11 - 8100161 64.80160 90 INJECTED 11 - 8100162 86.71160 110 INJECTED 11 - 8100163 86.71160 125 INJECTED 11 - 8100164 86.71160 140 INJECTED 11 - 8100165 86.71180 90 INJECTED 11 - 8100166 96.90180 110 INJECTED 11 - 8100167 96.90180 125 INJECTED 11 - 8100168 96.90180 160 INJECTED 11 - 8100169 105.31200 140 INJECTED 11 - 8100170 122.61200 160 INJECTED 11 - 8100171 122.61200 180 INJECTED 11 - 8100172 122.61225 160 INJECTED 11 - 8100173 202.69225 180 INJECTED 11 - 8100174 202.69225 200 INJECTED 11 - 8100175 202.69250 160 INJECTED 11 - 8100176 275.48250 180 INJECTED 11 - 8100177 288.22250 200 INJECTED 11 - 8100178 288.22250 225 INJECTED 11 - 8100179 288.22280 200 INJECTED 11 - 8100180 361.90280 225 INJECTED 11 - 8100181 361.90280 250 INJECTED 11 - 8100182 344.78315 225 INJECTED 11 - 8100183 493.75315 250 INJECTED 11 - 8100184 493.75



CONCENTRIC REDUCER LONG SPIGOT CONT�



QTY CODE PRICE

315 280 INJECTED 11 - 8100185 493.75355 250 MACHINED 11 - 8100186 1045.72355 280 MACHINED 11 - 8100187* 1046.02355 315 MACHINED 11 - 8100188 1046.02400 280 MACHINED 11 - 8100189* 1529.04400 315 MACHINED 11 - 8100190 1134.45400 355 MACHINED 11 - 8100191* 1088.84450 280 MACHINED 11 - 8100192* 2305.14450 315 MACHINED 11 - 8100193 2214.34450 355 MACHINED 11 - 8100194 1607.52450 400 MACHINED 11 - 8100195 1516.60500 315 MACHINED 11 - 8100196 2978.72500 355 MACHINED 11 - 8100197 2887.80500 400 MACHINED 11 - 8100198 2410.04500 450 MACHINED 11 - 8100199 2319.36560 355 MACHINED 11 - 8100200* 4905.97560 400 MACHINED 11 - 8100201 4447.64560 450 MACHINED 11 - 8100202* 4356.42560 500 MACHINED 11 - 8100203* 3425.91630 400 MACHINED 11 - 8100204* 5613.30630 450 MACHINED 11 - 8100205* 5613.30630 500 MACHINED 11 - 8100206* 4461.74630 560 MACHINED 11 - 8100207* 4525.5363 32 INJECTED 17 - 8149105* 12.7563 40 INJECTED 17 - 8149106* 13.3963 50 INJECTED 17 - 8149107* 13.3975 63 INJECTED 17 - 8149108 20.6190 50 INJECTED 17 - 8149109* 20.6190 63 INJECTED 17 - 8149110 28.0890 75 INJECTED 17 - 8149111 28.08110 63 INJECTED 17 - 8149112 37.32110 75 INJECTED 17 - 8149113* 37.32110 90 INJECTED 17 - 8149114 37.32125 63 INJECTED 17 - 8149115 45.07125 90 INJECTED 17 - 8149116 45.07125 110 INJECTED 17 - 8149117 45.07140 90 INJECTED 17 - 8149118* 64.80140 110 INJECTED 17 - 8149119* 64.80140 125 INJECTED 17 - 8149120 64.80160 90 INJECTED 17 - 8149121 86.71160 110 INJECTED 17 - 8149122 86.71160 125 INJECTED 17 - 8149123 86.71160 140 INJECTED 17 - 8149124 86.71180 90 INJECTED 17 - 8149125* 96.90


116

CONCENTRIC REDUCER LONG SPIGOT CONT�



QTY CODE PRICE

180 110 INJECTED 17 - 8149126 96.90180 125 INJECTED 17 - 8149127 96.90180 140 INJECTED 17 - 8149128* 105.31180 160 INJECTED 17 - 8149129 105.31200 140 INJECTED 17 - 8149130* 122.61200 160 INJECTED 17 - 8149131 122.61200 180 INJECTED 17 - 8149132* 122.61225 140 INJECTED 17 - 8149133 196.76225 160 INJECTED 17 - 8149134 196.76225 180 INJECTED 17 - 8149135 196.76225 200 INJECTED 17 - 8149136* 196.76250 160 INJECTED 17 - 8149137 267.43250 180 INJECTED 17 - 8149138 279.87250 200 INJECTED 17 - 8149139 279.87250 225 INJECTED 17 - 8149140 279.87280 200 INJECTED 17 - 8149141* 351.36280 225 INJECTED 17 - 8149142* 351.36280 250 INJECTED 17 - 8149143* 334.71315 225 INJECTED 17 - 8149144* 479.35315 250 INJECTED 17 - 8149145* 479.35315 280 INJECTED 17 - 8149146* 479.35355 250 MACHINED 17 - 8149147* 1091.62355 280 MACHINED 17 - 8149148* 1046.02355 315 MACHINED 17 - 8149149 1046.02400 280 MACHINED 17 - 8149150* 1529.04400 315 MACHINED 17 - 8149151 1134.45400 355 MACHINED 17 - 8149152 1088.84450 280 MACHINED 17 - 8149153* 2305.14450 315 MACHINED 17 - 8149154 2214.34450 355 MACHINED 17 - 8149155 1607.52450 400 MACHINED 17 - 8149156 1516.60500 315 MACHINED 17 - 8149157 2978.72500 355 MACHINED 17 - 8149158* 2887.80500 400 MACHINED 17 - 8149159 2410.40500 450 MACHINED 17 - 8149160* 2319.36560 355 MACHINED 17 - 8149161 4905.97560 400 MACHINED 17 - 8149162* 4447.64560 450 MACHINED 17 - 8149163* 4356.42560 500 MACHINED 17 - 8149164* 3425.91630 400 MACHINED 17 - 8149165* 5613.30630 450 MACHINED 17 - 8149166* 5613.30630 500 MACHINED 17 - 8149167* 4461.74630 560 MACHINED 17 - 8149168 * 4525.53



TEE LONG SPIGOT



QTY CODE PRICE

20 - INJECTED 11 - 8103083 8.1125 - INJECTED 11 - 8103084 9.3632 - INJECTED 11 - 8103053 11.0840 - INJECTED 11 - 8103054 13.3350 - INJECTED 11 - 8103055 17.6563 - INJECTED 11 - 8103056 24.0575 - INJECTED 11 - 8103057 36.5590 - INJECTED 11 - 8103058 56.15110 - INJECTED 11 - 8103059 79.61125 - INJECTED 11 - 8103060 112.36140 - INJECTED 11 - 8103061 169.64160 - INJECTED 11 - 8103062 196.82180 - INJECTED 11 - 8103063 278.38200 - INJECTED 11 - 8103064 400.76225 - INJECTED 11 - 8103065 474.68250 - INJECTED 11 - 8103066 673.87280 - INJECTED 11 - 8103067 866.43315 - INJECTED 11 - 8103068 1294.25355 - INJECTED 11 - 8193001 1684.58400 - INJECTED 11 - 8193002* 2517.54450 - INJECTED 11 - 8193003* 3560.12500 - INJECTED 11 - 8193004 4522.6250 - INJECTED 17 - 8103069 16.7063 - INJECTED 17 - 8103070 21.0375 - INJECTED 17 - 8103071 31.5190 - INJECTED 17 - 8103072 47.74110 - INJECTED 17 - 8103073 67.88125 - INJECTED 17 - 8103074 95.48140 - INJECTED 17 - 8103075 145.06160 - INJECTED 17 - 8103076 168.27180 - INJECTED 17 - 8103077 236.86200 - INJECTED 17 - 8103078 338.39225 - INJECTED 17 - 8103079 403.12250 - INJECTED 17 - 8103080 486.70280 - INJECTED 17 - 8103081 738.13315 - INJECTED 17 - 8103082 944.02355 - INJECTED 17 - 8193005* 1369.71400 - INJECTED 17 - 8193006* 1885.55450 - INJECTED 17 - 8193007* 2766.43500 - INJECTED 17 - 8193008* 3561.31


118


REDUCING TEE LONG SPIGOT



QTY CODE PRICE

63 50 INJECTED 11 - 8135030* 26.3675 32 INJECTED 11 - 8135031* 41.1175 50 INJECTED 11 - 8135032* 41.1175 63 INJECTED 11 - 8135033* 41.7090 50 INJECTED 11 - 8135021 54.2090 63 INJECTED 11 - 8135022 58.1690 75 INJECTED 11 - 8135034* 58.52110 63 INJECTED 11 - 8135023 86.12110 75 INJECTED 11 - 8135035* 91.81110 90 INJECTED 11 - 8135024 108.27125 110 INJECTED 11 - 8135036* 119.76160 63 INJECTED 11 - 8135037 234.79160 75 INJECTED 11 - 8135038* 236.80160 90 INJECTED 11 - 8135025 236.80160 110 INJECTED 11 - 8135026 242.67180 160 INJECTED 11 - 8135039* 326.60200 90 INJECTED 11 - 8223001* 454.00200 110 INJECTED 11 - 8223002* 464.25200 160 INJECTED 11 - 8223003* 497.42225 75 INJECTED 11 - 8135040 527.04225 90 INJECTED 11 - 8135027 547.88225 110 INJECTED 11 - 8135028 552.03225 160 INJECTED 11 - 8135029 553.69225 180 INJECTED 11 - 8135041 555.70250 110 INJECTED 11 - 8223007* 660.07250 160 INJECTED 11 - 8223008* 672.92315 110 INJECTED 11 - 8223005* 1596.45315 160 INJECTED 11 - 8223006* 1609.54315 250 INJECTED 11 - 8223004* 1635.3063 50 INJECTED 17 - 8135051* 24.2875 50 INJECTED 17 - 8135052* 36.8475 63 INJECTED 17 - 8135053* 37.1490 50 INJECTED 17 - 8135044 48.6990 63 INJECTED 17 - 8135045 51.8290 75 INJECTED 17 - 8135054* 52.72110 63 INJECTED 17 - 8135046 77.18110 75 INJECTED 17 - 8135055* 90.68110 90 INJECTED 17 - 8135047 99.09125 110 INJECTED 17 - 8135056* 106.97160 63 INJECTED 17 - 8135057 211.34160 75 INJECTED 17 - 8135058* 217.71160 90 INJECTED 17 - 8135048 217.79160 110 INJECTED 17 - 8135049 219.75180 160 INJECTED 17 - 8135059* 293.67200 90 INJECTED 17 - 8223009* 422.67200 110 INJECTED 17 - 8223010* 447.71200 160 INJECTED 17 - 8223011* 467.51225 75 INJECTED 17 - 8135060* 493.75225 90 INJECTED 17 - 8135050 493.75225 110 INJECTED 17 - 8135042 497.18225 160 INJECTED 17 - 8135043 498.37225 180 INJECTED 17 - 8135061 499.20250 110 INJECTED 17 - 8223014* 532.43250 160 INJECTED 17 - 8223015* 543.92315 110 INJECTED 17 - 8223012* 1341.28315 160 INJECTED 17 - 8223013* 1356.74315 250 INJECTED 17 - 8223016 1382.86




90° ELBOW LONG SPIGOT


45° BRANCHES LONG SPIGOT


QTY CODE PRICE

20 - INJECTED 11 - 8192061 7.4025 - INJECTED 11 - 8192062 7.7032 - INJECTED 11 - 8192031 8.1740 - INJECTED 11 - 8192032 10.4850 - INJECTED 11 - 8192033 14.1063 - INJECTED 11 - 8192034 25.4175 - INJECTED 11 - 8192035 33.2990 - INJECTED 11 - 8192036 38.38110 - INJECTED 11 - 8192037 70.60125 - INJECTED 11 - 8192038 89.73140 - INJECTED 11 - 8192039 100.22160 - INJECTED 11 - 8192040 131.49180 - INJECTED 11 - 8192041 147.72200 - INJECTED 11 - 8192042 208.21225 - INJECTED 11 - 8192043 240.60250 - INJECTED 11 - 8192044 400.64280 - INJECTED 11 - 8192045 674.70315 - INJECTED 11 - 8192046 834.0950 - INJECTED 17 - 8192047 12.0863 - INJECTED 17 - 8192048 22.5775 - INJECTED 17 - 8192049 30.2790 - INJECTED 17 - 8192050 34.18110 - INJECTED 17 - 8192051 63.61125 - INJECTED 17 - 8192052 81.03140 - INJECTED 17 - 8192053 99.33160 - INJECTED 17 - 8192054 118.28180 - INJECTED 17 - 8192055 133.03200 - INJECTED 17 - 8192056 181.84225 - INJECTED 17 - 8192057 217.61250 - INJECTED 17 - 8192058 358.58280 - INJECTED 17 - 8192059 540.90315 - INJECTED 17 - 8192060 677.42

SIZE 1 SIZE 2 MANU� METHOD SDR PN

RATING CODE PRICE

63 - INJECTED 11 16 8137001 148.4975 - INJECTED 11 16 8137002 224.1990 - INJECTED 11 16 8137003 346.80110 - INJECTED 11 16 8137004 492.3363 - INJECTED 17 10 8137005 133.7475 - INJECTED 17 10 8137006 201.9890 - INJECTED 17 10 8137007 312.15110 - INJECTED 17 10 8137008 443.11

120


45° ELBOW LONG SPIGOT

90° BEND LONG SPIGOT



QTY CODE PRICE

20 - INJECTED 11 - 8192063 8.7125 - INJECTED 11 - 8192064 9.0632 - INJECTED 11 - 8192001 10.0740 - INJECTED 11 - 8192002 12.5650 - INJECTED 11 - 8192003 14.2763 - INJECTED 11 - 8192004 25.4175 - INJECTED 11 - 8192005 34.1290 - INJECTED 11 - 8192006 38.38110 - INJECTED 11 - 8192007 62.13125 - INJECTED 11 - 8192008 89.73140 - INJECTED 11 - 8192009 100.22160 - INJECTED 11 - 8192010 131.49180 - INJECTED 11 - 8192011 149.14200 - INJECTED 11 - 8192012 203.10225 - INJECTED 11 - 8192013 241.84250 - INJECTED 11 - 8192014 419.24280 - INJECTED 11 - 8192015 632.47315 - INJECTED 11 - 8192016 767.8150 - INJECTED 17 - 8192017 12.5663 - INJECTED 17 - 8192018 22.7475 - INJECTED 17 - 8192019 30.8090 - INJECTED 17 - 8192020 34.18110 - INJECTED 17 - 8192021 55.80125 - INJECTED 17 - 8192022 81.03140 - INJECTED 17 - 8192023 99.33160 - INJECTED 17 - 8192024 118.28180 - INJECTED 17 - 8192025 133.03200 - INJECTED 17 - 8192026 181.84225 - INJECTED 17 - 8192027 217.61250 - INJECTED 17 - 8192028 360.66280 - INJECTED 17 - 8192029 544.27315 - INJECTED 17 - 8192030 677.30


QTY CODE PRICE

32 - INJECTED 11 - 8191001* 5.9240 - INJECTED 11 - 8191002* 13.0350 - INJECTED 11 - 8191003* 15.4063 - INJECTED 11 - 8191004 26.3675 - INJECTED 11 - 8191005 32.2890 - INJECTED 11 - 8191006 34.12110 - INJECTED 11 - 8191007 53.84125 - INJECTED 11 - 8191008 79.67140 - INJECTED 11 - 8191009 121.66160 - INJECTED 11 - 8191010 127.94180 - INJECTED 11 - 8191011 161.05200 - INJECTED 11 - 8191012 26.46225 - INJECTED 11 - 8191013 224.66250 - INJECTED 11 - 8191014 381.39280 - INJECTED 11 - 8191015 495.35315 - INJECTED 11 - 8191016 685.2450 - INJECTED 17 - 8191017* 14.8163 - INJECTED 17 - 8191018 22.9875 - INJECTED 17 - 8191019 29.8290 - INJECTED 17 - 8191020 30.74



90° BEND LONG SPIGOT CONT�

END CAP LONG SPIGOT



QTY CODE PRICE

20 - INJECTED 11 - 8196011 6.5225 - INJECTED 11 - 8196012 7.1732 - INJECTED 11 - 8139021 8.8840 - INJECTED 11 - 8139022 10.6050 - INJECTED 11 - 8139023 13.5063 - INJECTED 11 - 8139024 18.1275 - INJECTED 11 - 8139025 33.2990 - INJECTED 11 - 8139026 40.63110 - INJECTED 11 - 8139027 51.65125 - INJECTED 11 - 8139028 59.11140 - INJECTED 11 - 8139029 74.45160 - INJECTED 11 - 8139030 77.83180 - INJECTED 11 - 8139031 107.03200 - INJECTED 11 - 8139032 133.51225 - INJECTED 11 - 8139033 159.03250 - INJECTED 11 - 8196001* 183.26280 - INJECTED 11 - 8196002* 258.19315 - INJECTED 11 - 8196003* 353.61355 - INJECTED 11 - 8196004* 574.89400 - INJECTED 11 - 8196005* 1014.33450 - PUPPED 11 - 8100073* 1795.28500 - PUPPED 11 - 8100074* 2117.50560 - PUPPED 11 - 8100075* 2344.53630 - PUPPED 11 - 8100076* 3344.3550 - INJECTED 17 - 8139034 12.0263 - INJECTED 17 - 8139035 17.8975 - INJECTED 17 - 8139036 33.5290 - INJECTED 17 - 8139037 40.45110 - INJECTED 17 - 8139038 51.59125 - INJECTED 17 - 8139039 59.05140 - INJECTED 17 - 8139040 73.74160 - INJECTED 17 - 8139041 77.65180 - INJECTED 17 - 8139042 107.03200 - INJECTED 17 - 8139043 133.15225 - INJECTED 17 - 8139044 159.03250 - INJECTED 17 - 8196006* 183.26280 - INJECTED 17 - 8196007* 259.19315 - INJECTED 17 - 8196008* 353.61355 - INJECTED 17 - 8196009* 574.89400 - INJECTED 17 - 8196010* 1014.33450 - PUPPED 17 - 8100077* 1642.47500 - PUPPED 17 - 8100078* 1946.32560 - PUPPED 17 - 8100079* 2206.64630 - PUPPED 17 - 8100080* 2842.66



QTY CODE PRICE

110 - INJECTED 17 - 8191021 48.57125 - INJECTED 17 - 8191022 71.73140 - INJECTED 17 - 8191023 109.58160 - INJECTED 17 - 8191024 115.32180 - INJECTED 17 - 8191025 145.06200 - INJECTED 17 - 8191026 152.64225 - INJECTED 17 - 8191027 202.39250 - INJECTED 17 - 8191028 343.18280 - INJECTED 17 - 8191029 445.53315 - INJECTED 17 - 8191030 616.47

For sweep bends DN 110 - 1000 see page 127

122

11° SEAMLESS BEND


SIZE 1 ANGLEO SDR CODE PRICE

110 11 7.4 8100001* 233.49160 11 7.4 8100002* 343.78225 11 7.4 8100003* 830.47315 11 7.4 8100004* 1395.7132 11 11 8101001* 51.5340 11 11 8101002* 56.0950 11 11 8101003* 77.2463 11 11 8101004* 187.8675 11 11 8101005* 118.3490 11 11 8101006 131.08110 11 11 8101531 169.52125 11 11 8101532 188.83140 11 11 8101533* 212.34160 11 11 8101534 249.30180 11 11 8101535 417.04200 11 11 8101536 504.94225 11 11 8101007* 602.50250 11 11 8101008 702.36280 11 11 8101009* 835.09315 11 11 8101010 1012.79355 11 11 8101011 1852.44400 11 11 8101012* 2037.36450 11 11 8101013* 2503.68500 11 11 8101014* 3506.40560 11 11 8101015* 4521.38630 11 11 8101016* 5810.36710 11 11 8101537 17176.92800 11 11 8101538 21619.2350 11 17 8101017* 64.0963 11 17 8101018* 93.7675 11 17 8101019* 99.8090 11 17 8101020* 107.68110 11 17 8101021 134.45125 11 17 8101022* 152.22140 11 17 8101023* 173.37160 11 17 8101024 191.49180 11 17 8101025* 305.93200 11 17 8101026* 369.72225 11 17 8101027* 438.31250 11 17 8101028* 529.64280 11 17 8101029* 585.97315 11 17 8101030* 756.08355 11 17 8101031* 1194.03400 11 17 8101032* 1657.28450 11 17 8101033* 1991.93500 11 17 8101034* 2731.49560 11 17 8101035* 3490.23630 11 17 8101036* 4353.58710 11 17 8101539 11846.15800 11 17 8101540 13326.92900 11 17 8100005* 18953.85

1000 11 17 8100006* 21619.23*Available on request

r ~ 1.5 x d

Seamless bends may incur additional freight charges


22° SEAMLESS BEND



110 22 7.4 8100007* 233.49160 22 7.4 8100008* 343.78225 22 7.4 8100009* 830.47315 22 7.4 8100010* 1398.7132 22 11 8101037* 51.5340 22 11 8101038* 56.0952 22 11 8101039* 77.2463 22 11 8101040* 107.8675 22 11 8101041* 118.3490 22 11 8101042* 131.08110 22 11 8101043* 169.52125 22 11 8101044 188.83140 22 11 8101045* 212.34160 22 11 8101046* 249.30180 22 11 8101047 417.04200 22 11 8101048 504.94225 22 11 8101049* 602.50250 22 11 8101050 702.36280 22 11 8101051* 835.09315 22 11 8101052 1012.79355 22 11 8101053 1852.44400 22 11 8101054* 2037.36450 22 11 8101055* 2503.68500 22 11 8101056* 3506.40560 22 11 8101057* 4521.38630 22 11 8101058* 5810.36710 22 11 8100011* 17176.92800 22 11 8100012* 21619.2350 22 17 8101059* 64.0963 22 17 8101060* 93.7675 22 17 8101061* 99.8090 22 17 8101062* 107.68110 22 17 8101063* 134.45125 22 17 8101064* 152.22140 22 17 8101065* 173.37160 22 17 8101066* 191.49180 22 17 8101067* 305.93200 22 17 8101068* 369.72225 22 17 8101069* 438.31250 22 17 8101070* 529.64280 22 17 8101071* 585.97315 22 17 8101072* 756.08355 22 17 8101073* 1194.03400 22 17 8101074* 1657.28450 22 17 8101075* 1991.93500 22 17 8101076* 2731.49560 22 17 8101077* 3490.23630 22 17 8101078* 4353.58710 22 17 8100013* 11846.15800 22 17 8100014* 13326.92900 22 17 8100015* 18953.85


r ~ 1.5 x d


124

30° SEAMLESS BEND



110 30 7.4 8100021* 233.49160 30 7.4 8100022* 343.78225 30 7.4 8100023* 830.47315 30 7.4 8100024* 1395.7132 30 11 8101138* 51.5340 30 11 8101139* 56.0950 30 11 8101140* 77.2463 30 11 8101141* 107.8675 30 11 8101142* 118.3490 30 11 8101143 131.08110 30 11 8101144 169.52125 30 11 8101145* 188.83140 30 11 8101146* 212.34160 30 11 8101147 249.30180 30 11 8101148* 417.04200 30 11 8101149 504.14225 30 11 8101150* 602.50250 30 11 8101151* 702.36280 30 11 8101152* 835.09315 30 11 8101153* 1012.79355 30 11 8101154* 1852.44400 30 11 8101155* 2037.36450 30 11 8101156* 2503.68500 30 11 8101157* 3506.40560 30 11 8101158* 4521.38630 30 11 8101159* 5810.36710 30 11 8100025* 17176.92800 30 11 8100026* 21619.2350 30 17 8101160* 64.0963 30 17 8101161* 93.7675 30 17 8101162* 99.8090 30 17 8101163* 107.68110 30 17 8101164 134.45125 30 17 8101165* 152.22140 30 17 8101166* 173.37160 30 17 8101167 191.49180 30 17 8101168* 305.93200 30 17 8101169* 369.72225 30 17 8101170* 438.31250 30 17 8101171* 529.64280 30 17 8101172* 585.97315 30 17 8101173* 756.08355 30 17 8101174* 1194.03400 30 17 8101175* 1657.28450 30 17 8101176* 1991.93500 30 17 8101177* 2731.49560 30 17 8101178* 3490.23630 30 17 8101179* 4353.58710 30 17 8100027* 11846.15800 30 17 8100028* 13326.92900 30 17 8100029* 18953.85


r ~ 1.5 x d



45° SEAMLESS BEND



110 45 7.4 8100035* 236.86160 45 7.4 8100036* 353.02225 45 7.4 8100037* 844.04315 45 7.4 8100038* 1462.0532 45 11 8101239* 51.5340 45 11 8101240* 56.1550 45 11 8101241* 77.6563 45 11 8101242* 108.1672 45 11 8101243* 119.0590 45 11 8101244 132.38110 45 11 8101245 171.77125 45 11 8101246 192.20140 45 11 8101247* 217.32160 45 11 8101248 256.05180 45 11 8101249 424.63200 45 11 8101250 513.47225 45 11 8101251 612.33250 45 11 8101252 727.47280 45 11 8101253 870.10315 45 11 8101254 1060.94355 45 11 8101255 1852.44400 45 11 8101256 2037.36450 45 11 8101257 2503.68500 45 11 8101258 3506.40560 45 11 8101259 4521.38630 45 11 8101260 5810.36710 45 11 8100039 17176.92800 45 11 8100040 21619.2350 45 17 8101261* 64.3263 45 17 8101262* 94.3075 45 17 8101263* 100.0490 45 17 8101264 108.04110 45 17 8101265 136.05125 45 17 8101266* 154.41140 45 17 8101267* 176.45160 45 17 8101268 195.76180 45 17 8101269 311.14200 45 17 8101270 374.58225 45 17 8101271 444.41250 45 17 8101272 547.41280 45 17 8101273* 608.36315 45 17 8101274 786.76355 45 17 8101275 1194.03400 45 17 8101276 1657.28450 45 17 8101277* 1993.53500 45 17 8101278 2791.49560 45 17 8101279 3490.23630 45 17 8101280 4353.58710 45 17 8100041 11846.15800 45 17 8100042 13326.92900 45 17 8100043* 18953.85


r ~ 1.5 x d


126

60° SEAMLESS BEND




110 60 7.4 8100049* 240.24160 60 7.4 8100050* 363.74225 60 7.4 8100051* 861.63315 60 7.4 8100052* 1534.3132 60 11 8101340* 51.7140 60 11 8101341* 56.3350 60 11 8101342* 77.8363 60 11 8101343* 109.0475 60 11 8101344* 119.9490 60 11 8101345 133.80110 60 11 8101346 174.26125 60 11 8101347* 196.88140 60 11 8101348* 222.83160 60 11 8101349 263.87180 60 11 8101350* 434.99200 60 11 8101351 526.86225 60 11 8101352* 625.12250 60 11 8101353* 753.06280 60 11 8101354* 904.63315 60 11 8101355* 1113.06355 60 11 8101356* 1890.65400 60 11 8101357* 2085.87450 60 11 8101358* 2564.63500 60 11 8101359* 3857.29560 60 11 8101360* 5973.43630 60 11 8101361* 6391.53710 60 11 8100053* 18953.85800 60 11 8100054* 22803.8550 60 17 8101362* 64.4463 60 17 8101363* 94.5375 60 17 8101364* 100.7590 60 17 8101365* 109.22110 60 17 8101366 137.89125 60 17 8101367* 157.44140 60 17 8101368* 179.77160 60 17 8101369 200.61180 60 17 8101370* 318.07200 60 17 8101371* 383.22225 60 17 8101372* 451.87250 60 17 8101373* 565.06280 60 17 8101374* 630.99315 60 17 8101375* 820.23355 60 17 8101376* 1205.46400 60 17 8101377* 1720.71450 60 17 8101378* 2093.57500 60 17 8101379* 3004.60560 60 17 8101380* 3839.34630 60 17 8101381* 4788.81710 60 17 8100055* 13623.08800 60 17 8100056* 15696.15900 60 17 8100057* 19546.15

1000 60 17 8100058* 23988.46

r ~ 1.5 x d



90° SEAMLESS BEND



110 90 7.4 8100063* 243.26160 90 7.4 8100064* 383.93225 90 7.4 8100065* 912.27315 90 7.4 8100066* 1666.7532 90 11 8101489* 51.8340 90 11 8101490* 56.6850 90 11 8101491* 78.1863 90 11 8101492* 109.2875 90 11 8101493 121.5490 90 11 8101494 136.11110 90 11 8101495 176.45125 90 11 8101496 202.39140 90 11 8101497* 232.72160 90 11 8101498 278.38180 90 11 8101499 459.51200 90 11 8101500 557.72225 90 11 8101501 661.90250 90 11 8101502 800.98280 90 11 8101503 974.46315 90 11 8101504 1209.37355 90 11 8101505 1741.38400 90 11 8101506 1996.49450 90 11 8101507 2821.04500 90 11 8101508 4242.76560 90 11 8101509 4570.61630 90 11 8101510 7030.51710 90 11 8100067 20434.62800 90 11 8100068 24580.7750 90 17 8101511* 64.5063 90 17 8101512* 95.0775 90 17 8101513* 101.7690 90 17 8101514 111.06110 90 17 8101515 139.07125 90 17 8101516* 160.99140 90 17 8101517* 185.81160 90 17 8101518 209.80180 90 17 8101519 334.71200 90 17 8101520 402.41225 90 17 8101521 474.62250 90 17 8101522 598.76280 90 17 8101523 675.17315 90 17 8101524 881.65355 90 17 8101525 1157.43400 90 17 8101526 1626.89450 90 17 8101527 2302.83500 90 17 8101528 3305.08560 90 17 8101529 4223.39630 90 17 8101530 5267.63710 90 17 8100069 14215.38800 90 17 8100070 16288.46900 90 17 8100071* 21026.92

1000 90 17 8100072* 25765.38*Available on requestSeamless bends may incur additional freight charges

128

STUB FLANGE FOR ANSI, SHORT SPIGOT

STUB FLANGE FOR ISO/DIN/AS, SHORT SPIGOT

FITTINGS FOR BUTTWELD

SIZE 1 THICKNESS(TS)


QTY CODE PRICE

20 7 INJECTED 11 - 8106001* 7.2325 9 INJECTED 11 - 8106002 7.5232 10 INJECTED 11 - 8106003* 8.2340 11 INJECTED 11 - 8106004* 9.7150 12 INJECTED 11 - 8106005 11.4963 14 INJECTED 11 - 8106006* 13.8675 16 INJECTED 11 - 8106007* 16.4190 17 INJECTED 11 - 8106008 23.04



QTY CODE PRICE

20 7 INJECTED 11 - 8106009 5.9825 9 INJECTED 11 - 8106010 6.2932 10 INJECTED 11 - 8106011 6.8740 11 INJECTED 11 - 8106012 8.0650 12 INJECTED 11 - 8106013 9.6063 14 INJECTED 11 - 8106014 11.5575 16 INJECTED 11 - 8106015 13.6890 17 INJECTED 11 - 8106016 19.25110 18 INJECTED 11 - 8106017 23.69125 25 INJECTED 11 - 8106018 28.55140 25 INJECTED 11 - 8106019 33.29160 25 INJECTED 11 - 8106020 42.17180 30 INJECTED 11 - 8106021 64.62200 32 INJECTED 11 - 8106022 70.78225 32 INJECTED 11 - 8106023 79.13250 35 INJECTED 11 - 8106024 120.00280 35 INJECTED 11 - 8106025 130.84315 35 INJECTED 11 - 8106026 154.06355 40 INJECTED 11 - 8106027 273.71400 46 INJECTED 11 - 8106028 564.47450 60 INJECTED 11 - 8106029 655.68500 60 INJECTED 11 - 8106030 837.29560 60 MACHINED 11 - 8100501 1330.62630 60 MACHINED 11 - 8100502 1085.4050 12 INJECTED 17 - 8106031 8.6563 14 INJECTED 17 - 8106032 10.5475 16 INJECTED 17 - 8106033 12.6290 17 INJECTED 17 - 8106034 17.18110 18 INJECTED 17 - 8106035 22.03125 18 INJECTED 17 - 8106036 26.71140 18 INJECTED 17 - 8106037 30.80160 18 INJECTED 17 - 8106038 37.85180 20 INJECTED 17 - 8106039 54.97200 24 INJECTED 17 - 8106040 68.23225 24 INJECTED 17 - 8106041 77.24250 25 INJECTED 17 - 8106042 109.10



TS


STUB FLANGE FOR ISO/DIN/AS, SHORT SPIGOT CONT�

STUB FLANGE FOR ISO/DIN/AS, WITH CHAMFER, SHORT SPIGOT




QTY CODE PRICE

280 25 INJECTED 17 - 8106043 120.77315 25 INJECTED 17 - 8106044 146.24355 30 INJECTED 17 - 8106045 249.95400 33 INJECTED 17 - 8106046 524.61450 46 INJECTED 17 - 8106047 619.14500 46 INJECTED 17 - 8106048 764.85560 50 INJECTED 17 - 8106049 782.68630 50 INJECTED 17 - 8106050 932.35710 50 MACHINED 17 - 8100503 1371.96800 52 MACHINED 17 - 8100504 1691.04900 55 MACHINED 17 - 8100505* 2462.22

1000 60 MACHINED 17 - 8100506* 3614.441100 70 MACHINED 17 - 8100507* POA1200 - MACHINED 17 - 8100508* POA110 18 INJECTED 33 - 8106051 22.03125 18 INJECTED 33 - 8106052 26.59140 18 INJECTED 33 - 8106053 30.74160 18 INJECTED 33 - 8106054 37.85180 18 INJECTED 33 - 8106055 54.97200 18 INJECTED 33 - 8106056 65.75225 18 INJECTED 33 - 8106057 73.80250 20 INJECTED 33 - 8106058 103.77280 20 INJECTED 33 - 8106059 111.59315 20 INJECTED 33 - 8106060 135.34355 23 INJECTED 33 - 8106061 227.92400 26 INJECTED 33 - 8106062 491.56450 33 INJECTED 33 - 8106063 577.38500 38 INJECTED 33 - 8106064 703.13560 40 INJECTED 33 - 8106065 732.15630 40 INJECTED 33 - 8106066 839.89710 35 MACHINED 33 - 8100509* 1310.36800 36 MACHINED 33 - 8100510* 1567.84900 40 MACHINED 33 - 8100511* 2292.23

1000 42 MACHINED 33 - 8100512* 2877.431100 50 MACHINED 33 - 8100513* POA1200 50 MACHINED 33 - 8100514* POA



QTY CODE PRICE

110 18 INJECTED 11 - 8100487 29.62125 25 INJECTED 11 - 8100488 35.72140 25 INJECTED 11 - 8100489 41.64160 25 INJECTED 11 - 8100490 52.72180 30 INJECTED 11 - 8100491 80.79200 32 INJECTED 11 - 8100492 88.49225 32 INJECTED 11 - 8100493 97.92250 35 INJECTED 11 - 8100494 150.03280 35 INJECTED 11 - 8100495 163.60315 35 INJECTED 11 - 8100496 192.62355 40 INJECTED 11 - 8100497 342.12400 46 INJECTED 11 - 8100498 705.62450 60 INJECTED 11 - 8100499 819.64500 60 INJECTED 11 - 8100500 1046.61


TS

TS

130

CONCENTRIC REDUCER SHORT SPIGOT



QTY CODE PRICE

25 20 INJECTED 11 - 8149001* 6.9332 20 INJECTED 11 - 8149002 8.2932 25 INJECTED 11 - 8149003* 8.2940 20 INJECTED 11 - 8149004* 9.5440 25 INJECTED 11 - 8149005* 9.5440 32 INJECTED 11 - 8149006 9.5450 25 INJECTED 11 - 8149007 9.9550 32 INJECTED 11 - 8149008 9.9550 40 INJECTED 11 - 8149009 9.9563 32 INJECTED 11 - 8149010 11.5563 40 INJECTED 11 - 8149011 11.5563 50 INJECTED 11 - 8149012 11.5575 32 INJECTED 11 - 8149013* 14.9375 40 INJECTED 11 - 8149014* 14.9375 50 INJECTED 11 - 8149015* 14.9375 63 INJECTED 11 - 8149016* 14.9390 50 INJECTED 11 - 8149017 16.1790 63 INJECTED 11 - 8149018 16.1790 75 INJECTED 11 - 8149019 16.17110 50 INJECTED 11 - 8149020 19.96110 63 INJECTED 11 - 8149021 19.96110 75 INJECTED 11 - 8149022 19.96110 90 INJECTED 11 - 8149023 19.96125 63 INJECTED 11 - 8149024 25.77125 75 INJECTED 11 - 8149025* 25.77125 90 INJECTED 11 - 8149026 25.77125 110 INJECTED 11 - 8149027 25.77140 75 INJECTED 11 - 8149028* 31.33140 90 INJECTED 11 - 8149029* 31.33140 110 INJECTED 11 - 8149030* 31.33140 125 INJECTED 11 - 8149031* 31.33160 90 INJECTED 11 - 8149032 36.37160 110 INJECTED 11 - 8149033 36.37160 125 INJECTED 11 - 8149034 36.37160 140 INJECTED 11 - 8149035 36.37180 90 INJECTED 11 - 8149036 54.61180 110 INJECTED 11 - 8149037 54.61180 125 INJECTED 11 - 8149038 51.77180 140 INJECTED 11 - 8149039* 49.75180 160 INJECTED 11 - 8149040 49.75200 140 INJECTED 11 - 8149041 159.32200 160 INJECTED 11 - 8149042 122.96200 180 INJECTED 11 - 8149043* 109.58225 140 INJECTED 11 - 8149044* 183.62225 160 INJECTED 11 - 8149045 157.32225 180 INJECTED 11 - 8149046 150.03225 200 INJECTED 11 - 8149047 132.56250 160 INJECTED 11 - 8149048 210.45250 180 INJECTED 11 - 8149049 194.69250 200 INJECTED 11 - 8149050 178.94250 225 INJECTED 11 - 8149051 170.05280 200 INJECTED 11 - 8149052 233.90280 225 INJECTED 11 - 8149053 218.98280 250 INJECTED 11 - 8149054 210.09315 200 INJECTED 11 - 8149055 298.88315 225 INJECTED 11 - 8149056 254.16315 280 INJECTED 11 - 8149057 225.49315 250 INJECTED 11 - 8149058 240.77



CONCENTRIC REDUCER SHORT SPIGOT CONT�




QTY CODE PRICE

355 225 MACHINED 11 - 8100081 559.14355 250 MACHINED 11 - 8100082 563.46355 280 MACHINED 11 - 8100083 525.26355 315 MACHINED 11 - 8100084 509.86400 225 MACHINED 11 - 8100085 961.61400 250 MACHINED 11 - 8100086 926.84400 280 MACHINED 11 - 8100087 733.16400 315 MACHINED 11 - 8100088 546.70400 355 MACHINED 11 - 8100089 508.50450 280 MACHINED 11 - 8100090 1159.03450 315 MACHINED 11 - 8100091 1014.92450 355 MACHINED 11 - 8100092 726.94450 400 MACHINED 11 - 8100093 658.23500 315 MACHINED 11 - 8100094 1418.75500 355 MACHINED 11 - 8100095 1277.90500 400 MACHINED 11 - 8100096 1037.43500 450 MACHINED 11 - 8100097 916.00560 400 MACHINED 11 - 8100098 1830.23560 450 MACHINED 11 - 8100099 1636.43560 500 MACHINED 11 - 8100100 1516.90630 400 MACHINED 11 - 8100101 2492.13630 450 MACHINED 11 - 8100102 2322.73630 500 MACHINED 11 - 8100103 2097.24630 560 MACHINED 11 - 8100104 1632.7063 32 INJECTED 17 - 8149059 11.5563 50 INJECTED 17 - 8149060 11.5575 50 INJECTED 17 - 8149061* 14.9375 63 INJECTED 17 - 8149062* 14.9390 50 INJECTED 17 - 8149063 16.1790 63 INJECTED 17 - 8149064 16.1790 75 INJECTED 17 - 8149065 16.17110 50 INJECTED 17 - 8149066 19.96110 63 INJECTED 17 - 8149067 19.96110 75 INJECTED 17 - 8149068 19.96110 90 INJECTED 17 - 8149069 19.96125 63 INJECTED 17 - 8149070 25.77125 75 INJECTED 17 - 8149071 25.77125 90 INJECTED 17 - 8149072 25.77125 110 INJECTED 17 - 8149073 25.77140 75 INJECTED 17 - 8149074* 31.33140 90 INJECTED 17 - 8149075* 31.33140 110 INJECTED 17 - 8149076 31.33140 125 INJECTED 17 - 8149077* 31.33160 90 INJECTED 17 - 8149078 36.37160 110 INJECTED 17 - 8149079 36.37160 125 INJECTED 17 - 8149080 36.37160 140 INJECTED 17 - 8149081 36.37180 90 INJECTED 17 - 8149082 54.61180 110 INJECTED 17 - 8149083 51.77180 125 INJECTED 17 - 8149084 54.61180 140 INJECTED 17 - 8149085 49.75180 160 INJECTED 17 - 8149086 49.75

132

CONCENTRIC REDUCER SHORT SPIGOT CONT�



QTY CODE PRICE

200 140 INJECTED 17 - 8149087 158.32200 160 INJECTED 17 - 8149088 122.96200 180 INJECTED 17 - 8149089* 109.58225 140 INJECTED 17 - 8149090 179.53225 160 INJECTED 17 - 8149091 154.12225 180 INJECTED 17 - 8149092 129.12225 200 INJECTED 17 - 8149093 204.64250 160 INJECTED 17 - 8149094 189.83250 180 INJECTED 17 - 8149095 146.36250 200 INJECTED 17 - 8149096 174.49250 225 INJECTED 17 - 8149097 166.02280 200 INJECTED 17 - 8149098 227.98280 225 INJECTED 17 - 8149099 213.23280 250 INJECTED 17 - 8149100 204.64315 200 INJECTED 17 - 8149101 291.53315 225 INJECTED 17 - 8149102 247.35315 250 INJECTED 17 - 8149103 234.55315 280 INJECTED 17 - 8149104 219.92355 225 MACHINED 17 - 8100105 559.14355 250 MACHINED 17 - 8100106 563.46355 280 MACHINED 17 - 8100107 525.26355 315 MACHINED 17 - 8100108 509.86400 225 MACHINED 17 - 8100109 961.61400 250 MACHINED 17 - 8100110 926.84400 280 MACHINED 17 - 8100111 733.16400 315 MACHINED 17 - 8100112 546.70400 355 MACHINED 17 - 8100113 508.50450 280 MACHINED 17 - 8100114 1159.03450 315 MACHINED 17 - 8100115 1014.92450 355 MACHINED 17 - 8100116 726.94450 400 MACHINED 17 - 8100117 658.23500 315 MACHINED 17 - 8100118 1418.75500 355 MACHINED 17 - 8100119 1277.90500 400 MACHINED 17 - 8100120 1037.43500 450 MACHINED 17 - 8100121 916.00560 400 MACHINED 17 - 8100122 1830.23560 450 MACHINED 17 - 8100123 1636.43560 500 MACHINED 17 - 8100124 1258.54630 400 MACHINED 17 - 8100125 2492.13630 450 MACHINED 17 - 8100126 2322.73630 500 MACHINED 17 - 8100127 1760.64630 560 MACHINED 17 - 8100128 1632.70710 500 MACHINED 17 - 8100129 4129.45710 560 MACHINED 17 - 8100130 3755.23710 630 MACHINED 17 - 8100131 1935.54800 560 MACHINED 17 - 8100132 5128.97800 630 MACHINED 17 - 8100133 3419.87800 710 MACHINED 17 - 8100134 3056.01900 630 MACHINED 17 - 8100135 5244.47900 710 MACHINED 17 - 8100136 4499.47900 800 MACHINED 17 - 8100137 3130.941000 710 MACHINED 17 - 8100138 4255.431000 800 MACHINED 17 - 8100139 8370.491000 900 MACHINED 17 - 8100140 5926.93

133

BENDS 90D: SDR 11 – 33, 20 – 400MM

ECCENTRIC REDUCER SDR 11 – 33, 90 – 1000MM

SPECIAL FLANGES

Steel flanges with a Polypropylene coating are an alternative to Galvanised or Stainless Steel flanges. The Polypropylene coating is a uniform thickness due to the injection molding process and has a high resistance to mechanical impact.

The special dimensions ensure no internal misalignment which avoids turbulence, sedimentation and dead spaces. It also allows the use of butterfly valves without chamfered stub ends.

Due to the matched inside diameters smaller valves can often be used leading to significant cost savings for the overall installation.

Contact Plasson for further information on how this product can save you money!

Flange connection with offset of inner pipe wall (red marking) and DN 250 valve

Special flange connection with no offset of inner pipe wall (red marking) and small DN 200 valve

The following fittings are available on request for project work

SHORT SPIGOT

END CAPSDR 11 – 17, 250 – 800MM

TEE (EQUAL+REDUCING)SDR 11 - 33, 20-500MM

Plasson Australia Pty LtdWholesale prices do not include 10% GST

GALVANISED 316 SS

PE SIZE

FLANGE SIZE OD TCK

TFPCD #

HOLESø

HOLEBOLT TYPE FLANGE PRICE BOLT SET -

LENGTH (mm) PRICE FLANGE PRICE BOLT SETLENGTH (mm) PRICE GASKET PRICE

125 DN125 (5") 255 13 210 8 18 M16 8900011 35.908920011-0658920011-0808920011-100

30.8741.7141.59

8910011 144.648930011-0658930011-0808930011-100

70.4498.1986.47

8940010 27.75

140 DN125 (5") 255 13 210 8 18 M16 8900012 30.568920012-0658920012-0808920012-100

30.8741.7141.59

8910012 122.938930012-0658930011-0808930011-100

70.4498.1986.47

8940010 27.75

160 DN150 (6") 280 13 235 8 18 M16 8900013 35.658920013-0658920013-0808920013-100

30.8741.7141.59

8910013 143.798930013-0658930011-0808930011-100

70.4498.1986.47

8940011 31.75

180 DN150 (6") 280 13 235 8 18 M16 8900014 32.958920014-0658920014-0808920014-100

30.8741.7141.59

8910014 132.588930014-0658930011-0808930011-100

70.4498.1986.47

8940011 31.75

200 DN200 (8") 335 13 292 8 18 M16 8900015 43.908920015-0658920015-0808920015-100

30.8741.7141.59

8910015 176.858930015-0658930011-0808930011-100

70.4498.1986.47

8940012 36.25

225 DN200 (8") 335 13 292 8 18 M16 8900016 42.958920016-0658920016-0808920016-100

30.8741.7141.59

8910016 172.808930016-0658930011-0808930011-100

70.4498.1986.47

8940012 36.25

250 DN250 (10") 405 16 356 8 22 M20 8900017 70.058920017-1108920017-1208920017-130

68.9068.6175.55

8910017 311.048930017-1108930017-1208930017-130

176.06173.40254.90

8940013 48.25

280 DN250 (10") 405 16 356 8 22 M20 8900018 66.658920018-1108920018-1208920018-130

68.9068.6175.55

8910018 296.118930018-1108930018-1208930018-130

176.06173.40254.90

8940013 48.25

315 DN300 (12") 455 19 406 12 22 M20 8900019 93.708920019-1108920019-1208920019-130

103.34102.91113.32

8910019 416.168930019-1108930019-1208930019-130

264.10260.10382.35

8940014 57.75

355 DN350 (14") 525 22 470 12 26 M24 8900020 156.708920020-1508920020-2008920020-240

213.91245.52300.93

8910020 696.118930020-1608930020-2008930020-250

432.03587.86697.58

8940015 113.75

Note: All dimensions in mm unless otherwise noted.

BACKING FLANGES - AS2129 TABLE D

Gasket Material: EPDMTG: 3mmGalvanised bolts are not recommended for use with stainless steel flanges due to potential galvanic corrosion issues.


135

GALVANISED 316 SS

PE SIZE

FLANGE SIZE OD TCK

TFPCD #

HOLESø

HOLEBOLTTYPE FLANGE PRICE BOLT SET -


20 DN 15 (1/2") 95 5 67 4 14 M12 8900001

REFER TABLE EPAGE 29

8920001-0408920001-0508920001-060

9.249.8611.61

8910001

REFER TABLE EPAGE 29

8930001-0408930001-0508930001-060

19.4019.7924.01

8940001 7.50

25 DN 20 (3/4") 100 5 73 4 14 M12 89000028920002-0408920002-0508920002-060

9.249.8611.61

89100028930002-0408930002-0508930002-060

19.4019.7924.01

8940002 8.00

32 DN25 (1") 115 5 83 4 14 M12 89000038920003-0408920003-0508920003-060

9.249.8611.61

89100038930003-0408930003-0508930003-060

19.4019.7924.01

8940003 4.75

40 DN32 (1-1/4") 120 6 87 4 14 M12 89000048920004-0408920004-0508920004-060

9.249.8611.61

89100048930004-0408930004-0508930004-060

19.4019.7924.01

8940004 4.75

50 DN40 (1-1/2") 135 6 98 4 14 M12 8900005 6.108920005-0408920005-0508920005-060

9.249.8611.61

8910005 20.598930005-0408930005-0508930005-060

19.4019.7924.01

8940005 9.75

63 DN50 (2") 150 8 114 4 18 M16 8900006 9.108920006-0658920006-0808920006-100

15.4420.8520.79

8910006 30.678930006-0658930006-0808930006-100

35.2349.1043.23

8940006 10.75

75 DN65 (2-1/2") 165 8 127 4 18 M16 8900007 10.408920007-0658920007-0808920007-100

15.4420.8520.79

8910007 35.048930007-0658930007-0808930007-100

35.2349.1043.23

8940007 12.60

90 DN80 (3") 185 10 146 4 18 M16 8900008 15.708920008-0658920008-0808920008-100

15.4420.8520.79

8910008 53.178930008-0658930008-0808930008-100

35.2349.1043.23

8940008 12.15

110 DN100 (4") 215 10 178 4 18 M16 8900009 18.908920009-0658920009-0808920009-100

15.4420.8520.79

8910009 71.748930009-0658930009-0808930009-100

35.2349.1043.23

8940009 16.15

125 DN100 (4") 215 10 178 4 18 M16 8900010 17.808920010-0658920010-0808920010-100

15.4420.8520.79

8910010 67.258930010-0658930010-0808930010-100

35.2349.1043.23

8940009 16.15


Note: All dimensions in mm unless otherwise noted. Gasket Material: EPDMTG: 3mmGalvanised bolts are not recommended for use with stainless steel flanges due to potential galvanic corrosion issues.


GALVANISED 316 SS

PE SIZE

FLANGE SIZE OD TCK

TFPCD #

HOLESø



400 DN400 (16") 580 22 521 12 26 M24 8900021 178.758920021-1508920021-2008920021-240

213.91245.52300.93

8910021 794.148930021-1608930021-2008930021-250

432.03587.86697.58

8940016 135.00

450 DN450 (18") 640 25 584 12 26 M24 8900022 189.558920022-1508920022-2008920022-240

213.91245.52300.93

8910022 842.038930022-1608930022-2008930022-250

432.03587.86697.58

8940017 113.51

500 DN500 (20") 705 29 641 16 26 M24 8900023 331.918920023-1508920023-2008920023-240

285.21327.36401.24

8910023 1474.408930023-1608930023-2008930023-250

576.04783.81930.11

8940018 127.50

560 DN550 (22") 760 29 699 16 30 M27 8900024 296.90 8920024 POA 8910024 1318.94 8930024 POA 8940019 192.80630 DN600 (24") 825 32 756 16 30 M27 8900025 452.15 8920025 POA 8910025 2009.07 8930025 POA 8940020 162.50710 DN700 (28") 910 35 845 20 30 M27 8900026 POA 8920026 POA 8910026 POA 8930026 POA 8940021 POA800 DN800 (32") 1060 41 984 20 36 M33 8900027 POA 8920027 POA 8910027 POA 8930027 POA 8940022 POA900 DN900 (36") 1175 48 1092 24 36 M33 8900028 POA 8920028 POA 8910028 POA 8930028 POA 8940023 POA

1000 DN1000 (40") 1255 51 1175 24 36 M33 8900029 POA 8920029 POA 8910029 POA 8930029 POA 8940024 POA1200 DN1200 (48") 1490 60 1410 32 36 M33 8900030 POA 8920030 POA 8910030 POA 8930030 POA 8940025 POA



Gasket Material: EPDMTG: 3mmGalvanised bolts are not recommended for use with stainless steel flanges due to potential galvanic corrosion issues.


137

GALVANISED 316 SS

PE SIZE

FLANGE SIZE OD TCK

TFPCD #

HOLESø



20 DN 15 (1/2") 95 6 67 4 14 M12 8900031 3.408920031-0408920031-0508920031-060

9.249.8611.61

8910031 11.318930031-0408930031-0508930031-060

19.4019.7924.01

8940001 7.50

25 DN 20 (3/4") 100 6 73 4 14 M12 8900032 3.658920032-0408920032-0508920032-060

9.249.8611.61

8910032 12.168930032-0408930032-0508930032-060

19.4019.7924.01

8940002 8.00

32 DN25 (1") 115 7 83 4 14 M12 8900033 5.658920033-0408920033-0508920033-060

9.249.8611.61

8910033 18.988930033-0408930033-0508930033-060

19.4019.7924.01

8940003 4.75

40 DN32 (1-1/4") 120 8 87 4 14 M12 8900034 6.608920034-0408920034-0508920034-060

9.249.8611.61

8910034 22.248930034-0408930034-0508930034-060

19.4019.7924.01

8940004 4.75

50 DN40 (1-1/2") 135 9 98 4 14 M12 8900035 9.158920035-0408920035-0508920035-060

9.249.8611.61

8910035 31.048930035-0408930035-0508930035-060

19.4019.7924.01

8940005 9.75

63 DN50 (2") 150 10 114 4 18 M16 8900036 11.358920036-0658920036-0808920036-100

15.4420.8520.79

8910036 41.928930036-0658930036-0808930036-100

35.2349.1043.23

8940006 10.75

75 DN65 (2-1/2") 165 10 127 4 18 M16 8900037 13.008920037-0658920037-0808920037-100

15.4420.8520.79

8910037 48.378930037-0658930037-0808930037-100

35.2349.1043.23

8940007 12.60

90 DN80 (3") 185 11 146 4 18 M16 8900038 14.158920038-0658920038-0808920038-100

15.4420.8520.79

8910038 58.838930038-0658930038-0808930038-100

35.2349.1043.23

8940008 12.15

110 DN100 (4") 215 13 178 8 18 M16 8900039 21.408920039-0658920039-0808920039-100

30.8741.7141.59

8910039 89.128930039-0658930039-0808930039-100

70.4498.1986.47

8940026 26.36

125 DN100 (4") 215 13 178 8 18 M16 8900040 20.108920040-0658920040-0808920040-100

30.8741.7141.59

8910040 83.418930040-0658930040-0808930040-100

70.4498.1986.47

8940026 26.36

BACKING FLANGES - TABLE E - AS2129



GALVANISED 316 SS

PE SIZE

FLANGE SIZE OD TCK

TFPCD #

HOLESø



125 DN125 (5") 255 14 210 8 18 M16 8900041 37.608920041-0658920041-0808920041-100

30.8741.7141.59

8910041 155.958930041-0658930041-0808930041-100

70.4498.1986.47

8940010 27.75

140 DN125 (5") 255 14 210 8 18 M16 8900042 31.808920042-065 8920042-0808920042-100

30.8741.7141.59

8910042 132.228930042-065 8930042-0808930042-100

70.4498.1986.47

8940010 27.75

160 DN150 (6") 280 17 235 8 22 M20 8900043 44.058920043-1108920043-1208920043-130

68.9068.6175.55

8910043 182.888930043-1108930043-1208930043-130

176.06173.40254.90

8940011 31.75

180 DN150 (6") 280 17 235 8 22 M20 8900044 40.408920044-1108920044-1208920044-130

68.9068.6175.55

8910044 168.008930044-1108930044-1208930044-130

176.06173.40254.90

8940011 31.75

200 DN200 (8") 335 19 292 8 22 M20 8900045 60.658920045-1108920045-1208920045-130

68.9068.6175.55

8910045 252.218930045-1108930045-1208930045-130

176.06173.40254.90

8940012 36.25

225 DN200 (8") 335 19 292 8 22 M20 8900046 59.408920046-1108920046-1208920046-130

68.9068.6175.55

8910046 246.518930046-1108930046-1208930046-130

176.06173.40254.90

8940012 36.25

250 DN250 (10") 405 22 356 12 22 M20 8900047 90.658920047-1108920047-1208920047-130

103.34102.91113.32

8910047 387.208930047-1108930047-1208930047-130

264.10260.10382.35

8940027 64.75

280 DN250 (10") 405 22 356 12 22 M20 8900048 86.158920048-1108920048-1208920048-130

103.34102.91113.32

8910048 368.168930048-1108930048-1208930048-130

264.10260.10382.35

8940027 64.75

315 DN300 (12") 455 25 406 12 26 M24 8900049 115.958920049-1508920049-2008920049-240

213.91245.52300.93

8910049 495.258930049-1608930049-2008930049-250

432.03587.86697.58

8940014 57.75

355 DN350 (14") 525 29 470 12 26 M24 8900050 206.408920050-1508920050-2008920050-240

213.91245.52300.93

8910050 949.558930050-1608930049-200 8930049-250

432.03587.86697.58

8940015 113.75

BACKING FLANGES - AS2129 TABLE E



139

GALVANISED 316 SS

PE SIZE

FLANGE SIZE OD TCK

TFPCD #

HOLESø



400 DN400 (16") 580 32 521 12 26 M24 8900051 250.958920051-1508920051-2008920051-240

213.91245.52300.93

8910051 1072.168930051-1608930051-2008930051-250

432.03587.86697.58

8940016 135.00

450 DN450 (18") 640 35 584 16 26 M24 8900052 250.958920052-1508920052-2008920052-240

285.21327.36401.24

8910052 1072.168930052-1608930052-2008930052-250

576.04783.81930.11

8940028 151.25

500 DN500 (20") 705 38 641 16 26 M24 8900053 419.958920053-1508920053-2008920053-240

285.21327.36401.24

8910053 1932.118930053-1608930053-2008930053-250

576.04783.81930.11

8940018 127.50

560 DN550 (22") 760 44 699 16 30 M27 8900054 434.90 8920054 POA 8910054 1894.14 8930054 POA 8940019 297.80630 DN600 (24") 825 48 756 16 33 M30 8900055 646.85 8920055 POA 8910055 2817.22 8930055 POA 8940020 162.50710 DN700 (28") 910 51 845 20 33 M30 8900056 POA 8920056 POA 8910056 POA 8930056 POA 8940021 POA800 DN800 (32") 1060 54 984 20 36 M33 8900057 POA 8920057 POA 8910057 POA 8930057 POA 8940022 POA900 DN900 (36") 1175 64 1092 24 36 M33 8900058 POA 8920058 POA 8910058 POA 8930058 POA 8940023 POA1000 DN1000 (40") 1255 67 1175 24 39 M36 8900059 POA 8920059 POA 8910059 POA 8930059 POA 8940024 POA1200 DN1200 (48") 1490 79 1410 32 39 M36 8900060 POA 8920060 POA 8910060 POA 8930060 POA 8940025 POA

BACKING FLANGES - AS2129 TABLE E



GALVANISED 316 SS

PE SIZE

FLANGE SIZE OD TCK

TFPCD #

HOLESø



63 DN50 (2") 150 11 114 4 18 M16 8900036 11.358920036-0658920036-0808920036-100

15.4420.8520.79

8910036 41.928930036-0658930036-0808930036-100

35.2349.1043.23

8940006 10.75

75 DN65 (2-1/2") 165 11 127 4 18 M16 8900037 13.008920037-0658920037-0808920037-100

15.4420.8520.79

8910037 48.378930037-0658930037-0808930037-100

35.2349.1043.23

8940007 12.60

90 DN80 (3") 185 11 146 4 18 M16 8900061 14.158920061-0658920061-0808920061-100

15.4420.8520.79

8910061 58.838930061-0658930061-0808930061-100

35.2349.1043.23

8940008 12.15

110 DN100 (4") 215 13 178 4 18 M16 8900062 22.458920062-0658920062-0808920062-100

15.4420.8520.79

8910062 93.068930062-0658930062-0808930062-100

35.2349.1043.23

8940009 16.15

125 DN100 (4") 215 13 178 4 18 M16 8900063 21.058920063-0658920063-0808920063-100

15.4420.8520.79

8910063 87.418930063-0658930063-0808930063-100

35.2349.1043.23

8940009 16.15

160 DN150 (6") 280 13 235 8 18 M16 8900013 35.658920013-0658920013-0808920013-100

30.8741.7141.59

8910013 143.798930013-0658930013-0808930013-100

70.4498.1986.47

8940011 31.75

180 DN150 (6") 280 13 235 8 18 M16 8900014 32.958920014-0658920014-0808920014-100

30.8741.7141.59

8910014 132.588930014-0658930014-0808930014-100

70.4498.1986.47

8940011 31.75

200 DN200 (8") 335 19 292 8 18 M16 8900064 56.158920064-0658920064-0808920064-100

30.8741.7141.59

8910064 258.298930064-0658930064-0808930064-100

70.4498.1986.47

8940012 36.25

225 DN200 (8") 335 19 292 8 18 M16 8900065 54.958920065-0658920065-0808920065-100

30.8741.7141.59

8910065 252.648930065-0658930065-0808930065-100

70.4498.1986.47

8940012 36.25

250 DN250 (10") 405 19 356 8 22 M20 8900066 80.258920066-1108920066-1208920066-130

68.9068.6175.55

8910066 369.448930066-1108930066-1208930066-130

176.06173.40254.90

8940013 48.25

BACKING FLANGES - AS4087 PN16



141

GALVANISED 316 SS

PE SIZE

FLANGE SIZE OD TCK

TFPCD #

HOLESø



280 DN250 (10") 405 19 356 8 22 M20 8900067 76.358920067-1108920067-1208920067-130

68.9068.6175.55

8910067 351.318930067-1108930067-1208930067-130

176.06173.40254.90

8940013 48.25

315 DN300 (12") 455 23 406 12 22 M20 8900068 109.458920068-1108920068-1208920068-130

103.34102.91113.32

8910068 504.008930068-1108930068-1208930068-130

264.10260.10382.35

8940014 57.75

355 DN350 (14") 525 30 470 12 26 M24 8900050 206.408920050-1508920050-2008920050-240

213.91245.52300.93

8910050 949.558930050-1608930050-2008930050-250

432.03587.86697.58

8940015 113.75

400 DN400 (16") 580 30 521 12 26 M24 8900069 235.318920069-1508920069-2008920069-240

213.91245.52300.93

8910069 1082.518930069-1608930069-2008930069-250

432.03587.86697.58

8940016 135.00

450 DN450 (18") 640 30 584 12 26 M24 8900070 219.408920070-1508920070-2008920070-240

213.91245.52300.93

8910070 1009.978930070-1608930070-2008930070-250

432.03587.86697.58

8940017 113.51

500 DN500 (20") 705 38 641 16 26 M24 8900053 419.958920053-1508920053-2008920053-240

285.21327.36401.24

8910053 1932.118930053-1608930053-2008930053-250

576.04783.81930.11

8940018 127.50

630 DN600 (24") 825 48 756 16 30 M27 8900071 654.85 8920071 POA 8910071 3013.33 8930071 POA 8940020 162.50710 DN700 (28") 910 56 845 20 30 M27 8900072 POA 8920072 POA 8910072 POA 8930072 POA 8940021 POA800 DN800 (32") 1060 56 984 20 36 M33 8900073 POA 8920073 POA 8910073 POA 8930073 POA 8940022 POA900 DN900 (36") 1175 66 1092 24 36 M33 8900074 POA 8920074 POA 8910074 POA 8930074 POA 8940023 POA1000 DN1000 (40") 1255 66 1175 24 36 M33 8900075 POA 8920075 POA 8910075 POA 8930075 POA 8940024 POA1200 DN1200 (48") 1490 76 1410 32 36 M33 8900076 POA 8920076 POA 8910076 POA 8930076 POA 8940025 POA




GALVANISED 316 SS

PE SIZE

FLANGE SIZE OD TCK

TFPCD #

HOLESø



63 DN50 (2") 165 15 127 4 18 M16 8900077 POA8920077-0658920077-0808920077-100

15.4420.8520.79

8910077 POA8930077-0658930077-0808930077-100

35.2349.1043.23

8950001 17.50

75 DN65 (2-1/2") 185 15 146 8 18 M16 8900078 POA8920078-0658920078-0808920078-100

30.8741.7141.59

8910078 POA8930078-0658930078-0808930078-100

70.4498.1986.47

8950002 23.75

90 DN80 (3") 205 15 165 8 18 M16 8900079 POA8920079-0658920079-0808920079-100

30.8741.7141.59

8910079 POA8930079-0658930079-0808930079-100

70.4498.1986.47

8950003 22.30

110 DN100 (4") 230 19 191 8 18 M16 8900080 POA8920080-0658920080-0808920080-100

30.8741.7141.59

8910080 POA8930080-0658930080-0808930080-100

70.4498.1986.47

8950004 31.25

125 DN100 (4") 230 19 191 8 18 M16 8900081 POA8920081-0658920081-0808920081-100

30.8741.7141.59

8910081 POA8930081-0658930081-0808930081-100

70.4498.1986.47

8950004 31.25

160 DN150 (6") 305 24 260 12 22 M20 8900082 POA8920082-1108920082-1208920082-130

103.34102.91113.32

8910082 POA8930082-1108930082-1208930082-130

264.10260.10382.35

8950006 45.55

180 DN150 (6") 305 24 260 12 22 M20 8900083 POA8920083-1108920083-1208920083-130

103.34102.91113.32

8910083 POA8930083-1108930083-1208930083-130

264.10260.10382.35

8950006 45.55

200 DN200 (8") 370 24 324 12 22 M20 8900084 POA8920084-1108920084-1208920084-130

103.34102.91113.32

8910084 POA8930084-1108930084-1208930084-130

264.10260.10382.35

8950007 58.50

225 DN200 (8") 370 24 324 12 22 M20 8900085 POA8920085-1108920085-1208920085-130

103.34102.91113.32

8910085 POA8930085-1108930085-1208930085-130

264.10260.10382.35

8950007 58.50

250 DN250 (10") 430 30 380 12 26 M24 8900086 POA8920086-1508920086-2008920086-240

285.21327.36401.24

8910086 POA8930086-1608930086-2008930086-250

432.03587.86697.58

8950008 73.50



Gasket Material: FIBRE TG: 1.5mmGalvanised bolts are not recommended for use with stainless steel flanges due to potential galvanic corrosion issues.


143

GALVANISED 316 SS

PE SIZE

FLANGE SIZE OD TCK

TFPCD #

HOLESø



280 DN250 (10") 430 30 380 12 26 M24 8900087 POA8920087-1508920087-2008920087-240

285.21327.36401.24

8910087 POA8930087-1608930087-2008930087-250

432.03587.86697.58

8950008 73.50

315 DN300 (12") 490 30 438 16 26 M24 8900088 POA8920088-1508920088-2008920088-240

213.91245.52300.93

8910088 POA8930088-1608930088-2008930088-250

576.04587.86697.58

8950009 85.00

355 DN350 (14") 550 30 495 16 30 M27 8900089 POA 8920089 POA 8910089 POA 8930089 POA 8950010 106.25400 DN400 (16") 610 38 552 20 30 M27 8900090 POA 8920090 POA 8910090 POA 8930090 POA 8950011 127.75450 DN450 (18") 675 38 610 20 33 M30 8900091 POA 8920091 POA 8910091 POA 8930091 POA 8950012 150.00500 DN500 (20") 735 48 673 24 33 M30 8900092 POA 8920092 POA 8910092 POA 8930092 POA 8950013 175.50630 DN600 (24") 850 58 781 24 36 M33 8900093 POA 8920093 POA 8910093 POA 8930093 POA 8950014 190.25710 DN700 (28") 935 58 857 24 36 M33 8900094 POA 8920094 POA 8910094 POA 8930094 POA 8950015 POA800 DN800 (32") 1015 58 940 28 36 M33 8900095 POA 8920095 POA 8910095 POA 8930095 POA 8950016 POA900 DN900 (36") 1185 68 1105 32 39 M36 8900096 POA 8920096 POA 8910096 POA 8930096 POA 8950017 POA



Note: All dimensions in mm unless otherwise noted. Gasket Material: FIBRE TG: 1.5mmGalvanised bolts are not recommended for use with stainless steel flanges due to potential galvanic corrosion issues.


GALVANISED 316 SS

PE SIZE

FLANGE SIZE OD TCK

TFPCD #

HOLESø

HOLEBOLT TYPE FLANGE PRICE STUD SET -


63 DN50 (2") 165 19 127 4 18 M16 8900099 22.08 8920099-110 29.00 8910099 101.94 8930099-110 62.00 8950001 17.5075 DN65 (2-1/2") 185 19 146 8 18 M16 8900100 25.70 8920100-110 58.00 8910100 118.74 8930100-110 124.01 8950002 23.7590 DN80 (3") 205 24 165 8 18 M16 8900101 38.83 8920101-110 58.00 8910101 179.14 8930101-110 124.01 8950003 22.30110 DN100 (4") 230 24 191 8 18 M16 8900102 47.30 8920102-110 58.00 8910102 218.86 8930102-110 124.01 8950004 31.25125 DN100 (4") 230 24 191 8 18 M16 8900103 45.07 8920103-110 58.00 8910103 208.01 8930103-110 124.01 8950004 31.25

160 DN150 (6") 305 31 260 12 22 M20 8900104 100.16 8920104-130 135.00 8910104 462.68 8930104-130 270.00 8950006 45.55180 DN150 (6") 305 31 260 12 22 M20 8900105 93.87 8920105-130 135.00 8910105 433.83 8930105-130 270.00 8950006 45.55200 DN200 (8") 370 31 324 12 22 M20 8900106 136.37 8920106-130 135.00 8910106 630.23 8930106-130 270.00 8950007 58.50225 DN200 (8") 370 31 324 12 22 M20 8900107 134.19 8920107-130 135.00 8910107 620.29 8930107-130 270.00 8950007 58.50250 DN250 (10") 430 38 381 12 26 M24 8900108 208.06 8920108-150 258.00 8910108 961.65 8930108-150 621.60 8950008 73.50280 DN250 (10") 430 38 381 12 26 M24 8900109 199.68 8920109-150 258.00 8910109 922.86 8930109-150 621.60 8950008 73.50315 DN300 (12") 490 38 438 16 26 M24 8900110 254.98 8920110-150 344.00 8910110 1178.80 8930110-150 828.80 8950009 85.00355 DN350 (14") 550 48 495 16 30 M27 8900111 409.54 8920111-170 680.00 8910111 1893.14 8930111-170 920.00 8950010 106.25400 DN400 (16") 610 48 552 20 30 M27 8900112 473.50 8920112-170 850.00 8910112 2188.86 8930112-170 1150.00 8950011 127.75450 DN450 (18") 675 58 610 20 33 M30 8900113 561.92 8920113-190 670.01 8910113 2597.03 8930113-190 1863.00 8950012 150.00500 DN500 (20") 735 58 673 24 33 M30 8900114 777.70 8920114-190 804.00 8910114 3594.69 8930114-190 2235.60 8950013 175.50630 DN600 (24") 850 68 781 24 36 M33 8900115 1088.96 8920115-210 1272.00 8910115 5033.60 8930115-210 5878.80 8950014 190.25710 DN700 (28") 935 78 857 24 36 M33 8900116 POA 8920116-210 1272.00 8910116 POA 8930116-210 5878.80 8950015 POA800 DN800 (32") 1060 84 984 28 36 M33 8900117 POA 8920117-210 1484.00 8910117 POA 8930117-210 6858.60 8950016 POA900 DN900 (36") 1185 94 1105 32 39 M36 8900118 POA 8920118 POA 8910118 POA 8930118 POA 8950017 POA



Note: All dimensions in mm unless otherwise noted. Gasket Material: FIBRE TG: 1.5mmGalvanised bolts are not recommended for use with stainless steel flanges due to potential galvanic corrosion issues.


145

GALVANISED 316 SS

PE SIZE

FLANGE SIZE OD TCK PCD #

HOLESø

HOLEBOLT TYPE* FLANGE PRICE BOLT SET -


20 DN15 (1/2") 88.9 9.7 60.5 4 15.9 1/2" 8900121 POA8920121-408920121-508920121-60

9.249.8611.61

8910121 POA8930121-408930121-508930121-60

19.4019.7924.01

8940029 7.50

25 DN20 (3/4") 98.6 11.2 69.9 4 15.9 1/2" 8900122 6.308920122-408920122-508920122-60

9.249.8611.61

8910122 21.348930122-408930122-508930122-60

19.4019.7924.01

8940030 9.00

32 DN25 (1") 108 12.7 79.2 4 15.9 1/2" 8900123 POA8920123-408920123-508920123-60

9.249.8611.61

8910123 POA8930123-408930123-508930123-60

19.4019.7924.01

8940031 10.00

40 DN32 (1-1/4") 117.3 14.2 88.9 4 15.9 1/2" 8900124 POA8920124-408920124-508920124-60

9.249.8611.61

8910124 POA8930124-408930124-508930124-60

19.4019.7924.01

8940032 11.50

50 DN40 (1-1/2") 127 15.7 98.6 4 15.9 1/2" 8900125 10.508920125-408920125-508920125-60

9.249.8611.61

8910125 42.298930125-408930125-508930125-60

19.4019.7924.01

8940033 13.50

63 DN50 (2") 152.4 17.5 120.7 4 19.1 5/8" 8900126 POA8920126-658920126-808920126-100

15.4420.8520.79

8910126 POA8930126-658930126-808930126-100

35.2349.1043.23

8940034 18.00

75 DN65 (2-1/2") 177.8 20.6 139.7 4 19.1 5/8" 8900127 POA8920127-658920127-808920127-100

15.4420.8520.79

8910127 POA8930127-658930127-808930127-100

35.2349.1043.23

8940035 24.00

90 DN80 (3") 190.5 22.4 152.4 4 19.1 5/8" 8900128 POA8920128-658920128-808920128-100

15.4420.8520.79

8910128 POA8930128-658930128-808930128-100

35.2349.1043.23

8940036 27.50


BACKING FLANGES - ASME B16�5 ANSI 150#

* Plasson offersM12 for 1/2”M16 for 5/8”Please check suitability for your system.

Galvanised bolts are not recommended for use with stainless steel flanges due to potential galvanic corrosion issues.

146

Quality matters. Whether it is the extensive time spent in R&D on fittings or partnering with world leading manufactures such as SIMONA and PF, quality is at the forefront of all that Plasson do.

The backing flange program to suit SIMONA stub flanges is no different and it is not by chance that Plasson supplies industry leading flanges.

Prior to a purchase, a qualified metallurgist inspects the flange mill to ensure that the quality processes stipulated by the Australian Standards are being followed.

All Plasson flanges are traceable via heat number through all parts of the production process right back to the raw material physical and chemical checks.

It is not enough to say that Plasson stainless steel flanges are made from grade 316 stainless steel. Each individual flange is checked via X-ray Flurescence to ensure the chemical composition of the flange aligns with the requirements of the standard. There can be no substitution of cheaper grades leading to non-compliance with the Australian Standards and potential failures.

All Plasson flanges are marked with the appropriate standard. This allows the user to easily identify the pressure rating of the flange and reduce the chance of a flange with incorrect pressure rating being installed.

The Plasson Quality program gives Plasson the only flange in the Australian market which fully complies with the PIPA POP007 guideline.

IF QUALITY IS IMPORTANT TO YOUR BUSINESS, RELY ON PLASSON’S QUALITY.

PLASSON QUALITY FLANGES

Date post:	17-Jan-2020
Category:	Documents
Upload:	others
View:	8 times
Download:	0 times

SIMONA Spigot Fittings and Associated Accesories...SIMONA® Spigot Fittings SIMONA is an...

Documents