+ All Categories
Home > Documents > simple, modular & compact wastewater/effluent treatment systemsFinal-A4)… ·  ·...

simple, modular & compact wastewater/effluent treatment systemsFinal-A4)… ·  ·...

Date post: 20-Apr-2018
Category:
Upload: phunglien
View: 224 times
Download: 4 times
Share this document with a friend
12
www.mattenplant.com simple, modular & compact wastewater/effluent treatment systems Wastewater/ Effluent Treatment Systems for Commercial & Industrial Applications
Transcript

www.mattenplant.com

simple, modular & compact wastewater/effluent

treatment systems

Wastewater/

Effluent

Treatment

Systems for

Commercial

& Industrial

Applications

2/12

Wastewater/

Effluent Treatment Sustaining Our Eco-systems

While the world continues to search for more advanced and cost-

effective water treatment technologies to salvage the scarcity of

clean water supply, water pollution remains ironically a

continuing threat to deprive the world of clean water resources.

Apart from the harms from natural disasters such as volcano

eruptions, earth quakes etc that contributes to contamination of

water, the advancing global economy and exploding human

population would continue to be the main factors polluting our

scarce sources of fresh water supply.

Water pollution remains a serious problem for the entire world.

It threatens the health and well being of humans, plants, animals

and the overall balance of our eco-systems.

As the world becomes more industrialized, accidental and

purposeful hazardous and waste dumping have been one of the

worst water pollution concerns.

Controlling and managing residential, commercial and industrial

wastewater/effluent at the points of use is one of the most

responsible and economical ways towards sustaining the balance

of our eco-systems, where water management is concerned.

There are numerous proven wastewater/effluent treatment

technologies, processes and systems available worldwide these

days, it is relatively a small cost to control and manage such at

individual points of use, than to pay an infinite price trying to

heal our earth collectively some day in the future.

Eco-protection SystemsMATTEN’s Range of Wastewater/Effluent Treatment Systems

3/12

Apart from various ranges of water purification systems, MATTEN

has developed a series of wastewater/effluent treatment systems

for varying industrial applications, as well as for storm water run-

off/silt water control and management purposes (particularly

suitable for construction and infrastructure project sites).

These systems are designed and manufactured in-house. Their

standard, modular and compact configurations are exceptionally

suitable for small-to-medium capacity usage in factories and

industrial processing premises.

Our systems are designed to treat wastewater/effluent in

compliance with international effluent discharge standards. For

more demanding and stringent applications, we are able to custom-

design-and-build the systems for our clients’ specific requirements.

[ Clarifier-cum-Flocculator System ]

[ Batch Treatment Plant ]

[ Continuous Treatment Plant ]

4/12

standard

& modular

Batch

Treatment

Plant

…bringing simplicity into

wastewater/effluent treatment…

The new M●ECO-BTP series is a range of complete fully

automatic batch treatment plants for most industrial

effluents where dissolved solids are precipitated by

settlement and de-watered using filter press.

The basic process is fill treat de-sludge (de-

watered) decant.

The M●ECO-BTP series comes in standard HM (Heavy

Metal) version, CR (Chrome Reduction) or CN (Cyanide

Oxidation) versions.

Treated effluent from the BTP meets most discharge

limits across the world.

5/12

MODELDIMENSION(L x W x H)

(m)

BATCHVOLUME

(Litres)

SLUDGE CAPACITY

(Litres)

PIPE SIZE (mm / inch )

POWER(Amp)

415/3/50Inlet Outlet

BTP - 1 5.5 x 2.00 x 2.25 1000 500 25 / 1.0 40 / 1.5 20

BTP - 2 6.0 x 2.20 x 2.25 2000 700 40 / 1.5 50 / 2.0 20

BTP - 4 7.5 x 2.25 x 2.25 4000 1400 50 / 2.0 75 / 3.0 40

MODEL

CHEMICAL TANK VOLUME(Litres)

NaOH HCL COAG FLOC

BTP - 1 100 100 100 100

BTP - 2 200 200 200 200

BTP - 4 300 300 300 300

Compliance

Treated water complies with

sewer discharge limits in

most countries

Add on Pre/Post Treatment

Module to meet water course

limits

Technical Specifications

Chemical Tanks’ Capacities

(includes 5% engineering factor)

Quality

PLC control with keypad interface versions

High chemical efficiency

Digital pH / ORP meter indicates treated

water quality continuously

Visible alarm messages with 16 audible

alarm choices

Versions

HM - Heavy Metals

CR - Chrome Reduction

CN - Cyanide Destruction

1, 2 & 4m3/hr capacities

Main Components

FRP Treatment tank & sludge thickening tank,

filter press, AOD transfer & filter press pumps,

PE chemical tanks & metering pumps, VSD driven

motorized agitator, PLC based control panel c/w

HMI, fully plumbed, wired and ready to use

Skid-Mounted,

Pre-Commissioned

Lowsite installationcosts

Small footprint with compact ready to ship skid

mountedplant

Packagedinto modularsystem with 3 models

Minimalstart-uptime

6/12

Main Equipment

Control Fully automatic PLC with keypad interface

Controller pH ( & ORP for CR, CN version )

Control cabinet Epoxy painted steel to IP55

Pump Air operated double diaphragm

Dosing pumps Motor driven metering pump

Mixers Variable speed drive & gear reduced

Tank Fibreglass reinforced plastic (FRP) / Polypropylene (PP)

Chemical tank High density polyethylene (HDPE)

Filter press Chamber press, manual hydraulic closure

Sludge tray SS304

Piping, valves & fittings SCH 80 PVC

Compressed air Nickel plated steel pipe

Others Air pressure regulator with filter and lubricator

Conditions of Operation

Cyanide or Chrome6+ will require pre-treatment

Dissolved metal with chelating agent is to be treated separately

Only rinse water is treated. Not designed for concentrate dump

Compressed air (CDA) of working pressure 7 bar.

Headroom of min. 4.5m.

Influent temperature : 5C > 35C

Typical Applications

Electroplating

Electronics

Chemical

Pharmaceutical

Powder Coating

Automotive

Paint

Leather

7/12

standard

& modular

Continuous

Treatment

Plant

…bringing simplicity

into wastewater/

effluent treatment…The M●ECO-CTP systems are designed for continuous

wastewater/effluent treatment to remove heavy metals

or colloidal.

Like the BTP series they are fully PLC-based with keypads

for entry of parameters and with proportionate dosing of

coagulant, polymer and sludge de-watering functions.

Capacity 2 to 15 m3/hr (65gpm).

(Please contact us or our distributor/agent for enquiries).

8/12

Our M●ECO-CLF series are hybrid clarifier cum

flocculator systems. They are designed to meet the

environmental requirements for storm water-runoff set

forth by the Public Utilities Board (PUB).

The system incorporates a smart program that senses an

incoming flow of soiled water and automatically dose in

the pre-set amount environment-friendly coagulant and

polymer into the water. The flocculator ensures the

polymer is mixed well with the soil in the water to form

large settle-able floccs.

Once the floccs flow into the settlement zone, they will

settle down rapidly to the sludge thickening zone while

the clear water flows up to the surface and overflow

through the V-notched weir to be discharged into the

surface drain. The thickened sludge at the bottom is

drained out by gravity through an automatic motorized

ball valve. This is actuated at a pre-program

proportionate fixed rate to the incoming storm water

run-off.

Hybrid

Clarifier

Cum

Flocculator

System

for storm

water

run-off/

silt water

control &

management

measures

9/12

Our Systems Offer/Include

24 hrs fully automated control

bm SOLUTION series of coagulant and flocculant

Simple to operate and maintain

No moving parts

Modular unit

Hybrid Clarifier cum flocculator

The clean water discharge complies with

PUB/Earth Control Measurement Act (ECM) (Cap294) Regulation 4(1)

TSS of <50 mg/L.

MODELCAPA-CITY

(m3/hr)

CONNECTIONS SLUDGEEFF. TANK VOLUME

SLUDGE VOLUME

ØHeight

(m)WEIGHT

(tons)

Inlet (inch)

Outlet(inch)

Outlet(inch)

(m3) (m3) (m)Straight

Wall Conical Total Dry Wet

CLF-10 2-10 2 4 2 4.2 1.3 1.8 1.5 1.1 2.8 1.8 6

CLF-20 10-20 3 6 2 8.4 2.61.8 x 2

1.5 1.1 2.8 3.0 12

Technical Specifications

(5% engineering safety included)

Main Equipment

Flow Throttling Valve PVC Sch. 80 - diaphragm valve

Pressure Gauge 0~50psi - SS304 casing with 2½” Dial Face &¼” MNPT connection

Coagulant & Flocculant Dosing Pumps

M●FLOW-AX1-300/500/1KO-HVX-Z. 30 watts @ 230V/1/50.Reinforced PP pump head with Teflon lined diaphragmIncludes anti-siphon check valves; foot valve with strainer and PVC hose.

Motorized Valve 30 watts; 230V/1/50 Electric actuated motorized valve (2”) PVC ball valve with illuminated indication & Manual overrides key.

Control PanelIP65 Double Door Panel in matt blue.Smart Relay Controller for auto dosing and de-sludging.

FlocculatorNon electric self-flocculating chamber.Constructed in Fibreglass Reinforced Plastic.

Clarifier Body

Constructed in Fibreglass Reinforced Plastic with M.S epoxy coated structure legs; lifting lugs; panel & dosing pumps mounting brackets; pre-wired & pre-plumbed. Accessories includes: V-notched overflow weir; Flocculator support; conical bottom, sludge outlet, 8” inspection manholes.

OPTIONALSAuxiliary contacts for recycling pump control; Recycling Water Storage (HDPE tank); Booster Pump control; Sludge Pump interlock; Submersible Pump interlock.

10/12

Conditions for Operations

Incoming Water Pressure > 20 psig.

Incoming Power Supply 13A; 230VAC / 1 Phase / 50 Hz.

Floor Level Strengthened Floor for above wet loads.

Access Easy for 20ft lorry unloading.

Sludge Drain Point < 3m away & sludge gravitate

Drain Point < 10m horizontal distance and 2.5m above.

Connection ANSI Flange 150lbs.

Multiple Modules Distribution Box is required to ensure balance flow into each module.

11/12

Ngee Ann Polytechnic

Apart from in-house R&D/ innovation programs, we collaborate

on a long-term basis with the established and well-known Centre

of Innovation (Environmental & Water Technology) of Ngee Ann

Polytechnic of Singapore for:

(a) Performance tests & validations of our systems

(b) R&D/innovation on improvement & enhancement of our

systems and products

(c) Exploration & adoption of new water technologies & systems

Innovation/R&DContinual Innovation and Strategic R&D Collaboration

12/12

Profiles

Other References

MattenPlant Pte Ltd

100 Tagore Lane

Singapore 787 540

T (65) 6759 2977

F (65) 6851 7340

W www.mattenplant.com

Enquiry: [email protected]

Contact us

Our other treatment systems include

- comprehensive range of

Ultrafiltration (UF) systems

- Comprehensive range of

Reverse Osmosis (RO) systems

- comprehensive range of

Ion Exchange (IX) systems

“…first water company in Singapore to have won

Singapore Prestige Brand Awards…”

“…pioneer in applying UF technologies for grey & rain water harvesting for Green

Mark Industry in Singapore…”

“We strive to make advanced and sophisticated

water technologies simple for your peace-of-

mind and hassle- free operations and

applications, offering values beyond conventional

quality, reliability and durability.”

Water Technologies Made Simple

About us

Our business for water industries began in 1994. Over the years,

we have evolved from providing the industries with engineering

and technical services for water applications, to a leading

manufacturer of a comprehensive range of standard, modular and

packaged (and custom-designed-and-built) water treatment

systems of Ultrafiltration (UF), Reverse Osmosis (RO) and Ion-

exchanger (IX)/ Demineralization technologies, among others.

Based in Singapore, we carry a comprehensive range of private-

label parts and components for our systems and post-sale

purposes. We serve the regions with a wide network of well-

trained distributors/agents.


Recommended