2 hrs
1 pcs
f
0.15 mm
k
0.40 mm
h
PLA
19 g
d
MK3/S
Summary
I wanted a simple holder that would move my webcam up and down with Zaxis. I couldn't find one that I liked so I decided to model my own. I usedSolidworks 2019 student / maker edition and this came out. I used 3 zip-ties to hold the webcam down (2 for camera, 1 for cable) and it worksquite nicely. I used 1 screw (M3 x 18) from the spare bag to fix it on X-axismotor. I printed it with PLA that was shipped with printer, model did bend abit but IMHO nothing tragic. First model that I made and printed so I'll learnhow to do it better next time :) If anyone needs the original .sldprt file, Ican happily provide it. I'm using a Trust (article #18163) Zyno Full HDVideo Webcam (if anyone wanted to know) (last photo is a sample what Ican see when I'm away from home now)
3D Printers > Other Accessories
camera webcam prusa octoprint mk3s mk3 holder
I printed the model with my "logo" facing down. First layer was 0,2 mm,others were 0,15 mm. I used PLA that came with printer (grey one). After
N Nejc
Simple webcamholder formounting on X axismotor
VIEW IN BROWSER
updated 30. 7. 2019 | published 21. 7. 2019
Print Files (.gcode) DOWNLOAD ALL FILES
5.3 MB
2.30 hrs f 0.15 mm k 0.40 mm h PLA 19.00 g d MK3/S
updated 21. 7. 2019
Model Files (.stl, .3mf, .obj, .amf) DOWNLOAD ALL FILES
175.8 KBupdated 21. 7. 2019
43.4 KBupdated 21. 7. 2019
printing I removed support with pliers, what was still stuck inside the hole,I got out with hex key (that was included in box with printer).
License
This work is licensed under a Creative Commons (4.0 International License)
Attribution
✖ | Sharing without ATTRIBUTION ✔ | Remix Culture allowed ✔ | Commercial Use ✔ | Free Cultural Works ✔ | Meets Open Definition
webcam_holder_015mm_pla_mk3s_2h18m.gcode
webcam_holder.stl
webcam_holder.3mf