April / May 2018
SR Vivodent®
S DCLThe exceptionally aesthetic tooth for sophisticated needs
Simply brilliant!
• 16 A–D and 4 Bleach Shades• Highly cross-linked DCL material• Innovative mould design• Closely imitate the properties of natural teeth
See page 3 for more information
NEW
Removable
* Terms & Conditions apply.
Choose to make your patient smile with Ivoclar Vivadent teeth
Ivoclar Vivadent
Teeth
SR Vivodent S PE/S DCL
Ivostar/Gnathostar
You choose…
SR Phonares II New, modern mould and shade conceptS PE in 20 Pearl Effect shadesS DCL In 16 A–D and 4 Bleach shades
Exceptional lifelike aestheticsPremium composition and qualityInnovative tooth mould concept - soft or bold - youthful, universal or mature
Harmonised layering of PMMA structureThe economically optimised selection Available in A-D shades
NEW
Buy on consignment • Have your working stock on hand
– WITHOUT ANY OUTLAY
• Patients get to see and choose the teeth they like
• Pay as you use
Trade-in deals… Why not clean out your old
competitor stock?
SR Phonares II
& SR Vivodent S PE/
S DCL are integrated
into Ivoclar Vivadent’s
Digital Workflow
2Prices exclude GST, freight & installation, and may change without notice.
1300 486 252 www.ivoclarvivadent.com.au
Two tooth lines –one aesthetic result
SR Vivodent® S PE | S DCL
Simply brilliant!
Anterior tooth characteristicsDesigned by nature, tried-and-tested a million times overThe anterior moulds are designed to meet the essential requirements that every modern denture tooth should fulfil:
Harmonious enamel covering on all sides, providing room for creativity in the setup of anterior teeth
Wide tooth neck to cover structural elements
Specially designed interdental closures for enhanced white aesthetics
36 Shades to choose from…
Today's patients place a great deal of value on aesthetics. That's why I use SR Vivodent S PE – for a successful combination of naturalness and strength.
Pasquale Lacasella, Italy
„„
SR Vivodent S PE 20 PE shades
SR Vivodent S DCL 16 A–D and 4 Bleach shades
The PE shades reflect the shade characteristics typically found in older patients.
A–D and Bleach shades are frequently used in combination prosthetics.
Book your course online at: www.dentevents.com
Ivoclar Vivadent Continuing Education for 2018
Removable
NEW A-D
SHADES
BPS® & Suction-Effective Mandibular Complete Dentures – Live PatientStephen McGlynn & Arnie Jabour
Sydney ICDE Monday 16 AprilMelbourne Thursday 21 MayAdelaide Monday 4 JuneBrisbane ICDE Monday 23 JulyPerth ICDE Monday 17 Sept
BPS® & Suction-Effective Mandibular Complete Dentures - Certification CourseStephen McGlynn & Arnie Jabour
Sydney ICDE Tue 17 - Wed 18 AprilMelbourne Tue 22 - Wed 23 MayAdelaide Tue 5 - Wed 6 JuneBrisbane ICDE Tue 24 - Wed 25 JulyPerth ICDE Tue 18 - Wed 19 Sept
3Prices exclude GST, freight & installation, and may change without notice.
1300 486 252 www.ivoclarvivadent.com.au
Book your course online at: www.dentevents.com
Ivoclar Vivadent Continuing Education for 2018
CONTACT ONE OF US TODAY ON 1300 486 252 TO ORGANISE A DEMONSTRATION, AND SEE HOW EASY IT IS TO GO DIGITAL
Digital
Get into Digital with Ivoclar Vivadent’s Amazing Offers and Excellent Support Team
8 FULL
TIME TEAM
MEMBERS in
Australia and
New Zealand
Want to learn more about 3Shape Dental Systems and Ivoclar Digital support? Register for one of our courses, learn and get the course fees off of your scanner purchase!*
Do more Digitally with 3Shape & Ivoclar Digital - LabsideJoseph Tavella 1-day Lecture & Hands-on
*valid 2 weeks following the course
Trade-in your desktop scanner!
Ask your Territory Manager for more
information.
List of Trade-in scanners: 3M (Lava ST), Amann Girrbach (Map 100/Map 300/Map 400), Axsys Dental (DOF Freedom/Freedom HD/Swing/Prime), B&D (Origin Intelligence w. Exocad), Dental Direct (Activity 102/DD Argus M1), Dental Wings (ALL), Dentsply (Cercon Eye), Etkon/Strauman (ALL), I-Metric (IScan), Kavo (Kavo Everest), Maestro (A20/A50/MDS400), Medit (Identica/Identica Blue/Identica Hybrid), Nobel Biocare (Forte, 2G), Open Technologies (Easy/Smart/Deluxe/Revenge), SHINING AutoScan (DS100/DS200+/DS300), Sirona (inEos, X5), Smartoptics (ALL), Zfx (Zfx Scan II/Scan III/Zfx Evolution), Zirkonzahn (Zirkonzahn 3D Scanner/Pentograf).
Dental System PremiumDesign an unlimited number of advanced cases with Premium.For the lab that wants to scan and design crown and bridge cases, but also advanced cases such as telescopes and post & core. Includes the ability to receive TRIOS cases.
Dental System Complete RestorativeNEW The Dental System Restorative package provides unlimited access to designing any restorative case while significantly reducing costs for customers using multiple add-on design modules.Provides unlimited access to design any restorative case without purchasing add-ons.
Trade-in Deals
Can Apply!
Trade-in Deals
Can Apply!
Melbourne Thursday 26 AprilBrisbane ICDE Friday 27 AprilSydney ICDE Monday 30 AprilAdelaide ADA Tuesday 1 MayPerth ICDE Thursday 3 May
Contact us for 3Shape Dental System pricing, or for more information
4Prices exclude GST, freight & installation, and may change without notice.
1300 486 252 www.ivoclarvivadent.com.au
Digital
Get into Digital with Ivoclar Vivadent’s Amazing Offers and Excellent Support Team
DIGITAL DENTURETHE FAST MONOLITHIC PROCESS
Mill your digital dentures with the new powerful machines from the innovative
PrograMill platform range. The perfect coordination of the materials and the CAD and CAM software with the milling units, produces precise and high quality dentures.
For me, the biggest advantage is that I can still work with the well proven BPS concept and other clinical techniques. There is practically nothing that I need to change in my clinical workflow.
Arnie Jabour Dental Prosthetist, Australia
„ „
EASY AND FAST DENTURE MILLING DIRECTLY IN THE LABORATORY
INDICATIONSSingle-arch complete denture (upper or lower)
Complete dentures (upper and lower)
Duplicate complete dentures (upper and lower)
Immediate complete dentures (upper and lower)
Book your course online at: www.dentevents.com
Ivoclar Vivadent Continuing Education for 2018
BPS® & Suction-Effective Mandibular Complete Dentures – Live PatientStephen McGlynn & Arnie Jabour
Sydney ICDE Monday 16 AprilMelbourne Thursday 21 MayAdelaide Monday 4 JuneBrisbane ICDE Monday 23 JulyPerth ICDE Monday 17 Sept
BPS® & Suction-Effective Mandibular Complete Dentures - Certification CourseStephen McGlynn & Arnie Jabour
Sydney ICDE Tue 17 - Wed 18 AprilMelbourne Tue 22 - Wed 23 MayAdelaide Tue 5 - Wed 6 JuneBrisbane ICDE Tue 24 - Wed 25 JulyPerth ICDE Tue 18 - Wed 19 Sept
5Prices exclude GST, freight & installation, and may change without notice.
1300 486 252 www.ivoclarvivadent.com.au
Crown & Bridge
IPS e.max®
ZirCAD INNOVATIVE AND VERSATILE ZIRCONIUM OXIDE
Save time and try the most aesthetic zirconia with the new IPS e.max® ZirCAD MT MultiIPS e.max ZirCAD MT Multi is designed for the anterior and posterior region. The progression of shade and translucency maximises the appearance of monolithic crowns and bridges without necessitating the application of characterisations and optimises the efficiency in the lab.
Indications• Monolithic crowns • Monolithic three-unit bridges, anterior and posterior• Implant-supported superstructures
IPS e.max® Ceram selection and Ceram Power The IPS e.max Ceram Enamel and Effect materials allow even more creative freedom and individuality in the layering technique. IPS e.max Ceram Selection comprises a selection of twelve special materials. They facilitate the reproduction of individual characteristics in highly aesthetic, natural-looking restorations.
Advantages • New, coordinated layering materials for more creativity and
individuality • Specific increase or reduction of the brightness value • Natural-looking effects and expressive aesthetics
Strength of
850MPa! Strength of
850MPa! Strength of
1,200MPa! Strength of
1,150MPa!
Programat Furnaces SPECIALS!
6Prices exclude GST, freight & installation, and may change without notice.
1300 486 252 www.ivoclarvivadent.com.au
JOTA KIT 1433LS-Gloss LaboratoryAll you need for a perfect lithium disilicate restoration!
Crown & Bridge
IPS e.max® Press IPS e.max Press is the premium original lithium disilicate glass-ceramic (LS2) for the press technique. It is characterised by its combination of exceptional aesthetics and user-friendly processing.
IPS e.max® Press Multi A lifelike colour transition from the dentine region to the incisal areas. The IPS e.max Press Multi ingots revolutionise the press technique. They are composed of the clinically proven lithium disilicate glass-ceramic (LS2) and show a graduated level of shade and translucency similar to that of natural teeth: The chroma and opacity of the material are higher in the cervical and dentine region, and the incisal areas are suitably translucent.
IPS e.max® CAD Monolithic Solutions IPS e.max CAD Monolithic Solutions streamlines the fabrication of full-contour restorations that demonstrate high strength, durability and proven clinical properties. A wide variety of restorations can be produced with these materials – from thin veneers to three-unit bridges.
IPS Ivocolor IPS Ivocolor is a universal range of Stain and Glaze materials for the press, CAD and layering ceramics from Ivoclar Vivadent. Now dental technicians only need one assortment to customise and glaze their restorations. This allows you to work more effectively, improve the economic efficiency of the lab and achieve restorations of a consistently high quality.
CAD/CAM Master Course Szabolcs Hant - 1-day Hands-on
Perth ICDE Friday 11 MayBrisbane ICDE Friday 17 AugustSydney ICDE Tuesday 6 November
Aesthetic Restorations with IPS e.max® Szabolcs Hant - 1-day Hands-on
Perth ICDE Thu 7 - Fri 8 June
Book your course online at: www.dentevents.com
Ivoclar Vivadent Continuing Education for 2018
JOTA KIT 1434ZIR-Gloss LaboratoryAll you need for a perfect zirconium oxide restoration!• Just two polishing steps for
excellent high-gloss
Ask for our Scientific Report so you can discuss the importance of IPS e.max Press Multi’s 470MPa strength with your dentists.
2018TOP AWARDWINNER
7Prices exclude GST, freight & installation, and may change without notice.
1300 486 252 www.ivoclarvivadent.com.au
Tray Material• Blue
Dentate & Edentulous Trays • Available in small, medium or large - upper or lower
Syringe Material• Orange
Centric Tray • Reliable determination of the centric
relation• Reusable, time-saving and
economical• Autoclavable
UTS Facebow• The UTS (Universal
Transfer Bow) 3D transfer system is used for TMJ-related model transfer into an articulator
Removable
Inject the best technology in your laboratory
IvoBase InjectorPermits a fully automated, controlled injection and polymerisation procedure of special PMMA resins which are coordinated with the system. The chemical shrinkage of the resin is entirely compensated during polymerisation – due to the patented temperature control in the flask and the heater. This enables the fabrication of denture bases featuring high accuracy of fit and precision.
• “All-in-one” injector, quick and easy setting into operation possible• Controlled polymersation shrinkage for optimal accuracy of fit• No water and compressed air connection necessary
(plug and play)• Compact, modern and ergonomic design; requires only a small space• OSD indicator: current operating status visible from a distance• RMR key for a clear reduction of the residual monomer content• USB port for software updates via PC/Internet
Book your course online at: www.dentevents.com
Ivoclar Vivadent Continuing Education for 2018
BPS® & Suction-Effective Mandibular Complete Dentures – Live PatientStephen McGlynn & Arnie Jabour
Sydney ICDE Monday 16 AprilMelbourne Thursday 21 MayAdelaide Monday 4 JuneBrisbane ICDE Monday 23 JulyPerth ICDE Monday 17 Sept
BPS® & Suction-Effective Mandibular Complete Dentures - Certification CourseStephen McGlynn & Arnie Jabour
Sydney ICDE Tue 17 - Wed 18 AprilMelbourne Tue 22 - Wed 23 MayAdelaide Tue 5 - Wed 6 JuneBrisbane ICDE Tue 24 - Wed 25 JulyPerth ICDE Tue 18 - Wed 19 Sept
AccuDent® XDA two viscosity alginate impression material for complete and partial denture impressions.• Colour changing properties for precise timing of impression taking • Disposable trays to prevent cross contamination and to meet high OSH standards
8Prices exclude GST, freight & installation, and may change without notice.
1300 486 252 www.ivoclarvivadent.com.au
Stratos 100• The Average-Value Articulator
Stratos 300• The Individual Articulator
The Ultimate Motion Alginate Mixer Package!
Alginate Container• Top cover with reinforced silicon
ring seal isolating air and light• 1000g capacity
Motion Alginate Mixer Long-lasting, enhanced motor delivers high-speed torque and ensures fine mixing.• 3 memory settings allowing different
mixing times
ChromaX Alginate• Excellent dimensional stability • Stabilised hypoallergenic formula• Colour-changing phase indicator • 5-year shelf life
Metal Ceramic | Removable
IPS StyleAlloysCapricorn 15Capricorn 15 is a palladium-silver alloy with coordinated mechanical and physical properties for conventional feldspar ceramics.• Economical due to low density• Good melting and flow properties
MaxigoldGold crown and bridge alloy particularly for full crowns and longspan bridges.• Deep yellow colour• Excellent resistance to oral conditions
LodestarA clinically proven silver-free reduced gold ceramic alloy demonstrating outstanding properties.• White colour• Excellent resistance to oral conditions
Offers maximum efficiency, easy handling and life-like aesthetics.
Benefits• Optimised shrinkage behavior and
high stability during firing• Versatile modelling properties
and easy handling of the layering materials
• Oxyapatite crystals for a life-like translucency and depth effect
9Prices exclude GST, freight & installation, and may change without notice.
1300 486 252 www.ivoclarvivadent.com.au
Fixed Prosthetics
Asiga MAX™
The Asiga MAX is the world’s most advanced lab 3D printer offering exceptional productivity in a small footprint. With 62μm HD print precision, it is optimised for orthodontics, crown & bridge, surgical guides, dental models, custom trays, and partial dentures in lab and clinical environments.
Model
Cast
Splint
Ortho
Temporary
Tray
DETAX Freeprint® Model UV• 716494 - Sand• 716495 - Ivory• 716496 - Grey
DETAX Freeprint® Tray UV
DETAX Freeprint® Cast UV
DETAX Freeprint® Splint UV• 716492
DETAX Freeprint® Temp UV• 737138 A1 1kg• 737139 A2 1kg• 737140 A3 1kg
• 716498 A1 0.5kg• 716499 A2 0.5kg• 716500 A3 0.5kg
DETAX Freeprint® Ortho UV
Asiga MAX• Lifetime technical
support guarantee• Wireless network• Automated support
generation• Touch-screen
interface• Proven reliability
Molloplast BPermanent soft relining material for processing in dental laboratories. • One-component, heat curing• Improved bonding to new and
old denture base acrylics• Optimised consistency due to
new vacuum filling technique• With anti-plaque effect• MMA-free
Good Morning SprayAntibacterial spray solution for A-silicone based relinings, inhibits plaque and delays accumulation of oral microorganisms for 24 hours, without any adverse effects on the natural oral flora.• Bacteriostatic effect (inhibits bacteria growth)
due to the special combination of active substances, with chlorhexidine and ethereal oils
DON’T MISS OUR DETAX SPECIALS!
10Prices exclude GST, freight & installation, and may change without notice.
1300 486 252 www.ivoclarvivadent.com.au
Strong Hinges• Easy to separate and assemble• Durable- resists breakage• Can be heated to reposition occlusal relationship
Built-in Support Rods• Provide a verticalstop, ideal for edentulouscases
No External Walls• Flat tray for easy removaland replacement of segments
• A feature in both pin and pinless designs
Strong Hinges• Easy to separate• Durable- resists• Can be heated tocclusal relation
Stable Fit with Pin or Pinless System• Raised anti-rotational spine prevents movement of dies• Numbered bases for quick reference of dieposition
• Excellent for scanning• Pinless design eliminates pinning, drilling, gluing• Combine Pin Quadrant for working model andPinless Quadrant for opposing
No External Walls
Bu
MainStay™ PinsUnique tapered blade shape maintains precise position of dies
Digital | Consumables
Ultirock Golden BrownPremium scannable die stone.
Lean Rock IvoryQuick setting, high strength die stone
Quickstone Pink Lab StoneWith consistent handling properties and smooth creamy mix.
Economy Model Stone BuffAn economical dental stone for general purpose use.
SCANNABLESCANNABLE
The most trusted source for gypsums… rock solid!
ResinRockResin fortified, low expansion die stone.• 707921 - Grey• 707923 - Ivory• 707924 - Peach
MainStay™ Disposable Articulator System – Pin and Pinless
Full Arch Pin OR Anterior PinEach set includes 25 Articulators, 100 MainStay Pins & 3 Support Rods
Quadrant Pin OR PinlessQuadrant Pin includes 50 Articulators, 100 MainStay Pins & 3 Support Rods.
Quadrant Pinless includes 50 Articulators & 3 Support Rods.
Full Arch Pin 704916 Anterior Pin 704919
Quadrant Pin 704917Quadrant Pinless 707920
Sole 1 Workstation Single place workstation with adjustable height – from a minimum of 86cm to a maximum of 100cm. Supplied with: • Two drawers with plastic trays for the working place • Service drawer unit with three drawers• Includes light shelf, stainless steel protection plate, compressed air nozzle
and integrated vacuum extraction
11Prices exclude GST, freight & installation, and may change without notice.
1300 486 252 www.ivoclarvivadent.com.au
BPS® & Suction-Effective Mandibular Complete Dentures Digital Workflows 1-day Live Patient DemonstrationMonday 16 April - Sydney ICDE
Monday 21 May - Melbourne
Monday 4 June - Adelaide
Monday 23 July - Brisbane ICDE
Monday 17 September - Perth ICDE
Stephen McGlynn & Arnie Jabour
Comprehensive clinical and technical training, both in analogue and digital on the steps in producing a BPS SEMCD Dentures. Participants will see: the primary, frame cut back tray (FCB) and secondary impression techniques, and learn to overcome the challenges of full denture treatment. Students will be encouraged to practice the following skills in their own clinics:
• Understand the importance of BPS SEMCD Clinical to the success of Digital Dentures
• Develop an understanding of the Digital Denture workflows
• Examination of suitability for suction-effective dentures
• Primary impression using Accudent XD & frame cut back tray (FCB)
• Scanning and Design Custom tray & Gnathometer CAD and conventional Gnathometer
• Final functional BPS SEMCD impressions + Scanning and Design of Digital Try in.
• Determining the vertical and horizontal position with the Gnathometer CAD (M) or wax rims
The course, will be held in the ICDE clinic with a patient provided by Ivoclar Vivadent. The participants will be seeing, BPS - SEMCD Digital techniques. Stephen and Arnie will be taking primary impression and secondary impression, including bite registration. Model preparation, tray design set-up of pin tracer both digital and analogue.
HEAD OFFICEVIC, TAS & SA1-5 Overseas DriveNoble Park North VIC 3174Ph: +61 (0)3 9795 9599Fx: +61 (0)3 9795 9645
NSW & ACT OFFICE
25 Cleg StreetArtarmon NSW 2064Ph: +61 (0)2 9436 0400Fx: +61 (0)2 9460 9082
WA & NT OFFICE
134 Charles StreetWest Perth WA 6005Ph: +61 (0)8 9227 1555Fx: +61 (0)8 9227 9855
QLD OFFICE
3 / 53 Southgate Avenue, Cannon Hill QLD 4170Ph: +61 (0)7 3899 8500Fx: +61 (0)7 3899 8599
www.ivoclarvivadent.com.au | [email protected] | 1300 486 252
Valid 1 April — 31 May 2018 • Correct at time of print • Descriptions & data constitute no warranty of attributes. All discounts are off RRP unless stated otherwise. Equipment offers with consumables must be all on one invoice. Free goods of equal or lesser value.
Look forward into the transition from analogue to digital Removable Prosthetics. You will follow the BPS system protocols to produce precision complete dentures. BPS SEMCD Tray design and Gnathometer set-up techniques including digital workflows, will be demonstrated.
The importance of the current BPS SEMCD technical procedures, in the new rapid digital production of removable dentures, which integrates the BPS Clinical treatment steps in the dental practice with the digital denture manufacturing processes in the lab, will be demonstrated.
Workshops on characterisation and aesthetic techniques for precision dentures, will equip you with new skills in premium denture delivery.
Both Stephen and Arnie have spent the past 4 years practicing Dr Abe’s Suction Denture Impression method and completed Master Instructor training with Dr Abe. This experience enables them to teach these techniques, and combining them with the new Digital CAD and Manufacturing process.
BPS® & Suction-Effective Mandibular Complete Dentures Digital2-day Technical Certification CourseTue 17 - Wed 18 April - Sydney ICDE
Tue 22 - Wed 23 May - Melbourne
Tue 5 - Wed 6 June - Adelaide
Tue 24 - Wed 25 July - Brisbane ICDE
Tue 18 - Wed 19 September - Perth ICDE
Arnie Jabour & Stephen McGlynn
Ivoclar Vivadent Professional Development 2018
Introducing Ivoclar Vivadent’s NEW Online Ordering
Orders delivered Freight Free*
Visit www.ivoclarvivadent.com.au to register
REGISTER
TODAY!
* Standard exclusions apply.
To register for these events, and to see the full calendar of courses and programmes for Australia, please visit: www.ivoclarvivadent.com.au/icdelearn