Simply the best solution for Smart Metering in the home
The TEUBEL Switchboards Ezy-wire range
of metering, power distribution and data
enclosures are designed to make the
electricians work easier with ample room for
all wiring and circuit connections.
EZM Range Features:
� Approved by electricity supply authorities
� Avoids outdoor metering weather tightness issues
� Fits deep smart meters
� Combination metering and distribution enclosures
� Available in 30 or 45 way sizes
� Meter can be mounted top or bottom of cabinet
� Surface mount kit available
The TEUBEL Switchboard’s EZM range is the smart, no hassle choice for indoor metering and combination meter-distribution boards.
Different model options are available, including extra deep solutions to accommodate all the different types of smart meters in use by electricity retailers.
Main switches, Circuit breakers and RCD’s are not Included in any of the EZM enclosures
The EZM4 Indoor
metering cabinet is the
really practical solution
for domestic indoor Smart
Metering installations.
The EZMD (extra deep)
accommodates the deeper
smart meters which are
becoming more common
with electricity retailers.
EZM4D
Available from electrical suppliers nationwide
EZMP453
Code Description
Standard Depth - 90mm
EZM4 Indoor Metering Cabinet - 1 Smart SP Meter EZM6 Indoor Metering Cabinet - 2 Smart SP Meters EZMP302 30 Way Ezy Wire Metering & Distribution Board EZMP453 45 Way Ezy Wire Metering & Distribution Board Extra Deep - 140mm (Counties Power, WEL Networks & Others) EZM4D Indoor Metering Cabinet Deep - 1 SP Meter Only EZM6D Indoor Metering Cabinet Deep - 2 Meters SP/3P EZMP302D 30 Way Ezy Wire Metering & Distribution Board Deep EZMP453D 45 Way Ezy Wire Metering & Distribution Board Deep
Cut-Out DimensionsAll boards 355mm wide and fit within standard 100 x 50 wall framing with allowance for 10mm wall lining.EZM4 - 425mm high, EZM6 - 575mm highEZMP302 & EZMP453 - 725mm high
271 Great South Road Dury New ZealandP: 09 294 8216E: [email protected]: www.teubels.co.nz
EZM and EZMP RANGETECHNICAL INFORMATION
EZM and EZMP RANGE
The blank meter panel board can accommodate all the domestic metering and hot water control layouts required by the different network operators.A sealable main switch is required in addition to the meter cabinet.
The Ezy-wire system allows for any combination of RCCB’s, MCB’s and RCBO’s to be installed on the DIN rail with plenty of space for circuit wiring.
Note: Circuit breakers and RCD’s are not included.
DIMENSIONS
EZM4 - EZM4D
EZM6 - EZM6D
EZMP 302 & 453
EZMP 302D & 453D
Typical meter layout
725
90
140
155
355
375
745