Date post: | 19-Feb-2016 |
Category: |
Documents |
Upload: | indra-purnama |
View: | 229 times |
Download: | 1 times |
Simulation of SIMULASIDate: 13 Nopember 2015Designer: SolidworksStudy name: Flange Kopling-pump shaftAnalysis type: Static
Table of ContentsDescription...............................................1Assumptions.............................................2Model Information.....................................2Study Properties.......................................3Units.........................................................3Material Properties...................................4Loads and Fixtures...................................4Connector Definitions...............................5Contact Information..................................5Mesh Information......................................6Sensor Details..........................................7Resultant Forces.......................................7Beams......................................................7Study Results............................................8Conclusion..............................................11
DescriptionNo Data
Analyzed with SolidWorks Simulation Simulation of SIMULASI 1
Assumptions
Model Information
Model name: SIMULASI
Current Configuration: Default
Solid BodiesDocument Name and
Reference Treated As Volumetric Properties Document Path/Date Modified
Mirror3
Solid Body
Mass:24.9878 lbVolume:96.064 in^3
Density:0.260117 lb/in^3
Weight:24.9709 lbf
D:\PEMILIHAN BANPROS\
SIMULASI.SLDPRTNov 13 14:34:36
2015
Analyzed with SolidWorks Simulation Simulation of SIMULASI 2
Study PropertiesStudy name Flange Kopling-pump shaftAnalysis type StaticMesh type Solid MeshThermal Effect: OnThermal option Include temperature loadsZero strain temperature 298 KelvinInclude fluid pressure effects from SolidWorks Flow Simulation
Off
Solver type FFEPlusInplane Effect: OffSoft Spring: OffInertial Relief: OffIncompatible bonding options AutomaticLarge displacement OffCompute free body forces OnFriction OffUse Adaptive Method: OffResult folder SolidWorks document (D:\PEMILIHAN
BANPROS)
UnitsUnit system: SI (MKS)Length/Displacement mmTemperature KelvinAngular velocity Rad/secPressure/Stress N/m^2
Analyzed with SolidWorks Simulation Simulation of SIMULASI 3
Material PropertiesModel Reference Properties Components
Name: Gray Cast IronModel type: Linear Elastic
IsotropicDefault failure
criterion:Mohr-Coulomb Stress
Tensile strength: 1.51658e+008 N/m^2
Compressive strength:
5.72165e+008 N/m^2
Elastic modulus: 6.61781e+010 N/m^2
Poisson's ratio: 0.27 Mass density: 7200 kg/m^3
Shear modulus: 5e+010 N/m^2Thermal
expansion coefficient:
1.2e-005 /Kelvin
SolidBody 1(Mirror3)(SIMULASI)
Curve Data:N/A
Analyzed with SolidWorks Simulation Simulation of SIMULASI 4
Loads and FixturesFixture name Fixture Image Fixture Details
Fixed-1
Entities: 9 face(s)Type: Fixed Geometry
Resultant ForcesComponents X Y Z Resultant
Reaction force(N) -0.226379 -0.00535533 9.00286e-005 0.226443Reaction Moment(N-
m) 0 0 0 0
Load name Load Image Load Details
Torque-1
Entities: 7 face(s)Reference: Face< 1 >
Type: Apply torqueValue: 25 N-m
Connector DefinitionsNo Data
Contact InformationNo Data
Analyzed with SolidWorks Simulation Simulation of SIMULASI 5
Mesh InformationMesh type Solid MeshMesher Used: Curvature based meshJacobian points 4 PointsMaximum element size 6.98123 mmMinimum element size 2.32705 mmMesh Quality High
Mesh Information - DetailsTotal Nodes 72491Total Elements 48784Maximum Aspect Ratio 5.6877% of elements with Aspect Ratio < 3 99.6% of elements with Aspect Ratio > 10 0% of distorted elements(Jacobian) 0Time to complete mesh(hh;mm;ss): 00:00:05Computer name: MASARI-PC
Analyzed with SolidWorks Simulation Simulation of SIMULASI 6
Sensor DetailsNo Data
Resultant ForcesReaction ForcesSelection set Units Sum X Sum Y Sum Z Resultant
Entire Model N -0.226379 -0.00535533 9.00286e-005 0.226443
Reaction MomentsSelection set Units Sum X Sum Y Sum Z Resultant
Entire Model N-m 0 0 0 0
BeamsNo Data
Analyzed with SolidWorks Simulation Simulation of SIMULASI 7
Study Results
Name Type Min MaxStress1 VON: von Mises Stress 103.376 N/m^2
Node: 1042786832.8 N/m^2Node: 288
SIMULASI-Flange Kopling-pump shaft-Stress-Stress1
Name Type Min MaxDisplacement1 URES: Resultant Displacement 0 mm
Node: 11.95114e-005 mmNode: 431
Analyzed with SolidWorks Simulation Simulation of SIMULASI 8
Name Type Min Max
SIMULASI-Flange Kopling-pump shaft-Displacement-Displacement1
Name Type Min MaxStrain1 ESTRN: Equivalent Strain 4.34825e-009
Element: 292618.50788e-007 Element: 6024
SIMULASI-Flange Kopling-pump shaft-Strain-Strain1
Analyzed with SolidWorks Simulation Simulation of SIMULASI 9
Name TypeDisplacement1{1} Deformed Shape
SIMULASI-Flange Kopling-pump shaft-Displacement-Displacement1{1}
Name Type Min MaxFactor of Safety1 Automatic 1974.52
Node: 155971.50207e+006 Node: 10192
Analyzed with SolidWorks Simulation Simulation of SIMULASI 10
Name Type Min Max
SIMULASI-Flange Kopling-pump shaft-Factor of Safety-Factor of Safety1
Conclusion
Analyzed with SolidWorks Simulation Simulation of SIMULASI 11