ALU

MIN

IUM

Handle LYNX

1

1

StopperHI-TEC

7.5

mm

11.2 mm

10

mm

12.4 mm

6 m

m

11 m

m

741

8

2

4

3

2

Tor dolny “Hide G”

do glazury

Tor dolny “Hide G”

do glazury

6 m

m

textile doorstop (inserted)14 mm x 4 mm

8

41

index 20173

38

9.5

6.5

2

Lynx SINGLE 10LINE SYSTEM/

Fastening of top track(countersink holes to

prevent protrusionof screw head)

Positioner fortop carriage FIX

upper horizontal profile

Installation of guidingcarriage Gemini Duo

to upper horizontal profile

Door filling:mirror 4 mm or

safety glass 4.5 mm+ gaskets

Door filling:10 mm board

Max. weightof 50 kgper door

screwM5x30

Installation ofguiding carriageWD 10V HI-TEC

to horizontal profile

ATTENTION:In order to drill handleholes precisely and

quickly, we recommendusing our drill jig

Track HIDE Minsert

Opening for HIDE Mshould be cut withmilling machine Ć 12 mm

Track HIDE Nsurface mounted

Track HIDE W IIto be used with carpet

Track seatHIDE Mhandle-top handle-bottom

Track HIDE Gto be used with tiles

self-tappingscrew6.3x32

COMPONENTSDEPENDENT ON FLOOR TYPE, YOU MAY

CHOOSE FROM DIFFERENT BOTTOM TRACKS

Top track SINGLE Top carriageGEMINI

Lower horizontal profile Decor (A)

Upper horizontal profile Decor (B)

Bottom carriageWD10V HI-TEC

You must remember to purchase self-tapping screwsto construct each door (4 screws per door).When using safety glass, you must also rememberto purchase gaskets.

Bottom track HIDE Minsert

Bottom track Gto be used with tiles

HIDE Bottom track W IIto be used with carpet

HIDE

Track seat MHIDEBottom track HIDE Nsurface mounted

H H HH H H

ATTENTION!Remove protective film from aluminium elements (handles, tracks, connectors, etc.) prior to cutting them to the desired size.Film removal will reveal quality issues (eg. scratches)

Dimensions of opening

HIDE N HIDE W II HIDE M HIDE G track seat HIDE M

Handle length = door height

assumed door width

board width - wb wb = w - 41 mm

board height - hb hb = h - 64 mm

w

lower horizontal profile lengthupper horizontal profile length - U

- LL = U = w - 58 mm

door height - h h = H - 35 mmTrack HIDE M, HIDE G, track seat HIDE M

door height - h h = H - 42 mmTrack HIDE W

door height - h h = H - 40 mmTrack HIDE N

door wingheight withsoft-close fitted

Track HIDE N

door wingheight withsoft-close fitted

Track HIDE W

door wingheight withsoft-close fitted

HIDE M, HIDE G

h = H - 40 mmMini SV25/40/60,

Top SV60/80,

SV-25/50

h = H - 44 mmCentral SV25/40

h = H - 42 mmMini SV25/40/60,

Top SV60/80,

SV-25/50

h = H - 46 mmCentral SV25/40

h = H - 35 mmMini SV25/40/60,

Top SV60/80,

SV-25/50

h = H - 39 mmCentral SV25/40

door filling – #10 mm board

Installation method for fitting 10 mm board (diag. A)and 4 mm mirror or glass (diag. B)

- with handle

- with upper profile

construction clearance included in thecalculation of the height of board

- with lower profile

wb

L/U

w

wm

L/U

w ATTENTION!Mirror (4 mm) should be used with a safety

backing film. Safety glass (4.5 mm) comprises

of two thin layers with a film in-between.

Both mirror and glass need fitting gaskets.

door filling - # 4 mm mirror or # 4.5 mm safety glass

mirror height - hm hm = hb

mirror width - wm wm = wb - 4 mm

Lynx SINGLE 10LINE SYSTEM/