Single Head Cutting Machine LJZ2-420 window machine sp… · JINAN DETEK MACHINE CO., LTD. T&F...

JINAN DETEK MACHINE CO., LTD. T&F 0086-531-88893513 A C1211, Sanqing Century Wealth Center, M 0086-15153199566 Chonghua Rd., High-tech Zone,Jinan,China 250101 E [email protected] 1 / 1

JINAN DETEK MACHINE CO., LTD.Single Head Cutting Machine LJZ2-420

Function

Up-cut saw for determinate angle and length cutting of PVC and aluminum profiles

Features

Largest work table, cutting ±45°¬ and 90° determinate angle accurately and conveniently

Saw blade feeding vertically with high cutting efficiency

Adopt the linear bearing system for high processing

Hydro-pneumatic blade feeding to ensure smooth cutting

Operating easily and conveniently

Reasonable design of the shield which ensure safety

Full adopt high quality electrical and pneumatic components which can pass the UL, CSA and CE

certificate, top international standard and reliable

Parameter

Input Voltage 380v 50Hz

Input Power 2.2Kw

Rotary Speed 2800r/min

Saw Blade Specification φ420×30（mm）

Air Pressure 0.5-0.8MPa

Air Consumption 30L/min

Overall Dimension 900×750×1400(mm)

Weight 500kg


JINAN DETEK MACHINE CO., LTD.Double Mitre Saw LJB2-350x3500

Function

For -45°~90°~45°plastic and aluminum profile cutting.

Features

Cutting angle stopper adjustable; can realize angle compensation.

Chop type feeding.

Flexible operation.

Parameter

Air Pressure 0.5MPa~0.8MPa


Input Voltage 380V 50Hz

Input Power 3KW

Motor Power 1.5KW

Motor Rotary Speed 2840r/min

Spindle Rotary Speed 3155r/min

Saw Blade Specification φ350mm×3.0mm×φ30mm

Max. Cutting Height 100mm

Max. Cutting Width 200mm

Cutting Length 450mm~3500mm

Overall Dimension 4000mm×1120mm×1450mm

Weight 590kg


JINAN DETEK MACHINE CO., LTD.LJZ2A-450x3600 Double Mitre Saw

Function

For 45°~90°plastic and Aluminium profile cutting.

Features

Equipped with cutting angle fine adjustment device.

Straight line feeding type; the guide for machine body and feeding system adopt linear bearing system to

ensure stable feeding and high cutting precision.

Optional: Machine head could adopt air-hydraulic damping cylinder to cut Aluminium profile.

Same shaft angle-changing structure for good surface cutting performance.

Profile supporter is available on the movable head.

Automatic cutting angle change for 45°and 90°.

One time two pieces of profile cutting (height of profile less then 60mm).

With short profile cutting device on left machine head can realize super short profile cutting.

Parameter

Air Pressure: 0.5MPa~0.8MPa


JINAN DETEK MACHINE CO., LTD.Air Consumption: 50L/min

Input Power: 5.25KW

Spindle Rotary Speed: 2800r/min

Cutting Length Range: 290mm~3600mm

Cutting Width: 120mm

Cutting Height: 120mm

Overall Dimension: 6000mm×1300mm×1650mm

Weight: 1200kg


JINAN DETEK MACHINE CO., LTD.Double Mitre Saw CNC LJZ2F-CNC-500x5000

Function

Used for PVC and aluminum profile cutting.

Features

The conversation of the angles 45°、90°is automatic.

The range of the cutting is very large, the Max. width cutting can be 320mm, or you can cutting 4 profiles

which width of the profile is below 60mm.

Have horizontal and vertical clamp system which can ensure the precision of the fix, and also can adopt

to various clamp of the profiles.

Both of the two heads of the saw have safe protection cover.

Machine guide and head feeding adopted linear bearing system.

Integrated CNC system control which have stop and can ensure high efficiency automatic.

Connect with the upper computer, download the software to make programs/data, realize

CAD/CAPP/CAM.

Connect with bar code printer which can ensure the material mark can be printed in time.

Reasonable structure of the whole machine and high processing precision which ensure the high

precision of the finished profile.


JINAN DETEK MACHINE CO., LTD.With head fine adjusting device.

High efficiency and cutting precision which can show it is the ideal processing machine for high-grade

window production.

Integrated CNC type.

Can communicate data with computer, download software and create processing programs/data, realize

CAD/CAPP/CAM.

Optional part: bar printer, print material marks on real time.

Parameter




Input Power 6.65KW

Cutting Length Range 5000mm~450mm


Saw Blade Specification 500mmx4.3mmx30mm

Overall Dimension 5850mmx1800mmx1600mm

Weight 2200kg


JINAN DETEK MACHINE CO., LTD.Double Mitre Saw LJZ2FJ-CNC-500x5000

Function

Used for PVC and aluminum profile cutting.

Features

The conversation of the angles 45°、90°is automatic.

The range of the cutting is very large, the Max. width cutting can be 320mm, or you can cutting 4 profiles

which width of the profile is below 60mm.

Have horizontal and vertical clamp system which can ensure the precision of the fix, and also can adopt

to various clamp of the profiles.

Both of the two heads of the saw have safe protection cover.

Machine guide and head feeding adopted linear bearing system.

Integrated CNC system control which have stop and can ensure high efficiency automatic.

Connect with the upper computer, download the software to make programs/data, realize

CAD/CAPP/CAM.


JINAN DETEK MACHINE CO., LTD.Connect with bar code printer which can ensure the material mark can be printed in time.

Reasonable structure of the whole machine and high processing precision which ensure the high

precision of the finished profile.

With head fine adjusting device.

High efficiency and cutting precision which can show it is the ideal processing machine for high-grade

window production.

Integrated CNC type.

Can communicate data with computer, download software and create processing programs/data, realize

CAD/CAPP/CAM.

Optional part: bar printer, print material marks on real time.

Parameter




Input Power 6.65KW

Cutting Length Range 5000mm~450mm


Saw Blade Specification 500mmx4.3mmx30mm

Overall Dimension 5850mmx1800mmx1600mm

Weight 2200kg


JINAN DETEK MACHINE CO., LTD.Glazing Bead Saw SJBW-1800

Function

For 45° glazing bead cutting.

Features

Special measurement scale, easy to operate.

One time two pieces of glass batten cutting.

Design with adjustable mould, change the profile but not change the mould, avoid reinvestment and

reduce the production preparation period.

Adjustable positioning plate design with fine tuning device so that made the interior corner sealed after

assembling the bead.

Parameter



Input Power 1.1KW


Cutting Height 33mm

Cutting Width 100mm



Weight 250kg


JINAN DETEK MACHINE CO., LTD.Glazing Bead Saw (Table type) SJBT-1800

Function

For 45° glass batten cutting.

Features

Special measuring worktable with the glazing bead measurement , positioning one time, the bead can be

swiftly cut, easy operation and high acccuracy.

One time two pieces of glass batten cutting.

Design with adjustable mould, change the profile but not change the mould, avoid reinvestment and

reduce the production preparation period.



Parameter




Input Power 1.1KW


Cutting Height 33mm


JINAN DETEK MACHINE CO., LTD.Cutting Width 100mm



Weight 450kg


JINAN DETEK MACHINE CO., LTD.Glazing Bead Saw CNC SYJ-CNC-1800

Function

For 45° glazing bead cutting.

Features

Special CNC Measurment Scale, easy to operate

Various dimension can be importe, increase the efficiency

Can cut two pieces one time, high efficiency

Design with adjustable mould reduce the production preparation period



With the profile supporter, easy to operate, can deposit excess material.

Parameter



Input Power 1.1KW


Cutting Height 31mm



Weight 350kg


JINAN DETEK MACHINE CO., LTD.Mullion Cutting Saw SJVA-55

Function

Used for V-shaped mullion cutting.

Features

Two saw blade with 90° layout, one time two V shape cutting, high cutting precision and efficiency.

Horizontal structure and stable running for high cutting precision.

Patent technology to prevent collapse during cutting procedure.

Waste profile only produced in saw estuary, high utilization.

Parameter




Input Power 3KW


Cutting Height 110mm

Cutting Width 120mm



Weight 300kg


JINAN DETEK MACHINE CO., LTD.V Cutting Saw LJVW-60

Function

For 90° V-shaped groove cutting

Features

Pneumatic driving, easy to operating

Parameter

Air Pressure 0.5～0.8(MPa)

Air Consumption 10(L/min)

Input Voltage 3N～50Hz 380/220V

Input Power 1.5(Kw)

Spindle Rotary Speed 2800(r/min)

Cutting Height 20～60(mm)

Cutting Width 120(mm)

Cutting Length 300～1600(mm)

Overall Dimension 1800×1380×1300（mm）

Weight 220(kg)


JINAN DETEK MACHINE CO., LTD.Single Head Welding Machine SH01

Function

30°~180° welding available.

Features

Especially for arc window and special angle window welding;

PLC control welding program, high reliability.

Parameter


Air consumption: 50L/Min

Input Voltage : 220V, 50Hz

Input Power: 1.5KW

Welding Height: 25mm~120mm

Max. Welding Width: 230mm

Overall Dimension: 960mm*900mm*1460mm

Weight: 260kg


JINAN DETEK MACHINE CO., LTD.Two Head Welding Machine SHZ2-120X3500

Function

Used for corner and mullion welding of PVC profile.

Features

Two head can work separately or corporately, flexible combination.

PLC controls the welding action / program, high reliability.

Free angle welding of right machine head.

Parameters can be set to meet various profiles processing requirements.

High welding precision.

Adopt high quality electrical and pneumatically components with high reliability.

Good welding corner appearance.

Parameter


Air Consumption: 40L/min

Input Voltage: 220V 50Hz

Input Power: 2.5KW


Welding Width: 120mm

Welding Range: 400mm×400mm~3500mm×3500mm


Weight: 850kg


JINAN DETEK MACHINE CO., LTD.Two Head Welding Machine SHZ2B-165X3500

Function

Used for top grade white profile and color profile welding.

Features

The two head can work separately or corporately to make the welding.

2mm general welding and 0.2mm color profile seamless welding, is available and can be adjusted

manually.

Super large welding function in the right head.

The two head adopt strong rigidity design which can ensure long time work stability.

The lathe bed and the heads adopt guide linear bearings, high precision.

Can install special fixture of the welding to increase welding strength and beautify the surface of the

welding.

It has the clamp limit system, and should be operated by two hands to ensure the safety of the operator.

Adopt high quality electrical and pneumatic element, which can ensure the long time stability.

Parameter



Input Power 4.4KW

Welding Height 20mm~120mm

Welding Width 165mm

Welding Range 430mm~3500mm


Weight 1300kg


JINAN DETEK MACHINE CO., LTD.Two Head Seamless Welding Machine SHZ2HA-260x4000

Function

Used for seamless welding for PVC color profile, and automatically realize the weld seam cleaning of

upper and lower sides after welding.

Features

It can be realized 0.2mm welding of colored PVC profile, and automatically clean the upper and lower

sides after welding. That is ideally complete the cleaning of upper and lower in cleaning process.

Less than a minute for profile welding and cleaning, increase the efficiency.

All motion pair adopted linear bearing guide system, increases processing precision, ensure the

reliability and stability of the machine.

The max. welding height reach to 260mm, and two pieces profiles welding (less than 120mm) at one

time is available by change the double layer profile fixture.

Adjustable positioning distance, heating distance and feeding distance, ensures the optimal welding

quality.

Special profile fixture can be installed, which improves the appearance of welding products, welding

strength increased by 20%.

Special Know-How technique which produces very high quality color PVC windows and doors.


JINAN DETEK MACHINE CO., LTD.

Parameter



Input Power 3.5KW

Welding Height 260mm

Welding Width 100mm



Weight 760kg


JINAN DETEK MACHINE CO., LTD.Three Head Welding Machine SHZ3-120X3500

Function


Features

Three head can work separately or corporately, flexible combination.







Parameter



Input Power 3.5KW


Welding Width 120mm

Welding Range 400mm×400mm~3500mm×3500mm


Weight 1080kg


JINAN DETEK MACHINE CO., LTD.Three Head Welding Machine SHZBV3

Features

The most advanced machine type in Europe.

It can be realized automatic conversion from 0.2mm to 2mm.

Round guide linear motion pare, square guide linear motion pare, small fit clearance; Good rigidity of

whole machine; Precise parts and strictly assembling process, high stability.

Cylinders, solenoid valves, PLC and low-voltage electric components and pneumatic components etc

are all selected strictly, which ensures high reliability.

Equipped with quick change device, back position plate with pheumatic feeding structure, realizes corner

and V-notch welding quick change, easy operation and practice.

Rigid grasp structure is adopted to the profile positioning system, which could strictly guarantee welding

loss and high welding accuracy.

Heating-in position timing control, strict conforming with the European standard, ensured high welding

corner strength and small fluctuation range.

Two-step clamping design and emergency stop-pressure release function, conforming with CE standard,

ensures high safety.

Especially suitable for high-grade and complex windows manufacturing.

Parameter



Input Power 8KW


Max. Welding Width 120mm



Weight 2500kg




JINAN DETEK MACHINE CO., LTD.Four Head Welding Machine SHZBV4

Features

The most advanced machine type in Europe.

It can be realized automatic conversion from 0.2mm to 2mm.

Round guide linear motion pare, square guide linear motion pare, small fit clearance; Good rigidity of

whole machine; Precise parts and strictly assembling process, high stability.







Heating-in position timing control, strict conforming with the European standard, ensured high welding


Two-step clamping design and emergency stop-pressure release function, conforming with CE standard,

ensures high safety.

Especially suitable for high-grade and complex windows manufacturing.

Parameter




Input Power 10KW


Max. Welding Width 120mm



Weight 2700kg




JINAN DETEK MACHINE CO., LTD.Four Head Welding Machine SHZ4-120×4500

Function


Features

Four head can work separately or corporately, flexible combination.







Parameter



Input Voltage 220V 50Hz

Input Power 4.5KW


Welding Width 120mm



Weight 1550kg


JINAN DETEK MACHINE CO., LTD.Four Head Welding Machine SHZ4G-120×4500

Function

Used for corner and mullion seamless welding of PVC profile.

Features

Four head can work separately or corporately, flexible combination.







2mm general welding and 0.2mm color profile seamless welding, isavailable and can be adjuested

manually.

Parameter



Input Voltage 220V 50Hz

Input Power 4.5KW


Welding Width 120mm



Weight 1550kg




JINAN DETEK MACHINE CO., LTD.Four Head Welding Machine SHZ4GC-120×4500

Function

Used for white and color profile welding, achieve following type welding: ┏,┳,╋,┳┳,┳┳┳,┳┳┳┳ ,

┏┳┓ ,┏┳┳,┏┳┳┓,┏┓,┏┓┏┓. The profiles are inserted and clamped into the machine by the

operator in a fixed sequence. The welding operation then follows automatically when the operator

presses the automatic running button.

Features

2mm general welding and 0.2mm color profile seamless welding, is available and can be adjusted

manually.

Round guide linear bearing, precise parts and strictly assembling process, high stability.







Heating-in position timing control, strict conforming with the European standard, ensures high welding


Keep good appearance quality when welding color profile.

Especially suitable for high-grade windows manufacturing.

Parameter



Input Voltage: 380V 50Hz

Input Power: 4KW


Max. Welding Width: 120mm

Welding Range: 400mm~4300mm


Weight: 2000kg


JINAN DETEK MACHINE CO., LTD.Auto Water Slot Milling Machine LXCA-60

Function

Milling all kinds of water slots and air pressure balance grooves.

Features

Full design with high rigidity, processing beautiful water slot, high appearance quality.

Automatic cutter changer on the under head, one time clamp, two end water slots processing.

High efficiency, suitable for mass production.

Special feeding system, need no special maintenance, high milling quality.

Convenient adjustment for the cutter location to meet different kinds of profiles.

Water slot milling length adjustable within 100mm, wide adaptability.

Adopt linear bearing motion to ensure the processing precision.

Parameter



Input Power 1.14KW

Main-shaft Revolution 25000r/min

Cutter Diameter φ5mm φ8mm

Slot Length 0~100mm


Weight 300kg


JINAN DETEK MACHINE CO., LTD.Two Head Auto Water Slot Milling Machine LXCZ2A

Function

Milling all kinds of water slots and air pressure balance grooves.

Features

Two three-axis milling heads layout along the machine guide, design with high rigidity, high processing

quality.

One time clamp, two end water slots processing.

High efficiency, suitable for mass production.

Special feeding system, need no special maintenance, high milling quality.

Convenient adjustment for the cutter location to meet different kinds of profiles.

Water slot milling length adjustable within 100mm, wide adaptability.

Adopt linear bearing motion to ensure the processing precision.

Parameter




Input Power 2.28KW




JINAN DETEK MACHINE CO., LTD.Max. Slot Depth 30mm

Slot Length 0mm~100mm


Weight 900kg


JINAN DETEK MACHINE CO., LTD.Lock Hole Milling Machine SZSB-100

Function

Milling all kinds of lock holes.

Features

Formed by three-hole drill part (horizontal direction) and copy milling part (vertical direction).

The height of three-hole drilling can be adjusted easily.

Three-hole drill designed behind and operated easily.

Adopt vertical axis to ensure the parallel precision of the three-hole drill.

Adopt hydro-pneumatic actuator cylinder feeding to save labor.(SZSA-100)

Easy adjustment of the processing position.

Parameter



Input Power: 1.1KW, 0.75KW

Three-hole Cutter Diameter: φ12mm φ10mm

Copy Cutter Diameter: φ5mm φ8mm

Copy Milling Range: 290mm×90mm(length×width)


Weight: 400kg


JINAN DETEK MACHINE CO., LTD.Auto End Milling Machine LXDW-200

Function

For mullion end surface milling with different sections, suitable for screwing connection type mullion.

Features

Pneumatic feeding.

Changeable cutters for various profiles processing.

Parameter



Input Power 1.5KW


Locating Board Rotate Angle -55°~+55°

Max. Processing Dimension 200mm×45mm×90mm

Cutter Spindle Travel Range 36mm


Weight 240kg


JINAN DETEK MACHINE CO., LTD.Single Head Copy Routing Machine LXF-290×90

Function

For all kinds of hole and groove milling.

Features

Belt for speed increase, high speed milling, good milling quality.

Template changable for different hole and grooves.

A vertical direction of the milling head can processing the holes and grooves on the level.

Parameter




Input Power 0.75KW


Copy Range 90mm×290mm



Weight 220kg


JINAN DETEK MACHINE CO., LTD.Bending Machine SYH01-1800

Function

Special window machine for bending PVC profile to produce arch windows.

Features

Mainly composed of curve forming worktable and heating oil tank.

Electrical Oil heating to heat up the profile.

Any processing radian within the diameter 650~1800mm.

Reliable performance, safety operation and high efficiency.

Bending jigs made according to the profile section and chambers.

Parameter


Input Power 12KW

Heating Oil Tank 0.2cbm

Bending Diameter Range 500mm~1800mm

Heating Temperature 90centigrade~130 centigrade

Overall Dimension 4500mm*2900mm*800mm

Weight 580kg


JINAN DETEK MACHINE CO., LTD.Corner Cleaning Machine SQJA-CNC-120

Function

For profile welding seam cleaning.

Features

Two axis computer control system.

Imported servo motor drive system, computer control system, solenoid valve, air source disposer and

so on, ensured reliable performance and long using life.

Horizontal inward clamping system ensures the precision of the corner cleaning.

Clean outside vertical surface, up/bottom welding seam and seal rubber groove part, and also can

process the lock slot of lift sash for American profile once time.

Can store many programs for various profile processing.

Circular interpolation and line interpolation function to ensure the good cleaning result.

Can customize different knives according to differernt profile section for meeting different clean

requirement.


JINAN DETEK MACHINE CO., LTD.Parameter




Input Power 1.4KW

Main Cutter Revolution 2880r/min

Profile Height 30mm~120mm

Profile Width 20mm~120mm


Weight 500kg


JINAN DETEK MACHINE CO., LTD.V-notch Cleaning Machine SQVB-120

Function

To clean V-notch welding seam.

Features

Unique structural design, easy to adjust, accurate centralization.

Accurate positioning, reliable clamping and good cleaning effect.

Cleaning cutter unit could adjust according to the profile height and simple operation.

It can clean welding-seam separately and also cooperately.

Parameter




Input Power 100W

Processing Height 30mm~120mm

Processing Width 25mm~120mm

Min.Finished Window Size A ≥375 mm

Min.Finished Window Size B ≥450 mm

Overal Dimension 2240mm×980mm×1620mm

Weight 150kg


JINAN DETEK MACHINE CO., LTD.Portable Surface Cleaning Tool SQ-120

Function

For┏ shaped or ┳ shaped corner cleaning.

Features

Pneumatic drive.

Precise positioning, compact structure and easy operation.

Parameter



Processing Width 30mm~120mm


Weight 4.8kg


JINAN DETEK MACHINE CO., LTD.Internal Cleaning Tool SXN

Function

For internal corner cleaning.

Features

Pneumatic drive, adopt imported air grinder, along with filter.


Parameter




Weight 0.9kg


JINAN DETEK MACHINE CO., LTD.External Cleaning Tool SXW

Function

For external corner cleaning.

Features

Pneumatic drive, adopt imported air grinder, along with filter.


Parameter




Weight 1.15kg

Date post:	04-Jul-2020
Category:	Documents
Upload:	others
View:	0 times
Download:	0 times

Single Head Cutting Machine LJZ2-420 window machine sp… · JINAN DETEK MACHINE CO., LTD. T&F...

Documents