– SINGLE-HUNG - Min 1 6 2 0 Max 4 0 7 6 – DOUBLE SINGLE-HUNG - Min 3 0 2 6 Max 8 0 7 0 – TRIPLE SINGLE-HUNG - Min 4 6 2 6 Max 9 0 7 0 Minimum egress is 3 0 5 0 with a 30” bar set or 2 6 6 0 with a 36” bar set. SH vent set: 12”, 15”, 18”, 21”, 24”, 27”, 30”, 33” or 36” NOTE: For engineering approval contact your Milgard representative for any configuration over 40 square feet. Each Milgard Manufacturing plant reserves the right to alter or change sizes and configurations according to location capabilities. Ask your Milgard rep about specialty applications. Windows over 40 square feet shipped open for field glazing. Varies by location. 8220M-1 NOVEMBER 2008 Single Hung Windows Montecito ™ New Construction Window Single-Hung Double Single-Hung Gable Top Single-Hung Double Single-Hung/Center Lite Triple Single-Hung
Transcript
– SINGLE-HUNG- Min 1620 Max 4076
– DOUBLE SINGLE-HUNG- Min 3026 Max 8070
– TRIPLE SINGLE-HUNG- Min 4626 Max 9070
Minimum egress is 3050 with a 30” bar set or2660 with a 36” bar set.
SH vent set: 12”, 15”, 18”, 21”, 24”, 27”, 30”, 33” or 36”
NOTE: For engineering approval contact your Milgard representative for anyconfiguration over 40 square feet. Each Milgard Manufacturing plant reservesthe right to alter or change sizes and configurations according to locationcapabilities. Ask your Milgard rep about specialty applications.
Windows over 40 square feet shipped open for field glazing.Varies by location.
8220M-1NOVEMBER 2008
Single Hung WindowsMontecito™ New Construction Window
Single-Hung Double Single-Hung
Gable Top Single-Hung
Double Single-Hung/Center Lite
Triple Single-Hung
The Montecito series vinyl Single Hung windowoffers the outstanding insulating properties, lowmaintenance, and contemporary aesthetic appealonly vinyl can provide. Available in white or tanhomogenous window frames, Montecito’s durablevinyl exterior will never need painting. The windows will maintain their color and shape and can be constructed to your exact size specifications, subject to engineering review. All Milgard windows are made to order at noadditional charge.
Like all Milgard windows, patio doors and sky-lights, the Montecito series carries a Full LifetimeWarranty to the original single family homeownercovering both materials and labor. The MilgardFull Lifetime Warranty is fully transferable unlim-ited up to 10 years. For more information, locateour simple one-page warranty on milgard.com.
Commercial, apartment, multi-family, and co-housing projects are covered by a 10-year warranty from date of manufacture, covering allmaterials and labor, including the glazing unit.
8220M-2 NOVEMBER 2008
Single Hung WindowsMontecito™ New Construction Window
CONFIGURATIONS
Vertical sliding windows can be used alone or in combination withother vertical sliding windows, and radius, gable or picture win-dows for vent below and vent above configurations.
COMPONENTS
FRAMEMontecito is available in a variety of frame and trim choices. The 3-1/4” deep nail on frame is ideal for both New Construction andReplacement installations. We offer a standard nail fin frame forNew Construction, and a block frame with nail fin removed forinsert replacement, welded into the frame, for stucco exteriorReplacement applications.
Frame components are made of a high performance uPVC, rigidpolyvinyl chloride material, custom compounded for superior impactresistance, color retention and weather resistance. The frame andsash corners are all precision mitered and fusion welded for a life-time of air and water resistance.
The Montecito product line meets or exceeds theAAMA/WDMA/CSA 101/I.S.2/A 440-05 Industry Specification forWindows and Doors. They are also tested for Forced EntryResistance to the ASTM F588-97 standard, Grade 20 level. Eachwindow is labeled with the NFRC Energy Star performance informa-tion, based on the type of glazing you select.
AVAILABLE FRAME STYLES*
8220M 1-3/8” Nail Fin Setback8230M 1” Nail Fin Setback with Stucco Key
8240M 1-3/8” Nail Fin Setback, 2” Long Nail Fin8240M 1-3/8” Nail Fin Setback, 2” Long Nail Fin
with Optional:3/4” Flat J-Channel1” Contoured J-Channel2” Brickmold-style J-Channel
*Not all frame styles available at all Milgard locations.Contact your sales representative for more information.
NAIL-ON FIN(1-1/4” OR 2” FIN WIDTHS AVAILABLE)A pre-punched nail flange extends around the perimeter frame,securing the window in rough openings and acting as a part of theflashing system.
FIN SETBACKS ARE AVAILABLE IN:1-3/8” nail fin setback (1-1/4” or 2” pre-punched nail flange)1” nail fin setback with stucco key (1-1/4” pre-punched nail flange)The 2” pre-punched nail flange frame also has an exterior accessorygroove which allows for optional J-channel trim:
2” Brickmold1” Contour3/4” Flat
The 2” brickmold is sent separately to the field with the window,and snapped in-place after window installation. The 1” contour and3/4” flat options are welded in place at the factory. All trim optionsare extruded by Milgard and are available in white and tan.
WEEP SYSTEMHollow sill construction and offset weep baffles release any accumu-lated moisture from the sill pockets and help prevent blow back,and helps control the water flow caused by a combination of windand rain.
GLAZING MATERIALAAMA-approved glazing tape adheres glass to the fixed and ventpanel frames which seals and cushions the glass. Rigid vinyl settingblocks are used to support the unit above the sill, preventing glassshear (glass in the insulated unit becomes offset).
Extruded vinyl glazing (snap-in) bead is applied around the interioredge. “Interior glazing” makes replacement of glazing unit conven-ient; bead is mitered at 45 degree for a finished look. Insulated dualglazed panes have a 7/8" over all glass thickness and are dual sealedequivalent for optimal energy efficiency. All Tuscany™ windows cur-rently meet or exceed EnergyStar® performance in all climate zoneswith a 0.35 u-factor or lower. Specialty glass options are availableupon request which can help achieve as much as a 26% improve-ment in u-factor. Specialty glass options for privacy, noise abate-ment and aesthetics are available upon request.
VENT PANELThe vent panel has an "L" shaped lip that fully interlocks with thehorizontal meeting rail, adding security and preventing air andwater penetration. The vent panel operates on concealed block andtackle balancers, allowing the vent to remain open in any position.The balancer is installed in the jamb on each side of the windowand is easily removed for replacement.
The Montecito™ Series has been designed with equal sightlinesresulting in the same size glazing unit for both the fixed and ventpanels. This is not only visually appealing but offers simplifiedfield maintenance and can often result in common-sized windowscreens for window systems of more than two units.
8220M-3NOVEMBER 2008
Single Hung WindowsMontecito™ New Construction Window
WEATHERSTRIPPINGSilicone-treated water-repellent polypropylene fin seal weatherstrip-ping provides a durable, weather tight seal. The weatherstripping isinstalled in an integral, continuous keyway around 3-sides of thevent and on the fixed interlock.
LOCKING ASSEMBLYMilgard’s exclusive patent-pending SmartTouch™ direct action lockmechanism provides security and finger-tip operation. The lockengages when the window is closed. The lock offers a visual indicatorthat when the window is closed, it is also locked. The SmartTouch™lock is unlike most locking mechanisms available today as it requiresno squeezing or twisting to operate, making it ideal in designs for theaging in place.
SCREENMilgard's exclusive PureView™ screen frames are cambered alu-minum, assembled with rigid nylon corner clips. Screens come stan-dard with matching frame color. Optional finger pull rail on screenfor easy removal. PureView's innovative screen uses smaller diameteryarn, improving the interior view. The finer mesh also reduces theappearance of a screen, enhancing curb appeal. PureView's fiberglasscharcoal screen mesh is strong, durable and easy to replace. Allscreens are under one year warranty.
ENERGY PACKAGESMilgard offers two energy efficiency upgrade packages that offerincreased U-Value performance. 3D™ and 3D MAX™ use the ENER-GY STAR® criteria from each climate zone and utilize materials thatare tailored to each individual climate to increase energy efficiency.The combination of the frame material, product design and glazingunit make up the 3 components of the energy packages. TheMontecito Series receives up to 23% increase in energy efficiencywith the 3D MAX package.
Note:• Packages available in most markets.
Please see your local sales representative for details.• 3D and 3D MAX energy packages are based on insulated glass units with
Single Strength (3/32") and Double Strength (1/8") glass. Some glass thickness-es and internal grid combinations may result in lower energy performance.
• 3D and 3D MAX energy packages are not included with the 8125 DoubleSlider, 5621WS Wide Stile Sliding Door, 8225 Double Hung when selectinggrids and are currently not available in breather tube applications.
OPTIONS
GRIDSAvailable in 5/8” flat or 1-1/16” sculptured aluminum profiles. Color-matched to frame. Simulated divided lite (SDL) grids are also availablein some locations, using 5/8” grids between the glass panes for three-
dimensional shadowing as well as 7/8” contoured vinyl grid applied tothe interior and exterior glass panes.
All grids are color matched to frame in white or tan.
GLASSPlease refer to glass section.
Many more options are available. Please check with your MilgardRepresentative.
TEST STANDARDSSee Test Reports/Energy Ratings section.
Caution: The use of petroleum based fuels or solvents as release agents instucco wall installations or glass cleaning will chemically attack materials usedin seals and other components, and voids the Milgard Warranty. The use of waxbased release agents is recommended.
Expanding foam for insulation purposes should not be used. Backer rod or loosepacked fiberglass bat insulation is recommended.
Single Hung WindowsMontecito™ New Construction Window
