+ All Categories
Home > Documents > SINGLE SOURCE SUPPLIER FOR BUILDING PRODUCTS · 2019. 7. 16. · single source supplier for...

SINGLE SOURCE SUPPLIER FOR BUILDING PRODUCTS · 2019. 7. 16. · single source supplier for...

Date post: 08-Aug-2021
Category:
Upload: others
View: 1 times
Download: 0 times
Share this document with a friend
52
SINGLE SOURCE SUPPLIER FOR BUILDING PRODUCTS TECHNICAL SUPPORT 1 (800) SE-SPECS [737-7327]
Transcript
Page 1: SINGLE SOURCE SUPPLIER FOR BUILDING PRODUCTS · 2019. 7. 16. · single source supplier for building products technical support 1 (800) se-specs [737-7327]

SINGLE SOURCE SUPPLIER

FOR BUILDING PRODUCTS

TECHNICAL SUPPORT1 (800) SE-SPECS [737-7327]

Page 2: SINGLE SOURCE SUPPLIER FOR BUILDING PRODUCTS · 2019. 7. 16. · single source supplier for building products technical support 1 (800) se-specs [737-7327]

QUALITY ASSURANCEGood sheet metal practice demands that trim & flashing products be accurate and consistently manufactured to precision tolerances. We are committed to the highest in total product quality by employing the latest in roll forming technology; producing products as efficiently as possible.

REFERENCE MATERIAL

COMPANY HISTORYFor more than 40 years, Southeastern Metals Manufacturing Company has been a trusted industry leader, providing superior quality architectural sheet metal components to building professionals, and to the do-it-yourselfer. From top to bottom, the comprehensive range of products offered within a single source, assures you the unlimited creative flexibility to accomplish any job on time, and within budget.

LOCATIONSStrategically located manufacturing and warehouse locations.

Our distribution network assures that when you specify and order Southeastern Metals products that they will make it to your jobsite promptly. See back cover for locations.

MATERIALSGALVANIZED· Economical· May be used in direct contact with concrete or masonry· Durable long term performance· Caution: do not use in conjunction with copper or pressure treated lumber All galvanized steel products are zinc coated as specified by ASTM-A-653, Federal specification AA-S-775 E.

ALUMINUM· Lightweight & highly corrosion resistant · Will not stain adjacent surfaces· Easily fabricated · Avoid direct contact with dissimilar metal and with concrete or mortar

All aluminum products are as specified by ASTM B-209Federal specification QQ-A-250 E.

FINISHAll bare 26 gauge galvanized products have a zinc coating of G-90 for corrosion resistance.

All painted products have a gloss polyester color coating over primer.

CUSTOM PRODUCTSSoutheastern Metals manufactures a full line of typical products, unusual needs may require custom trim components. Our customer service/technical assistance staff can work from your sketch, or provide a detail drawing. Upon customer approval your custom component(s) can be fabricated, packaged, and shipped, generally within 5 working days.

2 in 12 1.014 1.424 3 in 12 1.031 1.436 4 in 12 1.054 1.453 5 in 12 1.083 1.474 6 in 12 1.118 1.500 7 in 12 1.158 1.530 8 in 12 1.202 1.564 9 in 12 1.250 1.600 10 in 12 1.302 1.641 11 in 12 1.357 1.685 12 in 12 1.413 1.732

Rise & RunMultiply Flat

Area by

LF of Hips orValleys per LF of

Common Run

ThicknessInchesGauge

No. Dec.Equiv.

Toler.Range

ApproxLbs. Per

sq.ft.

AISI THICKNESS TOL. RANGE ALUMINUM SHEET

20 .0320 .451

22 .0253 .352

24 .0201 .282

26 .0159 .224

28 .0126 .177

29 .0113 .159

30 .0100 .141

ST .0145 .208

EC .0085 .123

.0365

.0305

.0284

.0224

.0234

.0173

.0183

.0123

.0132

.0119

.0122

.0112

.0115

.0095

.0180

.0140

.0085

.0078

AISI THICKNESS TOL. RANGE GALVANIZED STEEL SHEET

ThicknessInchesGauge

No. Dec.Equiv.

Toler.Range

ApproxLbs. Per

sq.ft.

20 .0396 1.656

22 .0336 1.405

24 .0276 1.154

26 .0217 .907

28 .0187 .782

29 .0172 .719

30 .0157 .657

ST .0120 .507

HT .0100 .408

.0436

.0356

.0376

.0296

.0316

.0236

.0247

.0179

.0217

.0157

.0202

.0142

.0187

.0127

.0125

.0118

.0115

.0098

Note: That nonferrous gauges (aluminum) are not the same as ferrous gauges (steel)!

GENERAL INFORMATION

US Standard steel and aluminum gauge decimal thickness table.

Roof slope conversion table with roof pitch length multiplier.

Page 3: SINGLE SOURCE SUPPLIER FOR BUILDING PRODUCTS · 2019. 7. 16. · single source supplier for building products technical support 1 (800) se-specs [737-7327]

TABLE OF CONTENTS

Aluminum Plywood Clip. . . . . . . . . . . . . . . . . . . . . . 37Galvanized Plywood Clip . . . . . . . . . . . . . . . . . . . . . 37Insulation Support Wire . . . . . . . . . . . . . . . . . . . . . . 37

Cornerite Inside Corner (Lath Accessories) . . . . . . . 38Expanded Corner Bead (Lath Accessories). . . . . . . . 38Casing Bead (Lath Accessories.) . . . . . . . . . . . . . . . 38Corner Bead (Vinyl Lath Accessories) . . . . . . . . . . . 39Expansion Joint (Vinyl Lath Accessories) . . . . . . . . . 39Casing Bead (Vinyl Lath Access.). . . . . . . . . . . . . . . 40KAL-Korner Bead. . . . . . . . . . . . . . . . . . . . . . . . . . . 40

Drywall Studs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41Drywall Track . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42Furring Channel . . . . . . . . . . . . . . . . . . . . . . . . . . . 42

Can Stock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43Mobile Home Skirting . . . . . . . . . . . . . . . . . . . . . . . 43Flat Sheets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44

Aluminum Storm Panels . . . . . . . . . . . . . . . . . . . . . 45

INDEX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46

HVAC TRIM & SHEET METAL PRODUCTS

STORM PANEL PRODUCTS

VENTILATION PRODUCTS

Code Approval/Description Page . . . . . . . . . . . . . . . . 15V -Crimp Metal Roofing Panels . . . . . . . . . . . . . . . . 2Residential Full Line Trims & Accessories . . . . . . . . . 2 PBR & R Panel Metal Roofing Panels . . . . . . . . . . . . . 3SM-Rib Metal Roofing Panels. . . . . . . . . . . . . . . . . . . 3Verti-Lok Metal Roofing Panels . . . . . . . . . . . . . . . . . 4Commercial Full Line Trims & Accessories. . . . . . . . . 4Sem-Lok Metal Roofing Panels . . . . . . . . . . . . . . . . . 5Rock-Lok. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5Corrugated Metal Roofing Panels. . . . . . . . . . . . . . . . 6

Angle Flashing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7Step Flashing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8Eave Drip-Galvanized Steel . . . . . . . . . . . . . . . . . . . . 9Eave Drip-Aluminum . . . . . . . . . . . . . . . . . . . . . . . . 10Roof Edge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11Apron/Dormer Flashing . . . . . . . . . . . . . . . . . . . . . . 12Stucco Flashing . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12Tin Caps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12Ridge Roll-Galvanized . . . . . . . . . . . . . . . . . . . . . . . 13Water Diverter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13Z Flashing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14VALLEY PRODUCTSPreformed Valley . . . . . . . . . . . . . . . . . . . . . . . . . . . 15V Formed Valley . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15V Formed Valley Hemmed . . . . . . . . . . . . . . . . . . . . 15Preformed Valley Hemmed. . . . . . . . . . . . . . . . . . . . 16Preformed Tile Valley 24” Open Angle . . . . . . . . . . . 16Valley Rolled . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Fascia Trim . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18Lap Siding Starter Strip . . . . . . . . . . . . . . . . . . . . . . 18H Molding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19Soffit J Channel . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19Soffit System. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Static Ventilators . . . . . . . . . . . . . . . . . . . . . . . . . . . 20Turbine Ventilators . . . . . . . . . . . . . . . . . . . . . . . . . . 20Aluminum Soffit-Strip . . . . . . . . . . . . . . . . . . . . . . . 21Venturi Vent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21Universal Ridge Vent Aluminum . . . . . . . . . . . . . . . . 22Aluminum Under-Eave Louver . . . . . . . . . . . . . . . . . 23Foundation Vents . . . . . . . . . . . . . . . . . . . . . . . . . . . 23Weather Vent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24Gooseneck Vent . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25Galvanized Roof Jack. . . . . . . . . . . . . . . . . . . . . . . . 26Galvanized Shanty Cap . . . . . . . . . . . . . . . . . . . . . . 26

Rod Chairs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27Tie Wire . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27Anchor Bolts & Washers . . . . . . . . . . . . . . . . . . . . . 28Bar Ties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29Pier Caps. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29Bar Tie Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30Cavity Caps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30Rebar Safety Caps . . . . . . . . . . . . . . . . . . . . . . . . . . 30Rebar. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31Termite Shield . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32Wall Tie . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32Dovetail Anchor . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

Arched Corner Bead. . . . . . . . . . . . . . . . . . . . . . . . . 34Bullnose Corner Bead . . . . . . . . . . . . . . . . . . . . . . . 34Drywall Corner Bead . . . . . . . . . . . . . . . . . . . . . . . . 35J Bead. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35Galvanized Bullnose Corner Bead . . . . . . . . . . . . . . 36Vinyl Corner Bead . . . . . . . . . . . . . . . . . . . . . . . . . . 36L Bead. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

METAL ROOFING PRODUCTS

CONCRETE & MASONRY PRODUCTS

BUILDER HARDWARE PRODUCTS

STUCCO & PLASTER LATH PRODUCTS

DRYWALL CORNER BEAD PRODUCTS

FLASHING & EXTERIOR TRIM PRODUCTS

FASCIA & SOFFIT PRODUCTS

METAL FRAMING PRODUCTS

VENTILATIONPRODUCTS

Page 4: SINGLE SOURCE SUPPLIER FOR BUILDING PRODUCTS · 2019. 7. 16. · single source supplier for building products technical support 1 (800) se-specs [737-7327]

ME

TAL

RO

OF

ING

PR

OD

UC

TS

1

METAL ROOFINGA complete line of roof, wall & fascia panel systems for residential, agricultural, commercial & industrial applications.

7 Panel Profiles plus Flat Sheets

Multiple Gauges

More Attractive & Lasts Longer than Conventional Roofing

Cost Effective & Energy Efficient

Reduces Insurance Premiums

Metro Dade and UL Listings

High Wind and Hurricane Zone Ratings

Fire Resistant

100% Recyclable

Low Maintenance

Technical Assistance

Superior Warranties

Full Line of Color MatchedAccessories & Trims

Special Order Colors Available

Page 5: SINGLE SOURCE SUPPLIER FOR BUILDING PRODUCTS · 2019. 7. 16. · single source supplier for building products technical support 1 (800) se-specs [737-7327]

METAL ROOFING PRODUCTSM

ETA

L R

OO

FIN

G P

RO

DU

CT

S

2

5-V CRIMPDesign Features: Architectural exposed fastener panel.

• 24” width coverage

• Anti-siphon channel side lap design

• 7/16” height inverted V(s)

• Minimum roof slope 3/12 pitch

• Utility, 29, 26 and 24 gauge

Material: Galvanized Steel, Galvalume, SemCoat & SemCoat Plus

METAL ROOFING PANELS [DETAILED INSTALLATION GUIDES AVAILABLE]

1 Ridge/Peak

2 Ridge/Hip

3 Vented Ridge

4 Eave Flashing

9 Endwall

10 J-Channel

11 Pipeboot

5 Eave Drip

6 Gable/Rake

7 Preformed Valley

8 Sidewall

Universal Closure

Butyl Tape Sealant Tape Touch-up Paint

Gambrell Flashing

Hex HeadWoodfast Screws

5V-Crimp Inside Closure 5V-Crimp Outside Closure

Page 6: SINGLE SOURCE SUPPLIER FOR BUILDING PRODUCTS · 2019. 7. 16. · single source supplier for building products technical support 1 (800) se-specs [737-7327]

ME

TAL

RO

OF

ING

PR

OD

UC

TS

3 4

SM-RIBDesign Features: Architectural exposed fastener panel.

• 36” width coverage (roofing or siding)

• 9” on center spacing major ribs with 2 equally spaced stiffening ribs between major ribs

• 3/4” major rib height

• 29 and 26 gauge

• 26 gauge Metro-Dade County approved

• Minimum roof slope 3/12 pitch

Material: Galvanized Steel, Galvalume, SemCoat

PBR & R PANELSDesign Features: Architectural exposed fastener panel.

• 36” width coverage roofing (PBR) or siding (R-Panel)

• 12” on center spacing major ribs with 2 equally spaced stiffening ribs between major ribs

• 1-1/8” major rib height

• 29 & 26 gauge

• Minimum roof slope 1/12 pitch

Material: Galvanized Steel, Galvalume, SemCoat

Page 7: SINGLE SOURCE SUPPLIER FOR BUILDING PRODUCTS · 2019. 7. 16. · single source supplier for building products technical support 1 (800) se-specs [737-7327]

METAL ROOFING PRODUCTSM

ETA

L R

OO

FIN

G P

RO

DU

CT

S

3 4

VERTI-LOKDesign Features: Architectural / Structural concealed standing seam panel.

• 16” width coverage

• 1-3/4” seam height

• 24 gauge

• Minimum roof slope 2/12 pitch

• Snap lock panel design

• Striations are optional

Material: Galvalume & SemCoat Plus

Gable/Rake

Double Angle

Outside Corner

Base Drip Drip Cap

J-ChannelSidewall

Endwall

Inside Corner

Eave

Sliding DoorTrack Cover

Post Cover

Ridge/PeakRidge/Peak

Vented Ridge

J-Channel

Outside InsideUniversal Closure

COMMERCIAL LINE OF TRIMS & ACCESSORIES

Page 8: SINGLE SOURCE SUPPLIER FOR BUILDING PRODUCTS · 2019. 7. 16. · single source supplier for building products technical support 1 (800) se-specs [737-7327]

ME

TAL

RO

OF

ING

PR

OD

UC

TS

5 6

SEM-LOKDesign Features: Architectural concealed fastener standing seam panel.

• 16” width coverage

• 1” seam height

• 26 and 24 gauge

• Minimum roof slope 2/12 pitch

• Hemmed snap lock design

• Low gloss paint finish

• Striations are optional

Material: Galvalume & SemCoat Plus

ROCK-LOKDesign Features: Architectural / Structural concealed clip standing seam panel.

• 16” width coverage

• 2” seam height

• 24 gauge

• Minimum roof slope 2/12 pitch

• Mechanically seamed design

• Striations are optional

Material: Galvalume & SemCoat Plus

Page 9: SINGLE SOURCE SUPPLIER FOR BUILDING PRODUCTS · 2019. 7. 16. · single source supplier for building products technical support 1 (800) se-specs [737-7327]

METAL ROOFING PRODUCTSM

ETA

L R

OO

FIN

G P

RO

DU

CT

S

5 6

2-1/2” & 1-1/4” CORRUGATEDDesign Features: Architectural exposed fastener panel.

• 21-1/2” width coverage (roof) and 24” width coverage (siding).

• 1-1/4” and 2-1/2” corrugations on center spacing availability

• 1/2” corrugation height

• Utility, 29, 26 and 24 gauge

• Minimum roof slope 3/12 pitch

Material: Galvanized Steel, Galvalume, SemCoat & SemCoat Plus

Page 10: SINGLE SOURCE SUPPLIER FOR BUILDING PRODUCTS · 2019. 7. 16. · single source supplier for building products technical support 1 (800) se-specs [737-7327]

FL

AS

HIN

G &

EX

TE

RIO

R T

RIM

PR

OD

UC

TS

SIZE 26 GA. 28 GA. ST HT 26 GA. .032 NOM .024 NOM

GALVANIZED ZINC/ALUM ALUMINUM

1-1/2”X1-1/2” 3”X3” 10090 10154 10154 4”X4’ 10104 10168 4”X5” 10110 23167 10083 4”X6” 10112 10186 23352 5”X5” 10118 10196 10206 10084 21402 5”X7” 10126 40266 6”X6” 10128 10210 10216

3”X3-1/2”X1/2” 10156 4”X3-1/2”X1/2” 10102 10136 10174 10176 4”X4”X1/2” 10106 10138 10170 10172 4”X4-1/2”X1/2” 10182 4”X5-1/2”X1/2” 10192 5”X4-1/2”X1/2” 10122 10202 10204 5”X5”X1/2” 10198 10200 6”X5-1/2”X1/2” 10130 10212 10214 10072

BROWN 5”X5” 10080WHITE 5”X5” 10082BLACK 5”X5” 10129

HEMMED

ANGLE FLASHINGDesign Features: Protects against leaks at walls and chimneys to roof connections.

• 10’ Lengths

• 20 Pieces Per Bundle - Pallet quantities vary

7 8

PAINTED

Page 11: SINGLE SOURCE SUPPLIER FOR BUILDING PRODUCTS · 2019. 7. 16. · single source supplier for building products technical support 1 (800) se-specs [737-7327]

FLASHING & EXTERIOR TRIM PRODUCTSF

LA

SH

ING

& E

XT

ER

IOR

TR

IM P

RO

DU

CT

S

7 8

26 GA ST HT ST EC 0.024

FLASHING FORMED STEP 4”X2”X8” 12002 FLASHING FORMED STEP 4”X4”X8” 12018 12020

GALVANIZED ALUMINUMDESCRIPTION

FORMED 8”

26 GA ST HT ST EC 0.024

FLASHING FORMED STEP 2”X3”X7” 11996 11998 11958 FLASHING FORMED STEP 2”X3”X7” BLACK 11972FLASHING FORMED STEP 3”X4”X7” 12008 11984 FLASHING FORMED STEP 3”X4”X7” BLACK 11974 FLASHING FORMED STEP 4”X4”X7” 12014 FLASHING FORMED STEP 4”X5”X7” 18911 FLASHING FORMED STEP 5”X5”X7” 70195 11992 23369 FLASHING FORMED STEP 5”X5”X7” BLACK 21473FLASHING FORMED STEP 4”X5”X9” 40230

GALVANIZED ALUMINUMDESCRIPTION

FORMED 7”

26 GA ST HT ST EC 0.024

FLASHING FORMED STEP 5”x7”x10” 50019

GALVANIZED ALUMINUMDESCRIPTION

FORMED 10”

STEP FLASHINGDesign Features: Separate pieces of Step Flashing are installed as each course of shingles are applied. The upper edge of each piece of Step Flashing should extend 2” above each course of shingles. The lower edge should be 1/2” above the butte of the shingles forming the next course. This step application allows for all fasteners to be concealed. Material: Aluminum and Galvanized Steel

Footnote: 100 Pieces Per Bundle, Pallet quantities vary

26 GA ST HT ST EC

FLASHING FLAT STEP 5”X7” 11956 FLASHING FLAT STEP 5”X7” BLACK 11970

GALVANIZED ALUMINUMDESCRIPTION

FLAT

Page 12: SINGLE SOURCE SUPPLIER FOR BUILDING PRODUCTS · 2019. 7. 16. · single source supplier for building products technical support 1 (800) se-specs [737-7327]

FL

AS

HIN

G &

EX

TE

RIO

R T

RIM

PR

OD

UC

TS

EAVE DRIP-GALVANIZED STEELDesign Features: Directs rain water run-off to drip away from fascia.

Material: Galvanized Steel

Footnotes: 10’ Lengths

• 25 pieces per carton

• Pallet quantities vary

• Available in zinc/aluminum coating; use item #11062 6”x 2-1/2 F #11290

• Other sizes, colors & roof pitches available upon request.

• 6”x2-1/2”F available in 26 GA forest green, use item # 11290 & painted gray, use item #11290

9 10

MILL BROWN BLACK WHITE BEIGE MILL BROWN BLACK WHITE BEIGE MILL

ST HTNAME & FACE SIZE

26 GAUGE

11422 11330 11332 11324 11224 11430 11322 11316 11220 11256 11419 18612 11340 11230 11436 11238 NH/NR 11266NH/NR 11446NH/NR 11356 11240 11448 11354 11352 11236 11444

4X1” F 4X1-1/8” F 4-1/2X1-1/8” F 4-1/2X1-1/4” F 11020 11222 11426 11208 5X1-1/8” F 11443 5X1-1/2” F 11040 11232 11442 60034 5X1-3/4” F 20747 11440 5X2” F 11046 6X1-1/8” F 6x1-1/2” F 11050 11052 6X1-3/4” F 11056 11054 6X2-1/2” F 11048 11244 11264 11454 11214 7X1-1/2” F 11092 7X2-1/2” F 11088 21404 11090 8X2-1/2”F 11096

Page 13: SINGLE SOURCE SUPPLIER FOR BUILDING PRODUCTS · 2019. 7. 16. · single source supplier for building products technical support 1 (800) se-specs [737-7327]

FLASHING & EXTERIOR TRIM PRODUCTSF

LA

SH

ING

& E

XT

ER

IOR

TR

IM P

RO

DU

CT

S

9 10

EAVE DRIP-ALUMINUM Design Features: Directs rain water run-off to drip away from fascia.

Material: Aluminum and Painted

Footnotes: 10’ Lengths

• Pallet quantities vary

BROWN WHITE BROWN WHITE BROWN WHITE MILL BROWN WHITE BLACK CLAY

4”, 1”F 4-1/2”, 1”F 4-1/2”, 1-1/8”F 4-1/2”, 1-1/4”F 11172 11372 5”, 1-1/2”F 29997 29998 11392 5”, 1-3/4”F 60053 60051 11384 6”, 1-3/4”F 6”, 2-1/2”F 11200 11404 11196 11398 11202 11408

11294 11168 11368 11248 11274 11366 11204 11412 11296 11170 11370 11250 11390 11402 11194 11396

STNAME & FACE SIZE

.032 NOM .025 NOM .020 NOM

Page 14: SINGLE SOURCE SUPPLIER FOR BUILDING PRODUCTS · 2019. 7. 16. · single source supplier for building products technical support 1 (800) se-specs [737-7327]

FL

AS

HIN

G &

EX

TE

RIO

R T

RIM

PR

OD

UC

TS

ALUMINUM

MILL WHITE BROWNWHITE BROWN

3”, 1-1/2” FACE 15525 15565 4”, 2” FACE 23049 15569 15491 6”, 2” FACE 26577 98058 6”, 3” FACE 50058

NAME & FACE SIZE

0.025 ST

ROOF EDGEDesign Features: Protects roofing from water damage along entire eave.

Material: Galvanized Steel, Aluminum and Painted

Footnotes: 10’ Lengths. Also available in 26 GA Galvalume.

• For 4”x2” face use item #15439

• For 6”x3” face use item #15463

• For 3”x1-1/2” F use item #15425

• Carton and pallet quantities vary - Call for amounts

11 12

GALVANIZED STEEL

MILL WHITE BROWN MILL MILL WHITE BROWN

15535 15531 15585 15539 15541 15547 15485 15549 15555 15553 15593 15559 15562

NAME & FACE SIZE

24 GA 26 GAUGE ST29 GA HT

MILL

3”, 1” FACE 3”, 1-1/2” FACE 15421 4”, 2” FACE 15431 4-1/2”, 2-1/2” FACE 15435 15589 5”. 2” FACE 50021 5”, 2-1/2” FACE 15453 5”, 3” FACE 15449 6”, 2” FACE 15459 6”, 3” FACE 15455 15595 15507 8”, 4” FACE 23290 15471

Page 15: SINGLE SOURCE SUPPLIER FOR BUILDING PRODUCTS · 2019. 7. 16. · single source supplier for building products technical support 1 (800) se-specs [737-7327]

FLASHING & EXTERIOR TRIM PRODUCTSF

LA

SH

ING

& E

XT

ER

IOR

TR

IM P

RO

DU

CT

S

ITEM DESCRIPTION GAUGE SIZE QTY PER PLT

16017 STUCCO FLASHING 26 5” 25 500

16019 STUCCO FLASHING EX. BEND 26 5” 25 500

11 12

ITEM DESCRIPTION DIAMETER PER CTN PER PLT

16741 TIN CAPS TN 1-5/8” 50 lbs 48 16742 TIN CAPS GALVANIZED 1-5/8” 50 lbs 48

26 GA 28 GA ST HT

APRON FLASHING 7-1/2” 11889 11899 11905 11907 APRON FLASHING 8-1/2” 11903 APRON FLASHING 7” 11909 DORMER FLASHING 8” 10866 10868

DESCRIPTION

Design Features: Utilized in securing the moisture barrier felt paper base sheet to roof decks.

Material: 30 Gauge Galvanized Steel

Footnote: Galvanized Tin Caps Miami Dade County product control approved for corrosion resistance.

STUCCO FLASHINGDesign Features: Used as a stucco stop to separate either wallboard siding or stucco plaster.

Material: 26 Gauge Galvanized Steel

APRON/DORMER FLASHINGDesign Features: Protects roofing from water damage; wall to roof connections typically beneath a dormer.

Material: Galvanized Steel

Footnote: 20 Pieces Per Bundle, Pallet quantities vary

TIN CAPS

Page 16: SINGLE SOURCE SUPPLIER FOR BUILDING PRODUCTS · 2019. 7. 16. · single source supplier for building products technical support 1 (800) se-specs [737-7327]

FL

AS

HIN

G &

EX

TE

RIO

R T

RIM

PR

OD

UC

TS

DESCRIPTION SIZE ST HT

RIDGE ROLL 1-1/4” CORRUGATED 10” 15637 RIDGE ROLL 2-1/2” CORRUGATED 10” 15636 RIDGE ROLL 2-1/2” CORRUGATED 12” 70008

HTST

RIDGE ROLL 10” 15648 15650 RIDGE ROLL 12” 15652 RIDGE ROLL 14” 15654 RIDGE ROLL 18” 15658

DESCRIPTION SIZE

RIDGE ROLL-GALVANIZEDDesign Features: Flashing for hip and ridge roof sections. For shingle or metal roof applications.

Material: Galvanized Steel

Footnote: Corrugated edge to match roofing profile.

• 10’ Lengths

• 10 per bundle minimum order

26 GA ST HT ST

WATER DIVERTER 7-1/2” 17676 17690 17692 WATER DIVERTER 9” 17682 WATER DIVERTER 7-1/2” BLACK 17684 WATER DIVERTER 7-1/2” BROWN

GALVANIZED STEEL ALUM. DESCRIPTION SIZE COLOR

WATER DIVERTERDesign Features: Directs rain water run-off away from entrances and other structures.

Material: Galvanized Steel, Aluminum

Footnote: 10’ Lengths

13 14

Page 17: SINGLE SOURCE SUPPLIER FOR BUILDING PRODUCTS · 2019. 7. 16. · single source supplier for building products technical support 1 (800) se-specs [737-7327]

FLASHING & EXTERIOR TRIM PRODUCTSF

LA

SH

ING

& E

XT

ER

IOR

TR

IM P

RO

DU

CT

S

13 14

HT ST 26 GA

2”X5/8”X3/8” 17845 17843 17807 2-1/8”X1/2”X3/8” 17839 2-1/4”X3/8”X3/8” 17837 17835 60039

GALVANIZED STEELSIZE

Z FLASHINGDesign Features: Protects top edge of siding sheets from water infiltration.

Material: Galvanized, Steel, Aluminum

Footnotes: 10’ Lengths; 20 Pieces Per Bundle, 2500 Per Pallet

Page 18: SINGLE SOURCE SUPPLIER FOR BUILDING PRODUCTS · 2019. 7. 16. · single source supplier for building products technical support 1 (800) se-specs [737-7327]

FL

AS

HIN

G &

EX

TE

RIO

R T

RIM

PR

OD

UC

TS

15

PREFORMED VALLEY

26 GA 28 GA ST

VALLEY PREFORMED 18” 14866 18484

GALVANIZEDDESCRIPTIONNO HEM

VALLEY PRODUCTSDesign Features: Directs rain water run-off where two slopes form a valley “V” drainage to the eave.

Material: Galvanized Steel & Aluminum

Footnotes: 10’ Lengths

• 10 per bundle minimum order, 100 Pieces Per Pallet

“V” FORMED VALLEY HEM

26 GA 28 GA ST

GALVANIZEDDESCRIPTION

HEM

VALLEY FORMED 18” 12037

“V” FORMED VALLEY

26 GA 28 GA ST

VALLEY FORMED 15” 12038

GALVANIZEDDESCRIPTION

NO HEM

Page 19: SINGLE SOURCE SUPPLIER FOR BUILDING PRODUCTS · 2019. 7. 16. · single source supplier for building products technical support 1 (800) se-specs [737-7327]

FLASHING & EXTERIOR TRIM PRODUCTSF

LA

SH

ING

& E

XT

ER

IOR

TR

IM P

RO

DU

CT

S

PREFORMED TILE VALLEY 24” OPEN ANGLE

OPEN WATER BREAK

TILE VALLEY 24” 60037 60041

DESCRIPTION GALV ALUM ZINC/ALUM

26 GA .032 N 26 GA

CLOSED WATER BREAK

TILE VALLEY 24” CLOSED 22095

DESCRIPTION GALV ALUM ZINC/ALUM

26 GA .032 N 26 GA

PREFORMED VALLEY HEMMED

26 GA 28 GA ST .032 NOM

GALVANIZED ALUM.DESCRIPTION

HEMMED

VALLEY PF 18” BLACK HEM 14897 14896 VALLEY PF 18” BROWN HEM 14898 VALLEY PF 18” HEM 14868 14877

16

Page 20: SINGLE SOURCE SUPPLIER FOR BUILDING PRODUCTS · 2019. 7. 16. · single source supplier for building products technical support 1 (800) se-specs [737-7327]

FL

AS

HIN

G &

EX

TE

RIO

R T

RIM

PR

OD

UC

TS

17

VALLEY ROLLEDDesign Features: Rolled sheet metal available in various thicknesses and widths. Both in Galvanized Steel & Aluminum for multiple uses of flashing or “do it yourself projects.” Material: Galvanized Steel & Aluminum• Pallet quantities vary

SIZE HT ST 26 GA. .024 NOM .019 NOM STANDARD .010 NOM ECONOMY

GALVANIZED ALUMINUM .013 NOMWHT/BRN

6” X 10’ 17472 17388 8” X 10’ 17480 10” X 10’ 17404 17275 17191 12” X 10’ 17413 17291 14” X 10’ 17420 17306 17197 16” X 10’ 17426 20” X 10’ 17439 17339 24” X 10’ 17447 17359 8” X 25’ 17482 17393 10”X25’ 17406 10”X25’ 17277 12” X 25’ 17415 17293 14” X 25’ 17422 16” X 25’ 17428 17330 20” X 25’ 17441 24”X25’ 17355 4” X 50’ 17465 6” X 50’ 17471 17387 8” X 50’ 17479 17214 17390 10” X 50’ 17403 17215 17280 17208 17274 12” X 50’ 17412 17407 17216 17295 17290 14” X 50’ 17419 17416 17210 17305 16” X 50’ 17425 17423 17222 20766 17317 17324 17211 17318 18” X 50’ 17431 17429 17223 17331 17332 20' X 50’ 17438 17435* 17226 17212 17338 24” X 50’ 17446 17442 17227 17352 28”X50’ 17435 30” X 50’ 17456 17237 36” X 50’ 17460 17458 17369 12”X50’ BLK 17467 17467 28X50” 17435 10” X 70’ 17402

Page 21: SINGLE SOURCE SUPPLIER FOR BUILDING PRODUCTS · 2019. 7. 16. · single source supplier for building products technical support 1 (800) se-specs [737-7327]

FASCIA & SOFFIT PRODUCTSFA

SC

IA &

SO

FF

IT P

RO

DU

CT

S

18

FASCIA TRIMDesign Features: Aluminum Fascia Trim covers existing wood fascia, providing a moisture barrier and maintenance-free roof edge fascia.

Material: .019 Painted Aluminum

• Pallet quantity may vary

SIZE ST BROWNALUMINUM

ST WHITEALUMINUMDESCRIPTION

FASCIA TRIM 4”X12’ 17557 17532 25

FASCIA TRIM 6”X12’ 17559 17534 25

PERCTN

PERCTN

PER CTNPALLET

CTN WT(lbs)FINISH GAUGE LENGTH

PRODUCTCODE

17528 MILL FINISH 26 10’-0” 39 50 45 ALUMINUM

LAP SIDING STARTER STRIPDesign Features: Provides a straight, true & level starter for lap siding. Provides a straight starter for the finished siding jobs.

Material: Aluminum

Footnotes: * Universal for vinyl, aluminum, wood & hardboard siding.

* Mill finished aluminum for excellent corrosion resistance.

* Slotted Nail hole spaces to allow for expansion & contraction.

* Hemmed edges & stiffener ribs help to maintain alignment.

Page 22: SINGLE SOURCE SUPPLIER FOR BUILDING PRODUCTS · 2019. 7. 16. · single source supplier for building products technical support 1 (800) se-specs [737-7327]

FAS

CIA

& S

OF

FIT

PR

OD

UC

TS

SIZE MATERIALDESCRIPTION

12754 H-MOLDING 3/8”X12’ ALUMINUM 50

H-MOLDINGDesign Features: Used to splice butt joints of plywood soffit systems.

Material: Aluminum Extrusion

SIZE ST BROWNALUMINUM

ST WHITEALUMINUMDESCRIPTION

SOFFIT J CHANNEL 12’ 17566 17537

SOFFIT J CHANNELDesign Features: Used to secure the soffit system at the sidewall or undereave connection.

Material: Aluminum

19

PER CTN

SIZE PERFORATEDDESCRIPTION

SOFFIT (BROWN) 12”X12’ 17541 17

SOFFIT (WHITE) 12”X12’ 17564 17

SOFFIT SYSTEMDesign Features: Aluminum Soffit Panels protect the underside of roof overhang or porch ceilings. Perforated Panels allow eave air intake to circulate through the attic to reduce heat and unwanted moisture. Material: Painted, Perforated

PER CTN

Page 23: SINGLE SOURCE SUPPLIER FOR BUILDING PRODUCTS · 2019. 7. 16. · single source supplier for building products technical support 1 (800) se-specs [737-7327]

VENTILATION PRODUCTSV

EN

TIL

AT

ION

PR

OD

UC

TS

20

TIB-12STurbine and BaseInternal Bracing

TURBINES WITHSTAND HURRICANE FORCE WINDS OF 150 mph!

MILL WHITE BLACK BROWNBRACINGMATERIAL

MODELNUMBER

AVAILABLE COLORSDIAMETEROPENING

NET FREE AREA NO. PER CARTON

COMPLETE SETS - TURBINE WITH BASE Internal Bracing

TIB-12S ALUMINUM 17007 INTERNAL 12” 95 sq. in. 1 SET

TIB-14S ALUMINUM TIBS1400 INTERNAL 14” 132 sq. in. 1 SET

12” & 14” TURBINEDesign Features:

• Maintenance-free dual ball bearing system

• Heavy-duty polypropylene bracing system

• Adjustable base

• 12”– 95 square inch net free area

• 14” – 132 square inch net free area

• Limited lifetime warranty

• Pallet quantities vary

Material: Aluminum and Galvanized Steel

VENTILATION PRODUCTS

RV-61PLASTICCSA Approved

MILL BLACK BROWN WHITE GRAY

SLP 61 15898 16-1/4”X19-1/2” 9” 61 sq. in. 12 20

FLASHINGDIMENSIONS

MODELNUMBER

AVAILABLE COLORSOPENING

SIZENET FREE

AREANO. PER CARTON

HEAVY-DUTY POLYPROPYLENE MATERIAL WITH ALUMINUM SCREEN

STATIC VENTILATORSDesign Features: Engineered for efficient roof ventilation

• Roof Louvers have 8”x8” Aluminum Screen

• Ideal for kitchen or bathroom exhaust caps on roof

• Fast, Easy-Up Installation

• Saves energy and reduces moisture damage to painted surfaces

• Helps prolong the life of your roof

• Rain diverter bead on base

Material: Aluminum & Galvanized Steel

PERPLT

Page 24: SINGLE SOURCE SUPPLIER FOR BUILDING PRODUCTS · 2019. 7. 16. · single source supplier for building products technical support 1 (800) se-specs [737-7327]

VE

NT

ILA

TIO

N P

RO

DU

CT

S

84718 VVP 18 sq. in. 10

MATERIALMODELNUMBER

ITEMNUMBER

NET FREE AREAPER LIN. FT

NO. PER CARTON

VENTURI VENTBLACK

POLYPROPYLENE

MILL WHITE BROWN

SV201 15914 15916 15915 2” 8 ft. 92 sq. in. 50

SP-8 16086 16088 16087 2” 8 ft. 61 sq. in. 50

WIDTHMODELNUMBER

AVAILABLE COLORS SECTION FREELENGTH AREA

NO. PER CARTON

SP SERIES Perforated 1/8” Hole Pattern

SA SERIES Bi-Directional Louvers (1/8” x 1” louvers)

VENTURI VENTDesign Features: Designed for RIDGE & HIP applications.

• External baffle shingle-over

• Built-in end plug

• 18” NFA per linear foot

• Individual cartons can ship UPS

• 30-Year limited warranty;

5-year Replacement Plus protection

• Dade County Approval

Material: Durable Polypropylene

ALUMINUM SOFFIT-STRIPDesign Features: Provides a continuous under soffit air flow to provide superior ventilation.

Material: Aluminum

SP SERIES

SA SERIES SA SERIES

21

Page 25: SINGLE SOURCE SUPPLIER FOR BUILDING PRODUCTS · 2019. 7. 16. · single source supplier for building products technical support 1 (800) se-specs [737-7327]

VENTILATION PRODUCTSV

EN

TIL

AT

ION

PR

OD

UC

TS

22

ALUMINUM SOFFIT-STRIPDesign Features: Provides a continuous under soffit air flow to provide superior ventilation.

Material: Aluminum

MILL WHITE BROWN BLACK BRONZE W. GRAY

RV-10 H.D. 98079 98080 98082 98081 16 sq. in. 12

RV-10 84401 84405 84403 84406 84402 16 sq. in. 12

NET FREE AREA

PER LIN. FT.

MODELNUMBER

AVAILABLE COLORSNO. PER CARTON

RIDGE VENT Bulk 10 ft. lengths

END/PLUG CONNECTOR

RAF-12R NA 36# 15900 (BLACK PLASTIC)

UNIVERSAL RIDGE VENT-ALUMINUMDesign Features: Removes superheated attic air

• Self-flashing

• Low profile blends easily with roof line

• Reduces damage to painted surfaces in winter from trapped moisture

• Weather baffle of aluminum is built into the ridge vent shape

• Can be installed on new or existing construction.

• May be installed with or without connectors

Material: Embossed Aluminum

Page 26: SINGLE SOURCE SUPPLIER FOR BUILDING PRODUCTS · 2019. 7. 16. · single source supplier for building products technical support 1 (800) se-specs [737-7327]

VE

NT

ILA

TIO

N P

RO

DU

CT

S

23

MODELNUMBER MILL

SIZENET FREE

AREAPER

CARTON

COLORS

CAST ALUMINUM FA 108 11854 16”X8” 36 sq. in. 12

ALUMINUM UNDER-EAVE LOUVER

UA 16-8 17103 17104 16”X8” 56 sq. in. 12 UA 16-4 17101 17102 16”X4” 27 sq. in. 24

MODELNUMBER

PER CARTONMILL

AVAILABLE COLORS

WHITE BROWN SIZES FREE AREA

LOUVERSDesign Features: Vent opening designed to keep out insects and weather while providing proper wall or under eave ventilation. Eleminates damage caused by trapped moisture.

Material: Aluminum

U.S. Building Codes require 1 sq. ft. of ventilation for every 300 sq. ft. of crawl space. However, certain areas require 1 sq. ft. of ventilation for every 150 sq. ft. of crawl space. If you are in these areas, you should double the number of foundation vents used.

Note: Proper vapor barriers should be used in conjunction with foundation vents.

FOUNDATION VENTSDesign Features:

• Aluminum Screen

• Adjustable Sliding Damper

• Aluminum screen furnished

Material: Cast Aluminum, Stamped Aluminum & Plastic

SQ FT OFFLOOR AREA

11854ALSL

1000 13

1500 20

2000 27

2500 33

3000 40 ALSL Cast Aluminum

Sliding Damper

Page 27: SINGLE SOURCE SUPPLIER FOR BUILDING PRODUCTS · 2019. 7. 16. · single source supplier for building products technical support 1 (800) se-specs [737-7327]

VENTILATION PRODUCTSV

EN

TIL

AT

ION

PR

OD

UC

TS

24

WEATHER VENTDesign Features:

• Screened external wind baffle provides superior air flow with maximum weather protection

• Utilized with gable and/or undereave soffit vents, this system provides an effective natural air flow

• Self flashing flanges allow for easy installation

• Install Off Ridge on roof slope for unobstructed peak line

• Available in other colors and gauges, Pallet quantities vary

• U.S. Patent Number: 7,044,852 B2

• Miami Dade approved, NOA Number 03-1008.02

Material: Galvanized, Galvalume Steel

26 GA GALV 17612 17590 80004 2’ 52 2 26 GA GALV 63000 63003 63002 63001 4’ 104 1 26 GA GALV 60548 17642 17594 17603 6’ 156 2 26 GA GALV 60549 17643 17595 17604 8’ 207 2 26 GA GALV 17611 17588 10’ 259 2 26 GA GM TILE 60014 4’ 26 GA GM TILE 60016 4’ 144 2 26 GA GM TILE 60028 8’ 248 2 26 GA GALV TILE 17625 4’ 248 2 26 GA GALV TILE 17626 6’ 26 GA GALV TILE 17627 8’ 26 GA GALV TILE 17624 10’

DESCRIPTIONMILL WHITE BROWN BLACK

SIZE NET SQ. IN.

PER CARTONAVAILABLE COLORS

A slight breeze up and over the vent will exponentially increase attic air exhaust!

Pressure Gradiant

Wind &

WeatherElements

Attic Exhaust

Page 28: SINGLE SOURCE SUPPLIER FOR BUILDING PRODUCTS · 2019. 7. 16. · single source supplier for building products technical support 1 (800) se-specs [737-7327]

VE

NT

ILA

TIO

N P

RO

DU

CT

S

25

GOOSE NECK VENTDesign Features:

• Sheltered internal air dampers provides one-way air venting with damper

• Round design provides superior air flow

• Most effective when utilized in a kitchen or bath exhaust application

• Self flashing flanges make for easy installation on new or existing construction

• Available without dampers

• Available in higher profile for tile special order

Materials: 26 Gauge Galvanized Galvalume Steel or Aluminum

DESCRIPTIONMILL WHITE BROWN BLACK

NET SQ. IN.

PER CARTONAVAILABLE COLORS

26 GA GALV. 4” NO DAMPER 17614 12 12 26 GA GALV. 4” WITH DAMPER 17615 17640 17592 60027 12 12 26 GA GALV. 6” NO DAMPER 17618 18 6 26 GA GALV. 6” WITH DAMPER 17619 60031 60035 18 6 26 GA GALV. 10” NO DAMPER 17609 17637 17587 30 6 26 GA GALV. 10” WITH DAMPER 22999 17644 17596 17605 30 6

26 GA GALV. 4” NO DAMPER TILE 60024 14 6

26 GA GALV. 6” WITH DAMPER TILE 60021 20 4 26 GA GALV. 10” NO DAMPER TILE 60022 35 4 26 GA GALV. 10” WITH DAMPER TILE 60020 35 4

26 GA GM. 4” NO DAMPER 60013 12 12 26 GA GM. 4” WITH DAMPER 60011 12 12 26 GA GM. 6” NO DAMPER 60630 18 6 26 GA GM. 6” WITH DAMPER 60635 18 6 26 GA GM. 10” NO DAMPER 60012 35 6 26 GA GM. 10” WITH DAMPER 60010 30 6

.020 AL 4” NO DAMPER 17575 60029 60025 12 12 .020 AL 4” WITH DAMPER 17576 12 12 .020 AL 6” WITH DAMPER 17579 6 .020 AL 10” NO DAMPER 17568 17633 17583 30 6 .020 AL 10” WITH DAMPER 17570 60262 30 6

.020 AL 4” NO DAMPER TILE 60023 16 12 .020 AL 10” NO DAMPER TILE 17572 35 4

Page 29: SINGLE SOURCE SUPPLIER FOR BUILDING PRODUCTS · 2019. 7. 16. · single source supplier for building products technical support 1 (800) se-specs [737-7327]

VENTILATION PRODUCTSV

EN

TIL

AT

ION

PR

OD

UC

TS

26

15931 3” 100 15933 5” 50

MODELNUMBER

SIZEPER

CARTON

SIZE

17510 3” 15 17512 4” 12 17514 5” 9 17519 6” 12 17521 7” 12

MODELNUMBER SIZE PER

CARTON

GALVANIZED SHANTY CAPRain cap for snap lock round pipe. For 3”-8” diameter snap lock pipe.

GALVANIZED ROOF JACKRain cap with wind band & roof, deck mounting flange.• Items are 4/12 pitch• Also available in flat

Page 30: SINGLE SOURCE SUPPLIER FOR BUILDING PRODUCTS · 2019. 7. 16. · single source supplier for building products technical support 1 (800) se-specs [737-7327]

CO

NC

RE

TE

& M

AS

ON

RY

PR

OD

UC

TS

27 28

ITEM DESCRIPTION GAUGE PERCTN

17092 BLACK TIE WIRE 3.5# ROLL 16 20 960

TIE WIREDesign Features: Proper tying of reinforcing bars is essential in order to maintain position during concrete placement. 340 ft. coil allows virtually any length wire ties.

PLASTIC

DOUBLE TRIPLE

ROD CHAIRSDesign Features: To maintain the steel a proper distance from forms. Rod chair bar supports accurately locate and firmly hold in place all reinforcing steel before and during the placing of concrete. Single level design as required by specification.

Installation: Spacing between rod chair bar supports is a maximum of 4’-0” o.c. and 2’-0” from corners. For further information refer to your building code for proper distances.

W H ITEM STEEL SIZE PER CTN

15072 2 9” 3-1/4” 10015145 3 12” 3-1/4” 10014997 PLASTIC 2-1/4” 2014998 PLASTIC 2-1/4” 500

PERPLT

Page 31: SINGLE SOURCE SUPPLIER FOR BUILDING PRODUCTS · 2019. 7. 16. · single source supplier for building products technical support 1 (800) se-specs [737-7327]

CONCRETE & MASONRY PRODUCTSC

ON

CR

ET

E &

MA

SO

NR

Y P

RO

DU

CT

S

27 28

ANCHOR BOLTWITH NUT & 1” WASHER

ANCHOR BOLTS & WASHERSDesign Features: Bolt only with code minimum embedment with 3000 PSI concrete will resist 4,800 lbs, see washer capacity below.

Materials: Black and galvanized steel

Footnote: Other sizes available on request . All references to bolts or MB’s are structural quality through bolts equal to or better than ASTM Standard A307

ITEM SIZE & DIAMETER PERCTN

10003 1/2” X 10” 50 10019 1/2” X 6” 50 2500 10021 1/2” X 8” 50 2500 10006 5/8” X 10” W/3” X 1/8” SLOTTED WASHER 50

PERPLT

Page 32: SINGLE SOURCE SUPPLIER FOR BUILDING PRODUCTS · 2019. 7. 16. · single source supplier for building products technical support 1 (800) se-specs [737-7327]

CO

NC

RE

TE

& M

AS

ON

RY

PR

OD

UC

TS

PIER CAPSDesign Features: Provides an effective metal moisture barrier separation between concrete and wood floor framing.

Material: 26 Gauge Galvanized Steel

29

ITEM DESCRIPTION SIZE GAUGE PER CTN PER CTN

10485 PIER CAP 8” X 8” 26 50 50010495 PIER CAP 8” X 16” 26 50 500

BAR TIESDesign Features: Proper tying of bars is essential in order to maintain their position during concrete placement. Eye hooks on bar tie ends allow fast securement by hand or with available installation tool.

Materials: 16 gauge black, soft-annealed wire

ITEM SIZE BUNDLEPERCTN

PERPLT

34002 4” 1000/BD 4,000 5434004 5” 1000/BD 4,000 6334003 5-1/2” 1000/BD 4,000 63 34006 6” 1000/BD 4,000 6334005 6-1/2” 1000/BD 4,000 63

Page 33: SINGLE SOURCE SUPPLIER FOR BUILDING PRODUCTS · 2019. 7. 16. · single source supplier for building products technical support 1 (800) se-specs [737-7327]

CONCRETE & MASONRY PRODUCTSC

ON

CR

ET

E &

MA

SO

NR

Y P

RO

DU

CT

S

14980 REBAR SAFETY CAP #3 - #8 250

10564 CAVITY CAP #2 FOR 8”X16” BLOCK 200/CT 8400

ITEM DESCRIPTION PER CTN PER PLT

ITEM DESCRIPTION SIZE PER CTN

REBAR SAFETY CAPSDesign Features: Provides a safety cover for the tops of exposed reinforcing bars.

Material: Safety Orange Plastic

Footnote: Not for impalement protection

CAVITY CAPSDesign Features: Preformed center locks firmly between concrete block cells to stop mortar infiltration.

BAR TIE TOOLS-TWISTERDesign Features: Swivel or spiral twisting handle speeds tying process.

10430 BAR TIE AUTOMATIC TWISTER TOOL 110431 BAR TIE MANUAL TWISTER TOOL 1

ITEM DESCRIPTION PER CTN

30

Page 34: SINGLE SOURCE SUPPLIER FOR BUILDING PRODUCTS · 2019. 7. 16. · single source supplier for building products technical support 1 (800) se-specs [737-7327]

CO

NC

RE

TE

& M

AS

ON

RY

PR

OD

UC

TS

NOMINAL DIMENSIONS - ROUND SECTIONSBAR SIZEDESIGNATION

DIAMETERINCHES

CROSSSECTIONAL

AREASQ. INCHES

PERIMETERINCHES

WEIGHTPOUND

PER FOOT

#3 0.376 0.375 (3/8”) 0.11 1.178

#4 0.668 0.500 (1/2”) 0.20 1.571

#5 1.043 0.625 (5/8”) 0.31 1.963

#6 1.502 0.750 (3/4”) 0.44 2.356

ASTM STANDARD REINFORCING BARS

REBARDesign Features: Provides expansion and contraction reinforcement for concrete.

Material: ASTM A615 (60,000 PSI Minimum Yield Strength)

ITEM DESCRIPTION STEEL SIZE COLOR ANGLE

14949 REBAR 3 3/8”X10’ ORANGE STRAIGHT14950 REBAR 3 3/8”X2’ ORANGE STRAIGHT14952 REBAR 3 3/8”X4’ ORANGE STRAIGHT14956 REBAR 4 1/2”X10’ YELLOW STRAIGHT14958 REBAR 4 1/2”X2’ YELLOW STRAIGHT14959 REBAR 4 1/2”X20’ YELLOW STRAIGHT14960 REBAR 4 1/2”X4’ YELLOW STRAIGHT14975 REBAR 5 5/8”X1’X4’ WHITE BENT 90O

50016 REBAR 5 30”X30” WHITE BENT 90O

14965 REBAR 5 5/8”X10’ WHITE STRAIGHT14967 REBAR 5 5/8”X2’ WHITE STRAIGHT14968 REBAR 5 5/8”X20’ WHITE STRAIGHT14970 REBAR 5 5/8”X4’ WHITE STRAIGHT18605 REBAR 6 3/4”X20’ BLUE STRAIGHT14974 U 5 3’X3’ WHITE BENT 90º

3231

Page 35: SINGLE SOURCE SUPPLIER FOR BUILDING PRODUCTS · 2019. 7. 16. · single source supplier for building products technical support 1 (800) se-specs [737-7327]

CONCRETE & MASONRY PRODUCTSC

ON

CR

ET

E &

MA

SO

NR

Y P

RO

DU

CT

S

SCALLOPED

STRAIGHT EDGE

WALL TIEDesign Features: Firmly anchor brick veneer wall courses to the supporting wood or block wall structure. Deep corrugations provide strong anchorage in mortar courses. Heavy galvanizing over steel protects against corrosion and rust. Easy to install by bending at proper angles and nailing to wood header, or use flat when veneering brick to masonry substructures. Codes usually require one wall tie for three sq. ft. of surface area. Wall Ties are spaced two ft. on center horizontally and 16-18 inches on center vertically.

Materials: Standard gauge and 22 gauge galvanized steel.

17049 TERMITE SHIELD 28 4”X2”X10’ 20/BD 17043 TERMITE SHIELD ST 8”X2”X10’ 20/BD17051 TERMITE SHIELD ST 4”X2”X10’ 20/BD 500

ITEM DESCRIPTION GAUGE SIZE BNDL PER PLT

TERMITE SHIELDDesign Features: Provides a moisture & termite barrier for wood sill-to-concrete contact.

Material: Galvanized Steel

34400 7/8 7 STRAIGHT EDGE DUPLEX 22 500 4834401 3/4 7 GRIPTITE-SCALLOPED 22 500 4834402 7/8 7 STRAIGHT EDGE DUPLEX STD 500 6434403 3/4 7 GRIPTITE-SCALLOPED STD 500 64

ITEM DIMENSIONS W L

PERCTNDESCRIPTION GAUGE PER

PLT

3231

Page 36: SINGLE SOURCE SUPPLIER FOR BUILDING PRODUCTS · 2019. 7. 16. · single source supplier for building products technical support 1 (800) se-specs [737-7327]

CO

NC

RE

TE

& M

AS

ON

RY

PR

OD

UC

TS

SLOT

ANCHOR

PERCTN

18842 8’ DOVETAIL ANCHOR SLOT 24 25 36018841 10’ DOVETAIL ANCHOR SLOT 24 25 36018733 3-1/2” DOVETAIL ANCHOR 16 500 12000

20804 5-1/2” DOVETAIL ANCHOR 16 400 960010918 7-1/2” DOVETAIL ANCHOR 16 300 7200

ITEM SIZE DESCRIPTION GAUGE

DOVETAIL ANCHOR Design Features: To anchor brick or brick veneer wall courses to the supporting wall structure. Heavy galvanizing over steel protects against corrosion and rust. For poured in place concrete columns or walls.

Material: 24 & 16 gauge galvanized steel.

PERPLT

3433

Page 37: SINGLE SOURCE SUPPLIER FOR BUILDING PRODUCTS · 2019. 7. 16. · single source supplier for building products technical support 1 (800) se-specs [737-7327]

DRYWALL CORNER BEAD PRODUCTSD

RY

WA

LL

CO

RN

ER

BE

AD

PR

OD

UC

TS

ITEM DESCRIPTION WIDTH LENGTH CTN PLT

10513 CORNER BEAD ARCHED 1-1/4” 10’ 50 2500

FLANGE

Arched Corner Bead

VINYL DRYWALL BEADS

ARCHED CORNER BEADDesign Features: Pre-notched to form curves easily. Improved slots for better radius.

Bull Nose Corner Brad

ITEM DESCRIPTION FLANGEWIDTH RADIUS LENGTH CTN PLT

10514 CORNER BEAD BULLNOSE 3/4” 10’ 35 1750

BULLNOSE CORNER BEADDesign Features: Provides an architecturally attractive corner that is both durable and straight for a soft appearance.

3433

Page 38: SINGLE SOURCE SUPPLIER FOR BUILDING PRODUCTS · 2019. 7. 16. · single source supplier for building products technical support 1 (800) se-specs [737-7327]

DR

YW

AL

L C

OR

NE

R B

EA

D P

RO

DU

CT

S

DRYWALL CORNER BEADDesign Features: Extra wide knurled flanges provide excellent joint compound, paint and texture plaster bond adhesion. Superior, strong, straight, protection from edge chipping or cracking. Excellent for use with fast setting joint compounds for easy finishing. Can be fastened to drywall corners with nails, screws or clinching tools. Unlike paper tape, steel nose beads are the most problem free from scuffing and fuzing.

Material: Galvanized & Electroplated (Grey) Steel

“J” BEADSDesign Features: This is a channel type trim that provides a neat protective edge for wallboard at windows and doors. Widely used as a terminal at intersections of wallboard and other surfacesMaterial: Galvanized SteelFootnote: Added advantage of not requiring treatment of the joint before the wall is finished.

GALVANIZED CORNER BEAD

10530 8’- 0” 56 63 3087 10532 9’- 0” 56 56 2744 10524 10’- 0” 69 50 2450 10526 12’- 0” 84 50 2450

ITEM LENGTH PERCTN

APPROXPKG/WT

PERPLT

GREY CORNER BEAD

10542 8’- 0” 56 63 3087 10544 9’- 0” 48 56 2744 10534 10’- 0” 69 50 2450

ITEM LENGTH PERCTN

APPROXPKG/WT

PERPLT

ITEM DRYWALL SIZE LENGTH PER CTN PER PLT12842 5/8” 8’ 63 308712840 1/2” 8’ 63 302412839 1/2” 10’ 50 2450

3635

Page 39: SINGLE SOURCE SUPPLIER FOR BUILDING PRODUCTS · 2019. 7. 16. · single source supplier for building products technical support 1 (800) se-specs [737-7327]

DRYWALL CORNER BEAD PRODUCTSD

RY

WA

LL

CO

RN

ER

BE

AD

PR

OD

UC

TS

“L” BEADSDesign Features: Easily installed angle-type trim provides finished appearance for wallboard edges at door and window openings. Hemmed edge on front flange adds rigidity and keeps bead straight. Nailing flange is knurled and perforated to aid cement adhesion.Material: Galvanized Steel

3/4” Radius

DRYWALL BEADS

ITEM DRYWALL SIZE LENGTH PER CTN PER PLT

13039 1/2” 10’ 50 3000

BULLNOSE CORNER BEADDesign Features: Corner bead used for a smooth, rounded finish on exposed edges of wallboard. Apply using standard industry practice. Available in a 3/4” radius, in galvanized steel.

ITEM DESCRIPTION LENGTH PER CTN PER PLT

10505 BULLNOSE CORNERBEAD 10’ 40 2400

3635

Corner Bead

CORNER BEADDesign Features: Strong, durable and straight reinforcement for drywall and veneer plaster corners.

10512 CORNER BEAD 1-1/4” 8’ 35 250010518 CORNER BEAD 1-1/4” 10’ 50 2500

FLANGEITEM DESCRIPTION WIDTH LENGTH CTN PLT

Page 40: SINGLE SOURCE SUPPLIER FOR BUILDING PRODUCTS · 2019. 7. 16. · single source supplier for building products technical support 1 (800) se-specs [737-7327]

BU

ILD

ER

HA

RD

WA

RE

PR

OD

UC

TS

34027 7/16 20 250 5034025 15/32 20 250 10034026 5/8 20 250 100

ITEMS SIZE GAUGE PERCTN

GALVANIZED PLYWOOD CLIPDesign Features: Easy and fast, just slip over sheathing edge. Snug self-lock keeps clip firmly in position throughout panel placement. Eliminates unreliable wood edge blocking.

Materials: 20 Gauge Galvanized Steel

34015 16” 13 50034016 24” 13 500

ITEM SIZE GAUGE PERCTN

INSULATION SUPPORT WIREDesign Features: Insulation Spikes are the simple, quick and economical way to hold insulation in place between studs and joist. Easy to use, just flex-locate and it will remain locked until desired to remove.

Materials: 13 Gauge Galvanized Steel

PERPLT

ITEMS SIZE PERCTN

34019 1/2 2000 34021 5/8 2000 1334023 3/4 200034022 7/16 2000 4

ALUMINUM PLYWOOD CLIPDesign Features: Easy and fast, just slip over sheathing edge. Snug self-lock keeps clip firmly in position throughout panel placement. Eliminates unreliable wood edge blocking.

Materials: Aluminum extrusion

Footnote: With built in spacer

PERPLT

37

Page 41: SINGLE SOURCE SUPPLIER FOR BUILDING PRODUCTS · 2019. 7. 16. · single source supplier for building products technical support 1 (800) se-specs [737-7327]

STUCCO & PLASTER PRODUCTSS

TU

CC

O &

PL

AS

TE

R L

AT

H P

RO

DU

CT

S

ITEM DESCRIPTION SIZE PER CTN PER PLT

10509 CORNERBEAD CORNERITE 3”X3”X8’ 75 1125

CORNERITE INSIDE CORNERDesign Features: Finished edge corner lath provides reinforcement for plastered inner corners. Preshaped to 105% for a snug fit in 90% corners with wings tight against the plaster base.

Material: Galvanized Steel for corrosion resistance.

ITEM DESCRIPTION SIZE PER CTN PER PLT

10521 CASING BEAD 1/2”X10’ 30 600

CASING BEADDesign Features: Creates a flush stucco stop for framed doors, windows, and other openings. The casing are designed with a ridge of nail holes to provide easy installation.

Material: Galvanized Steel

ITEM DESCRIPTION LENGTH PER CTN PER PLT

10508 CORNER BEAD 8’ 40 800 10507 CORNER BEAD 10’ 30 630

EXPANDED CORNER BEADDesign Features: Expanded diamond mesh wings allow for keying the plaster right up to the nose of the bead. Provides plumb reinforcement at corners.

Material: Galvanized Steel for corrosion resistance.

LATH ACCESSORIES

38

Page 42: SINGLE SOURCE SUPPLIER FOR BUILDING PRODUCTS · 2019. 7. 16. · single source supplier for building products technical support 1 (800) se-specs [737-7327]

ST

UC

CO

& P

LA

ST

ER

LA

TH

PR

OD

UC

TS

39

ITEM DESCRIPTION MATERIAL SIZE PER CTN PER PLT

10519 EXPANSION JOINT VINYL 1/2” X 10’ 35 875

EXPANSION JOINT”M” type expansion providing mechanical keying to stucco membrane. Ideal for one coat systems.

ITEM DESCRIPTION MATERIAL SIZE PER CTN PER PLT

10515 CORNER BEAD VINYL 2-1/2” X 10’ 50 1250

CORNER BEAD Reinforces exterior corners with durable and straight corners.

VINYL LATH ACCESSORIES

Page 43: SINGLE SOURCE SUPPLIER FOR BUILDING PRODUCTS · 2019. 7. 16. · single source supplier for building products technical support 1 (800) se-specs [737-7327]

STUCCO & PLASTER PRODUCTSS

TU

CC

O &

PL

AS

TE

R L

AT

H P

RO

DU

CT

S

ITEM DESCRIPTION MATERIAL SIZE PER CTN PER PLT

10516 CASING BEAD VINYL 1/2” X 10’ 100 2500

CASING BEADUtilized to terminate stucco.

VINYL LATH ACCESSORIES

40

ITEM DESCRIPTION LENGTH PER CTN PER PLT10510 KAL-KORNER BEAD 10’ 60 1680

KAL-KORNER BEADDesign Features: Formed of galvanized steel to protect exterior corners with veneer plastering. Flange length 1-1/4”.

Page 44: SINGLE SOURCE SUPPLIER FOR BUILDING PRODUCTS · 2019. 7. 16. · single source supplier for building products technical support 1 (800) se-specs [737-7327]

ME

TAL

FR

AM

ING

PR

OD

UC

TS

1-5/8” DWS 25 1.625 1.25 0.08 .300 0.038 0.047 0.68 0.016 0.019 0.441 931 2-1/2” DWS 25 2.500 1.25 0.10 .360 0.100 0.080 1.01 0.018 0.021 0.432 1584 3-5/8” DWS 25 3.625 1.25 0.12 .440 0.235 0.129 1.41 0.020 0.022 0.415 2554 6” DWS 25 6.000 1.25 0.16 .600 0.783 0.261 2.19 0.023 0.023 0.376 5176

MAJOR AX IS MINOR AX ISRESISTINGMOMENT

DIMENSIONS(inches)

Area Wt. Ix Sx rx Iy Sy ryDESIGNATION.0179 Design Thickness A B (In.2) (Lb./Ft.) (In. 4) (In.3) (In.) (In.4) (In.3) (In.) (In./Lbs.)

ITEM WEB WIDTH LENGTHPER

BNDL

15962 1-5/8” 10’ 10 24015968 2-1/2” 8’ 10 24015966 2-1/2” 10’ 10 24015978 3-5/8” 8’ 10 18015970 3-5/8” 10’ 10 18015972 3-5/8” 12’ 10 18015974 3-5/8” 14’ 10 180

DRYWALL STUDSDesign Features: Roll-formed channel type non-bearing steel members used extensively for interior partitions. Outer flanges are knurled to prevent screw ride and to expedite attachment of gypsum wallboard. Studs are prepunched 24” O.C. to accomodate a snap in gromet for plumbing and electrical conduits. *Custom Lengths AvailableMaterial: 25 Gauge Galvanized Steel

DETAILED INSTALLATION PAMPHLET AVAILABLE

41

B

A

Section Properties

PERPLT

Page 45: SINGLE SOURCE SUPPLIER FOR BUILDING PRODUCTS · 2019. 7. 16. · single source supplier for building products technical support 1 (800) se-specs [737-7327]

METAL FRAMING PRODUCTSM

ETA

L F

RA

MIN

G P

RO

DU

CT

S

42

ITEM WEB WIDTH LENGTHPER

BNDL

Physical & Structural Properties

WEB W WT A Ix Sx Mx (in) (lb/ft) (in2) (in4) (in3) (in-k)

1-5/8” 0.230 0.068 0.024 0.022 0.4192-1/2” 0.286 0.084 0.065 0.043 0.8203-5/8” 0.358 0.105 0.162 0.078 1.311

DRYWALL TRACKDesign Features: Track is used to anchor the partition at floor and ceiling. Channel configuration formed with unhemmed legs sized to receive the corresponding size stud.

Material: 25 Gauge Galvanized Steel

Footnote: Studs available with or without pre-punched holes

ITEM DESCRIPTION SIZE PER BDL PER PLT

13194 HIGH HAT FURRING CHANNEL 7/8”X12’ 10 500

FURRING CHANNELDesign Features: Section designed for screw alignment of finished surface material in wall and ceiling furring.

Material: 25 Gauge Galvanized Steel

PERPLT

17036 1-5/8” 10’ 10 24017038 2-1/2” 10’ 10 24017040 3-5/8” 10’ 10 180

Page 46: SINGLE SOURCE SUPPLIER FOR BUILDING PRODUCTS · 2019. 7. 16. · single source supplier for building products technical support 1 (800) se-specs [737-7327]

HV

AC

TR

IM &

SH

EE

T M

ETA

L P

RO

DU

CT

S

43

CAN STOCKDesign Features: Can Stock is used to seal a return or supply framed HVAC opening. Also provides a lip to support the filter.

Material: HT Galvanized Steel

Footnote: 10’ Lengths

ITEM DESCRIPTION SIZE PER BDL PER PLT

13174 MOBILE HOME SKIRTING R/FACE 28”X60” 10 500

MOBILE HOME SKIRTINGDesign Features: Economical block embossed galvanized steel panels in an easy to handle size. The panels may be attached to a simple frame for mobile home skirting or utilized as a decorative wall covering.

Material: 26 Gauge Galvanized Steel

W H ITEM DESCRIPTION SIZE GAUGE CTN PER PLT

10725 CAN STOCK 4-7/8” CROWN HT 25 900

10719 CAN STOCK 4-1/2”1-1/4F 1/2OH CL HT 25 750

Page 47: SINGLE SOURCE SUPPLIER FOR BUILDING PRODUCTS · 2019. 7. 16. · single source supplier for building products technical support 1 (800) se-specs [737-7327]

HVAC TRIM & SHEET METAL PRODUCTSH

VA

C T

RIM

& S

HE

ET

ME

TAL

PR

OD

UC

TS

ALUMINUMITEM DESCRIPTION ALUM. SIZE

21492 FLAT SHEET .024 46.75”X10’ 20873 FLAT SHEET .032 47.75”X10’

GALVANIZEDITEM DESCRIPTION GALV. SIZE COLOR

26617 FLAT SHEET .010 35.75”X10’ 21571 FLAT SHEET .012 47.75”X10’ 26612 FLAT SHEET .0125 36”X10’ WHITE 16287 FLAT SHEET 26 36”X4’ 16306 FLAT SHEET 26 47.25”X10’ BLACK 16308 FLAT SHEET 26 47.25”X10’ BROWN 16310 FLAT SHEET 26 47.25”X10’ WHITE 16303 FLAT SHEET 26 48”X10’ 16343 FLAT SHEET 26 48”X10’ BROWN/WHITE 21139 FLAT SHEET 28 35.75”X10’ 16371 FLAT SHEET 29 40.88”X10’

ITEM DESCRIPTION GAUGE SIZE

27722 FLAT SHEET 24 22”X10’ 16251 FLAT SHEET 24 27.5”X10’ 26641 FLAT SHEET 24 43”X10’ 16271 FLAT SHEET 26 27.5”X10’ 16342 FLAT SHEET 26 42”X10’ 16341 FLAT SHEET 26 48”X10’ 15049 FLAT SHEET 29 27.5”X10’ 26619 FLAT SHEET 29 40.874”X10’

ZINC/ALUMINUM COATED

FLAT SHEETSDesign Features: Flat Sheet Metal available in various thicknesses and widths. Both in Galvanized Steel & Aluminum for multiple uses of flashing or “do it yourself projects.”

Material: Aluminum, Galvanized Steel, Zinc/Aluminum Coated

Footnote: Available Per Piece

44

Page 48: SINGLE SOURCE SUPPLIER FOR BUILDING PRODUCTS · 2019. 7. 16. · single source supplier for building products technical support 1 (800) se-specs [737-7327]

ST

OR

M P

AN

EL

PR

OD

UC

TS

IND

EX

ALUMINUM STORM PANELSDesign Features: Storm Panels protect window and door openings against hurricane storm damage resulting from wind born debris.• .063 Aluminum• Miami Dade County• Product Approval No. 01-0718.15• Aluminum: lightweight for easy assembly

Material: .063 Aluminum, Miami-Dade county approval, Pallet quantities vary

Footnote: Available Per Piece

W H ITEM DESCRIPTION SIZE QTY

16234 ALUM. STORM PANEL 44” 50 16235 ALUM. STORM PANEL 56” 50 16236 ALUM. STORM PANEL 68” 50 16237 ALUM STORM PANEL 86” 50 16238 Special Length Panels Per Inch ea

ALUMINUM PATIOSILL/ STUDDED ANGLE 106” ITEM 16199

Used to secure storm panels to walls for quick & easy removal or where fasteners are required. To be installed either up in the soffit framing or down into the patio or driveway.

TYPICAL .063 ALUMINUM PANEL

45

Page 49: SINGLE SOURCE SUPPLIER FOR BUILDING PRODUCTS · 2019. 7. 16. · single source supplier for building products technical support 1 (800) se-specs [737-7327]

IND

EX

INDEX

46

Insulation Support Wire .......................................37

J Bead ................................................................35

KAL-Korner Bead ................................................40

Lap Siding Starter Strip ......................................18

L Bead ................................................................36

Mobile Home Skirting .........................................43

PBR & R Panel Metal Roofing Panels ....................3

Pier Caps ............................................................29

Preformed Valley .................................................15

Preformed Valley Hemmed ..................................16

Preformed Tile Valley 24” Open Angle .................16

Rebar Safety Caps ..............................................30

Rebar..................................................................31

Residential Full Line Trims & Accessories .............2

Ridge Roll-Galvanized .........................................13

Rock-Lok ..............................................................5

Rod Chairs ..........................................................27

Roof Edge ...........................................................11

Sem-Lok Metal Roofing Panels .............................5

SM-Rib Metal Roofing Panels................................3

Soffit J Channel ..................................................19

Soffit System ......................................................19

Static Ventilators .................................................20

Step Flashing ........................................................8

Stucco Flashing ..................................................12

Termite Shield ....................................................32

Tie Wire ..............................................................27

Tin Caps .............................................................12

Turbine Ventilators ..............................................20

Valley Rolled .......................................................17

Venturi Vent ........................................................21

Verti-Lok Metal Roofing Panels .............................4

V Formed Valley ..................................................15

V Formed Valley Hemmed ...................................15

Universal Ridge Vent Aluminum ..........................22

Wall Tie ...............................................................32

Water Diverter ....................................................13

Weather Vent ......................................................24

Z Flashing ...........................................................14

5V -Crimp Metal Roofing Panels ...........................2

Aluminum Plywood Clip ......................................37

Aluminum Soffit-Strip .........................................21

Aluminum Storm Panels .....................................45

Aluminum Under-Eave Louver .............................23

Anchor Bolts & Washers .....................................28

Angle Flashing ......................................................7

Apron/Dormer Flashing .......................................12

Arched Corner Bead............................................34

Bar Ties ..............................................................29

Bar Tie Tools .......................................................30

Bullnose Corner Bead .........................................34

Can Stock ...........................................................43

Casing Bead (Vinyl Lath Accessories) ..................40

Casing Bead (Lath Accessories) ..........................38

Cavity Caps ........................................................30

Code Approval/Description Page ...........................1

Commercial Full Line Trims & Accessories ............4

Vinyl Corner Bead ...............................................36

Corner Bead (Vinyl Lath Accessories) ..................39

Cornerite Inside Corner (Lath Accessories) ..........38

Corrugated Metal Roofing Panels ..........................6

Dovetail Anchor ..................................................33

Drywall Studs .....................................................41

Drywall Track ......................................................42

Drywall Corner Bead ...........................................35

Eave Drip-Galvanized Steel ...................................9

Eave Drip-Aluminum ...........................................10

Expanded Corner Bead (Lath Accessories) ..........38

Expansion Joint (Vinyl Lath Accessories) .............39

Fascia Trim .........................................................18

Flat Sheets .........................................................44

Foundation Vents ................................................23

Furring Channel ..................................................42

Galvanized Bullnose Corner Bead .......................36

Galvanized Plywood Clip .....................................37

Galvanized Roof Jack..........................................26

Galvanized Shanty Cap .......................................26

Gooseneck Vent ..................................................25

H Molding ...........................................................19

Page 50: SINGLE SOURCE SUPPLIER FOR BUILDING PRODUCTS · 2019. 7. 16. · single source supplier for building products technical support 1 (800) se-specs [737-7327]

NOTES

Southeastern Metals Technical Support: (800) SE Specs (737 - 7327) • www.semetals.com

SALES: (800) 874-0335 • FAX (904) 696-2511

IND

EX

Page 51: SINGLE SOURCE SUPPLIER FOR BUILDING PRODUCTS · 2019. 7. 16. · single source supplier for building products technical support 1 (800) se-specs [737-7327]

gibraltar1.com(800) 777-0675

Technical Support: (800) SE Specs (737 - 7327) • www.semetals.comSALES: (800) 874-0335 • FAX (904) 696-2511

TOTAL QUALITY

Total control over every aspect of productionThe industry standard for quality in every product line

Low return and callback records

SERVICE EXCELLENCE

On-time delivery is a givenManufacturing expertise means short lead times

Integrated Customer Service Centers answer questions promptlyComplete network of trained factory representatives

State-of-the-art manufacturing facilitiesThe most comprehensive product lines in the industry

Broad range of materials to match any needEvery product engineered for its application

Flexibility and custom manufacturing

SUPERIOR MANUFACTURING& ENGINEERING

SEMCO MISSION STATEMENT

“Forming the Future”

We are committed to providing quality productsat competitive prices delivered on time with

unsurpassed service.

We will accomplish this through an ongoing committment to fostering integrity, dedication, responsibility

and pride among our team members.

Page 52: SINGLE SOURCE SUPPLIER FOR BUILDING PRODUCTS · 2019. 7. 16. · single source supplier for building products technical support 1 (800) se-specs [737-7327]

SOUTHEASTERN METALS LOCATIONS

JACKSONVILLE11801 Industry Drive • Jacksonville, FL 33218

MIAMI7265 NW 74th Street • Medley, FL 33166

LAKELAND4950 S. Frontage Road • Lakeland, FL 33815

ATLANTA3025 Sylvan Road • Hapeville, GA 30352

SOUTHEASTERN METALS

SALES: (800) 874-0335 • FAX (904) 696-2511


Recommended