T h e D e n t a l C o m p a n y
02 | 03
Sirona CAD/CAM materials
Top quality geared to challenging applications.
CAD/CAM SYSTEMS | INSTRUMENTS | HYGIENE SYSTEMS | TREATMENT CENTERS | IMAGING SYSTEMS
T h e D e n t a l C o m p a n y
02 | 03
CEREC Stone BC modeling material – a highlight set in stone. In combination with CEREC Bluecam the super-hard (Type IV) CEREC Stone BC allows you to create high-precision scannable models.
n Developed exclusively for use with CEREC Bluecamn Optimal optical properties including brightness and contrastn No powdering required
CEREC Optispray – precision at the touch of a button.
In combination with the CEREC Bluecam, CEREC Optispray speeds up and simplifies the acquisition of digital impressions. At the same time it also delivers unprecedented levels of precision.
Practical experience is hard to beat.
n Much easier to use than conventional scanning powdern Preparation at the touch of a button – quick, simple, precise, hygienicn The ultrathin, homogeneous coating enhances the imaging performance of the CEREC
Bluecam, especially with regard to the preparation margins n CEREC Optispray is water-soluble and easy to remove with the SPRAYVIT syringen Practical 50 or 200 ml spray cans with special nozzles for uniform dosage
Dental professionals and patients are unanimous: metal restorations should be avoided if at all possible. By contrast, all-ceramic materials offer outstanding benefits. They are biocompatible, display enamel-like mechanical properties and allow you to conserve the natural tooth tissue. Enjoy every day. With Sirona.
All-ceramic restorations fabricated on Sirona’s CAD/CAM systems have been proven many millions of times for more than 25 years. And we are continuously working to expand the spectrum of clinical indications, thus ensuring that more patients than ever before gain access to state-of-the-art aesthetic dentistry. In this context we have developed a range of high-performance materials that deliver excellent precision and are perfectly matched to Sirona’s innovative CAD/CAM software and milling machines.
Original materials with the Sirona Best Quality Label
Best QualityLabel
Sirona Best Quality Label Guarantee:n High-performance materials for maximum milling and precision requirementsn Individual milling parameters for each materialn Unlimited compatibility with Sirona’s milling unitsn Direct material selection in the inLab and CEREC softwaren Materials are optimally compatible with the milling process for high-quality restorations
Every inCoris package now includes a labeling set allowing the dental technician
to demonstrate to the dentist or patient that only premium materials were used.
Col
or s
hade
s n
ot b
indi
ng.
04 | 06
Individual zirconium oxide abutments. Sintering speed second to none.
The demand for highly aesthetic full ceramic restorations is growing, as well as the wish for tooth colored, natural looking restorations on implants. Thanks to the integration of customized zirconium oxide abutments into the already proven inLab CAD/CAM system, you can start today with in-house production.
inCoris ZI meso – customized zirconium oxide abutmentsn Special-purpose zirconium oxide blocks available in two different shades (F0.5 and F2) and sizes (S and L) with a prefabricated screw channel and anti-rotation devicen Matching Sirona scanbodies for various implant sizes facilitate the scanning of laboratory implantsn Design using the inLab softwaren Produced on the MC XL milling unitn After sintering, the ceramic is bonded to the prefabricated titanium basen Time savings in comparison with centralized production
Overview of available implant systems
Manufacturer System
Nobel Biocare Replace, Branemark, Nobel Active
Straumann Tissuelevel, Bone Level
Astra Tech OsseoSpeed
Friadent Frialit
Biomet 3i Ex. Hex, Certain
Zimmer Tapered Screw-Vent
Medentika Implant M-Implant Tapered
CAMLOG CAMLOG
Alphatech Tube Line
inCoris ZI meso color scheme
F 0.5 F 2
CAD/CAM materials for your practice CAD/CAM materials for your laboratory inFire HTC speed
The CEREC Blocs and CEREC Blocs PC consist of a finely structured feldspar ceramic material, which is biocompatible and resembles natural tooth enamel in terms of its shading, strength and abrasion resistance. It is the ideal material for tissue-conserving, aesthetic chairside restorations.
The new inFire HTC speed high-temperature furnace speeds up the processing of frameworks and crown copings. The new high-speed sintering programs deliver time savings of up to 75 percent. This is the direct result of technologically enhanced heating elements, insulation materials and sintering trays. Thanks to its outstanding productivity, the inFire HTC speed is the ideal complement to the inLab system.
True beauty comes from within.
CEREC Blocs/CEREC Blocs PC – product range and shade system
CEREC Blocs – for enamel-like inlays, onlays, veneers and anatomically sized crowns n Enamel-like abrasion resistancen Pronounced translucency and chameleon effectn Very good polishing characteristicsn Available in an extensive range of shades
The benefits for youThe CEREC shade system helps you achieve the right color matching. It combines the simplicity of the VITA Classical system and the diversity of the 3D Master system. Color matching is easier than ever before thanks to the CEREC Blocs Shade Guide with its selection of real-life samples.
The CEREC Blocs Shade GuideThe CEREC Blocs Shade Guide contains 12 samples taken from original CEREC Blocs. Each sample is labelled with Sirona’s own shade designation, as well as the corresponding VITA 3D Master and VITA Classical shades.
Time and cost benefits:n Rapid 90-minute sintering of zirconium oxide restorationsn Very high productivity with up to 5 additional sintering processes per working day due to a reduction of up to 75% of the sintering time n Complete fabrication of veneered multilayer bridges within a single day n Timer function for overnight sinteringn Enhanced energy efficiency thanks to significantly shorter heating and cooling times (4 kWh instead of 10 kWh)
Simple and versatile: n Choice of high-speed and standard sintering programsn Program presets for Sirona, VITA Zahnfabrik and ivoclar vivadent ceramic materialsn Two additional high-speed sintering programs for inCoris ZI speed and VITA In-Ceram YZ speedn 12 additional presets for user-defined sintering programs (prolonged and high-speed) n Four sintering programs with pre-drying and ventilation
Technical data inFire HTC speed
Dimensions (W x H x D) in mm 500 x 802 x 565 Furnace chamber n Diameter 130 mmn Height 80 mm
Weight 80 kg Compatible materials n Zirconium oxiden Colored zirconium oxiden Aluminium oxide
Power supply 200 V–240 V Options n Fast sinteringn Pre-drying
Mains frequency 50/60 Hz Interface RS 232 (Service)
Input 3.600 VA
Col
or s
hade
s n
ot b
indi
ng.Color Size Size
CEREC Blocs CEREC Blocs PC
8 10 12 14 40 PC12 PC14 PC14/14 PC40
S2-T / S3-T / S4-T n n n n
S0-M n n
S1-M / S2-M / S3-M / S4-M / S5-M
n n n n
S2-0 / S3-0 / S4-0 n n n n
S2-PC / S3-PC / S4-PC n n n n n
CEREC Blocs PC – polychromatic material for natural-looking anterior and posterior crownsn Natural enamel-dentine-cervix layeringn CEREC Blocs PC can be virtually aligned in the milling preview
of the CEREC and inLab 3D softwaren Interesting alternative to ceramic-faced crowns
The right choicen So far more than 20 million restorations have been created out
of finely structured feldspar ceramic blocksn Long-term studies have demonstrated that 95–97% of the
crowns are still intact after four years[1] n After 10 years the clinical survival rate of inlays and onlays is
between 90 and 95%[2]
Multilayern The complete digital fabrication of framework and veneering
structure for crowns and bridges with the inLab software and MC XL milling unit
n CEREC Blocs (mono and polychromatic) up to size 40 mm for the veneering structure
n Fast and cost-effective alternative to pressing or veneeringn Aesthetic advantage with veneering block with natural color
gradientn Increased security from chipping due to clinically proven
homogenous ceramics
S4-T (3M1C)
S3-T (2M1C)
S2-T (1M1C)
S4-M(3M2C)
S3-M(2M2C)
S2-M(1M2C)
S1-M(A1C)
S4-O(3M3C)
S3-O(A3C)
S2-O(A2C)
S0-M(0M1C)
S4-PC(3M2C)
S3-PC(2M2C)
S2-PC(1M2C)
Ligh
tnes
s
Chroma
S5-M(4M2C)
07 | 09
*Applicable only for inCoris ZI. inCoris TZI is only approved for full anatomical restorations.
[1] Source: Otto T, Computer-Aided Direct All-Ceramic Crowns: 4 Year Results. In Mormann WH (ed.) State of the Art of CAD/CAM Restorations,20 Years of CEREC, Berlin: Quintessence, 2006: Poster[2] Source: Reiss B, Eighteen-Year Clinical Study in a Dental Practice. In Mormann WH (ed.) State of the Art of CAD/CAM Restorations, 20 Years of CEREC, Berlin: Quintessence, 2006: 57–64
Technical details
inCoris TZI – translucent zirconium oxiden Highly translucent zirconium oxide for full crowns and
bridges with up to five unitsn Ideal for critical situations, e.g. where there is limited space
between the restoration and the antagonistn Resistant to chippingn Available in three block sizes und color FOn Available in 16 inCoris TZI Coloring Liquids for individual
shading of the restoration
inCoris ZI – zirconium oxide for high-strength bridge frameworksn High-performance ceramic material for finely designed
long-span frameworksn High translucency fulfils stringent aesthetic requirementsn Outstanding fracture strength and longevityn Excellent biocompatibilityn Easy to machine thanks to high sintered density and small
particle sizen Available in various sizes and in five different shades
Enhanced cost-effectiveness – inLab 3D Stack softwaren Several milling jobs can be placed within a single block
saving time and material costsn Partly used blocks can be deployed at a later daten inLab 3D Stack is suitable for reduced designs and frame-
works of all kinds – and for milling on inLab MC XL
The central production models are fabricated from acrylic resin in a
stereolithography SLA process. They are then pinned on model plates and
sent to the lab within a few working days.
The individual model segments complete with pin holes are accurately
milled in the inLab MC XL. Then the model is attached to the base plate.The Sirona inCoris ZI and inCoris AL materials are the ideal basis for the cost-effective fabrication of high precision ceramic restorations – e.g. finely designed copings, bridge frameworks and custom abutments. Excellent biocompatibility goes hand in hand with perfect aesthetics.
Optical digital impressions with Sirona Connect are an innovative, precise alternative to conventional dental impressions. The intraoral digital data are calculated to create a 3D model and sent directly via internet to a dental laboratory of choice. Two possibilities for manufacturing physical models offer the dental laboratory additional flexibility for restorations: centrally produced or in-house with a milling unit.
Central Model ProductionThe laboratory sends the 3D model data received from the dentist to Sirona’s central model production. Valuable working time which was previously used for cleaning the conventional impres-sion, pouring materials, capping, setting the pins, cutting the stone model and placement of model segments is thereby saved. The model is made out of an acrylic synthetic resin using an SLA stereolithography production process.
Your benefitsn More robust than a stone model: will not break when droppedn More abrasive resistant than a stone model: the prepped tooth
form will not be affected by the restoration being put-on or taken-off.
n Already segmented: every prepared stump is a separate segmentn Already pinned to the base plate: similar to existing model
processes
Models with the new inLab MC XLAn interesting alternative to centrally produced models are those which are milled in-house with the inLab MC XL milling unit. Dental laboratories are now able to control the entire digital process from the receipt of digital impressions and model milling to the CAD/CAM creation of the restoration. It is also possible to scan conventional elastomer impressions and create models from the data.
Your benefitsn Integrated digital workflow from impression to model and
restoration creationn Particularly well suited for the production of partial jaw
models for single tooth restorations or smaller bridges in the posterior region
n Maximum flexibility by processing digital impressions via in-house milling and complete control over the model production process
inCoris ZI product range
Size inCoris ZI (L x W x H in mm) inLab inLab MC XL
mono S 14 x 13 x 13 n n
mono L 20 x 19 x 15,5 n n
40 x 19 x 15 n n
55 x 19 x 15 n
65 x 25 x 22 n
maxi S 65 x 40 x 17 n
maxi L 85 x 40 x 22 n
meso S (for abutments) n
meso L (for abutments) n
In-house model millingCAD/CAM materials for your laboratory
From digital impressions to a model.The optimum solution for frameworks.
Col
or s
hade
s n
ot b
indi
ng.
Good to know.
CEREC Blocs inCoris ZI/inCoris TZI
Milling units CEREC 3 inLab CEREC MC XL inLab MC XL
Step Bur 10, Cylinder Pointed BurStep Bur 12, Cylinder Pointed BurStep Bur 12 S, Cylinder Pointed Bur 12 SStep Bur 12 S, Cylinder Pointed Bur 12 S
Cylinder Pointed Bur
Step Bur 20, Cylinder Pointed Bur 20
Restoration design InlaysOnlaysVeneersPartial crownsAnterior and posterior crowns
Copings and bridge frameworks*Abutments*Telescopes*Bars and attachments*
Trimming Only use diamond burs Contour using fine grained diamond abrasives (40 µm)
and pre-polish with 8 µm diamond finishing burs
When sintered use only a water-cooled handpiece (ca. 2.5–3 bar) or rubber polishers (low speed)
Characterization Polishing
Glazing
Shading and glazing
Veneering
Polish CEREC Blocs using flexible aluminium oxide (Al2O3) coated discs, polishing brushes and diamond paste. Ensure ample water cooling and apply only gentle pressure.
As an alternative to polishing, the restoration can be glazed and then atmospherically fired in order to create a high gloss finish. This process can be delegated to your assistant.
To achieve particularly aesthetic results you can characterize the CEREC Bloc restorations with the VITA SHADING PASTES.
CEREC Bloc restorations with thermal expansion coefficient 9.4 X 10–6/K can be veneered locally using an appropriate ceramic material. This enables you to achieve outstanding results particularly in the anterior region.
–
–
After coloration using an inCoris TZI Coloring Liquid, the inCoris TZI restorations can be characterized with the aid of conventional shading and glazing methods.
Veneer using ceramic materials for use in combination with inCoris ZI (e.g. VITA VM 9)
Bonding Adhesive (Self-adhesive or dual bonding)
Use conventional (glass ionomer or zinc phosphate cements) or self or dual curing adhesives
Composition SiO2 56–64% weightAl2O3 20–23% weightNa2O 6–9% weightK2O 6–8% weight CaO 0.3–0.6% weightTiO2 0.0–0.1% weight
ZrO2 + Y2O3 + HfO2 > 99 %Al2O3 < 0,5 %Other oxide < 0.5 %
Thermal expansion coefficient 9.4 X 10–6/K 11.0 X 10–6/K
Flexural strength 150 MPa 1200 MPa
F 0.5 F 1 F 2
inCoris ZI color scheme
F 3
F 0
inCoris TZI color scheme
Best QualityLabel
Every inCoris package now includes a labeling set allowing the dental
technician to demonstrate to the dentist or patient that only premium
materials were used.
Sirona – unique worldwide systems expertise in dental equipment productsSirona develops and manufactures a comprehensive range of dental equipment, including CAD/CAM Systems for dental practices (CEREC) and laboratories (inLab), Instruments and Hygiene Systems, Treatment Centers and Imaging Systems. Sirona manufactures high technology products that guarantee ease of use and a high return on investment – for the good of your practice and for the benefit of your patients. In this way, you can approach every challenge you face with confidence. Enjoy every day. With Sirona.
CAD/CAM SYSTEMS | INSTRUMENTS | HYGIENE SYSTEMS | TREATMENT CENTERS | IMAGING SYSTEMS
Sirona Dental Systems · E-mail: [email protected] · www.sirona.com
Subj
ect t
o te
chni
cal c
hang
es a
nd e
rror
s in
the
text
, Ord
er N
o. A
9110
0-M
43-B
191-
01-7
600,
Prin
ted
in G
erm
any,
Disp
o-N
r. 04
605,
JP12
-024
WS
0212
X.V0
