2
Additional AC and DC input cables are available. Visit our website for more details, http://www.bren-tronics.com Turn over page for details on multiple outputs OUTPUTS Data presented in this document is subject to change without notice. 6-PACK vB BREN BREN - - TRONICS 1.8 kWh PORTABLE POWER SYSTEM TRONICS 1.8 kWh PORTABLE POWER SYSTEM Systems requiring significant amounts of energy are usually powered by generators or by constantly replacing batteries. The 6-PACK is an energy source comprised of six (6) BB-2590/U batteries packed into a rugged, watertight container with an integrated battery management system. INPUT EQUIPMENT OTHER INPUTS PORTABLE POWER SYSTEM INPUT CORDS ACCESSORIES OUTPUTS BTP-70227-T 124 WATT SOLAR PANEL Also suitable for use with small portable charge controllers BTP-70889 WIND TURBINE BTP-70889M MAST At speeds of 30 mph, it can provide over 250 watts and up to 700W of power WIND TURBINE AND MAST WITH 124 WATT SOLAR PANNELS TACTICAL VEHICLE 12V POWER SOURCE 90V-264V AC, 250VA BTE-70791A-T1B 6-PACK BTA-70857-2B SOLAR INPUT CABLE Connects 3 solar panels to the DC input of 6-PACK BTA-70893-2 SOLAR INPUT CABLE Connects to the Power Conditioner and will accept up to 3 solar panels BTJ-70893-T1 POWER CONDITIONER Converts raw power from the wind and solar panels simultaneously to provide a DC input usable by the 6-PACK BTA-70835B NATO, 24V DC CABLE BTA-70893-1 CONDITIONER OUTPUT CABLE Connects the Power Conditioner to the DC input of the 6-PACK Depending on the power consumption, the 6-PACK can provide continuous energy for over one week in stand alone mode, or indefinite operation when connected to a renewable energy source (e.g., wind, solar, etc). BTA-70856-1B DC CABLE BTA-70864-2 AC CABLE
