ZXUR 9000 GSMBase Station Controller
Radio Parameter Reference
Version: V6.50.102
ZTE CORPORATIONNo. 55, Hi-tech Road South, ShenZhen, P.R.ChinaPostcode: 518057Tel: +86-755-26771900Fax: +86-755-26770801URL: http://ensupport.zte.com.cnE-mail: [email protected]
LEGAL INFORMATIONCopyright 2013 ZTE CORPORATION.
The contents of this document are protected by copyright laws and international treaties. Any reproduction or
distribution of this document or any portion of this document, in any form by any means, without the prior written
consent of ZTE CORPORATION is prohibited. Additionally, the contents of this document are protected by
contractual confidentiality obligations.
All company, brand and product names are trade or service marks, or registered trade or service marks, of ZTE
CORPORATION or of their respective owners.
This document is provided as is, and all express, implied, or statutory warranties, representations or conditions
are disclaimed, including without limitation any implied warranty of merchantability, fitness for a particular purpose,
title or non-infringement. ZTE CORPORATION and its licensors shall not be liable for damages resulting from the
use of or reliance on the information contained herein.
ZTE CORPORATION or its licensors may have current or pending intellectual property rights or applications
covering the subject matter of this document. Except as expressly provided in any written license between ZTE
CORPORATION and its licensee, the user of this document shall not acquire any license to the subject matter
herein.
ZTE CORPORATION reserves the right to upgrade or make technical change to this product without further notice.
Users may visit ZTE technical support website http://ensupport.zte.com.cn to inquire related information.
The ultimate right to interpret this product resides in ZTE CORPORATION.
Revision History
Revison No. Revision Date Revision Reason
R1.0 2012-12-21 First edition
Serial Number: SJ-20121227135800-015
Publishing Date: 2012-12-21 (R1.0)
SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential
ContentsAbout This Manual ......................................................................................... I
Chapter 1 Overview.................................................................................... 1-1
1.1 Introduction to BSS Radio Parameters................................................................. 1-1
1.2 The Format to Explain Parameters ...................................................................... 1-2
1.3 Precautions on Parameter Adjustment................................................................. 1-4
Chapter 2 GSM Radio Parameters ............................................................ 2-1
2.1 GSM Logical Configuration(GBssFunction) .......................................................... 2-2
2.1.1 User Label ............................................................................................... 2-2
2.1.2 BSS ID .................................................................................................... 2-3
2.1.3 Managed Object Description ..................................................................... 2-4
2.1.4 BSC Sequence ........................................................................................ 2-5
2.1.5 Load indication allowed ............................................................................ 2-6
2.1.6 Load indication Valid Time ........................................................................ 2-7
2.1.7 Load Indication Period .............................................................................. 2-8
2.1.8 Send assignment failure allowed in outer direct retry procedure .................. 2-9
2.1.9 TFO Enable ........................................................................................... 2-10
2.1.10 Report voice quality .............................................................................. 2-12
2.1.11 R99 Ind................................................................................................ 2-13
2.1.12 DCS1800/PCS1900 support.................................................................. 2-14
2.1.13 External cell load notify ......................................................................... 2-15
2.1.14 Neighbor cell load valid duration............................................................ 2-16
2.1.15 Pre-Access Control for IP Transmission ................................................. 2-17
2.1.16 Using load information provided by CRRM ............................................. 2-17
2.1.17 Automatic Resource Indication Threshold .............................................. 2-18
2.1.18 Access class parameter config select .................................................... 2-20
2.1.19 First barred class.................................................................................. 2-21
2.1.20 Barred class windows ........................................................................... 2-22
2.1.21 Barred time step................................................................................... 2-23
2.1.22 Access Control ..................................................................................... 2-24
2.1.23 Paging repeat number .......................................................................... 2-25
2.1.24 Congestion Threshold for Send Load Indication...................................... 2-26
2.1.25 Forbid Handover According to Resource Threshold of Load Indication ..... 2-27
2.1.26 Resource Threshold of Load Indication for Forbid Handover ................... 2-28
I
SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential
2.1.27 Force FACCH....................................................................................... 2-29
2.1.28 Use system message method when MSC over loaded or link blocked...... 2-30
2.1.29 Start system message method for CPU overload.................................... 2-32
2.1.30 Start FUC flow control for CPU overload ................................................ 2-33
2.1.31 The maximum control level for MSC overload or link block ...................... 2-34
2.1.32 Start limit of system message method for CPU overload ......................... 2-35
2.1.33 Start limit of FUC flow control for CPU overload...................................... 2-36
2.1.34 B2 support AMR................................................................................... 2-37
2.1.35 Enable power dynamic sharing.............................................................. 2-38
2.1.36 Power congest delay ............................................................................ 2-39
2.1.37 Time interval of channel power adjustment based on power dynamic
sharing ................................................................................................. 2-40
2.1.38 If paging flow control due to high CPU ................................................... 2-41
2.1.39 CPU threshold of paging flow control ..................................................... 2-42
2.1.40 Radio pre-access procedure switch ....................................................... 2-43
2.1.41 Transport Pre-Access Flag.................................................................... 2-44
2.1.42 The switch of sending Immediate assign message and radio channel
activating synchronously........................................................................ 2-45
2.1.43 FO report for CS................................................................................... 2-46
2.1.44 FO report for PS................................................................................... 2-47
2.1.45 FO report for DBS ................................................................................ 2-48
2.1.46 Inter BSC handover out on SDCCH permitted ........................................ 2-48
2.1.47 The switch of connection and radio channel activating synchronization ..... 2-50
2.1.48 Use BER to average quality .................................................................. 2-51
2.1.49 Check IMSI when access...................................................................... 2-52
2.1.50 Include BTS power in MR ..................................................................... 2-53
2.1.51 Measurement Result Recording Interval in MSC Invoke Trace................. 2-54
2.1.52 Preprocessed Measurement Result Recording Interval in MSC Invoke
Trace ................................................................................................... 2-55
2.1.53 Enhanced and Preprocessde MR report................................................. 2-56
2.1.54 Preferred speech version for FR............................................................ 2-57
2.1.55 Preferred speech version for HR ........................................................... 2-58
2.1.56 Dynamic HR support indication.............................................................. 2-59
2.1.57 HR channel fragment finishing support................................................... 2-60
2.1.58 BCCH switch allowed ........................................................................... 2-61
2.1.59 Dynamic configuration SDCCH.............................................................. 2-62
2.1.60 Scan SDCCH....................................................................................... 2-63
2.1.61 Scan BCCH ......................................................................................... 2-64
II
SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential
2.1.62 BCCH starting delay ............................................................................. 2-65
2.1.63 BCCH finishing delay............................................................................ 2-66
2.1.64 TCH->SDCCH limit............................................................................... 2-67
2.1.65 SDCCH->TCH delay............................................................................. 2-68
2.1.66 Minimum Tch reserved for dynamic SDCCH........................................... 2-69
2.1.67
Baseband frequency hopping
TRX exchange support
............................................................................................................ 2-70
2.1.68 The method of intelligent TRX poweroff.................................................. 2-72
2.1.69 IBS shutdown limit ................................................................................ 2-73
2.1.70 IBS powerup limit ................................................................................. 2-73
2.1.71 IBS powerover limit............................................................................... 2-74
2.1.72 IBS power priority ................................................................................. 2-75
2.1.73 BCCH forbidden TS merger time bitmap ................................................ 2-76
2.1.74 The master power control option of intelligent TRX poweroff system ........ 2-77
2.1.75 Baseband resource share support ......................................................... 2-78
2.1.76 TRX Selection priority for baseband share ............................................. 2-79
2.1.77 Number of BA Ranges ......................................................................... 2-80
2.1.78 BA Range Lower ................................................................................. 2-81
2.1.79 BA Range Higher ................................................................................. 2-82
2.1.80 If get Utran classmark information from UE ............................................ 2-83
2.1.81 IPA AMR start mode ............................................................................. 2-84
2.1.82 Send OVERLOAD message to MSC...................................................... 2-85
2.1.83 Use Load of Subcell1 as Load of Cell .................................................... 2-86
2.1.84 Enough MS MR For Connection Failure After Handover.......................... 2-87
2.1.85 Ts Block Alarm Switch .......................................................................... 2-88
2.1.86 BVC Block Alarm Switch ....................................................................... 2-89
2.1.87 AMR full Active Codec Set(4.75kbps) .................................................... 2-90
2.1.88 AMR full Active Codec Set(5.15kbps) .................................................... 2-91
2.1.89 AMR full Active Codec Set(5.9kbps) ...................................................... 2-92
2.1.90 AMR full Active Codec Set(6.7kbps) ...................................................... 2-93
2.1.91 AMR full Active Codec Set(7.4kbps) ...................................................... 2-93
2.1.92 AMR full Active Codec Set(7.95kbps) .................................................... 2-94
2.1.93 AMR full Active Codec Set(10.2kbps) .................................................... 2-95
2.1.94 AMR full Active Codec Set(12.2kbps) .................................................... 2-96
2.1.95 AMR Half Active Codec Set(4.75kbps)................................................... 2-97
III
SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential
2.1.96 AMR Half Active Codec Set(5.15kbps)................................................... 2-98
2.1.97 AMR Half Active Codec Set(5.9kbps)..................................................... 2-99
2.1.98 AMR Half Active Codec Set(6.7kbps)....................................................2-100
2.1.99 AMR Half Active Codec Set(7.4kbps)....................................................2-101
2.1.100 Thresholds of AMR FR 1....................................................................2-102
2.1.101 Thresholds of AMR FR 2....................................................................2-103
2.1.102 Thresholds of AMR FR 3....................................................................2-104
2.1.103 Thresholds of AMR FR 4....................................................................2-105
2.1.104 Thresholds of AMR FR 5....................................................................2-107
2.1.105 Thresholds of AMR FR 6....................................................................2-108
2.1.106 Thresholds of AMR FR 7....................................................................2-109
2.1.107 Thresholds of AMR HR 1 ...................................................................2-110
2.1.108 Thresholds of AMR HR 2 ................................................................... 2-111
2.1.109 Thresholds of AMR HR 3 ...................................................................2-112
2.1.110 Thresholds of AMR HR 4....................................................................2-113
2.1.111 Thresholds of AMR HR 5....................................................................2-114
2.1.112 Hysteresis of AMR FR 1.....................................................................2-115
2.1.113 Hysteresis of AMR FR 2.....................................................................2-117
2.1.114 Hysteresis of AMR FR 3.....................................................................2-118
2.1.115 Hysteresis of AMR FR 4.....................................................................2-119
2.1.116 Hysteresis of AMR FR 5.....................................................................2-120
2.1.117 Hysteresis of AMR FR 6.....................................................................2-122
2.1.118 Hysteresis of AMR FR 7.....................................................................2-123
2.1.119 Hysteresis of AMR HR 1.....................................................................2-124
2.1.120 Hysteresis of AMR HR 2 ....................................................................2-125
2.1.121 Hysteresis of AMR HR 3 ....................................................................2-126
2.1.122 Hysteresis of AMR HR 4 ....................................................................2-128
2.1.123 Hysteresis of AMR HR 5 ....................................................................2-129
2.1.124 Enable AMR FR noise control.............................................................2-130
2.1.125 AMR FR Initial codec mode................................................................2-131
2.1.126 AMR FR Start mode ..........................................................................2-132
2.1.127 Enable AMR HR noise control ............................................................2-133
2.1.128 AMR HR Initial codec mode ...............................................................2-134
2.1.129 AMR HR Start mode ..........................................................................2-135
2.1.130 Hysteresis of AMRWFS 1...................................................................2-136
2.1.131 Hysteresis of AMRWFS 2...................................................................2-138
2.1.132 Hysteresis of AMRWFS 3...................................................................2-139
IV
SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential
2.1.133 Hysteresis of AMRWFS 4...................................................................2-140
2.1.134 Hysteresis of AMROWFS 1 ................................................................2-141
2.1.135 Hysteresis of AMROWFS 2 ................................................................2-142
2.1.136 Hysteresis of AMROWHS 1................................................................2-144
2.1.137 Hysteresis of AMROWHS 2................................................................2-145
2.1.138 Thresholds for AMRWFS 1.................................................................2-146
2.1.139 Thresholds for AMRWFS 2.................................................................2-147
2.1.140 Thresholds for AMRWFS 3.................................................................2-148
2.1.141 Thresholds for AMRWFS 4.................................................................2-150
2.1.142 Thresholds for AMROWFS 1 ..............................................................2-151
2.1.143 Thresholds for AMROWFS 2 ..............................................................2-152
2.1.144 Thresholds for AMROWHS 1..............................................................2-153
2.1.145 Thresholds for AMROWHS 2..............................................................2-154
2.1.146 Busy threshold of sub cell ..................................................................2-155
2.1.147 Support of SON Transfer Application ..................................................2-156
2.1.148 Circuit data handover control..............................................................2-157
2.1.149 Cell Bar when A break .......................................................................2-158
2.1.150 VAMOS II prior to pair with non saic UE ..............................................2-159
2.1.151 Send Paging CS on CCCH or not when PS instance exists ..................2-160
2.1.152 If support mute call detect ..................................................................2-162
2.1.153 P value of MUTE SAIC MS capability detection ...................................2-163
2.1.154 N value of SAIC AFC MS capability detection ......................................2-163
2.1.155 N value of MUTE SAIC MS capability detection ...................................2-164
2.1.156 Whether using Frequency List describe channel frequency hopping of
assignment command ..........................................................................2-165
2.1.157 P value of SAIC AFC MS capability detection ......................................2-166
2.2 BSS Function Timer(GBssFunctionTimer) .........................................................2-167
2.2.1 BSS Function Timer ID ..........................................................................2-167
2.2.2 Protective time waiting for access...........................................................2-168
2.2.3 Protection time for link establishment response .......................................2-169
2.2.4 SAPI3 link establishment time ................................................................2-170
2.2.5 Protective time that responses external handover completion
message .............................................................................................2-171
2.2.6 External handover protective time ..........................................................2-173
2.2.7 Protective time for RF channel release ...................................................2-174
2.2.8 Starting time for oriented retry ................................................................2-175
2.2.9 Encryption mode modification time .........................................................2-176
2.2.10 Mode modification process time ...........................................................2-177
V
SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential
2.2.11 Continue timer for mode modify ............................................................2-178
2.2.12 First overload period of flow traffic control .............................................2-179
2.2.13 Second overload period of flow traffic control.........................................2-180
2.2.14 Immediate assignment period...............................................................2-181
2.2.15 Handover period of source cell .............................................................2-182
2.2.16 Assignment period...............................................................................2-184
2.2.17 TCH Channel release period ................................................................2-185
2.2.18 TCH Channel deactivation delay ..........................................................2-186
2.2.19 RLSD message receive protection timer ...............................................2-187
2.2.20 Channel activation protection timer .......................................................2-188
2.2.21 MSC clear command protection timer ...................................................2-189
2.2.22 SCCP connection protection timer ........................................................2-190
2.2.23 Time of micro-micro handover delay .....................................................2-191
2.2.24 TFI and USF release timer ...................................................................2-192
2.2.25 TBF release timer................................................................................2-194
2.2.26 TBF protect time when radio link failure ................................................2-195
2.2.27 Bvc block/unblock retry time.................................................................2-196
2.2.28 Bvc reset retry time..............................................................................2-198
2.2.29 Suspend retry time ..............................................................................2-199
2.2.30 Resume retry time ...............................................................................2-200
2.2.31 Access capability update retry time.......................................................2-202
2.2.32 PFC creating retry time ........................................................................2-203
2.2.33 PFC modifying retry time......................................................................2-204
2.2.34 Supervision Timer of LCS ....................................................................2-205
2.2.35 Radio Timer of LCS .............................................................................2-206
2.2.36 LCS wait intra BSS handover timer.......................................................2-207
2.2.37 PS channel delay release timer ............................................................2-208
2.2.38 Ater wait SCCP connection timer..........................................................2-209
2.2.39 Ater wait resource acknowledge timer...................................................2-210
2.2.40 Ater wait resource timer .......................................................................2-212
2.2.41 Ater wait resource release timer ...........................................................2-213
2.2.42 Ater handover monitor timer .................................................................2-214
2.2.43 HO performed ack timer.......................................................................2-215
2.2.44 RIR Timer ...........................................................................................2-216
2.2.45 RI Timer..............................................................................................2-217
2.2.46 RIAE Timer .........................................................................................2-218
2.2.47 Time to wait A handover request ..........................................................2-219
VI
SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential
2.2.48 Timer to wait a relocation commit MSG from RNC .................................2-220
2.2.49 Timer of TRAU frame Synchronization ..................................................2-221
2.2.50 Guards the PS handover required procedure ........................................2-222
2.2.51 Guard resource release after sending PS HO command ........................2-223
2.2.52 Time of waiting an internal HO command ..............................................2-224
2.2.53 Round trip delay ..................................................................................2-225
2.2.54 IP Abis Wait Timer ...............................................................................2-227
2.2.55 synchronization timer that ensures source BSS receives both PS and
CS responses......................................................................................2-228
2.2.56 synchronization timer that ensures target BSS receives both PS and
CS requests ........................................................................................2-229
2.2.57 T3197.................................................................................................2-230
2.2.58 Paging Interval ....................................................................................2-231
2.2.59 2G Load synchronized to 3G Timer.......................................................2-232
2.2.60 2G Cell Radio Resource Synchronization Timer ....................................2-233
2.2.61 Handover protecting timer to WCDMA/FDD...........................................2-234
2.2.62 SubCell PingPong handover timer ........................................................2-235
2.2.63 Time of Cobcch wait for MR report........................................................2-237
2.2.64 SDCCH Channel release period ...........................................................2-238
2.2.65 SDCCH Channel deactivation delay .....................................................2-239
2.2.66 Mute call detect timer...........................................................................2-239
2.3 BSS Function Handover Control(GBssHandoverControl) ...................................2-240
2.3.1 BSC Handover Control ID ......................................................................2-240
2.3.2 Handover synchronization indication support...........................................2-241
2.3.3 Internal redirection enable......................................................................2-242
2.3.4 Outer redirection enable ........................................................................2-244
2.3.5 BSC intracell handover enable ...............................................................2-245
2.3.6 SDCCH handover enable.......................................................................2-246
2.3.7 Handover request response ...................................................................2-246
2.3.8 Old BSS to new BSS information............................................................2-248
2.3.9 Queuing indicator in handover required message ....................................2-249
2.3.10 A+B solution for TD handover enabled..................................................2-250
2.3.11 Pingpong handover duration.................................................................2-251
2.3.12 Use N/P When Select Neighbour Cell for Pbgt Handover On Sdcch........2-252
2.3.13 Use N/P When Select Neighbour Cell for Pbgt Handover On Tch............2-253
2.3.14 Use N/P When Select Neighbour Cell for Uplink Quality Handover On
Sdcch..................................................................................................2-254
VII
SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential
2.3.15 Use N/P When Select Neighbour Cell for Uplink Quality Handover On
Tch......................................................................................................2-255
2.3.16 Use N/P When Select Neighbour Cell for Downlink Quality Handover
On Sdcch ............................................................................................2-256
2.3.17 Use N/P When Select Neighbour Cell for Downlink Quality Handover
On Tch ................................................................................................2-257
2.3.18 Use N/P When Select Neighbour Cell for Uplink Level Handover On
Sdcch..................................................................................................2-258
2.3.19 Use N/P When Select Neighbour Cell for Uplink Level Handover On
Tch......................................................................................................2-259
2.3.20 Use N/P When Select Neighbour Cell for Downlink Level Handover On
Sdcch..................................................................................................2-260
2.3.21 Use N/P When Select Neighbour Cell for Downlink Level Handover On
Tch......................................................................................................2-261
2.3.22 BSC Internal Handover Parameter of IPA..............................................2-262
2.3.23 Handover between cells of different net support ....................................2-263
2.3.24 the policy of choosing speech version in 3GPP IPA BSC handover .........2-264
2.4 eMLPP Configuration(GBssEmlpp)...................................................................2-265
2.4.1 eMLPP ID.............................................................................................2-265
2.4.2 Queue indicate when assign ..................................................................2-266
2.4.3 Queue allowed when handover ..............................................................2-267
2.4.4 Forced handover indication for assign.....................................................2-268
2.4.5 Forced handover indication for handover ................................................2-269
2.4.6 Forced release indicate when assign ......................................................2-270
2.4.7 Forced release allowed when handover ..................................................2-272
2.4.8 Wait resource timer after forced handover (ForceHoWait, 100ms) ............2-273
2.4.9 Wait resource timer after forced release..................................................2-274
2.4.10 Enough low priority for preemption........................................................2-275
2.4.11 Enough call duration for preemption......................................................2-276
2.4.12 Forced handover target penalty time.....................................................2-277
2.4.13 Priority of emergency service ...............................................................2-278
2.4.14 User priority threshold for EMLPP.........................................................2-279
2.4.15 Reserved channel first .........................................................................2-280
2.4.16 Support EMLPP(SupportEMLPP) .........................................................2-281
2.4.17 EMLPP channel reserved rate..............................................................2-282
2.5 eMLPP User Priority Configuration(GEmlppUserPriority)....................................2-283
2.5.1 eMLPP User Priority Configuration ID .....................................................2-283
2.5.2 User priority ..........................................................................................2-284
2.5.3 Strategy for preemption when assign......................................................2-285
VIII
SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential
2.5.4 Strategy for preemption when handover..................................................2-286
2.5.5 Max forced handover times when assign ................................................2-288
2.5.6 Max forced handover times when handover ............................................2-289
2.5.7 Max forced release times when assign ...................................................2-290
2.5.8 Max forced release times when handover ...............................................2-291
2.5.9 Preemption duration when assign...........................................................2-292
2.5.10 Preemption duration when handover.....................................................2-293
2.5.11 Timer for start forced release when assign ............................................2-294
2.5.12 Timer for start forced release when handover ........................................2-295
2.5.13 Interval for search forced handover target when assign..........................2-296
2.5.14 Interval for search forced handover target when handover .....................2-298
2.5.15 Interval for search forced release target when assign.............................2-299
2.5.16 Interval for search forced release target when handover ........................2-300
2.5.17 Queue timer for assign.........................................................................2-301
2.5.18 Queue timer for handover ....................................................................2-302
2.6 BSS Function PS(GBssFunctionPS).................................................................2-303
2.6.1 BSC PS ID............................................................................................2-303
2.6.2 Bvc flow control period...........................................................................2-304
2.6.3 MS flow control period ...........................................................................2-305
2.6.4 Max times of radio access capabilities update retry .................................2-306
2.6.5 Max times of PFC create retry................................................................2-308
2.6.6 Max times of PFC modify retry ...............................................................2-309
2.6.7 Max times of Bvc block retry ..................................................................2-310
2.6.8 Max times of Bvc unblock retry...............................................................2-311
2.6.9 MAX times of Bvc reset retry ..................................................................2-312
2.6.10 Max times of suspend retry ..................................................................2-314
2.6.11 Max times of resume retry ....................................................................2-315
2.6.12 Max allowed number of continous losses of uplink data
blocks(N3101) .....................................................................................2-316
2.6.13 Times of packet uplink ACK/NACK retries(N3103) .................................2-317
2.6.14 Max allowed number of continuous losses of uplink RLC/MAC control
message(N3105) .................................................................................2-319
2.6.15 Bvc flow control support .......................................................................2-320
2.6.16 MS flow control support .......................................................................2-321
2.6.17 Bvc flow control R MIN value................................................................2-322
2.6.18 MS flow control R MIN value ................................................................2-324
2.6.19 Flow control mode ...............................................................................2-325
2.6.20 PFC support........................................................................................2-326
IX
SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential
2.6.21 Net operation mode .............................................................................2-327
2.6.22 Page coordination support ...................................................................2-328
2.6.23 NACC support.....................................................................................2-330
2.6.24 LLC Transfer for SAPI0(Reserved) .......................................................2-331
2.6.25 LLC Transfer for SAPI1(LLGMM)..........................................................2-332
2.6.26 LLC Transfer for SAPI2(TOM2) ............................................................2-333
2.6.27 LLC Transfer for SAPI3(User-Data) ......................................................2-334
2.6.28 LLC Transfer for SAPI4(Reserved) .......................................................2-336
2.6.29 LLC Transfer for SAPI5(User-Data) ......................................................2-337
2.6.30 LLC Transfer for SAPI6(Reserved) .......................................................2-338
2.6.31 LLC Transfer for SAPI7(LLSMS)...........................................................2-339
2.6.32 LLC Transfer for SAPI8(TOM8) ............................................................2-340
2.6.33 LLC Transfer for SAPI9(User-Data) ......................................................2-341
2.6.34 LLC Transfer for SAPI10(Reserved) .....................................................2-343
2.6.35 LLC Transfer for SAPI11(User-Data).....................................................2-344
2.6.36 LLC Transfer for SAPI12(Reserved) .....................................................2-345
2.6.37 LLC Transfer for SAPI13(Reserved) .....................................................2-346
2.6.38 LLC Transfer for SAPI14(Reserved) .....................................................2-347
2.6.39 LLC Transfer for SAPI15(Reserved) .....................................................2-348
2.6.40 RIM support ........................................................................................2-350
2.6.41 RIM retry times....................................................................................2-351
2.6.42 TBF establish support ..........................................................................2-352
2.6.43 Signal extended uplink TBF support .....................................................2-353
2.6.44 Highest coding scheme of POC service in GPRS ..................................2-354
2.6.45 Highest coding scheme of POC service in EGPRS ................................2-355
2.6.46 Highest coding scheme of signal TBF ...................................................2-356
2.6.47 Support of enhanced radio status procedures........................................2-358
2.6.48 Support of PFC flow control procedures ................................................2-359
2.6.49 PS handover support ...........................................................................2-360
2.6.50 Max of sending PS handover required ..................................................2-361
2.6.51
Enable PS Handover Indications in Inter-BSS
handover
...........................................................................................................2-362
2.6.52 Request SI/PSI ...................................................................................2-363
2.6.53 Service UTRAN CCO support ..............................................................2-364
2.6.54 FANR in TBF support...........................................................................2-365
X
SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential
2.6.55 DLDC support .....................................................................................2-366
2.6.56 RTTI support .......................................................................................2-367
2.6.57 EGPRS2-A support .............................................................................2-369
2.6.58 EGPRS prior to GPRS Support ............................................................2-370
2.6.59 Allocating weights of EGPRS ...............................................................2-371
2.6.60 Choose PS route by NSVC ..................................................................2-372
2.6.61 Enable PS Uplink Power Control In Establishment Phase ......................2-373
2.6.62 DTM Enhance Capability .....................................................................2-374
2.6.63 Enable PCU resource alarm.................................................................2-375
2.6.64 E-UTRAN CCN support .......................................................................2-376
2.6.65 DTM Handover Support .......................................................................2-377
2.6.66 Continue with CS HO While PS HO is failure in DTM HO .......................2-378
2.6.67 Send suspend message when GPRS suspension .................................2-379
2.6.68 Send by SNDCP indicator ....................................................................2-380
2.6.69 TCP/IP performance enhance ..............................................................2-381
2.6.70 IP Segment Optimization .....................................................................2-382
2.6.71 Support resource optimizing by service.................................................2-383
2.6.72 Identify of special service .....................................................................2-384
2.6.73 Extended uplink dynamic allocation support ..........................................2-385
2.6.74 Resource pool for PS rate ....................................................................2-386
2.6.75 Max users of POC service on shared PS channel uplink ........................2-387
2.6.76 Max users of POC service on shared PS channel downlink ....................2-388
2.6.77 Optimized POC service support............................................................2-389
2.6.78 IP abis pool bandwidth restore support .................................................2-390
2.6.79 Max LLC num that per bssgp may save ................................................2-391
2.6.80 Max LLC num that per bssgp may transfer ............................................2-393
2.6.81 RRM threshold ....................................................................................2-394
2.6.82 Parameter of Flow control mode 1 ........................................................2-395
2.6.83 Parameter of Flow control mode 2 ........................................................2-396
2.6.84 Coefficient of Bvc bucket size...............................................................2-397
2.6.85 Coefficient of MS bucket ......................................................................2-398
2.6.86 Enable implicit reject with paging ..........................................................2-399
2.6.87 Implicit reject CS and PS with paging....................................................2-400
2.6.88 PS service Bar when Gb break.............................................................2-401
2.7 Common Measure and Information Exchange(GCommMeas) ............................2-402
2.7.1 Common Measure and Information Exchange ID.....................................2-402
2.7.2 Report characteristics ............................................................................2-403
XI
SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential
2.7.3 Measurement Load Threshold 1.............................................................2-404
2.7.4 Measurement RT Load Threshold 1........................................................2-405
2.7.5 Measurement NRT Load Threshold 1 .....................................................2-406
2.7.6 Measurement Load Threshold 2.............................................................2-407
2.7.7 Measurement RT Load Threshold 2........................................................2-408
2.7.8 Measurement NRT Load Threshold 2 .....................................................2-409
2.7.9 Report periodicity unit ............................................................................2-410
2.7.10 Report Periodicity Value.......................................................................2-411
2.7.11 Measurement Hysteresis Time .............................................................2-412
2.7.12 Event Report Periodicity.......................................................................2-413
2.7.13 Information Report Type.......................................................................2-414
2.7.14 Measurement type...............................................................................2-415
2.7.15 Support of 2g request Iur-g ..................................................................2-416
2.7.16 Not Real Time Load Overflow Threshold ...............................................2-417
2.7.17 Not Real Time Load High Threshold .....................................................2-418
2.7.18 Not Real Time Load Low Threshold ......................................................2-419
2.8 BSC Precise Paging Configuration(GBssPrecisePaging) ...................................2-421
2.8.1 BSC Precise Paging Configuration ID.....................................................2-421
2.8.2 Support Precise Paging .........................................................................2-422
2.8.3 Use HPC for Precise Paging ..................................................................2-423
2.8.4 Adopt Precise Paging for repaging of Circuit Switched Service ................2-424
2.8.5 Adopt Precise Paging for repaging of Packet Switched Service ................2-425
2.8.6 Allow Exceed area Precise Paging for Circuit Switched Service ...............2-426
2.8.7 Allow Exceed area Precise Paging for Packet Switched Service...............2-427
2.8.8 Paging Repeat Time for Circuit Switched Service ....................................2-428
2.8.9 Paging Repeat Time for Packet Switched Service ...................................2-429
2.9 BSC Reserved Configuration(GBssFunctionRsv) ..............................................2-430
2.9.1 BSC Reserved Configuration ID .............................................................2-430
2.9.2 Global Reserved Parameter 1 ................................................................2-431
2.9.3 Global Reserved Parameter 2 ................................................................2-432
2.9.4 Global Reserved Parameter 3 ................................................................2-432
2.9.5 Global Reserved Parameter 4 ................................................................2-433
2.9.6 Global Reserved Parameter 5 ................................................................2-434
2.9.7 Global Reserved Parameter 6 ................................................................2-435
2.9.8 Global Reserved Parameter 7 ................................................................2-436
2.9.9 Global Reserved Parameter 8 ................................................................2-437
2.9.10 Global Reserved Parameter 9 ..............................................................2-438
XII
SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential
2.9.11 Global Reserved Parameter 10.............................................................2-439
2.9.12 Global Reserved Parameter 11.............................................................2-440
2.9.13 Global Reserved Parameter 12 ............................................................2-440
2.9.14 Global Reserved Parameter 13 ............................................................2-441
2.9.15 Global Reserved Parameter 14 ............................................................2-442
2.9.16 Global Reserved Parameter 15 ............................................................2-443
2.9.17 Global Reserved Parameter 16 ............................................................2-444
2.9.18 Global Reserved Parameter 17 ............................................................2-445
2.9.19 Global Reserved Parameter 18 ............................................................2-446
2.9.20 Global Reserved Parameter 19 ............................................................2-447
2.9.21 Global Reserved Parameter 20 ............................................................2-448
2.10 External GSM Cell Configuration(GExternalGsmCell) ......................................2-449
2.10.1 External GSM Cell ID...........................................................................2-449
2.10.2 Cell Identity .........................................................................................2-450
2.10.3 BCCH arfcn ........................................................................................2-450
2.10.4 NCC ...................................................................................................2-451
2.10.5 BCC ...................................................................................................2-452
2.10.6 LAC (LAC) ..........................................................................................2-453
2.10.7 MCC...................................................................................................2-454
2.10.8 MNC...................................................................................................2-455
2.10.9 FreqBand............................................................................................2-456
2.10.10 Cell type ...........................................................................................2-457
2.10.11 GPRS service support........................................................................2-458
2.10.12 Allow SOLSA MS to access ...............................................................2-459
2.10.13 LSA ID..............................................................................................2-460
2.10.14 RAC (RAC) .......................................................................................2-461
2.10.15 Cell bar access 2...............................................................................2-463
2.10.16 GPRS access minimal signal level in idle ............................................2-465
2.10.17 GPRS MAX initial access signal level in idle ........................................2-466
2.10.18 Cell reselection offset in idle ...............................................................2-467
2.10.19 Cell reselection temporary offset in idle ...............................................2-469
2.10.20 Penalty time of cell reselection in idle..................................................2-470
2.10.21 HSC exist in idle ................................................................................2-471
2.10.22 Threshold of HSC signal level in idle ...................................................2-472
2.10.23 HCS priority in idle.............................................................................2-473
2.10.24 GPRS access minimal signal level in transfer ......................................2-474
2.10.25 GPRS MAX initial access signal level in transfer..................................2-476
XIII
SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential
2.10.26 Cell reselection offset in transfer .........................................................2-477
2.10.27 Cell reselection temporary offset in transfer .........................................2-478
2.10.28 Penalty time of cell reselection in transfer............................................2-480
2.10.29 HSC exist in transfer ..........................................................................2-481
2.10.30 Threshold of HSC signal level in transfer.............................................2-482
2.10.31 HCS priority in transfer.......................................................................2-483
2.10.32 MAX power level of MS......................................................................2-484
2.10.33 RemoteSp DN...................................................................................2-486
2.10.34 Um soft Synchronous Support ............................................................2-486
2.11 External UTRAN FDD Cell Configuration(GExternalUtranCellFDD) ...................2-487
2.11.1 External UTRAN FDD Cell ID ...............................................................2-487
2.11.2 CI .......................................................................................................2-488
2.11.3 MCC...................................................................................................2-489
2.11.4 MNC...................................................................................................2-490
2.11.5 RNC ID ...............................................................................................2-491
2.11.6 LAC (LAC) ..........................................................................................2-492
2.11.7 UTRAN cell frequency..........................................................................2-493
2.11.8 Scrambling code..................................................................................2-494
2.11.9 TX diversity indication ..........................................................................2-495
2.11.10 RAC (RAC) .......................................................................................2-496
2.11.11 Whether an external 3G cell is included in GSM system. ......................2-497
2.12 External UTRAN TDD Cell Configuration(GExternalUtranCellTDDLcr) ..............2-498
2.12.1 External UTRAN TDD Cell ID ...............................................................2-498
2.12.2 CI .......................................................................................................2-499
2.12.3 MCC...................................................................................................2-500
2.12.4 MNC...................................................................................................2-501
2.12.5 RNC ID...............................................................................................2-502
2.12.6 LAC (LAC) ..........................................................................................2-503
2.12.7 UTRAN cell frequency .........................................................................2-504
2.12.8 UTRAN TDD cell parameter .................................................................2-505
2.12.9 TX diversity indication..........................................................................2-506
2.12.10 RAC (RAC) .......................................................................................2-506
2.12.11 UTRAN adjacent cell bandwidth..........................................................2-508
2.12.12 Apply Sync Case / Apply TSTD ..........................................................2-509
2.12.13
Whether an external 3G cell is included in
GSM system.
XIV
SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential
...........................................................................................................2-510
2.13 External E-UTRAN FDD Cell Configuration(GExternalEutranCellFDD)..............2-511
2.13.1 External E-UTRAN FDD Cell Configuration ID.......................................2-511
2.13.2 MCC...................................................................................................2-512
2.13.3 MNC...................................................................................................2-512
2.13.4 EUTRAN NODEB Identification ............................................................2-513
2.13.5 Physical layer cell identity of LTE CELL.................................................2-514
2.13.6 specified EARFCN of E-UTRAN cells ...................................................2-515
2.13.7 Tracking area code..............................................................................2-516
2.13.8 The attribute of LTE NodeB..................................................................2-517
2.13.9 the minimum value of the channel bandwidth ........................................2-518
2.13.10 EUTRAN CELL Identification..............................................................2-519
2.14 External UTRAN FDD Cell CRRM Configuration(GCrrmNCellLdFDD)...............2-520
2.14.1 External UTRAN FDD Cell CRRM ID ....................................................2-520
2.14.2 Cs Remained User Num Low Threshold ...............................................2-521
2.14.3 Ps Remained User Num Low Threshold................................................2-522
2.14.4 Cs Remained User Num Medium Threshold..........................................2-523
2.14.5 Ps Remained User Num Medium Threshold..........................................2-524
2.14.6 Uplink Load Low Threshold ..................................................................2-525
2.14.7 Uplink Load Medium Threshold ............................................................2-526
2.14.8 Uplink Load High Threshold .................................................................2-527
2.14.9 Downlink Load Low Threshold..............................................................2-528
2.14.10 Downlink Load Medium Threshold ......................................................2-529
2.14.11 Downlink Load High Threshold ...........................................................2-530
2.14.12 Real Time Uplink Load Low Threshold ................................................2-531
2.14.13 Real Time Uplink Load Medium Threshold ..........................................2-532
2.14.14 Real Time Uplink Load High Threshold ...............................................2-533
2.14.15 Real Time Downlink Load Low Threshold............................................2-534
2.14.16 Real Time Downlink Load Medium Threshold ......................................2-535
2.14.17 Real Time Downlink Load High Threshold ...........................................2-536
2.14.18 Not Real Time Uplink Load Low Threshold ..........................................2-537
2.14.19 Not Real Time Uplink Load Medium Threshold ....................................2-538
2.14.20 Not Real Time Uplink Load High Threshold .........................................2-539
2.14.21 Not Real Time Downlink Load Low Threshold......................................2-540
2.14.22 Not Real Time Downlink Load Medium Threshold ................................2-541
2.14.23 Not Real Time Downlink Load High Threshold .....................................2-542
2.15 External UTRAN TDD Cell CRRM Configuration(GCrrmNCellLdTDDLcr) ..........2-543
XV
SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential
2.15.1 External UTRAN TDD Cell CRRM ID ....................................................2-543
2.15.2 Cs Remained User Num Low Threshold ...............................................2-544
2.15.3 Ps Remained User Num Low Threshold................................................2-545
2.15.4 Cs Remained User Num Medium Threshold..........................................2-546
2.15.5 Ps Remained User Num Medium Threshold..........................................2-547
2.15.6 Uplink Load Low Threshold ..................................................................2-548
2.15.7 Uplink Load Medium Threshold ............................................................2-549
2.15.8 Uplink Load High Threshold .................................................................2-550
2.15.9 Downlink Load Low Threshold..............................................................2-551
2.15.10 Downlink Load Medium Threshold ......................................................2-552
2.15.11 Downlink Load High Threshold ...........................................................2-553
2.15.12 Real Time Uplink Load Low Threshold ................................................2-554
2.15.13 Real Time Uplink Load Medium Threshold ..........................................2-555
2.15.14 Real Time Uplink Load High Threshold ...............................................2-556
2.15.15 Real Time Downlink Load Low Threshold............................................2-557
2.15.16 Real Time Downlink Load Medium Threshold ......................................2-558
2.15.17 Real Time Downlink Load High Threshold ...........................................2-559
2.15.18 Not Real Time Uplink Load Low Threshold ..........................................2-560
2.15.19 Not Real Time Uplink Load Medium Threshold ....................................2-561
2.15.20 Not Real Time Uplink Load High Threshold .........................................2-562
2.15.21 Not Real Time Downlink Load Low Threshold......................................2-563
2.15.22 Not Real Time Downlink Load Medium Threshold ................................2-564
2.15.23 Not Real Time Downlink Load High Threshold .....................................2-565
2.16 External E-UTRAN TDD Cell Configuration(GExternalEutranCellTDD)..............2-566
2.16.1 External E-UTRAN TDD Cell Configuration ID.......................................2-566
2.16.2 MCC...................................................................................................2-567
2.16.3 MNC...................................................................................................2-568
2.16.4 EUTRAN NODEB Identification ............................................................2-569
2.16.5 Physical layer cell identity of LTE CELL.................................................2-570
2.16.6 specified EARFCN of E-UTRAN cells ...................................................2-571
2.16.7 Tracking area code..............................................................................2-572
2.16.8 The attribute of LTE NodeB..................................................................2-573
2.16.9 the minimum value of the channel bandwidth ........................................2-574
2.16.10 EUTRAN CELL Identification..............................................................2-575
2.17 GSM Cell Configuration(GGsmCell)................................................................2-576
2.17.1 GSM Cell Configuration ID ...................................................................2-576
2.17.2 CI .......................................................................................................2-577
XVI
SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential
2.17.3 NCC ...................................................................................................2-577
2.17.4 BCC ...................................................................................................2-578
2.17.5 TSC....................................................................................................2-580
2.17.6 MIN received signal level to access ......................................................2-581
2.17.7 Control channel MAX power level .........................................................2-582
2.17.8 NCC permitted ....................................................................................2-584
2.17.9 GPLMN DN.........................................................................................2-585
2.17.10 LocationArea DN ...............................................................................2-586
2.17.11 Cell Sequence ...................................................................................2-587
2.17.12 BCCH arfcn.......................................................................................2-588
2.17.13 Common control channel configuration ...............................................2-588
2.17.14 PS Support .......................................................................................2-590
2.17.15 GRoutingArea DN..............................................................................2-591
2.17.16 Number of blocks reserved for AGCH .................................................2-592
2.17.17 Number of multi-frames of the PCH ....................................................2-593
2.17.18 Early class-mark sending control ........................................................2-595
2.17.19 CBC support .....................................................................................2-596
2.17.20 FreqBand..........................................................................................2-597
2.17.21 Cell type ...........................................................................................2-598
2.17.22 MAX number of re-transmitting events times .......................................2-599
2.17.23 Number of slots to spread transmission...............................................2-601
2.17.24 Cell bar qualify ..................................................................................2-602
2.17.25 Cell bar access..................................................................................2-604
2.17.26 Call re-establishment allowed.............................................................2-605
2.17.27 Emergency call allowed .....................................................................2-606
2.17.28 Access Control ..................................................................................2-607
2.17.29 Uplink discontinuous transmission ......................................................2-608
2.17.30 Protection period for access attempt ...................................................2-610
2.17.31 Multi-band report indication ................................................................2-611
2.17.32 Redirection enable.............................................................................2-613
2.17.33 Outer redirection enable.....................................................................2-614
2.17.34 Downlink discontinuous transmission allowed......................................2-615
2.17.35 SI13 sending position.........................................................................2-616
2.17.36 Queue allowed when assign...............................................................2-617
2.17.37 Forced release indicate when assign ..................................................2-619
2.17.38 Forced handover indication for assign.................................................2-620
2.17.39 Queue allowed when handover ..........................................................2-621
XVII
SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential
2.17.40 Forced release indicate when handover ..............................................2-622
2.17.41 Forced handover indication for handover.............................................2-623
2.17.42 Cipher mode priority 1........................................................................2-625
2.17.43 Cipher mode priority 2........................................................................2-626
2.17.44 Cipher mode priority 3........................................................................2-627
2.17.45 Cipher mode priority 4........................................................................2-628
2.17.46 Cipher mode priority 5........................................................................2-629
2.17.47 Cipher mode priority 6........................................................................2-631
2.17.48 Cipher mode priority 7........................................................................2-632
2.17.49 Preprocessing indication ....................................................................2-633
2.17.50 Fast average indication ......................................................................2-635
2.17.51 Allowed FACCH call setup after emergency call...................................2-636
2.17.52 Allowed FACCH call setup when page respond ...................................2-637
2.17.53 Allowed call setup on FACCH.............................................................2-638
2.17.54 Allowed call reestablished on FACCH .................................................2-639
2.17.55 Minimal resource threshold ................................................................2-640
2.17.56 PCH load indication period .................................................................2-641
2.17.57 CCCH load indication (RACH) ............................................................2-642
2.17.58 CCCH load indication (PCH) ..............................................................2-643
2.17.59 Interference average period ...............................................................2-644
2.17.60 Interference Band Boundary...............................................................2-645
2.17.61 MAX resending times for physical information......................................2-646
2.17.62 RACH load indication period...............................................................2-647
2.17.63 Average bursts count surveyed by RACH............................................2-648
2.17.64 RACH receiving signal level threshold for busy burst............................2-649
2.17.65 Times of N200 for SDCCH .................................................................2-650
2.17.66 Times of N200 for FACCH_F..............................................................2-651
2.17.67 Times of N200 for FACCH_H..............................................................2-652
2.17.68 Times of N200 for SACCH .................................................................2-653
2.17.69 Times of N200 for establish ................................................................2-654
2.17.70 Times of N200 for Release.................................................................2-655
2.17.71 Interval of SDCCH re-sending PHY info message................................2-656
2.17.72 Interval of TCH re-sending PHY info message.....................................2-657
2.17.73 TA Max .............................................................................................2-659
2.17.74 TA allowed ........................................................................................2-660
2.17.75 Allow SOLSA MS to access ...............................................................2-661
2.17.76 Repeated ACCH support....................................................................2-662
XVIII
SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential
2.17.77 Frequency offset correct support ........................................................2-663
2.17.78 Maximum power on handover command support .................................2-664
2.17.79 Coefficient of Bvc bucket size .............................................................2-665
2.17.80 TA MIN .............................................................................................2-666
2.17.81 8PSK modulating power attenuation level ...........................................2-667
2.17.82 Access class parameter config select..................................................2-668
2.17.83 Cell access control support ................................................................2-669
2.17.84 Support NCell of Channel Release .....................................................2-670
2.17.85 Strategy for E-Utran Neighbour Select When Release .........................2-671
2.17.86 E-Utran FDD and TDD Prio When Release .........................................2-672
2.17.87 Support Emergency call preemption ...................................................2-673
2.17.88 BA show ...........................................................................................2-675
2.17.89 Support CS paging prefer PS Assignment ...........................................2-676
2.17.90 Channel Select Strategy ....................................................................2-677
2.17.91 EMLPP channel reserved rate ............................................................2-678
2.17.92 Use cell EMLPP Threshold.................................................................2-679
2.17.93 Dynamic HR support indication...........................................................2-680
2.17.94 Threshold of AMR HR........................................................................2-681
2.17.95 Threshold for FR to HR......................................................................2-682
2.17.96 Dynamic HR channel allocation algorithm ...........................................2-683
2.17.97 HR channel fragment finishing support................................................2-685
2.17.98 Busy threshold for HR defrag .............................................................2-686
2.17.99 Idle FR threshold For HR defrag .........................................................2-687
2.17.100 HR channel percentage threshold .....................................................2-688
2.17.101 If support allocating channel by TA....................................................2-689
2.17.102 The TA threshold of allocating channel in BCCH ................................2-690
2.17.103 Support dynamic channel move........................................................2-691
2.17.104 Idle static TCH threshold for dynamic channel move ..........................2-692
2.17.105 UpLink Optimize Method for Assignment or Intracell Handover ...........2-693
2.17.106 DownLink Optimize Method for Assignment or Intracell Handover.......2-694
2.17.107 UpLink Optimize Method for Intercell Handover .................................2-695
2.17.108 DownLink Optimize Method for Intercell Handover .............................2-696
2.17.109 UpLink Optimize Method for Immediate Assignment ..........................2-697
2.17.110 DownLink Optimize Method for Immediate Assignment ......................2-698
2.17.111 Uplink target level.............................................................................2-699
2.17.112 Downlink target level ........................................................................2-700
2.17.113 Low RSSI threshold .........................................................................2-701
XIX
SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential
2.17.114 High RSSI Threshold .......................................................................2-703
2.17.115 Ms power inherit threshold................................................................2-704
2.17.116 Additional reselection parameter indication(SI4).................................2-705
2.17.117 Cell reselection parameter indication .................................................2-706
2.17.118 Cell reselection offset .......................................................................2-708
2.17.119 Temporary offset ..............................................................................2-709
2.17.120 Penalty time ....................................................................................2-711
2.17.121 Cell reselecting hysteresis level ........................................................2-712
2.17.122 New setup cause indication ..............................................................2-713
2.17.123 Power offset indication .....................................................................2-714
2.17.124 Power offset ....................................................................................2-716
2.17.125 Priority threshold..............................................................................2-717
2.17.126 LSA Offset ......................................................................................2-718
2.17.127 Additional reselection parameter indicator(SI3) ..................................2-718
2.17.128 MAX value of MS Radio link timeout .................................................2-720
2.17.129 Radio link failure criterion .................................................................2-721
2.17.130 MAX value of BSS Radio link timeout................................................2-722
2.17.131 Receiving level threshold..................................................................2-724
2.17.132 Receiving quality threshold...............................................................2-725
2.17.133 Radio link failure checking period......................................................2-726
2.17.134 BCCH switch allowed.......................................................................2-727
2.17.135 Dynamic configuration SDCCH.........................................................2-728
2.17.136 Baseband frequency hopping TRX exchange support ........................2-729
2.17.137 Start PA power off............................................................................2-730
2.17.138 Switch flag of cell TRX power off.......................................................2-731
2.17.139 Start PA output voltage tuning...........................................................2-732
2.17.140 Enable RRU of cell power off ............................................................2-733
2.17.141 The switch of CIR report...................................................................2-734
2.17.142 The L2 frame of Lapdm fill random value...........................................2-735
2.17.143 MR Report Time Bmp ......................................................................2-736
2.17.144 Support intelligent cell shutting down ................................................2-737
2.17.145 Upper GGsmCell DN .......................................................................2-738
2.17.146 Mobile Originated Short Message Intercept .......................................2-739
2.17.147 Mobile Terminated Short Message Intercept ......................................2-740
2.17.148 Diversity Combine Mode ..................................................................2-741
2.17.149 Joint Source-Controlled Channel Decoding Switch.............................2-742
2.17.150 Joint Source-Controlled Channel Decoding .......................................2-743
XX
SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential
2.17.151 IBS time bitmap ...............................................................................2-744
2.17.152 Cell shuttingdown based on traffic load .............................................2-745
2.17.153 Support implicit reject in assignment .................................................2-746
2.17.154 Implicit reject CS and PS..................................................................2-747
2.17.155 Support broadcasting EAB ...............................................................2-748
2.17.156 EAB Subcategory ............................................................................2-749
2.17.157 EAB Authorization Mask...................................................................2-750
2.17.158 EAB Position ...................................................................................2-751
2.17.159 NCC Config Parameter ....................................................................2-752
2.17.160 RxQual Threshlod............................................................................2-753
2.17.161 TCH Allocation Threshold For Dual-Frequency Network.....................2-754
2.17.162 Um soft Synchronous Support ..........................................................2-755
2.17.163 Is Enhanced Dual-Frequency Network Support..................................2-756
2.17.164 SubCell Channel Allocation Control...................................................2-757
2.17.165 Use Uniform Power Control .............................................................2-758
2.17.166 Longitude ........................................................................................2-759
2.17.167 Latitude...........................................................................................2-760
2.17.168 Altitude ...........................................................................................2-761
2.17.169 Offset Angle ....................................................................................2-762
2.17.170 Site location ....................................................................................2-763
2.17.171 Immediate assignment maximum delay times ...................................2-764
2.17.172 Filter Exceed Traffic threshold NCell .................................................2-765
2.17.173 Emergency Handover use Dynamic Priority.......................................2-765
2.17.174 Assign strategy for Cobcch...............................................................2-766
2.17.175 Arf power reduce function switch ......................................................2-768
2.17.176 SupportBtsBcchExchg .....................................................................2-769
2.17.177 Stop power Reduce Level Threshold.................................................2-770
2.17.178 Reduce Power Step .........................................................................2-771
2.17.179 Reduce Power Arfcn ........................................................................2-771
2.17.180 Prom power step .............................................................................2-772
2.17.181 Non Emergency Handover use Dynamic Priority................................2-773
2.17.182 Immediate assignment occupy PCH option........................................2-774
2.18 Cell Precise Paging Configuration(GCellPrecisePaging) ..................................2-775
2.18.1 Cell Precise Paging Configuration ID ....................................................2-775
2.18.2 Adopt Precise Paging for Circuit Switched Service.................................2-776
2.18.3 Adopt Precise Paging for Packet Switched Service................................2-777
2.18.4 VPC Age Time ....................................................................................2-778
XXI
SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and Confidential
2.18.5 Paging Hole Timer...............................................................................2-779
2.19 Location Area(GLocationArea) .......................................................................2-780
2.19.1 Location Area ID .................................................................................2-780
2.19.2 LAC....................................................................................................2-781
2.19.3 IMSI attach/detach allowed ..................................................................2-782
2.19.4 Periodical location updating timer .........................................................2-783
2.20 Routing Area(GRoutingArea) .........................................................................2-785
2.20.1 Routing Area ID...................................................................................2-785
2.20.2 RAC ...................................................................................................2-785
2.21 AMR Configuration(GCellAmr) .......................................................................2-787
2.21.1 AMR Configuration ID..........................................................................2-787
2.21.2 Support AMR Codec............................................................................2-788
2.21.3 Use cell AMR parameter ......................................................................2-788
2.21.4 AMR full Active Codec Set(4.75kbps) ...................................................2-789
2.21.5 AMR full Active Codec Set(5.15kbps) ...................................................2-790
2.21.6 AMR full Active Codec Set(5.9kbps) .....................................................2-791
2.21.7 AMR full Active Codec Set(6.7kbps) .....................................................2-792
2.21.8 AMR full Active Codec Set(7.4kbps) .....................................................2-793
2.21.9 AMR full Active Codec Set(7.95kbps) ...................................................2-794
2.21.10 AMR full Active Codec Set(10.2kbps).........
