IEC 61215 / IEC 61730ISO 9001: 2015Quality Management System
ISO 14001: 2015Environmental Management System
OHSAS 18001: 2016 Occupational Health & Safety Managemnet System
Akcome Optronics is a leading manufacturer and service provider of professional photovoltaic cells and
modules that can be widely utilized in residence, commerce and ground photovoltaic plant. Founded in
2010, and became wholly-owned subsidiary of Jiangsu Akcome Science & Technology Co., Ltd. (002610).
Akcome Optronics provides PV products with exceptional power output and reliability by integrating
rigorous design, advanced production technology and fully automatic production equipment. Strict quality
control and test standards confirm its pursuit of zero-defect output.
Product warranty on materials and workmanship Linear power output warranty
SK6612MDG
PRODUCT FEATURES
COMPANY PROFILE
LINEAR PERFORMANCE WARRANTY
CERTIFICATES
335/ 340/ 345W
*Certification requirements vary in different markets, please consult with Akcome
Optronics sales team for appropriate certification.
100%97%
90%
80%
Year
2-30 years decay<0.5% annually on average
Po
we
r W
arr
an
ty
10 301
All Rights Reserved @ Akcome Optronics Science & Technology Co., Ltd. , Any changes, Please take the latest version. Ver: 20180201
years
72 CELLS MONO 5BB Double Glass Module
30years
High Conversion Efficiency, Low BOS Cost, SafetyOutput efficiency up to 17.7%, 0~3% positive power tolerance5-busbar has better collected current capabilityMaximum system voltage 1500V, effectively reduce the cost of BOSClass A fire rating
Excellent Low-Irradiance Well generation capacity and temperature stability especially in faint lighting conditions
Anti-PID DesignNo frame attached to earth, effectively avoid PID
Harsh Environment AdaptabilitySalt mist resistanceAmmonia resistanceDust and sand resistance
Robust Mechanical DurabilityStrong mechanical durability of 5400Pa snow load, 2400Pa wind load
PID
Max. Power Output Pmax (W)
Power Tolerance
Max. Power Voltage Vmp (V)
Max. Power Current Imp (A)
Open Circuit Voltage Voc (V)
Short Circuit Current lsc (A)
Module Efficiency (%)
335
0~+3%
37.7
8.89
46.4
9.40
17.1
340
0~+3%
38.0
8.95
46.6
9.49
17.4
ELECTRICAL PARAMETERS @ STC ASSEMBLY DRAWING (Unit:mm)
I-V CURVES / SK6612MDG-345
SK6612MDG
MECHANICAL PARAMETERS
OPERATING CONDITION
PACKAGE INFORMATION
335/ 340/ 345W
All Rights Reserved @ Akcome Optronics Science & Technology Co., Ltd., Any changes, Please take the latest version
*STC (Standard Test Condition): Irradiance 1000W/m2 , Cell Temperature 25OC, Air Mass 1.5
*NOCT(Nominal Operating Cell Temperature): Irradiance 800W/m2 , Ambient Temperature 20OC , Wind Speed 1m/s
All Rights Reserved @ Akcome Optronics Science & Technology Co., Ltd. , Any changes, Please take the latest version. Ver: 20180201
Max. Power Output Pmax (W)
Max. Power Voltage Vmp (V)
Max. Power Current Imp (A)
Open Circuit Voltage Voc (V)
Short Circuit Current lsc (A)
248.0
34.96
7.09
42.96
7.60
251.6
35.12
7.16
43.14
7.67
255.2
35.33
7.22
43.42
7.73
ELECTRICAL PARAMETERS @ NOCT
TEMPERATURE COEFFICIENTSTemperature Coefficients of Pmp
Temperature Coefficients of Voc
Temperature Coefficients of lsc
-0.39%/OC
-0.30%/OC
+0.050%/OC
Cell Type
Number of Cells
Dimensions ( L*W*H )
Weight
Junction Box
Cable, Length
Mono 156.75×156.75mm
72pcs(6x12)
1968x992x25mm
27.5kg
IP67, 3 bypass diodes
4.0mm2 , 225(+)/75(-)mm
Maximum System Voltage(V)
Operating Temperature(℃)
Max. Wind Load / Snow Load(pa)
Max. Over Current(A)
Application Class
Fire Rating
NOCT(OC)
1500(DC)
-40~+85
2400/5400
15
Class A
Class A
45±2
Truck 9.6m / 13m / 17.5m
Container 40'HQ
Quantity / Pallet
540/720/960pcs
660pcs
30pcs
AKCOME OPTRONICS SCIENCE & TECHNOLOGY CO.,LTD.
Add: No. 110 Jintang Road, Zhangjiagang economic and
Technological Development Area, Jiangsu P.R. China
Tel: 400-101-7000
Email: [email protected]
www.akoptronics.com
345
0~+3%
38.2
9.03
46.9
9.57
17.7