Skills and facilities data sheet Panel bonding and edging Grant Westfield Limited Westfield Avenue Edinburgh EH11 2QH t:+44 (0)131 337 6262 f: +44 (0)131 337 2859 e: [email protected]www.grantwestfield.co.uk Grant Westfield have more than 40 years experience in panel bonding. Our knowledge of panel edging in a wide range of material is available to you. These pictures show some of the skills and equipment involved in the production of bonded panels.. Edged panels in production Pressed panels awaiting trim Auto beam saw cutting Panel pressing station Panel edging lines Completed panels awaiting inspection CNC routing and drilling stations
Grant Westfield have more than 40 years experience in panel bonding. Our knowledge of panel edging in a wide range of material is available to you. These pictures show some of the skills and equipment involved in the production of bonded panels..
Edged panels in production
Pressed panels awaiting trim
Auto beam saw cutting
Panel pressing station
Panel edging lines
Completed panels awaiting inspection CNC routing and drilling stations
Grant Westfield have many years experience in forming laminates and manufacturing shaped components from simple rolled edge panels to circular columns
We are extensively equipped to produce architectural postforming linked with CNC machining facilities to offer a complete component service.
These facilities link naturally to our PU cast edging capabilities to offer postformed panels with integral cast end caps typically used for railway rolling stock tables and other high wear applications.
Circular Columns for BAA in laminate and stainless steel
Grant Westfield have complete facilities to manufacture cabinets, counters, and component assemblies from our standard ranges or to your specific requirements.
Products can be manufactured as factory assembled elements or prepared for flat pack transportation for subsequent site assembly.
We have full wood finishing facilities and our own transport for delivery.
Grant Westfield have special skills in the manufacture of components with PU cast edges. These pictures show some of the skills and equipment involved.
