1
Skin and Bone Skin and bone assignment is a study in a specific structual type and surface construction. Also know as the diaphram, shin structure, or the semi-monocoque structure; Frequently used in airplane construction. The Skin and bone structure achieves the maximum surface mass and minimum weight simultaneously. Procedure 1. Use the Villa NM as a starting point to extrct the rails/ ribs for making the structual frame of the skin and bone project. 2. Create a cut sheet from the ribs and stringers and create a physical model. 3. After you achieve the initial digital structure model, start developing the skin of the project. 4. Create an entrance using all the techniques you have learned. Objective Explore the connection between the digital medeling tool and the semi-monocoque construction type. A series of extractions, transformations, and mutations, as design processes will be deployed for the making of this project.
