www.spandexsignsystems.co.uk 01592 631377
Slatz Components Guide: : :
1
MINI SLATZCovers one Slatz Clip,20.5mm overall, 38.8mm face.
MINI END CAP
MIDI SLATZShown with Midi End Cap,30.2mm overall, 26.75mm face.
LITTLE SLATZCovers two Slatz Clips,41mm overall, 37.5mm face.
LITTLE END CAP
HALF ROUND LITTLE END CAP
MIDDLE SLATZCovers three Slatz Clips, 61.5mmoverall, 58mm face.
MillSilver AnodisedBlack AnodisedBronze AnodisedStove Enamel
MillSilver AnodisedBlack AnodisedStove Enamel
Black Plastic
MIDI END CAP
Black Plastic
MillSilver AnodisedBlack AnodisedStove Enamel
Black Plastic
Black Plastic
MIDDLE END CAP
HALF ROUND MIDDLE END CAP
Black Plastic
Black Plastic
MillSilver AnodisedBlack AnodisedStove Enamel
SLATZ FACEPLATES
Slatz Components Guide: : :
2
SLATZ FACEPLATES
BIG END CAP
SUPER END CAP
MillSilver AnodisedBlack AnodisedStove Enamel
MillSilver AnodisedBlack AnodisedStove Enamel
KING END CAP
MillSilver AnodisedBlack AnodisedStove Enamel
BIG SLATZCovers two Slatz Clips,41mm overall, 37.5 face.
KING SLATZCovers six Slatz Clips, 123mm overall,119.5 face.
SUPER SLATZCovers eight Slatz Clips, 164mm over-all, 160.5 face.
Black Plastic
Black Plastic
Black Plastic
www.spandexsignsystems.co.uk 01592 631377
Slatz Components Guide: : :
3
SLATZ FACEPLATES
MillSilver Anodised
MillSilver AnodisedBlack AnodisedStone Anodised
MillSilver AnodisedBlack AnodisedStone Anodised
MillSilver AnodisedBlack AnodisedStone Anodised
MINI EDGEUsed to fabricate panels of any depth.Accepts 18 swg aluminium.
SQUARE MINI EDGEUsed to fabricate panels of any depth.Accepts 18 swg aluminium.
CURVED LITTLE SLATZCovers two Slatz Clips.60.5mm overall.
CURVED MINI SLATZCovers one Slatz Clip.30mm overall.
www.spandexsignsystems.co.uk 01592 631377
Slatz Components Guide: : :
4
SLATZ FACEPLATES
MillSilver AnodisedBlack AnodisedStove Enamel
MillSilver AnodisedBlack AnodisedStove Enamel
MIDDLE ENGRAVER SLATZAccepts engraving laminates up to 1.5mmthick.
LITTLE ENGRAVER SLATZAccepts engraving laminates up to 1.5mmthick.
Black Plastic
MIDDLE ENGRAVER SLATZ CAP
Black Plastic
LITTLE ENGRAVER SLATZ CAP
www.spandexsignsystems.co.uk 01592 631377
Slatz Components Guide: : :
5
SLATZ FACEPLATES
MillSilver AnodisedBlack AnodisedStove Enamel
BIG ENGRAVER SLATZAccepts engraving laminates up to 1.5mmthick.
MillSilver AnodisedBlack AnodisedStove Enamel
KING ENGRAVER SLATZAccepts engraving laminates up to 1.5mmthick.
MillSilver AnodisedBlack AnodisedStove Enamel
SUPER ENGRAVER SLATZAccepts engraving laminates up to 1.5mmthick.
Silver Anodised
*BIG SLATZ SLIDERAccepts one Slatz Sliding Insert
Black Plastic
BIG END CAP
Silver Anodised
Silver Anodised SV118
*BIG SLATZ TWIN SLIDERAccepts two Slatz Sliding Inserts
**LITTLE SLATZ SLIDERAccepts one Slatz Sliding Insert
* Can only be used on directories by removing exess Slatz Clips. ** Can not be used on Slatz directories.
Black Plastic
BIG ENGRAVER SLATZ CAP
www.spandexsignsystems.co.uk 01592 631377
Slatz Components Guide: : :
6
SLATZ FACEPLATES
MillSilver AnodisedBlack AnodisedBronze AnodisedStove Enamel
MillSilver AnodisedBlack AnodisedStove Enamel
MillSilver AnodisedBlack AnodisedStove Enamel
MillSilver AnodisedBlack AnodisedStove Enamel
SQUARE LITTLE SLATZCovers two Slatz Clips.41mm overall, 38.8mm face.
SQUARE MINI SLATZCovers two Slatz Clips.20.5mm overall, 18.3mm face.
SQUARE BIG SLATZCovers four Slatz Clips.82mm overall, 79.8mm face.
MillSilver AnodisedBlack AnodisedStove Enamel
SQUARE KING SLATZCovers four Slatz Clips.123mm overall, 119mm face.
SQUARE SUPER SLATZCovers eight Slatz Clips.164mm overall, 161.3mm face.
www.spandexsignsystems.co.uk 01592 631377
Slatz Components Guide: : :
7
SLATZ FACEPLATES
Black PlasticSLATZ STAND
Black PlasticSLATZ KEY
www.spandexsignsystems.co.uk 01592 631377
Slatz Components Guide: : :
8
SLATZ SIDETRACKS & CAPS
MillBlack AnodisedStove EnamelSilver
MillBlack AnodisedStove EnamelSilver
MillBlack AnodisedStove EnamelSilver
QUADRANT SIDETRACKAdds 40mm to width of directory(2 x 20mm).
ANGLED SIDETRACKAdds 40mm to width of directory(2 x 20mm).
SQUARE SIDETRACKAdds 16mm to width of directory (2 x 8mm).
www.spandexsignsystems.co.uk 01592 631377
Slatz Components Guide: : :
9
SLATZ SIDETRACKS & CAPS
MillBlack AnodisedStove Enamel
MillBlack AnodisedStove EnamelSilver
MillBlack Anodised
MillBlack AnodisedStove EnamelSilver
DOUBLE SIDED SQUARESIDETRACKAdds 16mm to width of directory (2 x 8mm).For projected or suspended applications.
DOUBLE SIDED QUADRANTSIDETRACKAdds 40mm to width of directory (2 x20mm). For projecting or suspended applica-tions.
DOUBLE SIDEDSTANDARD TRACKUsed for intermediate support of doublesided directories (projecting or suspended)over 500mm wide.
SQUARE DIVIDER TRACKFor use with Square Sidetrack andSquare Dividertrack incorporatingSquare Slatz.
www.spandexsignsystems.co.uk 01592 631377
Slatz Components Guide: : :
10
SLATZ SIDETRACKS & CAPS
Black Plastic
Black Plastic
Black Plastic
QUADRANT CAPFor use with Quadrant Sidetrackincorporating Square Slatz.
ANGLE CAPFor use with Angle Sidetrackincorporating Square Slatz.
CURVED CAPFor use with Square Sidetrack andDividerTrack incorporating CurvedSlatz.
www.spandexsignsystems.co.uk 01592 631377
Slatz Components Guide: : :
11
SLATZ SIDETRACKS & CAPS
Black Plastic
Black Plastic
Black Plastic
CURVED DOUBLESIDED CAPFor use with Square Sidetrack andSquare Dividertrack incorporatingSquare Slatz.
DOMED CAPFor use with Quadrant Sidetrackincorporating Curved Slatz
SQUARE CAPFor use with Square Sidetrack andSquare Dividertrack incorporatingSquare Slatz.
www.spandexsignsystems.co.uk 01592 631377
Slatz Components Guide: : :
12
SLATZ SIDETRACKS & CAPS
MillBlack Anodised
Black Plastic
MillSilver AnodisedBlack AnodisedStove Enamel
Black Plastic
STANDARD TRACKUsed for intermediate support ofdirectories wider than 500mm.
SLATZ CLIPSFit all Sidetracks. Available inmodular units of eight. Blackmoulded plastic.
TRIANGULAR DESK SIGNTwo 30mm faces, one insert face.take one 25mm Slatz insert. Shownwith End Cap.
TRIANGULAR DESK SIGN CAPFor use with Trianglular desk Sign.
www.spandexsignsystems.co.uk 01592 631377