8
Sliding Door System Terra Akzent ST.1064.TA Premium Edition
Sliding Door System Terra AkzentST.1064.TA
Premium Edition
Premium Edition
SLIDING DOOR SYSTEM TERRA AKZENT
Sliding Door System TERRA AKZENT ST.1064.TA2 3
PREMIUM SYSTEMS
4 5
The latest hardware to join the Terra series is Terra Akzent. Apart from its sleek contemporary look, the system also has some technical surprises in store: for example, the height of the sliding door can be adjusted even after installation! To do so, the roller can be moved a few millimeters up or down inside its housing. And all without any effect on the door’s aesthetics, because the technical components are hidden behind a magnetic cover.The Terra Akzent system comes in two versions. The floor overlaying rail can be screwed or glued to the floor. Additionally to that MWE has engineered a floor recessed rail and Terra Akzent wheels with convex rollers to meet customers‘ request for barrier-free beams.
Door weight max. 80 kg
Sliding Door System
TERRA AKZENT ST.1064.TA
Standard finish is decorative satin stainless steel. Partly polished, completely polished or PVD coatedfinishing (copper, gold or black) is available on request.Feel free to contact us, if you want to learn more about the Terra Akzent system.
PREMIUM SYSTEMS SLIDING DOOR SYSTEM TERRA AKZENT
For Terra systems with the rails flush-mounted to the floor, the floor rollers are supplied suitably tailored!
Terra Akzent glass groove: Optional: recessed floor railFloor rail measurements:
at least 100 mm
Premium Edition
Premium Edition
SLIDING DOOR SYSTEM TERRA AKZENT
Sliding Door System TERRA AKZENT ST.1064.TA6 7
PREMIUM SYSTEMS
Premium Edition
SLIDING DOOR SYSTEM TERRA AKZENT
Sliding Door System TERRA AKZENT ST.1064.TA8 9
PREMIUM SYSTEMS
MWE has engineered a floor recessed rail and Terra Akzent wheels with convex rollers to meet customers‘ request for barrier-free beams.
Overlaying rail to be screwedorglued - concave wheels
Floor recessed rail -convex wheels
ONE-PART GUIDE PROFILE INSTALLATION OPTIONSGUIDE PROFILE FOR TERRA SYSTEMS, ONE-PART
10 11
21
62
R8
23 - 30
4030
MWE guide profiles are always made of stainless steel!
– The profiles can be adjusted to glass thicknesses on an individual basis– Profile ends can be closed with a welded lid of stainless steel, thus providing a clean end– The surface finish is provided to a quality of grain 600 (jewellery quality)
(mirror finish possible)
If installation is onto a wall or glass, the holes on the guide profile are covered with clip lids.
Wall / ceiling guide profile, one-part
The guide profile is divided from a length of 3 metres!
Standard ceiling fastener
ST.2100.TE wall fastener ST.2176.TE.S glass fastener
Standard wall fastenerVariant 1:
Variant 3: Variant 4:
Variant 2:
ST.2100.TE wall fastener with spacer sleeves
Different wall spacer sleeves to compensate for e.g. skirting boards or frames in 5 mm steps available.Give base measurement / wall distance when ordering!
Stopper for one-part guide profile
Wall angle for one-part guide profile
Price: 45 % surcharge per component / system
Lid for one-part guide profile Mirror-finished surfaces
Wall fastener for one-part guide profile
Delivery includes clip lid
Glass fastener for one-part guide profile
Incl. distance spacer sleeve, wall distance in accordance with customer information
For a closed front side (welded)Mirror finished as part of manufacture
One-part guide profile
One-part guide profile One-part guide profile
One-part guide profile
Glass fastening with spacer sleeves
Different glass spacer sleeves to compensate for e.g. skirting boards or frames in 5 mm steps available. Give base measurement / wall distance when ordering!
Fastening with angle(in the scope of supply):no visible screws from the front!
ST.4040.TE
ST.3060.TEST.2100.TE ST.2176.TE.S
ST.2100.TE.W ST.4060.TE
GUIDE PROFILE INSTALLATION OPTIONS, TWO-PARTS WITH MWE SOFT STOP TECHNOLOGYTWO-PARTS GUIDE PROFILE FOR TERRA SYSTEMS WITH MWE SOFT STOP TECHNOLOGY
Standard ceiling fastener
ST.2100.TE.S wall fastener ST.2176.TE.S glass fastener
Standard wall fastenerVariant 1:
Variant 3: Variant 4:
Variant 2:
ST.2100.TE.S wall fastener with spacer sleeves
Different wall spacer sleeves to compensate for e.g. skirting boards or frames in 5 mm steps available.Give base measurement / wall distance when ordering!
Price: 45 % surcharge per component / system
Mirror-finished surfacesGlass fastener for two-parts guide profile Wall fastener for two-parts guide profile
Incl. distance spacer sleeve, glass distance in accordance with customer information
Mirror finished as part of manufacture
Two-parts guide profile
Two-parts guide profile Two-parts guide profile
Two-parts guide profile
Advantage of a two-piece guide profile: no visible screws from the front!
Advantage of a two-piece guide profile: no visible screws from the front!
Wall / ceiling guide profile, two-parts, for MWE soft stop technology
26 - 32
13
47.5
R8
Türblattbreite / 2
23.5
70MWE soft stop technology for Terra systems
Incl. fasteners, dampers, catches and grid plates
Caution: Max. door leaf weight 75 kg
MWE standard:The delivery of the two-part guide profiles takes place with the lids welded for closed front sides.
Caution:Please indicate if closed front sides are not necessary(e.g. niche area)
Glass fastening with spacer sleeves
Different glass spacer sleeves to compensate for e.g. skirting boards or frames in 5 mm steps available. Give base measurement / wall distance when ordering!
If the wall distance cannot be compensated for, it can be installed onto glass without a distance spacer.Advantage: small gap dimensions!
MWE guide profiles are always made of stainless steel!
– The profiles can be adjusted to glass thicknesses on an individual basis– Profile ends are closed with a welded lid as standard, thus providing a clean end– The surface finish is provided to a quality of grain 600 (jewellery quality)
(mirror finish possible)
The guide profile is divided from a length of 3 metres!
Inc. rosette, spacer sleeve, screw and wall plug, wall distance in accordance with customer information
Door leaf width / 2
ST.4053
ST.3660
ST.2176.TE.S ST.2100.TE.S
12 13
M A N U FA C T O RY
Doors Door pullsLadders Showers
MWE stands for high quality and great attention to detail. Our philosophy and mission is to provide products that keep up with the spirit of the time.We keep meeting the highest requirements in terms of design, quality and functionality. Top MWE technology com-bined with excellent customer relationship management results in “Quality built on passion”!
Click here to browse through our catalogues and magazines:
14 15
