Smove - Adapter to be screw fixed to the door
Sliding system for concertina doors
Slid
ing
syst
em f
or
conc
erti
na d
oors
271
The Salice system for concertina doors has been designed to open both doors on one side only, giving good access to the interior of the cabinet. Space taken up by the door in the maximum open position is reduced to a minimum (approximately 80 mm).
A nylon strip is available in order to prevent insertion of objects or fingers between doors. This also makes the system dustproof.
To ensure that the door closes fully and securely, particularly when there is some curvature of the door, a locating device is available.
Sliding system for concertina doors - Technical features
272
F1C169
F1CO69
F1CZ69
F1PVAY
F1PXAY
F1CXE9
F1C0E9
D206BK5
F1SBAY
F1RFAY
Hinge for sliding block
For aluminium-framed doors
Hinge for the Practical system of aluminium-framed doors
Long sliding blockFor aluminium-framed doors
Sliding block
Central hinge
screw-on
knock-in Dowels Ø 8x11.5
Adhesive finger-protection strip
Central hinge for the Practical system of aluminium-framed doors.
Locating device for door
neutro
Elements of the system
273
+2 mm -2 mm
+2.5 mm
Sliding system for concertina doors - Adjustments
Calibrated height adjustment
Height adjustment of hinges assembled with the sliding components is achieved through a cam. Through this alignment a parallel movement of the component in the track is achieved. The result is a smooth movement without any binding.ATTENTION! The sliding block does not have a load-bearing function. Therefore it must slide freely inside the track.
Depth adjustment
Depth adjustment of the hinges mounted on the sliding component is achieved through the fixing screw of the same hinge.Depth adjustment should be made in conjunction with the hinges mounted on the opposite door. This adjustment is useful to keep the “L” value constant all along front of the furniture.
274
F1GIA1…………
F1GIA3…………
F1GIAG…………
F1GIAP…………
F1GFA1…………
F1GFA3…………
F1GFAG…………
F1GFAP…………
barb-fixed screw-on B 3.5 DIN 7982
Standard lengths available: 590 mm, 880 mm, 1180 mm. Non-standard lengths can be supplied subject to a minimum order quantity of 900 pieces. The required length should be expressed in millimetres in the last four digits of the product code occupied by the dashes.
Mount the hinges of the fixed door on to the mounting plates on the cabinet side. We recommend the use of Salice hinge part number C2A6A99 110° with BAR3R mounting plate or similar.
Position the sliding block inside the track by rotating it 90°.
Lock the sliding block into position by turning the marked in orange lever.
Colours
white
black
grey
beige
Assembly
275
Sliding system for concertina doors - Assembly instructions
Application into the top of the cabinet and doorsSolution with plastic track barb-fixed or screw-fixed
Drilling distances without finger-protection stripTo facilitate the assembly of the doors on the cabinet, it is preferable to premount all the hinges.
Central assembly:- narrow part to be mounted on the door which is fixed to the cabinet side;
- wider part to be mounted on the moving door.
Drilling distances with finger-protection stripTo facilitate the assembly of the doors on the cabinet, it is preferable to premount all the hinges.
Central assembly:- narrow part to be mounted on the door which is fixed to the cabinet side;
- wider part to be mounted on the moving door.
276
Application into the top of the cabinet and doors.Solution with plastic track barb-fixed or screw-fixed.
Glass doors with aluminium-frameDrilling distances without finger-protection strip and with long sliding blockTo facilitate the assembly of the doors on the cabinet, it is preferable to premount all the hinges.
Central assembly:- narrow part to be mounted on the door which is fixed to the cabinet side;
- wider part to be mounted on the moving door.
Central assembly:- narrow part to be mounted on the door which is fixed to the cabinet side.
- wider part to be mounted on the moving door.
Glass doors with aluminium frameDrilling distances with finger-protection strip and long sliding blockTo facilitate the assembly of the doors on the cabinet, it is preferable to premount all the hinges.
277
Sliding system for concertina doors - Assembly instructions
Application into the top of the cabinet and doorsSolution with barb-fix and screw-fix plastic track
Glass doors with the Practical system of aluminium-framed doorsDistance to be used when finger-protection strip and four-screw corner joint (D206BS5L) are usedTo facilitate the assembly of the doors on the cabinet, it is preferable to premount all the hinges.
Glass doors with the Practical system of aluminium-framed doorsDistance to be used when finger-protection strip and two-screw (D206BS5) or four-screw (D206BS5L) corner joint are usedTo facilitate the assembly of the doors on the cabinet, it is preferable to premount all the hinges.
Central assembly:- narrow part to be mounted on the door which is fixed to the cabinet side;
- wider part to be mounted on the moving door.
Central assembly:- narrow part to be mounted on the door which is fixed to the cabinet side;
- wider part to be mounted on the moving door.
278
300
300
600
600
300
300
300
300
300
200
75
150
7.200
7.200
14.400
14.400
7.200
7.200
7.200
7.200
7.200
F1C169
F1PXAY
F1CXE9
F1GFA……
.
F1KFX3X880
F1KFX 3 X880X590 = 590 mmX880 = 880 mm1180 = 1180 mm
25
25
75
25
.
F1C169
F1PXAY
F1CXE9
F1COE9
F1RFAY
F1CZ69
F1CA69
F1PVAY
F1C069
Packaging (standard packaging)
pcs.
pcs.
pcs.
pcs.
pcs.
pcs.
pcs.
pcs.
pcs.
metres
pcs.
pcs.
pcs.
pcs.
pcs.
pcs.
pcs.
pcs.
pcs.
pcs.
pcs.
Elements of the system Boxes Pallets
Adhesive finger-protection strip
Tracks 880 mm - 1180 mm
Tracks 590 mm
KIT - Packaging
F1KFX3X880
Track length code number:Part of code number identifying system for concertina doors.
Track colour code number:1 = white3 = blackG = greyP = beige
Available in 3 lengths
and 4 colours
pcs.
pcs.
pcs.
pcs.
Code number composition (example)
Packaging and code number
279
280