SLP RZR Catalog 2012

Dear SLP Customer,

Riding a UTV is as much about the journey as the destination.And making the journey more exciting is what we specialize in.Whether your journey takes you through the deep dark woods, upa twisty mountain trail, onto the scorching sands, into the deep-est mud holes or across the nastiest rocks this earth has to offer,we can help. We have many new and exciting products that addprotection, performance and comfort scattered throughout thepages of this catalog. Please feel free to contact one of our knowl-edgeable representatives with any questions you may have.

Always Ready to Serve,

The Starting Line Products Crew

3

RZR Doors for Polaris 570 RZR, 800 RZR,RZR-S and RZR XP 900SLP’s RZR Doors partially enclose the cab area to

help keep dust, dirt, mud, and water out. Our unique

hinge design allows the door to be easily removed.

These doors use a rear mounted hinge with the latch

in the front for ease of entry and exit. The spring-

loaded interior latch assembly allows quick and easy

access with only a light push or pull required on the

door to latch it closed. Designed to provide the opera-

tor and passenger a more comfortable off-road expe-

rience, these doors utilize a lightweight tube frame

design with plastic hard side. Sold per pair.2011-12

2008-10

Door Graphic

Kits Coming

Soon!

PART # DeSCRiPTion PRiCe/PAiR

67-144 2008-10 RZR and RZR-S 429.00

67-122 2012 570 RZR

2011-12 800 RZR and RZR-S

429.00

67-122 2011-12 RZR XP 900 429.00

Part # 67-144 now utilizes the same popular

interior latch design as part # 67-122.

4

Rocker Armor™ for Polaris RZR SLP’s Rocker Armor™ protects the underside of the Polaris RZR

against rocks and other hard objects without losing valuable

ground clearance. Made

of high-tensile steel for

superior strength. They

slide easily over sharp

rocks and are extremely

resistant to gouging. The

protection area covers

from wheel well to wheel

well and they are powder

coated for maximum durability. In-

cludes mounting hardware and in-

stallation instructions. Sold per pair.

Free Freight*

to Lower

48 States*Free freight is available for ground service only on SLP’s choice of carriers.

Integrated

Fuel Tank

Guard (RZR XP

900 only).

**RZR 900 Rocker Armor has an integrated fuel tank guard.

RZR 900 XP Rocker Armor

RZR/RZR-S Rocker Armor

800 RZR-4 Rocker Armor

PART # DeSCRiPTion CoLoR PRiCe/PAiR

67-100 570/800RZR and RZR-S Silver and Black 255.00

67-103 570/800RZR and RZR-S Black Texture 255.00

67-109 800 RZR-4 Silver and Black 479.00

67-110 800 RZR-4 Black Texture 479.00

67-126 RZR XP 900** Silver and Black 299.00

67-127 RZR XP 900** Black Texture 299.00

67-145 RZR-4 XP 900 Black Texture TBA

5

Performance Slip-on Silencer for Polaris 800 RZR This performance slip-on silencer for the Polaris RZR is designed for maximum

airflow without substantially increasing sound level output. It provides a 79%

increase in airflow over the stock silencer. This results in a substantial

performance improvement, showing better throttle response as well as top-end

horsepower. The sound levels are within 2 decibels of stock (90 dBA on SAE

J1287 test) for a trail friendly performance silencer. It also features a removable

Forest Service approved spark arrestor.

Super Silent Muffler for Polaris 800 RZR, RZR-S and RZR-4 This muffler for the Polaris RZR is an incredible 5 decibels quieter than stockwhile providing a 41% increase in airflow (20 more cfm) for more power. The

subtle sound of this muffler provides a relaxing environment for the rider and

passenger to carry on a conversation easily while under way, not to mention the

benefit to others in the surrounding area. Whether you are using your RZR to get

you in and out of your favorite hunting spots, or just want to have a more enjoy-

able ride with less noise, this muffler is perfect for you.

Features a removable Forest Service approved spark arrestor.note: 2009 standard RZR will require the rear differential stabilizerbracket to be changed to the 2010 rear differential stabilizerbracket (Polaris Part number 3235062).

PART # DeSCRiPTion PRiCe

09-108 2008-12 Polaris 800 RZR, RZR-S and RZR-4 355.95



5 dB quieter on

SAE J1287

stationary

test @ 3300 RPM

6

Performance Slip-on Muffler for Polaris RZR XP

900 and RZR-4 XP 900This new slip-on silencer for the Polaris XP 900 RZR de-

livers well over double the airflow compared to the stock

silencer. This translates into a substantial performance

increase and better throttle response. Its stainless steel

construction provides excellent strength and durability.

The sound level measures 91.5 DB using the SAE J

1287 sound test. It also includes a spark arrestor that

can be added for trail use.


09-109 2011-12 RZR XP 900

and 2012 RZR-4 XP 900

475.00

Have you seen PowerSports Adventures?For the second year in a row we have teamed up with the television

show PowerSports Adventures as their title sponsor. Every episode

combines motorsports action with outdoor recreation while showing

some of the latest products for your RZR in action. If you haven’t taken

the opportuninty to see this show we encourage you to tune in and

watch the next episode. It can be found on the Pursuit Channel (Di-

rectTV channel 608 or DishNetwork channel 240) or on the Altitude

Sports and Adventures Channel (DirectTV channel 681 or DishNetwork

channel 410). If using another TV provider check your local listings. Visit

our website (www.startinglineproducts.com) and click on the

PowerSports Adventures link to learn more or to watch previous episodes.

7

Front Bumper kit for Polaris 570 RZR, 800 RZR, RZR-S,RZR-4, XP 900 RZR & XP 900 RZR-4 Whether bajaing down a nasty trail or creeping across

rocky, rugged terrain, this bumper kit protects well against

the gnarliest conditions. Made of 1 3/8” x .095” wall DOM

for strength then powder coated for a great look and

maximum durability. It also features

two anchor points for D-Rings, as

well as mounting points for Baja

Lights. Kit includes all mounting

hardware and installation instruc-

tions.

note: This kit mounts to factory upper mounting location

on RZR 570/800 models . To increase strength of this

mounting position, use SLP High Strength Upper Mount

Kit (part #67-129) see page 8.

PART # DeSCRiPTion PRiCe/kiT

67-101 2008-10 Silver and Black 400.00

67-104 2008-10 Black Textured 400.00

67-123 2011-12 Silver and Black 350.00

67-125 2011-12 Black Textured 350.00

Free Freight*

to Lower

48 States

2008-10

2011-12

*Free freight is available for ground service only on SLP’s choice of carriers.

8

High Strength Front Bumper Upper Mount kit /Radiator Support for Polaris 570/800 RZR, RZR-S and RZR-4This kit replaces the stock radiator mount bracket that also

acts as an upper mounting point for most bumpers. It is

made of high-strength steel that has been reinforced so that

it can take more impact in the event of a crash without the

bumper folding into and damaging the radiator and other

front-end components. Compatible with most factory and

aftermarket front bumpers.

Front Skid Plate for Polaris 570/800 RZR, RZR-S and RZR-4This skid plate covers the area between the SLP Front Bumper and the

stock center plastic skid plate, which is the section of frame where the a-

arms mount. It is made from high-tensile strength steel to protect against

rocks and other hard objects without losing valuable ground clearance.

This material slides easily over sharp rocks and is extremely resistant to

gouging.

PART # PRiCe/kiT

67-130 35.00

PART # PRiCe/kiT

67-129 75.00

9

Rear Bumper kit for 2008-12 Polaris800 RZR, RZR-4 and 2011-12 800 RZR-S This rear bumper kit is a must for any RZR owner! In stock form there

is no protection for the rear of the vehicle. This kit protects your invest-

ment, looks great, and opens up additional storage area. It incorpo-

rates a rear tire mount, freeing up trunk space to haul the necessary

gear so you can fully enjoy your outdoor experience. It also features a

flag mount. Made of 1 3/8” x .095” wall DOM for strength then powder

coated for a great look and maximum durability. Kit includes all mount-

ing hardware and installation instructions.

noT for 2009-10 RZR-S.


67-102 Silver and Black 375.00

67-105 Black Textured 375.00

Free Freight*

to Lower

48 States

*Free freight is available for ground service only on SLP’s choice of carriers.

Trailing Arm Guards for Polaris XP 900 RZR/RZR-4 Made out of UHMW plastic for super strength and wear resist-

ance, these trailing arm guards provide great protection in all

conditions, but especially in the rocks where they slide easily

over hard surfaces. They compliment the use of our Rocker

Armor (page 4). PART # PRiCe/PAiR

67-137 250.00

Tire not included.

10

Secure Storage Glove Box for

Polaris RZR all modelsThis attractive aluminum glove box from SLP offers well-needed stor-

age for the Polaris RZR. It is built with a strong aluminum body and

faceplate that utilizes a keyed lock for securing your valuables. The

position that it is located in provides the passenger easy access to

this storage, which is great for cell phones, cameras, small hand-

guns, wallets, vehicle registration, etc. Also, it is weather resistant to

protect your valuables.PART # DeSCRiPTion PRiCe/kiT

67-121 Polished Aluminum 155.00

67-128 Black Texture 155.00

Billet Gas and Brake Pedal Covers for 2009-12 Polaris 570/800 RZR, RZR-S, RZR-4 and

XP 900 RZR and RZR-4These billet pedal covers bolt to the stock steel pedals to give you a trick

billet look as well as increased performance. The stock gas pedal will not

reach full throttle without turning your foot sideways to force the pedal

down to full throttle. The additional height of this billet gas pedal comfort-

ably gives you the extra 7% throttle opening the stock pedal lacks. This

allows you to comfortably achieve full throttle every time you desire it.

The unique pattern on these pedals provides the

proper amount of grip on the bottom of your foot.

Sold per set. Will not fit 2008 models.

Shown with pedal

covers installed on

stock levers. Levers

not included

PART # PRiCe/SeT

67-138 84.95

11

Universal 1/2” D-Ring This Universal D-Ring can be mounted to the SLP front bumper

mounts and gives your RZR a rugged offroad look while adding

easy access to winch or tie down points (fits perfectly on the points

of the SLP Front Bumper). Load rated at

4,000 pounds and galvanized for

strength and durability. Requires a 5/8”

hole for D-Ring pin, the D-Ring loop is

1/2” diameter.

PART # PRiCe/eA.

67-117 10.95

1/2” D-Ring and Stinger Combofor Polaris 570/800 RZR, RZR-S and 800 RZR-4This D-Ring and Stinger Combo gives you a solid towing/pulling point on

your RZR without risking damage to the frame or suspension. The D-Ring

is load rated at 4,000 pounds and galvanized for

strength and durability. The stinger is made from

solid billet 6061 T-6 aluminum for a strong, light-

weight and durable part.

PART # PRiCe/kiT

67-119 34.95

Will fit Class ii (1 1/4” x 1 1/4”) receivers.

12

Hood Grill / Radiator Vent kit for 2008-10 Polaris RZR, RZR-S and RZR-4This radiator vent kit not only provides a trick new look but also delivers an

additional 116% more air intake surface area to the radiator. This allows the

radiator to more efficiently cool the engine while moving. Offered with hon-

eycomb or oval pattern backer.

PART # Description PRiCe/kiT

67-135 Grill kit with honeycomb backer 59.95

67-140 Grill kit with oval backer 59.95

Lower Radiator Vent Grill with Hood Hold Down for 2008-10 Polaris RZR, RZR-S and RZR-4This radiator vent grill with honeycomb pattern gives an awesome look while

providing a positive hold down for the hood.

PART # PRiCe/kiT

67-139 49.00

Oval Honeycomb

13

Wheel Spacer kitsfor Polaris RZR all models

These wheel spacer kits allow you to widen your RZR, RZR-S, RZR-4 or RZR XP

900 for more stability when running high speed tight trails/roads or crawling over the

nastiest rock piles. It does so by giving you an additional 7/8” or 1 3/4” width per

side (1 3/4” or 3 1/2” overall). These wheel spacers utilize a locking ring (also known

as Hub Centric) that fits precisely into the wheel to provide maximum strength, dura-

bility and proper balance. This locking ring locks the wheel to the spacer and by doing so places the major-

ity of the stress on the wheel spacers themselves rather than on the studs alone. Also, by ensuring the

wheel is centered with this Hub Centric ring, proper balance is maintained. They are manufactured from

high quality billet aluminum and are precision CNC machined to ensure perfect fit and proper balance.

These wheel spacers can be used on all RZR models with some limitations based on wheel offset and tire

size, see our recommendations below. Simple bolt on installation with no permanent modifications required.

Sold per pair.

7/8” Wheel Spacers. These wheel spacers can be used on all RZR models, and we find the most popular

applications are RZR-S, RZR-4 and RZR XP 900 models to give them more stability. They also work great

on standard RZR models if using larger than 26” tires or aftermarket wheels with more offset than stock

(this is the maximum width that can be used and still keep the tires from contacting the rear of the front

fender well when turning and going through the bumps). They also allow the use of 12” wide rear tires on

stock wheels without contacting the frame (standard RZR).

1 3/4” Wheel Spacers. These wheel spacers can be used on all RZR models, and we find the most

popular applications are standard RZR models using 26”

tires or smaller and stock offset wheels. This provides the

standard RZR much more stability and they can be re-

moved easily to return to stock width for running 50” trails.

PART # DeSCRiPTion PRiCe/PR

67-142 7/8” Wheel Spacer Kit 104.95

67-143 1 3/4” Wheel Spacer Kit 124.95

Sold per pair.

14

Mud Guard for Polaris 570/800 RZRThe Mud Guard will keep rocks, sticks, and any debris from building

up in your undercarriage on the driver side of your vehicle. It’s com-

patible with SLP Rocker Armor™ and is manufactured from 0.090”

thick aircraft grade aluminum. Fits all 570/800 RZR, RZR-S, and

RZR-4.


67-113 2008-10 800 RZR and RZR-S 62.00

67-114 All 800 RZR-4,

2011-12 570/800 RZR and RZR-S

74.00

Gas Tank Armor for Polaris 570/800 RZRGas Tank Armor is a must have for all 570/800 RZR, RZR-S, and

RZR-4 owners. This product will keep rocks, sticks, and any other

sharp objects from piercing the exposed rear portion of the gas

tank. It is compatible with SLP Rocker Armor™ and is manufactured

from 0.090” thick aircraft grade aluminum.


67-112 570/800 RZR, RZR-S & RZR-4 54.00

67-113 Pictured

Highly recommended for use with Rocker Armor.

*For fuel tank protection on the RZR XP 900, see our

Rocker Armor™ on page 4.

15

Power Commander V from DynojetThe Power Commander V fuel controller from Dynojet gives you full EFI tuning

capability. It plugs into the stock ECU and allows you to add or subtract fuel

from the stock ECU settings. It is based on a throttle position verses RPM fuel

map with input points at ten different throttle positions and in 250 RPM incre-

ments to give you pinpoint accuracy. SLP has created maps to optimize per-

formance and fuel economy for specific combinations. These fuel maps can be

preprogrammed into the controller at no charge for true plug and play capability.

For the experienced tuner, the controller comes with a computer link cable and software for custom

mapping capabilities. No wiring modi-

fications are required (OEM style con-

nectors are supplied) and no

permanent changes are made to your

stock system.

* Note: These models (part numbers 70-141, 70-142 and 70-147) have the ability to manipulate

ignition timing and Rev-Xtend capabilities.



70-141* 2011-12 Polaris 800 RZR, RZR-S and RZR-4 399.95

70-142* 2011 Polaris RZR XP 900 399.95

70-147* 2012 Polaris RZR and RZR-4 XP 900 399.95

Power Commander Accessories for Experienced TunersSLP offers many tuning aids

to help experienced tuners

make their own maps.

Please inquire or visit our

website for more infor-

mation.


70-136 LCD Display 299.99

70-135 1GB SD Card 15.95


70-132 Wideband 2 499.00

70-134 CAN Cable 17.00


70-126 Autotune 279.99

16

Clutch Vents for Polaris 800 RZR, RZR-S and RZR-4These clutch vents are installed into the clutch cover to allow more air to flow into the clutch

enclosure to reduce clutch and belt heat and help maintain proper

performance. It utilizes a special pre-filter material that repels

water and keeps dirt out yet maintains high airflow.

Sold in a set of 2 vents.PART # PRiCe/PAiR

67-108 49.95

ergonomic Grab Handle withWrist Restraint for Polaris RZR,

RZR-S, RZR-4 and RZR XP 900This grab handle is built for comfort and safety! Its curved design

places hands in a natural position for a more comfortable ride for the

passenger. It features Wrist Restraints which keep hands positioned

on or near the grab handle in the case of a roll over. The adjustable straps allow these restraints to

be used by adults or children. The natural tendency in a roll over situation is to let go of the grab

handle and put your hand out to catch the vehicle. When using these restraints, the passenger is

reminded to keep their hands firmly planted on the grab handle.


67-116 Ergonomic Grab Handle with Wrist Restraint for 2008-11 models 79.00

67-115 Wrist Restraint Only for 2008-12 models (only works with stock grab bar) 14.99

17

TeAM Tied Driven Clutch for Polaris RZRThis secondary clutch allows you to change helixes and springs to get the

most performance out of your RZR. The stock secondary clutch that comes on

the 2009 and newer Standard RZR as well as 2010 and newer RZR-S and

RZR-4 is an inexpensive model that has the helix cast into the moveable

sheave of the clutch. Changing to this clutch allows you to use a helix that is

more suitable to your RZR's setup and typical riding conditions. Sold as a

complete assembly less helix and spring.

For a custom SLP recommendation that is specific to your combination, please

call or e-mail ([email protected]) an SLP representative and have the following information available: eleva-

tion you typically ride at, conditions you plan on riding in (i.e.: sand, snow, mud or typical trail), tire

size, engine modifications that add power, and the weight

you have added to your vehicle. Clutch kits available formost popular applications, see pages 18 and 19.

PART # DeSCRiPTion PRiCe/eA.

50-301 RZR Driven Clutch 249.00

Multi-Angle Driven Clutch Helixes for Polaris RZRThese helixes make the RZR more responsive in all conditions and much less prone to RPM and top-

end power loss in higher load conditions (sand, snow, mud etc.) as well as at higher elevations and

when running larger, more aggressive tires.

note: Many RZR models came with a clutch that had the helix cast into the moveable

sheave. On these models, the helix is non-replace-

able (2009 and newer Standard RZR as well as

2010 and newer RZR-S and RZR-4 800). These

models must use the TEAM Tied Clutch shown

above in order to change the helix.*Will not fit 900 XP RZR


50-300* 70-58.33 79.00

50-302* 52 Straight 79.00

50-330 54 Straight 99.00

18

Clutch kits for Polaris RZR SLP clutch kits have been designed and tested to get the most performance

out of your RZR. We have been working with centrifugal clutches for over 40

years, and we know how to tune them to transfer your horsepower to the

ground. In most circumstances, optimizing the clutch setup in your RZR is the

best performance gain for the dollar spent. Through our testing we have found

that the RZR needs two distinctly different clutch setups depending on what

type of terrain that you are riding in.

Trail Clutch kit:The SLP Trail Clutch Kit is designed for RZRs that are typically ridden on semi hard surface trails with the oc-

casional run in muddy or sandy conditions. These Trail Kits have been designed for RZRs running standard

size tires with stock engines. They provide improved throttle response with better top end power and consis-

tency over a broad range of elevations and conditions. If aftermarket performance modifications and/or larger

or more aggressive tires have been added, please let us know so we can tailor your clutch kit accordingly.

Sand, Mud or Large Tire Clutch kit:The SLP Sand, Mud or Large Tire Clutch Kit is designed for RZRs that are primarily ridden in high load envi-

ronments such as sand dunes, sandy, muddy or snow covered trails, or on models that have added larger

more aggressive tires (up to one inch larger than stock). When exposed to these high load conditions, RZR’s

with stock clutching perform poorly, leaving the vehicle with poor throttle response and loss of RPM at wide

open throttle. In many cases the operator has to shift prematurely to low range which reduces wheel speed

and performance. These clutch kits match the power of the engine with the higher loads being applied to it to

keep the throttle response snappy and top end RPM and horsepower at their peak for a much more enjoyable

ride. If aftermarket performance modifications have been added, or if you are running paddles or tires even

larger than specified above, please let us know so we can tailor your clutch kit accordingly.

For clutch kit application chart, see the next page.

19

note: 2008 and 2009 Standard RZR 800 models require shimming for proper belt clearance.Shims and instructions included.

* Requires RZR-S belt Polaris Part #3211133.

Tech Tip:A question we often hear is, “What RPM should I expect my RZR to run at wide open throt-

tle?” This depends on the RZR

you have. The following chart

shows you where we like to rev

the different RZR engines at wide

open throttle (WOT) as well as

where their REV-Limiters are.

DescritpionStock exhaustConfiguration

WoT RPM ReV Limit

2008-10 Standard RZR 800 2 into 1 Manifold 6200-6400 6500

2009-12 RZR-S/ RZR-4 800 Header 6300-6500 6750

2011-12 Standard RZR 800 Header 6300-6500 6750

2011-12 RZR 900 XP Header 8000-8400 8750

elevation 0-4500’ 0-4500’ 4500’ + 4500’+

Description Trail kitSand, Mud orLarger Tires

Trail kitSand, Mud orLager Tires

Model Part # Price Part# Price Part # Price Part# Price

2008 Standard RZR 800* 41-700 233.85 41-800 233.85 41-701 233.85 41-801 233.85

2009-10 Standard RZR 800* 41-702 482.85 41-802 482.85 41-703 482.85 41-803 482.85

2009-10 RZR-S 800 41-704 482.85 41-804 482.85 41-705 482.85 41-805 482.85

2010-11 RZR-4 800 41-706 482.85 41-806 482.85 41-707 482.85 41-807 482.85

2011-12 Standard RZR 800* 41-708 482.85 41-808 482.85 41-709 482.85 41-809 482.85

2011-12 RZR-S 800 41-710 482.85 41-810 482.85 41-711 482.85 41-811 482.85

2011-12 RZR 900 41-712 223.95 41-812 347.90 41-713 223.95 41-813 347.90

Clutch kit Application Chart for Polaris 800/900 RZR

20

Rooster Adjustable Shift Weightsfor Polaris 900 RZR and 900 RZR-4

Get the HP to the ground on your RZR XP 900 with our adjustable Rooster

Weights! They allow you to add the included bolts and washers to the

weights at three different positions, the heel, center, and tip of the weight, to

fine-tune your clutching. They are adjustable from 50 to 70 grams with in-

cluded bolts and washers. This kit utilizes two different thicknesses of wash-

ers and three different weights of bolts for the ultimate in adjustability.

Inquire for recommendation.PART # DeSCRiPTion PRiCe

40-131 Rooster Adjustable Shift Weights (50-70 grams) 199.00

SLP MTX™ Clutch Weights for Polaris 800 RZR except 900 XPSLP's MTX™ Clutch Weights harness the horsepower of your RZR, RZR-S and

RZR-4 by transferring it more efficiently to the wheels. Their unique heavy heel and

special weight profile provide substantially greater shift force, delivering improved

acceleration and top speed. Other benefits include smoother engagement and very

responsive back shift. Adjustable by adding weight via rivets (up to 6 grams per

weight), this weight offers precise tuning ability for your application.

Please inquire for recommendations. Sold per set of 3 including

tuning rivets (6 - 1 gram, 6 - 2 gram and 6 - 3 gram rivets).

RePLACeMenT TUninG RiVeTS, PACkAGe oF 6

PART # WeiGHT PRiCe/SeT

40-129 62 gram 104.95

40-130 65 gram 104.95

PART # MATeRiAL WeiGHT PRiCe/SeT

40-90 aluminum 1 gram 9.95

40-91 steel 2 gram 9.95

40-92 steel 3 gram 9.95

2008-09 Standard RZR requires reshimming. Rivet Set/Removal tool see page 23.

21

Drive Spring for Polaris 570/800/900 RZRThese high quality clutch springs are offered in a variety of spring rates to allow

you to optimize the shift characteristics of your drive clutch. Things such as ele-

vation and tire size can have a dramatic effect on the performance of your RZR.

Ask a representative for more information regarding your specific application.

Part # Color Stripe Color Compression Rate- Pounds Price/[email protected]” @1.25”

40-404 Red Gold 25 175 24.9540-400 Red Gold/Black 55 225 24.9540-401 Red White/Black 65 245 24.9540-402 Red Green/Black 75 260 24.9540-403 Red Gold/Silver 105 260 24.95

Driven Spring for Polaris 570/800/900 RZRThis high quality clutch spring allows you to optimize the shift characteristics

of your driven clutch. Things such as elevation and tire size can have dra-

matic effect on the performance of your RZR. Ask a representative for more

information regarding your specific application.

Part # Color Compression Rate- Pounds Price/[email protected]” @1.05”

40-420 Red 105 165 24.9540-421 Lime Green/ Silver 125 190 24.95

22

Drive Clutch Spider Tool for All Polaris 800/900 RZR This Spider Tool allows the spider assembly in the drive clutch to be removed and

assembled in order to service the rollers and buttons. It is made of high quality steel

to precise specifications, allowing you to remove or install

even the most stubborn spiders easily. PART # PRiCe/eA.

20-75 47.95

SLP Clutch Press Tool has been widely accepted as the most efficient clutch

compression tool available. This revolutionary drive and driven clutch servic-

ing tool is designed specifically for compressing and holding springs for ease

of assembly and disassembly. These tools are specified in many factory re-

pair manuals as a required specialty tool for clutch compression. Wrestling

with the clutch or need for a second person to help is now history. Made

compact, the SLP tool can be used for field testing or production clutch re-

pair on the shop bench. High quality metal construction with powder coated finish provides a quality, functional tool

that is extremely durable. This design incor-

porates adjustable stand-offs that can be

moved in and out to allow proper fit for many

different clutches.

SLP Clutch Press Tool


20-204 Polaris Drive/Driven Clutches (Including ATV,

P2, TEAM Rapid Reaction and Tied Clutches)

99.95

Drive Clutch Spider nut Tool for Polaris 900 XPThis spider nut tool was specifically designed to remove the

jam nut that locks the spider into place on the XP 900.

Not Actual

PicturePART # PRiCe/eA.

20-214 TBA

23

Drive Clutch Pullers for Polaris 570/800/900 RZR These clutch pullers are designed to pull even the toughest ofclutches. Made of high quality heat treated material, these toolsare built to last.


20-207 570 RZR and 800 RZR, RZR-S and RZR-4 28.95

20-136 XP 900 RZR and RZR-4 36.95

Cam Arm Bushing Replacement ToolReplace worn MTX™ clutch weight bushings to maintain best performance.

Reduce wear on weights and rollers due to worn bushings.


20-1 Bushing Tool 6.95

40-28 Replacement Bushing/ ea. 5.25

40-200 Replacement Bushings, 3 pack 15.00

MTX™ Rivet Set/Removal ToolThis tool allows you to fine tune your MTX™ Weights quickly and easily by

setting or removing rivets. Specifically designed to be used in the field (but

can be clamped in a vise for shop use) it is compact and lightweight, yet

robust enough to be used time and time again. PART # PRiCe/eA.

20-155 52.95

#20-207

#20-136

24

Clutch Holding ToolThis premium tool offers the proper method to hold the

drive clutch from rotating while removing or torquing

clutch center bolt or when using a clutch puller. Unlike

other clutch holding tools that are laser cut, this tool

won’t hardmark or damage clutch, making it a far supe-

rior tool. It also features a cushion grip for

comfort. This tool is a must for quick and

easy clutch removal.

Will not hard markclutch like other tools.

Drive Clutch Holding Fixturefor Polaris 800/900 RZRThis Drive Clutch Holding Fixture can be bolted to a bench or clamped in a vise for

solid holding of drive clutch for spider removal when shimming for belt-to-sheave

clearance or servicing the spider. It contacts all clutch webs for maximum support to

eliminate clutch web damage. Features a quick spin thumb nut with knurled edge for

superior grip and center hold down for much greater

holding stability while applying off center torque. PART # PRiCe/kiT

20-162 79.95


20-202 Polaris RZR 34.95

Sheave Clamp Tool for Polaris 800/900 RZRThe sheave clamp tool holds the moveable sheave of the drive clutchin place when collapsed for changing clutch weights without removingouter cover or clutch from crankshaft. An absolute must for field tuning.

PART # PRiCe/eA.

20-161 7.95

25

Miniature Water Temperature GaugeMonitor water temperature easily with these new miniature

gauges. The gauge can be set to read in either Fahrenheit or Celsius. It

registers the current temperature and records maximum temperature. The

display can be mounted either with its Peel-N-Stick backing or bolted on.

Come standards with either a ¾”

or 1” hose splice adapter.

Polaris RZR uses 1” hose


19-103 3/4” (19mm) Hose I.D. Size 44.95

19-104 1” (25mm) Hose I.D. Size 44.95

Tool BagHandy roll-up style bag holds enough tools for trail riding or racing, and

includes a zipper pouch for small tools.

Tools not included

PART # PRiCe/eA.

46-52 19.95

extension Spring HooksSpecial tool made for installing and removing all

exhaust system springs or any spring that requires a

pull to release. Made of stainless steel for

strength and rust resistance.

SiZe PART # PRiCe/eA.

4” 20-89 10.95

6” 20-90 11.50

8” 20-183 11.95

12” 20-210 12.95

26

SLP Team HatThis attractive newly designed hat features a 3D embroidered

SLP logo on the front of the hat with EST. 1972 on the brim. Adjustable rear

closure for one size fits most.

This new hat was specifically designed with the hot summer

months in mind. It utilizes a lightweight breathable fabric shell

with a moisture wicking band to provide maximum comfort even

on the hottest days. Adjustable rear closure for one size fits

most.PART # DeSCRiPTion PRiCe/eA.

60-59 Black 21.95

60-58 Summer Grey 24.95

SLP Team BeanieFor those cold days try one of our SLP Beanies. This

newly designed beanie features a woven logo with embroidered letter-

ing for a great new look. Lined with Thinsulate™ insulation to keep

your head and ears warm and comfortable. One size fits most.

PART # PRiCe/eA.

60-49 19.95

27

SLP DecalsOur SLP Logo is on high quality 3M Transfer material

which is great for your RZR, truck or trailer.

# 60-12

# 60-8

# 60-9


60-41 2-1/4” x 1-1/4” Logo, per each .22

60-12 7” x 3” Logo, per each .95

60-55 7 1/2” x 3 1/2” Oval Logo .95

60-8 11 1/2” x 4” Logo, per each 3.00

60-9 18” x 9 1/2” Logo, per each 7.29

60-57 39” x 18” Oval Logo 25.95

# 60-55

# 60-57

inDeXinDeXAutotune...........................15

Beanie..............................26

Brake Pedal Covers.........10

Bumper, Front....................7

Bumper, Rear.....................9

Bushing Tool, Cam Arms..23

Clutch Holding Fixture......24

Clutch Holding Tool..........24

Clutch Kits...................18-19

Clutch Press Tool.............22

Clutch Pullers...................23

Clutch Spider Tools..........22

Clutch Vents.....................16

Decals..............................27

Doors.................................3

D-ring................................11

Drive Spring......................21

Driven Spring....................21

Front Bumper Support........8

Front Skid Plate..................8

Gas Tank Armor................14

Gauges........................15,25

Glove Box.........................10

Grab Handle.....................16

Half Doors..........................3

Hat....................................26

Helix.................................17

Hood Grill.........................12

Hood Hold Down..............12

Large Tire Clutch Kit....18-19

LCD Display......................15

Lower Radiator Vent.........12

MTX Rivet Removal Tool..23

MTX Weights....................20

Mud Guard.......................14

Muffler 800.........................5

Muffler 900.........................6

PCV..................................15

Power Commander...........15

Radiator Support................8

Radiator Vent Kit..............12

Rear Bumper Kit.................9

Rocker Armor......................4

Rooster Weights...............20

Sand Clutch Kit...........18-19

Secure Storage Box.........10

Sheave Clamp Tool..........24

Silencer 800.......................5

Silencer 900.......................6

Spring Hook Tool..............25

Stickers.............................27

Stinger..............................11

Super Silent Muffler............5

Team Tied Driven Clutch..17

Tool Bag...........................25

Trail Clutch Kit.............18-19

Trailing Arm Guards...........9

Water Temp Gauge Mini...25

Wheel Spacer Kit..............13

Wide Band 2.....................15

PRSRT STDU.S. POSTAGE

PERMIT NO. 96IDAHO FALLS, ID

PAID743 E. Iona Rd. Idaho Falls, ID 83401

(208)529-0244, www.startinglineproducts.com

Change Service Requested

For more information about these productsor to place an order, please contact:

Starting Line Products (208)529-0244

www.startinglineproducts.com

Scan this code with your smart

phone and you will be directed to

the UTV section of our website.

Date post:	10-Mar-2016
Category:	Documents
Upload:	starting-line-products
View:	234 times
Download:	7 times

SLP RZR Catalog 2012

Documents