SLS Linear Fluorescent

Specialised Lighting Solutions

Head Office102-108 Williams Road,

Dandenong , Victoria 3175 Tel: 1300 302 852Fax:1300 301 329

Email: [email protected] LIN

EAR

FLU

ORE

SCEN

T

C

M

Y

CM

MY

CY

CMY

K

SLS_COVER.pdf 1 2/11/2012 11:13:46 AM

Important Information:Complete Terms and Conditions are printed on sales invoices

Notice:SLS is continually working to improve and add new products to the “LINEAR FLUORESCENT” product range. For this and other reasons SLS may make changes to the product details set out in this Product Catalogue without further notice and any supply will be subject to availability at the time of the receipt of your order. On request, SLS will provide amended product particulars or details of suggested alternative or replacement products. This book was printed on December 2012 and may be copyright-protected. No part of the publication including its layout, the compilation of products or images of products may be reproduced by any process, without the written permission of SLS.

Philip IdlePresident – Australasia Region

Presented by the Australasia Region of Council of Educational Facilities

Planners International

2010 Educational Facilities Awards

Winner New School Construction

Baldasso Cortese Pty Ltdfor

St Franc De Sales Primary School

Delivering energy efficient and environmentally friendly solutions

Specialised Lighting Solutions (SLS) is a national leader

in customised lighting solutions for all applications.

SLS can assist all sectors, including retail, industrial,

property management, hospitality as well as a host of

other areas.

We have a unique focus on reducing the total cost of

ownership for all recommended lighting solutions.

Reducing energy consumption, environmental impact

and overall maintenance costs provides our customers

with the best long-term value.

We don’t just sell a product – we provide the ultimate

lighting solution, including:

• eturn on investment proposals

• arbon footprint anal sis

• n house design services

• istribution capabilities

• ro ect management

• amp rec cling

• aintenance scheduling for lamp and ballast replacement

• urn ke suppl investment and maintenance

s part of the roup, e are accredited to standards and can offer the backing of a large organisation

without losing our focus on customer service.

he head office is located in andenong ( ) and e have facilities across ustralia isit our ebsite for

more information or to locate your nearest branch.

ront page t rancis e ales on the best ne school construction a ard at the ustraliasian egiona conference in erth light ttings ere speci ed in the design.

Specialised Lighting Solutions1300 302 [email protected]

C

M

Y

CM

MY

CY

CMY

K

Blurb_Final_with headers.pdf 1 13/11/2012 4:57:54 PM

St. John of God Hospital

ProblemSt. John of God Health Care Group required a new lighting solution to reduce their

overall impact on the environment. They needed a solution they could roll out across

their 13 hospitals in Australia, and began by trialling the products in Bendigo, Victoria.

SolutionSLS supplied a staggering 2,661 units of lights from a variety of manufacturers for the

Bendigo facility. Fluorescent lights of varying types and halogen globes were

replaced with their LED (light emitting diode) alternatives. Aside from the proven

energy savings of LEDs, they also have a considerably longer service life.

ResultsIn some cases, there was a reduced power consumption of up to 76 % per light �tting.

Part of validating the project was to carefully measure outcomes and the hospital has

already reduced overall electricity consumption by 11.13 %, which equates to a

signi�cant saving in both dollar terms and CO2 emissions.

This �gure is expected to reach 12% over time, but based on the initial 11.13 %,

annual electricity usage has been reduced by 264,416 kWh and CO2 emissions have

dropped by approximately 322.6 tonnes per annum. The reduction in CO2 emissions

is equal to the annual consumption of:

• 130 cars (travelling at an average of 15,000km)

• 27 average sized houses

• 6,451,761 black balloons (one black balloon = 50g of carbon pollution)

Testimonial“We trialled about seven different suppliers’ lights and while some other

manufacturers’ products were very good, we believe that SLS’ products are the best.

Aside from product quality, we needed to ensure that our capital investment had the

backing of a large organisation and also needed to work with an organisation that

could provide extensive product choice, supply and lead times.”

Dean Farnsworth

Environmental Engineer

St. John of God Health Care

C

M

Y

CM

MY

CY

CMY

K

Case Study_final_no headers.pdf 1 13/11/2012 5:01:15 PM

Index

Linear Fluorescent

3 3

Recessed

High Performance T5 ULB ...............................................................................................................................................................6

Commercial T5 Diffused ..............................................................................................................................................................7 - 9

High Output T5 Direct/Indirect ........................................................................................................................................................ 10

Asymmetrical T5 Wall Washer ....................................................................................................................................................... 11

Surface Mounted/Suspended

Energy Efficient T5 ULB and Diffused ............................................................................................................................................14

Asymmetrical T5 Surface Mounted Wall Washer ...........................................................................................................................15

Commercial T5 One Piece Moulded Diffuser .................................................................................................................................16

T5 Project Batten.....................................................................................................................................................................17 - 21

Versatile T5 Slimline Linkable ........................................................................................................................................................22

Continuous

Stylish T5 Architectural Extrusion............................................................................................................................................26 - 53

Versatile T5 Linear Trunking System ..................................................................................................................................... . 54 - 55

C

M

Y

CM

MY

CY

CMY

K

CHAPTER DIVIDERS.pdf 1 25/10/2012 2:05:25 PM

Untitled-1 2 25/10/2012 2:58:45 PM

C

M

Y

CM

MY

CY

CMY

K


Untitled-1 3 25/10/2012 2:58:45 PM

Linear Fluorescent - Recessed

66

High Performance T5 ULB

• T-bar/Plaster fitting for easy installation• Sturdy low profile body- only 60mm deep• High quality polyester powder coating, low gloss finish• Low glare parabolic aluminium louvre• Options: Semi specular louvre or specular louvre• Available with air slots (T-bar only)• Electronic ballast; available in dimmable ballast and emergency version• 1.7m flex & 3pin plug• Application: General commercial interior, office, education facilities, retail stores and shopping centres

Item No. Item DescriptionSLS101.001 TROFFER 1X14W TBAR R/CES SPCLR LOUVRE W295XD60XL595MMSLS101.002 TROFFER 1X28W TBAR R/CES SPCLR LOUVRE W295XD60XL595MMSLS101.003 TROFFER 1X54W TBAR R/CES SPCLR LOUVRE W295XD60XL1195MMSLS101.004 TROFFER 2X14W TBAR R/CES SPCLR LOUVRE W295XD63XL1195MMSLS101.005 TROFFER 2X28W TBAR R/CES SPCLR LOUVRE W295XD63XL1195MMSLS101.006 TROFFER 3X14W TBAR R/CES S/SPCLR LOUVRE W595XD63XL595MMSLS101.007 TROFFER 4X14W TBAR R/CES S/SPCLR LOUVRE W595XD63XL595MMSLS101.008 TROFFER 2X14W P/BRD R/CES S/SPCLR LOUVRE W295XD63XL595MMSLS101.009 TROFFER 2X28W P/BRD R/CES S/SPCLR LOUVRE W295XD63XL1195MMSLS101.010 TROFFER 3X14W P/BRD R/CES S/SPCLR LOUVRE W595XD63XL595MMSLS101.011 TROFFER 4X14W P/BRD R/CES S/SPCLR LOUVRE W595XD63XL595MM


7 7

Commercial T5 Diffused

• Effortless installation, maintenance and ease of wiring• Designed for use in suspended ceilings of two way exposed T-bar• High quality powder coating• Suitable for lay in or hinged frame diffuser panels• Diffuser Options: Prismatic, Y5, K12, K15, K19, opal or dished• Available in 595mm width• Electronic ballast, available in dimmable ballast and emergency version• 1.7m flex & 3pin plug• Application: General commercial interior, office, education facilities, retail stores and shopping centres

Item No. Item DescriptionSLS101.012 TROFFER 2X14W TBAR R/CES PRIS/DIFF W295XD52XL610MMSLS101.013 TROFFER 3X14W TBAR R/CES PRIS/DIFF W295XD52XL610MMSLS101.014 TROFFER 2X28W TBAR R/CES PRIS/DIFF W295XD52XL1210MMSLS101.015 TROFFER 3X28W TBAR R/CES PRIS/DIFF W295XD52XL1210MM


88


• Robust steel body with high quality powder coat finish• Plaster recessed• Applicable to timber and metal rail fixing• Complete with adjustable suspension brackets• Suitable for lay in or hinged frame diffuser panels• Diffuser options: Prismatic, Y5, K12, K15, K19, opal or dished• Electronic ballast, available in dimmable ballast and emergency version• 1.7m flex & 3pin plug• Application: General commercial interior, office, education facilities, common area, halls and shopping centres

Item No. Item DescriptionSLS101.016 TROFFER 2X14W P/BRD R/CESS PRIS/DIFF W295XD70XL595SLS101.017 TROFFER 3X14W P/BRD R/CESS PRIS/DIFF W295XD70XL595SLS101.018 TROFFER 3X14W P/BRD R/CES PRIS/DIFF W595XD70XL595SLS101.019 TROFFER 4X14W P/BRD R/CES PRIS/DIFF W595XD70XL595SLS101.020 TROFFER 2X28W P/BRD R/CES PRIS/DIFF W295XD70XL1195SLS101.021 TROFFER 3X28W P/BRD R/CES PRIS/DIFF W295XD70XL1195


9 9


• High efficency troffer with Y5 diffuser• Suitable for T-bar and plaster ceilings• Die-formed cold rolled steel body• Six-stages phosphate pre-treatment coating to ensure superior paint adhesion and rust resistance• High reflectance gloss, baked white polyester powder• Mirror finish high purity aluminium reflector• Electronic control gear and flex&plug• Application: General commercial interior, office, education facilities and common area

Item No. Item DescriptionSLS101.022 TROFFER 1X54W TBAR R/CES Y5/DIFF W593XD85XL1193MMSLS101.023 TROFFER 1X54W P/BRD R/CES Y5/DIFF W296XD85XL1236MM


1010

High Output T5 Direct/Indirect

• Direct/indirect high output luminaire• T-bar or plaster recessed• Fabricated from steel with high quality powder coated finish• Fitted with high reflectance reflector and perforated diffuser• Available with ultra low brightness louvre• Plaster recessed applicable to timber and metal rail fixing; supplied with adjustable suspension brackets• Electronic ballast, available in dimmable ballast and emergency version• 1.7m flex & 3pin plug• Application: commerical interior, office, boardroom, education facilities

Item No. Item DescriptionSLS101.024 LIGHT FLUOR 1X14W TBAR R/CES DIR/INDIR W595XD125XL595MMSLS101.025 LIGHT FLUOR 2X14W TBAR R/CES DIR/INDIR W595XD125XL595MMSLS101.026 LIGHT FLUOR 1X24W TBAR R/CES DIR/INDIR W595XD125XL595MMSLS101.027 LIGHT FLUOR 2X24W TBAR R/CES DIR/INDIR W595XD125XL595MMSLS101.028 LIGHT FLUOR 1X28W TBAR R/CES DIR/INDIR W295XD125XL1195MMSLS101.029 LIGHT FLUOR 2X28W TBAR R/CES DIR/INDIR W295XD125XL1195MMSLS101.030 LIGHT FLUOR 1X54W TBAR R/CES DIR/INDIR W295XD125XL1195MMSLS101.031 LIGHT FLUOR 2X54W TBAR R/CES DIR/INDIR W295XD125XL1195MMSLS101.032 LIGHT FLUOR 1X14W P/BRD R/CES DIR/INDIR W595XD125XL595MMSLS101.033 LIGHT FLUOR 2X14W P/BRD R/CES DIR/INDIR W595XD125XL595MMSLS101.034 LIGHT FLUOR 1X24W P/BRD R/CES DIR/INDIR W595XD125XL595MMSLS101.035 LIGHT FLUOR 2X24W P/BRD R/CES DIR/INDIR W595XD125XL595MMSLS101.036 LIGHT FLUOR 1X28W P/BRD R/CES DIR/INDIR W295XD125XL1195MMSLS101.037 LIGHT FLUOR 2X28W P/BRD R/CES DIR/INDIR W295XD125XL1195MMSLS101.038 LIGHT FLUOR 1X54W P/BRD R/CES DIR/INDIR W295XD125XL1195MMSLS101.039 LIGHT FLUOR 2X54W P/BRD R/CES DIR/INDIR W295XD125XL1195MM


11 11

Asymmetrical T5 Wall Washer

• Wall washer designed to provide even vertical illumination• Die-formed cold roll steel housing• White polyester powder coating• Mirror anodised aluminium reflector to provide overall reflectance of 87%• T-bar or plaster recessed• Electronic ballast and flex&plug• Applications: office, commerical interior, retail and educational institutions

Item No. Item DescriptionSLS101.040 LIGHT FLUOR 2X14W TBAR R/CES W/WSHR W225XD105XL595MMSLS101.041 LIGHT FLUOR 2X28W TBAR R/CES W/WSHR W225XD105XL1195MMSLS101.042 LIGHT FLUOR 2X14W P/BRD R/CES W/WSHR W225XD105XL595MMSLS101.043 LIGHT FLUOR 2X28W P/BRD R/CES W/WSHR W225XD105XL1195MM

C

M

Y

CM

MY

CY

CMY

K


Untitled-1 4 25/10/2012 2:58:58 PM

C

M

Y

CM

MY

CY

CMY

K


Untitled-1 5 25/10/2012 2:58:58 PM

Linear Fluorescent - Surface mounted/suspended

1414

Energy Efficient T5 ULB and Diffused

• Fabricated from steel• Powder coated white• Energy efficient with low glare• Options: semi specular louvre or specular louvre, K12 diffuser, K19 diffuser or K19 silver tint• Electronic Ballast; available in dimmable ballast and emergency version• Application: General commercial interior, office, retail and educational institutions

Item No. Item DescriptionSLS102.001 LIGHT FLUOR 2X14W S/MTG S/SPCLR LOUVRE W270XD60XL595MMSLS102.002 LIGHT FLUOR 2X28W S/MTG S/SPCLR LOUVRE W270XD60XL1195MMSLS102.003 LIGHT FLUOR 2X54W S/MTG S/SPCLR LOUVRE W270XD60XL1195MMSLS102.004 LIGHT FLUOR 3X14W S/MTG SPCLR LOUVRE W595XD60XL595MMSLS102.005 LIGHT FLUOR 4X14W S/MTG SPCLR LOUVRE W595XD60XL595MMSLS102.006 LIGHT FLUOR 2X14W S/MTG PRIS/DIFF W295XD70XL595MMSLS102.007 LIGHT FLUOR 2X28W S/MTG PRIS/DIFF W295XD70XL1195MMSLS102.008 LIGHT FLUOR 2X54W S/MTG PRIS/DIFF W295XD70XL1195MM


15 15

Asymmetrical T5 Surface Mounted Wall Washer

• Wall washer designed to provide even vertical illumination• Die-formed cold roll steel housing• White polyester powder coating• Mirror anodised aluminium reflector to provide overall reflectance of 87%• Surface mounted• Electronic ballast and flex&plug• Application: office, commerical interior, retail and educational institutions

Item No. Item DescriptionSLS102.009 LIGHT FLUOR 2X14W S/MTG W/WSHR W225XD105XL595MMSLS102.010 LIGHT FLUOR 2X28W S/MTG W/WSHR W225XD105XL1195MM


1616

Commercial T5 One Piece Moulded Diffuser

• One piece fully moulded prismatic diffuser with refracted sides for excellent glare control• Surface mounted• Options: suspension kit• Available in 295mm wide body• Available in T8• Electronic ballast; available in dimmable ballast and emergency version• Applications: Schools, hospitals, walkways, libraries, general commercial interior

Item No. Item DescriptionSLS102.011 LIGHT FLUOR 1X14W S/MTG PRIS/DIFF N/BDY W110XD80XL650MMSLS102.012 LIGHT FLUOR 1X28W S/MTG PRIS/DIFF N/BDY W110XD80XL1260MMSLS102.013 LIGHT FLUOR 1X35W S/MTG PRIS/DIFF N/BDY W110XD80XL1560MMSLS102.014 LIGHT FLUOR 2X14W S/MTG PRIS/DIFF N/BDY W190XD80XL650MMSLS102.015 LIGHT FLUOR 2X28W S/MTG PRIS/DIFF N/BDY W190XD80XL1260MMSLS102.016 LIGHT FLUOR 2X35W S/MTG PRIS/DIFF N/BDY W190XD80XL1560MMSLS102.017 LIGHT FLUOR 2X14W S/MTG PRIS/DIFF WD/BDY W295XD80XL650MMSLS102.018 LIGHT FLUOR 3X14W S/MTG PRIS/DIFF WD/BDY W295XD80XL650MMSLS102.019 LIGHT FLUOR 2X28W S/MTG PRIS/DIFF WD/BDY W295XD80XL1260MMSLS102.020 LIGHT FLUOR 3X28W S/MTG PRIS/DIFF WD/BDY W295XD80XL1260MMSLS102.021 LIGHT FLUOR 2X35W S/MTG PRIS/DIFF WD/BDY W295XD80XL1560MMSLS102.022 LIGHT FLUOR 3X35W S/MTG PRIS/DIFF WD/BDY W295XD80XL1560MM


17 17

T5 Project Batten

• Easy to install• Steel fabricated body, powder coated• Various accessories available- wire guard, prismatic diffuser, opal diffuser, diffused wireguard• Single and twin lamp version• Electronic ballast; available in dimmable ballast and emergency version• Available in T8• Applications: General domestic and commercial interiors, retail, factories and warehouses

Item No. Item DescriptionSLS102.023 LIGHT FLUOR 1X14W B/BATTN W65XD68XL570MMSLS102.024 LIGHT FLUOR 1X21W B/BATTN W65XD68XL870MMSLS102.025 LIGHT FLUOR 1X28W B/BATTN W65XD68XL1170MMSLS102.026 LIGHT FLUOR 1X54W B/BATTN W65XD68XL1170MMSLS102.027 LIGHT FLUOR 1X35W B/BATTN W65XD68XL1470MMSLS102.028 LIGHT FLUOR 2X14W B/BATTN W115XD68XL570MMSLS102.029 LIGHT FLUOR 2X21W B/BATTN W115XD68XL870MMSLS102.030 LIGHT FLUOR 2X28W B/BATTN W115XD68XL1170MMSLS102.031 LIGHT FLUOR 2X24W B/BATTN W115XD68XL1170MMSLS102.032 LIGHT FLUOR 2X35W B/BATTN W115XD68XL1470MM


1818

T5 Project Batten


Item No. Item DescriptionSLS102.033 LIGHT FLUOR 1X14W BATTEN W/G W75XD90XL570MMSLS102.034 LIGHT FLUOR 1X21W BATTEN W/G W75XD90XL870MMSLS102.035 LIGHT FLUOR 1X28W BATTEN W/G W75XD90XL1170MMSLS102.036 LIGHT FLUOR 1X54W BATTEN W/G W75XD90XL1170MMSLS102.037 LIGHT FLUOR 1X35W BATTEN W/G W75XD90XL1470MMSLS102.038 LIGHT FLUOR 2X14W BATTEN W/G W125XD90XL570MMSLS102.039 LIGHT FLUOR 2X21W BATTEN W/G W125XD90XL870MMSLS102.040 LIGHT FLUOR 2X28W BATTEN W/G W125XD90XL1170MMSLS102.041 LIGHT FLUOR 2X54W BATTEN W/G W125XD90XL1170MMSLS102.042 LIGHT FLUOR 2X35W BATTEN W/G W125XD90XL1470MM


19 19

T5 Project Batten


Item No. Item DescriptionSLS102.043 LIGHT FLUOR 1X14W PRIS/DIFF BATTEN W70XD102XL575MMSLS102.044 LIGHT FLUOR 1X21W PRIS/DIFF BATTEN W70XD102XL875MMSLS102.045 LIGHT FLUOR 1X28W PRIS/DIFF BATTEN W70XD102XL1175MMSLS102.046 LIGHT FLUOR 1X54W PRIS/DIFF BATTEN W70XD102XL1175MMSLS102.047 LIGHT FLUOR 1X35W PRIS/DIFF BATTEN W70XD102XL1475MMSLS102.048 LIGHT FLUOR 2X14W PRIS/DIFF BATTEN W118XD102XL575MMSLS102.049 LIGHT FLUOR 2X21W PRIS/DIFF BATTEN W118XD102XL875MMSLS102.050 LIGHT FLUOR 2X28W PRIS/DIFF BATTEN W118XD102XL1175MMSLS102.051 LIGHT FLUOR 2X54W PRIS/DIFF BATTEN W118XD102XL1175MMSLS102.052 LIGHT FLUOR 2X35W PRIS/DIFF BATTEN W118XD102XL1475MM


2020

T5 Project Batten


Item No. Item DescriptionSLS102.053 LIGHT FLUOR 1X14W OPAL/DIFF BATTEN W70XD102XL575MMSLS102.054 LIGHT FLUOR 1X21W OPAL/DIFF BATTEN W70XD102XL875MMSLS102.055 LIGHT FLUOR 1X28W OPAL/DIFF BATTEN W70XD102XL1175MMSLS102.056 LIGHT FLUOR 2X28W OPAL/DIFF BATTEN W70XD102XL1175MMSLS102.057 LIGHT FLUOR 1X35W OPAL/DIFF BATTEN W70XD102XL1475MMSLS102.058 LIGHT FLUOR 2X14W OPAL/DIFF BATTEN W118XD102XL575MMSLS102.059 LIGHT FLUOR 2X21W OPAL/DIFF BATTEN W118XD102XL875MMSLS102.060 LIGHT FLUOR 2X28W OPAL/DIFF BATTEN W118XD102XL1175MMSLS102.061 LIGHT FLUOR 2X54W OPAL/DIFF BATTEN W118XD102XL1175MMSLS102.062 LIGHT FLUOR 2X35W OPAL/DIFF BATTEN W118XD102XL1475MM


21 21

T5 Project Batten


Item No. Item DescriptionSLS102.063 LIGHT FLUOR 1X14W PRIS/DIFF BATTEN W/G W49XD107XL575MMSLS102.064 LIGHT FLUOR 1X21W PRIS/DIFF BATTEN W/G W49XD107XL875MMSLS102.065 LIGHT FLUOR 1X28W PRIS/DIFF BATTEN W/G W49XD107XL1175MMSLS102.066 LIGHT FLUOR 1X35W PRIS/DIFF BATTEN W/G W49XD107XL1475MMSLS102.067 LIGHT FLUOR 2X14W PRIS/DIFF BATTEN W/G W85XD107XL575MMSLS102.068 LIGHT FLUOR 2X21W PRIS/DIFF BATTEN W/G W85XD107XL75MMSLS102.069 LIGHT FLUOR 2X28W PRIS/DIFF BATTEN W/G W85XD107XL1175MMSLS102.070 LIGHT FLUOR 2X35W PRIS/DIFF BATTEN W/G W85XD107XL1475MM


2222

Versatile T5 Slimline Linkable

• Slimline linkable fluoresecent; can link up to six units• Chrome housing; white end caps• Aluminium reflector• Reeded diffuser• On/off switch• Can be linked with 200mm or 500mm connector; allows linkable to go around corners• Electronic ballast• Includes mounting kit• 1.5M flex and plug• Applications: cove and pelmet lighting, under cabinet lighting

Item No. Item DescriptionSLS102.071 LIGHT FLUOR 1X8W SLIMLINE LINKABLE F&P W50XD25XL350MMSLS102.072 LIGHT FLUOR 1X14W SLIMLINE LINKABLE F&P W50XD25XL350MMSLS102.073 LIGHT FLUOR 1X21W SLIMLINE LINKABLE F&P W50XD25XL910MMSLS102.074 LIGHT FLUOR 1X28W SLIMLINE LINKABLE F&P W50XD25XL1210MMSLS102.075 LIGHT FLUOR 1X35W SLIMLINE LINKABLE F&P W50XD25XL1510MM

C

M

Y

CM

MY

CY

CMY

K

Chapter divider-Continuous.pdf 3 13/11/2012 3:44:21 PM

C

M

Y

CM

MY

CY

CMY

K

Chapter divider-Continuous.pdf 3 13/11/2012 3:44:21 PM

Linear Fluorescent - Continuous

2626

Stylish T5 Architectural Extrusion

• Miniature square profile creates versatile options for discreet lighting• Applications range from continuous suspended systems, pendant modules, recessed, edge lighting and wall mount task lighting• Up-light slot option available in non-continuous only• Louvre & diffuser options: clear reed, opal reed, satin reed, satin louvre and mirror louvre• Options: anodised or powder coat finish• Available with screwless end cap• Available in IP54 weatherproof

Item No. Item DescriptionSLS103.001 LIGHT FLUOR 1X28W UNIV ARCHI SQ/BDY W55XD62MM


27 27


• Architectural beam profile with discreet shadow edge diffuser feature• Applications range from continuous suspended systems, pendant modules, recessed, edge lighting and wall mount task lighting• Louvre & diffuser options: clear reed, opal reed, satin reed, satin louvre and mirror louvre• Options: anodised or powder coat finish• Available with screwless end cap• Available in IP54 weatherproof



2828


• Modern structural beam profile• Applications range from continuous suspended systems, pendant modules, recessed, edge lighting and wall mount task lighting• Louvre & diffuser options: clear reed, opal reed, satin reed, satin louvre and mirror louvre• Options: anodised or powder coat finish• Available with screwless end cap• Available in IP54 weatherproof

Item No. Item DescriptionSLS103.003 LIGHT FLUOR 1X28W UNIV ARCHI N/BDY W59XD104MM


29 29


• Modern structural beam profile with discreet shadow edge diffuser feature• Applications range from continuous suspended systems, pendant modules, recessed, edge lighting and wall mount task lighting• Louvre & diffuser options: clear reed, opal reed, satin reed, satin louvre and mirror louvre• Options: anodised or powder coat finish• Available with screwless end cap• Available in IP54 weatherproof



3030


• Modern structural beam profile with direct and indirect lighting function• Applications range from continuous suspended systems, pendant modules, cantilevered or wall mount task lighting and wall washing• Louvre & diffuser options: clear reed, opal reed, satin reed, satin louvre and mirror louvre• Options: anodised or powder coat finish• Available with screwless end cap

Item No. Item DescriptionSLS103.005 LIGHT FLUOR 1X28W UNIV ARCHI N/BDY DIR/INDIR W59XD140MM


31 31


• Modern structural beam profile with direct and indirect lighting function• Discreet shadow edge diffuser feature• Applications range from continuous suspended systems, pendant modules, wall mount task lighting and wall washing• Louvre & diffuser options: clear reed, opal reed, satin reed, satin louvre and mirror louvre• Options: anodised or powder coat finish• Available with screwless end cap• Available with separate circuit



3232


• Modern structural beam profile with direct and indirect lighting function• Applications range from continuous suspended systems, pendant modules, cantilevered or wall mount task lighting and wall washing• Up-light slot option available in non-continuous only• Louvre & diffuser options: clear reed, opal reed, satin reed, satin louvre and mirror louvre• Options: anodised or powder coat finish• Available with screwless end cap and IP54 weatherproof

Item No. Item DescriptionSLS103.007 LIGHT FLUOR 1X28W UNIV ARCHI SQ/BDY DIR/INDIR W80XD104MM


33 33


• Modern structural beam profile with direct and indirect lighting function• High output twin lamp with Up-light slot option available• Applications range from continuous suspended systems, pendant modules, cantilevered or wall mount task lighting and wall washing• Louvre & diffuser options: clear reed, opal reed, satin reed, satin louvre and mirror louvre• Options: anodised or powder coat finish• Available with screwless end cap



3434


• Universal linear profile• Applications range from continuous suspended systems, pendant modules, recessed, edge lighting and wall mount task lighting• Louvre & diffuser options: clear reed, opal reed, satin reed, satin louvre and mirror louvre• Options: anodised or powder coat finish• Available with screwless end cap• Available in IP54 weatherproof



35 35


• Universal linear profile with discreet shadow edge diffuser feature• Applications range from continuous suspended systems, pendant modules, recessed, edge lighting and wall mount task lighting• Louvre & diffuser options: clear reed, opal reed, satin reed, satin louvre and mirror louvre• Options: anodised or powder coat finish• Available with screwless end cap• Available in IP54 weatherproof



3636


• Universal linear beam profile• Applications range from continuous suspended systems, pendant modules, recessed, edge lighting and wall mount task lighting• Up-light slot option available in non-continuous only• Louvre & diffuser options: clear reed, opal reed, satin reed, satin louvre and mirror louvre• Options: anodised or powder coat finish• Available with screwless end cap and IP54 weatherproof

Item No. Item DescriptionSLS103.011 LIGHT FLUOR 1X28W UNIV ARCHI RECT/BDY W140XD70MM


37 37





3838


• Universal linear beam profile with discreet shadow edge diffuser feature• Applications range from continuous suspended systems, pendant modules, recessed, edge lighting and wall mount task lighting• Up-light slot option available in non-continuous only• Louvre & diffuser options: clear reed, opal reed, satin reed, satin louvre and mirror louvre• Options: anodised or powder coat finish• Available with screwless end cap and IP54 weatherproof



39 39





4040


• Universal linear beam profile• Multi-sectional construction offers an array of lighting solutions• Applications range from continuous suspended systems, pendant modules, recessed, edge lighting and wall mount task lighting• Up-light option available• Louvre & diffuser options: clear reed, opal reed, satin reed, satin louvre and mirror louvre• Options: anodised or powder coat finish• Available with screwless end cap and IP54 weatherproof



41 41


• Modern blade profile with ribbed external surface• Applications range from continuous suspended systems, pendant modules, and wall mount task lighting• Up-light slot option available in non-continuous only• Louvre & diffuser options: clear reed, satin reed, satin louvre and mirror louvre• Options: anodised or powder coat finish• Available with screwless end cap

Item No. Item DescriptionSLS103.016 LIGHT FLUOR 1X28W UNIV ARCHI CVD/BDY W232XD65MM


4242


• Stylish curved profile• Modular construction provides for a variety of lighting solutions• Applications range from continuous suspended systems, pendant modules, and task lighting• Up-light slot option available in non-continuous only• Louvre & diffuser options: clear reed, opal reed, satin reed, satin louvre and mirror louvre• Options: anodised or powder coat finish• Available with screwless end cap and IP54 weatherproof option



43 43


• Elegant indirect pendant with clear reeded diffuser• High output indirect lighting boosted with faceted reflector• Suits any open plan environment such as office interiors, libraries, schools• Options: anodised or powder coat finish



4444


• Unique, geometric profile• Ideal for open plan offices, feature pendants and aisle light• High performance lamp optics• Up-light diffuser option available• Applications range from continuous pendant system, single modules and cornice lighting• Wall bracket accessories available• Options: anodised or powder coat finish

Item No. Item DescriptionSLS103.019 LIGHT FLUOR 1X28W UNIV ARCHI TRI/BDY W164XD144MM


45 45


• Classical extruded ellipse profile• Integral suspension wire track• Applications range from continuous suspended systems, pendant modules, and wall mount task lighting• Up-light slot option available in non-continuous only• Louvre & diffuser options: clear reed, opal reed, satin reed, satin louvre and mirror louvre• Options: anodised or powder coat finish• Available with screwless end cap



4646


• Contemporary sharp edge profile• Satin microsphere diffuser with clip-in service• Screening reflector insert option available• Applications range from continuous suspended systems, surface mounted, semi-recessed, suspended, wall mounted, wall washing and feature lighting• Options: anodised or powder coat finish• Available with screwless end cap



47 47


• Architectural twin diffuser profile• High efficiency distribution• Satin reeded diffuser with clip-in service• Screening reflector insert option• Application range from continuous suspended systems, surface mount, semi-recessed, suspended and wall mount feature lighting• Options: anodised or powder coat finish• Available with screwless end cap

Item No. Item DescriptionSLS103.022 LIGHT FLUOR 2X28W UNIV ARCHI INNER TWIN/DIFF W295XD60MM


4848


• Architectural twin diffuser profile• High efficiency distribution• Satin reeded diffuser with clip-in service• Screening reflector insert option• Application range from continuous suspended systems, surface mount, semi-recessed, suspended and wall mount feature lighting• Options: anodised or powder coat finish• Available with screwless end cap

Item No. Item DescriptionSLS103.023 LIGHT FLUOR 2X28W UNIV ARCHI OUTER TWIN/DIFF W295XD55MM


49 49


• Non-obtrusive compact profile with clear reeded diffuser• Surface mount• Applications range from continuous systems, modular units, cornice edge lighting and wall mount task lighting• Options: anodised or powder coat finish• Available with screwless end cap and IP54 weatherproof

Item No. Item DescriptionSLS103.024 LIGHT FLUOR 1X28W S/MTG DIFF CVD/BDY W70XD55MM


5050


• Compact architectural extrusion surface mount• Twin lamp with clear reeded diffuser• Applications range from continuous systems, modular units, cornice edge lighting and wall mount task lighting• Options: anodised or powder coat finish• Available with screwless end cap and IP54 weatherproof

Item No. Item DescriptionSLS103.025 LIGHT FLUOR 2X28W S/MTG DIFF CVD/BDY W70XD55MM


51 51


• Versatile curved profile with integral uplight• Clear reeded diffuser• Application range from continuous systems, modules, wall mount task lighting• Options: anodised or powder coat finish

Item No. Item DescriptionSLS103.026 LIGHT FLUOR 1X28W UNIV DIFF CVD/BDY DIR/INDIR W70XD110MM


5252


• Versatile curved profile with integral uplight• Clear reeded diffuser• Application range from continuous systems, modules, wall mount task lighting• Options: anodised or powder coat finish

Item No. Item DescriptionSLS103.027 LIGHT FLUOR 1X28W UNIV DIFF CVD/BDY DIR/INDIR W100XD160MM


53 53


• Robust, extruded aluminium hand rail luminaire• Polycarbonate clear reeded diffuser• Integral silicone diffuser seals• Stainless steel, Torx-head security screws• Full range of cable gland and fastener options for site fixing• 20um anodised finish on all aluminium components provides for maximum corrosion resistance• IP 65 Ingress protection• Ideal for public walkways, access ramps, bridges and many other exterior structures

Item No. Item DescriptionSLS103.028 LIGHT FLUOR 1X28W ROUND HAND RAIL IP65 75MM


5454

Versatile T5 Linear Trunking System

• Linear trunking luminaire with upward light slots• Can be used individually or suspended on trunking for continuous runs• Trunking system provides multiple enclosed cabling and multiple wire suspension points as required• Complete with heavy duty plug connectors, cables & cover plates for quick and simple installation• Available with dual circuit option allowing separate switching

Item No. Item DescriptionSLS103.029 LIGHT FLUOR 2X14W LINEAR TRUNK LINE W280XD132MMSLS103.030 LIGHT FLUOR 2X28W LINEAR TRUNK LINE W280XD132MMSLS103.031 LIGHT FLUOR 2X35W LINEAR TRUNK LINE W280XD132MMSLS103.032 LIGHT FLUOR 2X54W LINEAR TRUNK LINE W280XD132MM


55 55

Versatile T5 Linear Trunking System

• Linear trunking luminaire with perforated reflector• Zinc steel body• Can be used individually or suspended on trunking for continuous runs• Trunking system provides multiple enclosed cabling and multiple wire suspension points as required• Powder coat finish• Available with ULB• Available in various colours• Complete with heavy duty plug connectors, cables & cover plates for quick and simple installation• Available with dual circuit option allowing separate switching• Available in emergency version

Item No. Item DescriptionSLS103.033 LIGHT FLUOR 1X28W LINEAR TRUNK LINE PERF REFL W202XD125MMSLS103.034 LIGHT FLUOR 1X54W LINEAR TRUNK LINE PERF REFL W202XD125MMSLS103.035 LIGHT FLUOR 2X28W LINEAR TRUNK LINE PERF REFL W202XD125MMSLS103.036 LIGHT FLUOR 1X28W LINEAR TRUNK LINE PERF REFL W202XD125MM

Index - By Item Number

5656

Item Number PageSLS101.001 6SLS101.002 6SLS101.003 6SLS101.004 6SLS101.005 6SLS101.006 6SLS101.007 6SLS101.008 6SLS101.009 6SLS101.010 6SLS101.011 6SLS101.012 7SLS101.013 7SLS101.014 7SLS101.015 7SLS101.016 8SLS101.017 8SLS101.018 8SLS101.019 8SLS101.020 8SLS101.021 8SLS101.022 9SLS101.023 9SLS101.024 10SLS101.025 10SLS101.026 10SLS101.027 10SLS101.028 10SLS101.029 10SLS101.030 10SLS101.031 10SLS101.032 10SLS101.033 10SLS101.034 10SLS101.035 10SLS101.036 10SLS101.037 10SLS101.038 10SLS101.039 10SLS101.040 11SLS101.041 11SLS101.042 11SLS101.043 11SLS102.001 14SLS102.002 14SLS102.003 14SLS102.004 14SLS102.005 14SLS102.006 14SLS102.007 14SLS102.008 14SLS102.009 15SLS102.010 15SLS102.011 16SLS102.012 16SLS102.013 16SLS102.014 16SLS102.015 16SLS102.016 16

Item Number PageSLS102.017 16SLS102.018 16SLS102.019 16SLS102.020 16SLS102.021 16SLS102.022 16SLS102.023 17SLS102.024 17SLS102.025 17SLS102.026 17SLS102.027 17SLS102.028 17SLS102.029 17SLS102.030 17SLS102.031 17SLS102.032 17SLS102.033 18SLS102.034 18SLS102.035 18SLS102.036 18SLS102.037 18SLS102.038 18SLS102.039 18SLS102.040 18SLS102.041 18SLS102.042 18SLS102.043 19SLS102.044 19SLS102.045 19SLS102.046 19SLS102.047 19SLS102.048 19SLS102.049 19SLS102.050 19SLS102.051 19SLS102.052 19SLS102.053 20SLS102.054 20SLS102.055 20SLS102.056 20SLS102.057 20SLS102.058 20SLS102.059 20SLS102.060 20SLS102.061 20SLS102.062 20SLS102.063 21SLS102.064 21SLS102.065 21SLS102.066 21SLS102.067 21SLS102.068 21SLS102.069 21SLS102.070 21SLS102.071 22SLS102.072 22SLS102.073 22SLS102.074 22SLS102.075 22

Item Number PageSLS103.001 26SLS103.002 27SLS103.003 28SLS103.004 29SLS103.005 30SLS103.006 31SLS103.007 32SLS103.008 33SLS103.009 34SLS103.010 35SLS103.011 36SLS103.012 37SLS103.013 38SLS103.014 39SLS103.015 40SLS103.016 41SLS103.017 42SLS103.018 43SLS103.019 44SLS103.020 45SLS103.021 46SLS103.022 47SLS103.023 48SLS103.024 49SLS103.025 50SLS103.026 51SLS103.027 52SLS103.028 53SLS103.029 54SLS103.030 54SLS103.031 54SLS103.032 54SLS103.033 55SLS103.034 55SLS103.035 55SLS103.036 55

REFERENCE SECTION

TABLE OF CONTENTS

INGRESS PROTECTION (IP) RATINGS TO AS 1939 ..............................................

LAMP BASES .....................................................................................................

FLUORESCENT LAMP BASES ..............................................................................

LIGHTING AND FORMULA REFERENCE TABLES ...................................................

METRIC TO IMPERIAL CONVERSION TABLES .......................................................

ABBREVIATIONS ...............................................................................................

R1

R2 - R4

R5- R6

R7

R8

R9

REFERENCE SECTION REFERENCE SECTION

X Protection unspecified (untested) X Protection unspecified (untested)

O No special protection provided O No special protection provided

1Protection of hand against accidental access to dangerous parts, and protection of equipment against objects larger than 50mm*

1 Protection against drops of water falling vertically

2Protection of fingers against access to dangerous parts and protection of equipment against objects larger than 12mm*

2Protection against drops of water falling vertically when the object is tilted by up to 15° from its normal position (in any direction)

3 Protection against objects larger than 2.5mm* (e.g. tools, wires) 3 Protection against spraying water at up to 60°

from the vertical

4 Protection against objects larger than 1 mm* (e.g. fine tools, small wires) 4 Protection against splashing and spraying of

water from all practicable directions

5Protection against entry of dust in sufficient quantity to interfere with satisfactory operation of equipment

5 Protection against a low pressure jet of water from all practicable directions

6 Complete protection against entry of dust 6 Protection against heavy seas or a strong jet of water from all practicable directions

* This dimension applies to the smallest of the three mutually perpendicular dimensions of the object against which protection is provided.

“Flash” symbol indicates dangerous parts (live or moving)

7 Protection against immersion

8 Protection against submersion (tests subject to agreement, but no less severe than numeral 7)

The fact that electrical equipment is certified as being of a particular type of Explosion Protection does not mean that it automatically has a degree of protection against weather or environment. Therefore if equipment is to be used in an outdoor environment care should be taken to ensure that it has appropriate IP Rating, as shown in the table.

INGRESS PROTECTION ( IP) RATINGS TO AS 1939

The IP Code indicates the degree of protection provided by enclosures for electrical equipment

The first numeral indicates protection of persons against access to dangerous parts and protection of internal equipment against the ingress of solid foreign objects.

The second numeral indicates protection of internal equipment against harmful ingress of water.

Note: The symbols shown in the above chart have been compiled for easy explanation only. They are not part of the IP code and must not be used instead of the IP code.The chart should be used in conjunction with the AS1939 Classification of Degrees of Protection provided by Enclosures for Electrical Equipment.

IP

15˚

30˚

1000mm min

150mm min

R1

LAMP BASES

A great variety of lamp bases is necessary to cope with the many different applications for the wide range of lamps, and a summary of lamp bases follows. The more common ES/BC bases are featured initially and then all other bases are listed in alpha/numerical order. The bases are denoted with the standard designation, so that it will be quite easy to find out with which base a certain lamp is equipped.

GENERAL EDISON SCREW BASES (ES)

REFERENCE SECTION

X Protection unspecified (untested) X Protection unspecified (untested)

O No special protection provided O No special protection provided

1Protection of hand against accidental access to dangerous parts, and protection of equipment against objects larger than 50mm*

1 Protection against drops of water falling vertically

2Protection of fingers against access to dangerous parts and protection of equipment against objects larger than 12mm*

2Protection against drops of water falling vertically when the object is tilted by up to 15° from its normal position (in any direction)

3 Protection against objects larger than 2.5mm* (e.g. tools, wires) 3 Protection against spraying water at up to 60°

from the vertical

4 Protection against objects larger than 1 mm* (e.g. fine tools, small wires) 4 Protection against splashing and spraying of

water from all practicable directions

5Protection against entry of dust in sufficient quantity to interfere with satisfactory operation of equipment

5 Protection against a low pressure jet of water from all practicable directions

6 Complete protection against entry of dust 6 Protection against heavy seas or a strong jet of water from all practicable directions

* This dimension applies to the smallest of the three mutually perpendicular dimensions of the object against which protection is provided.

“Flash” symbol indicates dangerous parts (live or moving)

7 Protection against immersion

8 Protection against submersion (tests subject to agreement, but no less severe than numeral 7)

The fact that electrical equipment is certified as being of a particular type of Explosion Protection does not mean that it automatically has a degree of protection against weather or environment. Therefore if equipment is to be used in an outdoor environment care should be taken to ensure that it has appropriate IP Rating, as shown in the table.

The second numeral indicates protection of internal equipment against harmful ingress of water.

LAMP BASES

A great variety of lamp bases is necessary to cope with the many different applications for the wide range of lamps, and a summary of lamp bases follows. The more common ES/BC bases are featured initially and then all other bases are listed in alpha/numerical order. The bases are denoted with the standard designation, so that it will be quite easy to find out with which base a certain lamp is equipped.

GENERAL EDISON SCREW BASES (ES)

MES CES SES ES ES ES GES GES

E10/13 E1212x15

E1425x17

E27/27 E27/30 E2751x39

E40/45 E4063x50

GENERAL BAYONET BASES (BC)

Ba15d Ba1524x17

B22/22 B2225x26

B2231x30

B2238x39

SBC SBC BC BC BC BC

R2


LAMP BASES

MISCELLANEOUS BASES IN ALPHABETICAL/NUMERICAL ORDER (not to scale)

B15d B15s B22 IIIB22d3

B22 s/22 B22 s/25x26

BA14d BA17s Bi22

BY22(52) BY22(68) E10/20x11CES

E12/20x15CES

E40 G2.5x728x15

G4

G5 G13 G6.35 G9.5 G22 G38

GU5.3 GX5.3 GX9.5 GY5.3 GY6.35 GY9.5

R3

LAMP BASES


SFC104

P40

REFERENCE SECTION


B15d B15s B22 IIIB22d3

B22 s/22 B22 s/25x26

BA14d BA17s Bi22

BY22(52) BY22(68) E10/20x11CES

E12/20x15CES

E40 G2.5x728x15

G4

G5 G13 G6.35 G9.5 G22 G38

LAMP BASES


GY16

PG12.2

GZ4

PG22d

GZ6.35

R7s

P28

SFa 21-12

P28s

SFC104

P40

SFc 15.5-6

R4


FOR CHOKE/STARTER OPERATION

FOR HF OPERATION

FLUORESCENT LAMP BASES ( IEC/EN 60061-1)

G24q- 1 G24q- 2 G24q- 3 GX24q-1 GX24q-2

2G8-1GX24q-3 GX24q- 4 GX24q-5 GX24q-6

R5

G23 G24d-1 G24d-2 G24d-3 GX24d-1 GX24d-2 GX24d-3

7,5 25 7,5


FOR HF OPERATION

BASES IEC/EN 60061-1

REFERENCE SECTION


FOR HF OPERATION


FOR HF OPERATION

BASES IEC/EN 60061-1


2G7 2G11 2G10

GR 8

8

GR10q

Fa6 G13 2G13

G5 G10q 2GX13 W 4,3 x 8,5d

R6


Class of Visual Task Minimum Illuminance on task (lux) Typical Examples

Casual seeing only 20, 50, 200To permit safe movement (e.g. in corridors with little traffic). Dead storage of rough bulky materials. Live storage fine materials requiring care.

Ordinary intermittent tasks or rough tasks 200 Rough intermittent bench work. Rough inspection and counting of stock parts. Assembly heavy machinery.

Moderately critical prolonged tasks 400 Medium bench and machine work. Assembly and inspection. General office work.

Severe prolonged task with small detail or poor contrast 800 Fine beach and machine work. Extra-fine painting, spraying,

sewing dark coloured goods, draftong work.

Very severe prolonged tasks with minute detail or very poor contrast 1600 Assembly and inspection of delicate machanisms. Tool and die

making. Fine grinding work.

Exceptionally difficult or important tasks 2400 Fine watchmaking and repairing.

Recommended Minimum LightingRecommended minimum service values of illumination for various classes of visual tasks as stated in Australian Standard AS 1680-1976

ELECTRICAL FORMULAS

LIGHTING AND FORMULA REFERENCE TABLES

To Find Single-Phase Alternating Current Two-Phase, Four-Wire Three-Phase Direct Current

Kilowatts 1 x E x pf1000

I x E x 2 x pf1000

I x E x 1.73 x pf 1000

I x E 1000

kVA I x E 1000

l x E x 21000

I x E x 1.73 1000 -

kW (Output) I x E x % EFF x pf I x E x 2 x % EFF x pf I x E x 1.73 x % EFF x pf I x E x % x EFF

Amperes when Horsepower is known

HP x 746 E x % EFF x pf

HP X 746 2 x E x % EFF x pf

HP X 746 1.73 x E x % EFF x pf

HP x 746Ex x % EFF

Amperes when Kilowatts is known

KW x 1000 E x pf

KWx1000 2 x E x pf

KWX1000 1.73 x E x pf

KW x 1000E

Amperes when KVA is known

KVA x 1000 E

KVA x 1000 2 x E

KVA x 1000 1.73 X E -

In three-wire, two-phase circuits the current in the common conductor is 1.41 times that in either other conductor

E = Volts I = Amperes % EFF = Per Cent Efficiency pf = Power FactorR7

Temperature

METRIC TO IMPERIAL CONVERSION TABLES

REFERENCE SECTION

Class of Visual Task Minimum Illuminance on task (lux) Typical Examples

Casual seeing only 20, 50, 200To permit safe movement (e.g. in corridors with little traffic). Dead storage of rough bulky materials. Live storage fine materials requiring care.

Ordinary intermittent tasks or rough tasks 200 Rough intermittent bench work. Rough inspection and counting of stock parts. Assembly heavy machinery.

Moderately critical prolonged tasks 400 Medium bench and machine work. Assembly and inspection. General office work.

Severe prolonged task with small detail or poor contrast 800 Fine beach and machine work. Extra-fine painting, spraying,

sewing dark coloured goods, draftong work.

Very severe prolonged tasks with minute detail or very poor contrast 1600 Assembly and inspection of delicate machanisms. Tool and die

making. Fine grinding work.

Exceptionally difficult or important tasks 2400 Fine watchmaking and repairing.

Recommended Minimum LightingRecommended minimum service values of illumination for various classes of visual tasks as stated in Australian Standard AS 1680-1976

To Find Single-Phase Alternating Current Two-Phase, Four-Wire Three-Phase Direct Current

Kilowatts 1 x E x pf1000

I x E x 2 x pf1000

I x E x 1.73 x pf 1000

I x E 1000

kVA I x E 1000

l x E x 21000

I x E x 1.73 1000 -

kW (Output) I x E x % EFF x pf I x E x 2 x % EFF x pf I x E x 1.73 x % EFF x pf I x E x % x EFF

Amperes when Horsepower is known

HP x 746 E x % EFF x pf

HP X 746 2 x E x % EFF x pf

HP X 746 1.73 x E x % EFF x pf

HP x 746Ex x % EFF

Amperes when Kilowatts is known

KW x 1000 E x pf

KWx1000 2 x E x pf

KWX1000 1.73 x E x pf

KW x 1000E

Amperes when KVA is known

KVA x 1000 E

KVA x 1000 2 x E

KVA x 1000 1.73 X E -

Kelvin = °C + 273.16 Celsius = 5/9 (F-32) Fahrenheit = 9C/5 + 32

Bar PSI kPA

1 bar= 14.5 psi 1 psi = 6.895 kPA 1 kPA= 7.5188 mm Hq

1 bar=100kPa 1 psi = 51.71 mm Hg 1 kPA= 0.2953 in. of mercury

1 bar = 750 mm Hq 1 psi = 2.036 in. of mercury 1 kPA = 0.01 bar

1 bar = 29.53 in. of mercury 1 psi = 0.069 bar 1 kPA = 0.145 psi

Pressure

Pressure Conversion Information

Conversion Table

To Convert Into Multiply By To Convert Into Multiply By To Convert Into Multiply By

Centimetres Inches .394 Kilograms Grams 1,000 Miles Feet 5.280

Feet .0328 Ounces 35.274 Yards 1.760

Metres .01 Pounds 2.205 Kilometres 1.609

Millimetres 10 Kilometres Feet 3281 Ounces Grams 28.35

Feet Centimetres 30.48 Metres 1000 Pounds .0625

Inches 12.00 Miles .621 Kilograms .028

Metres .3048 Yards 9144 Pints Litres 473

Miles .0001894 Litres Cups 4.226 Quarts .50

Yards .6777 Pints 2.113 Gallons .0125

Gallons Pints 8.0 Gallons .264 Pounds Grams 453.59

Litres 3.785 Millimetres 1000 Ounces 16.0

Quarts 4.0 Quarts 1.057 Kilograms .454

Grams Ounces .035 Metres Centimetres 100 Quarts Pints 2.0

Pounds .002 Feet 3.281 Litres .946

Kilograms .001 Inches 39.3 Gallons .25

Inches Centimetres 2.54 Kilometres .001 Yards Inches 36.00

Feet .0833 Miles .0006214 Feet 3.00

Metres .0254 Millimetres 1000 Metres .914

Yards .0278 Yards 1.093 Miles .0005682

Temperature

METRIC TO IMPERIAL CONVERSION TABLES

-18 -10 0 10 20 30

9080706050403220100

R8

REFERENCE SECTION

ARCHI ARCHITECTURAL

B/BATTN BARE BATTEN

CVD/BDY CURVED BODY

DIR/INDIR DIRECT/INDIRECT

F&P FLEX AND PLUG

N/BDY NARROW BODY

OPAL/DIFF OPAL DIFFUSER

P/BRD PLASTERBOARD

PERF REFL PERFORATED REFLECTOR

PRIS/DIFF PRISMATIC DIFFUSER

R/CES RECESSED

RECT/BDY RECTANGULAR BODY

S/MTG SURFACE MOUNTED

S/SPCLR SEMI SPECULAR

SPCLR SPECULAR

SQ/BDY SQUARE BODY

TRI/BDY TRIANGULAR BODY

TWIN/DIFF TWIN DIFFUSER

UNIV UNIVERSAL

W/G WIRE GUARD

W/WSHR WALL WASHER

WD/BDY WIDE BODY

Y5/DIFF Y5 DIFFUSER

ABBREVIATIONS

R9

ABBREVIATION DESCRIPTION

Date post:	28-Mar-2016
Category:	Documents
Upload:	chris-bright
View:	229 times
Download:	2 times

SLS Linear Fluorescent

Documents