61 Tel. (+31)(0)346 35 19 34 ▪ Fax. (+31)(0)346 35 47 41 ▪ www.beerepootagri.com ■ Driven by power take off or electric motor ■ Power of electric motors:11.0-30.0kW, capacity up to 450m 3 /hour ■ Pump pipe of choice: ø140mm or ø168mm ■ Guided grooves in the impeller house prevent that solid parts settle at the pump ■ Rotating and solid knives of tempered steel ■ Available to pit depths of 6.0m ■ Landia is a Danish quality product with 3 years of factory warranty Landia long-shafted slurry pump ARTICLE No. DESCRIPTION ■ Long-shafted slurry pump with power take off 540- 1000rpm 71-02109-502 Centrifugal pump ø140mm, power take off, 540rpm 71-02109-603 Centrifugal pump ø168mm, power take off, 1000rpm ■ Long-shafted slurry pump with electric motor, 1500rpm 71-02004-523 Centrif. pump ø140mm, elec. motor 11.0kW 71-02004-524 Centrif. pump ø140mm, elec. motor 15.0kW 71-02004-525 Centrif. pump ø140mm, elec. motor 18.5kW 71-02004-623 Centrif. pump ø168mm, elec. motor 18.5kW 71-02004-624 Centrif. pump ø168mm, elec. motor 22.0kW 71-02004-625 Centrif. pump ø168mm, elec. motor 30.0kW ■ There are many options for operation and installation in both galvanised or INOX versions. Ask your dealer about the possibilities or contact BeerepootAgri for advice. SLURRY PUMPS & MIXERS
■ Driven by power take off or electric motor■ Power of electric motors:11.0-30.0kW, capacity up to 450m3/hour■ Pump pipe of choice: ø140mm or ø168mm■ Guided grooves in the impeller house prevent that solid parts settle at the pump■ Rotating and solid knives of tempered steel■ Available to pit depths of 6.0m■ Landia is a Danish quality product with 3 years of factory warranty
Landia long-shafted slurry pump
ARTICLE No. DESCRIPTION
■ Long-shafted slurry pump with power take off 540- 1000rpm71-02109-502 Centrifugal pump ø140mm, power take off, 540rpm71-02109-603 Centrifugal pump ø168mm, power take off, 1000rpm
■ Long-shafted slurry pump with electric motor, 1500rpm71-02004-523 Centrif. pump ø140mm, elec. motor 11.0kW71-02004-524 Centrif. pump ø140mm, elec. motor 15.0kW71-02004-525 Centrif. pump ø140mm, elec. motor 18.5kW71-02004-623 Centrif. pump ø168mm, elec. motor 18.5kW71-02004-624 Centrif. pump ø168mm, elec. motor 22.0kW71-02004-625 Centrif. pump ø168mm, elec. motor 30.0kW
■ There are many options for operation and installation in both galvanised or INOX versions. Ask your dealer about the possibilities or contact BeerepootAgri for advice.
■ Reliable Danish technique with many options and installation possibilities■ Efficient cutting system for cutting coarse particles■ Power of electric motors: 0.75-30.0kW■ Specially designed impeller for heavy manure■ Suitable for manure with sand■ Guided grooves in the impeller house prevent that solid parts settle at the pump■ Horizontal or vertical installation
■ There are many options for operation and installation in both galvanised or INOX versions. Ask your dealer about the possibilities or contact BeerepootAgri for advice.
Langakslet gyllepumpe
Landia gyllepumpe type TPG for traktor og type MPG for eldrift med 4“, 5“ eller 6“ pumperør og energimotorer fra 5,5 – 30,0 kW. En driftssikker, robust pumpe med høj kapacitet til pumpning af gylle og andre vanskeligt pumpbare medier.
• Støbt pumpehus og pumpehjul med maksimal virkningsgrad
• Varmforzinkede rør og beslag • Meget servicevenlig konstruktion • Leveres til for- og lagertanke indtil 6 m tankdybde • Traktordrift med vinkelgear.
Kan leveres med justerbar Knivsystem i hærdet Traktordrift med vinkelgear. bundblander. stål til findeling af Optimal ydelse: Ekstraudstyr kan leveres for halmen og snegl for 540 rpm. ved 4”/5” pumper montering i lagertank. ensartet fødning af og 1000 rpm. ved 6” pumper. pumpe sikrer tilstop- ningsfri pumpning.
Engineered to last
Submersible High Pressure Slurry Pump DG H Extremely versatile submersible high pressure slurry pump with motors ranging from 2.2 – 30 kW. The DG H Slurry Pump can handle slurry with a high concentration of solids and is designed for pumping these at pressures up to 5 bar and over distances of up to several kilometers. Abrasive liquids, such as slurry with sand, has led to the development of optional pump components in hardened cast iron which significantly increases the life time. We offer individual pump solutions with a choice of different types of installation equipment all of which are capable of working under frost-free conditions even at low temperatures.
• 10 motor sizes from 2.2 – 30 kW • 50, 65, or 80 mm pump discharge • Capacity up to approximately 220 m³/hour
Special features:
• Chopping knives are standard – prevents clogging of pump • Knife system available in two versions: standard or extended • Available with hardened pump components – for abrasive slurry • Close coupled, compact design
Engineered to last
Submersible High Pressure Slurry Pump DG H Extremely versatile submersible high pressure slurry pump with motors ranging from 2.2 – 30 kW. The DG H Slurry Pump can handle slurry with a high concentration of solids and is designed for pumping these at pressures up to 5 bar and over distances of up to several kilometers. Abrasive liquids, such as slurry with sand, has led to the development of optional pump components in hardened cast iron which significantly increases the life time. We offer individual pump solutions with a choice of different types of installation equipment all of which are capable of working under frost-free conditions even at low temperatures.
• 10 motor sizes from 2.2 – 30 kW • 50, 65, or 80 mm pump discharge • Capacity up to approximately 220 m³/hour
Special features:
• Chopping knives are standard – prevents clogging of pump • Knife system available in two versions: standard or extended • Available with hardened pump components – for abrasive slurry • Close coupled, compact design
■ MPTK pumps are designed for pumping sludge and other difficult pumpable fluids with high dry matter content■ Very suitable (in combination with a submersible pump) for pumping over long distances■ Horizontal or vertical installation ■ Guided grooves in the impeller house prevent that solid parts settle at the pump■ Pump casing and impeller made of high quality cast iron■ Power of electric motors from 5.5kW to 30.0kW■ Deliverable with knife system
ARTICLE No. DESCRIPTION
■ Dry installed motor pumps, 1500rpm71-02504-805 Motor pump MPTK 80, 5.5kW71-02504-907 Motor pump MPTK 105, 7.5kW71-02504-915 Motor pump MPTK 105, 15.0kW71-02504-918 Motor pump MPTK 105, 18.5kW71-02504-618 Motor pump MPTK 150, 18.5kW71-02504-622 Motor pump MPTK 150, 22.0kW71-02504-630 Motor pump MPTK 150, 30.0kW
■ Dry installed motor pumps, 3000rpm71-02502-707 Motor pump MPTK 65H, 7.5kW71-02502-715 Motor pump MPTK 65H, 15.0kW71-02502-718 Motor pump MPTK 65H, 18.5kW71-02302-815 Motor pump MPTK 80H, 15.0kW71-02302-818 Motor pump MPTK 80H, 18.5kW71-02302-822 Motor pump MPTK 80H, 22.0kW71-02302-830 Motor pump MPTK 80H, 30.0kW
■ There are many options for operation and installa- tion in both galvanised or INOX versions. Ask your dealer about the possibilities or contact BeerepootAgri for advice.
Landia AXP recirculation pump for slurry circulation systems
■ There are many options for operation and installa- tion in both galvanised or INOX versions. Ask your dealer about the possibilities or contact BeerepootAgri for advice.
The POP Landia mixers are very versatile for use in nearly all types of manure silos and lagunes. The unique 3-blade propeller design offers outstanding mixing performance - even in thick/heavy slurry as in slurry containing straw.The installation-kit can be supplied in galvanised and INOX versions.
■ Complete line of submersible mixers with electric motors from 3.0-30.0kW■ AC motors, 50Hz, 400V (3-phase) with gear motor■ Diameter of the propeller is related to the material to be mixed
Control panel with timer for manure pumps and mixers
6.8 8.810.515.021.528.535.038.552.0
150015001500150015001500150015001500
9001.2001.6502.2503.3004.5005.5506.6009.000
95 99112152194235242285300
POWER MOTOR ARTICLE No. DESCRIPTION
73-01104-303 Submersible mixer POP 3.0kW 73-01104-304 Submersible mixer POP 4.0kW 73-01104-305 Submersible mixer POP 5.5kW 73-01104-307 Submersible mixer POP 7.5kW 73-01104-311 Submersible mixer POP 11.0kW 73-01104-315 Submersible mixer POP 15.0kW 73-01104-318 Submersible mixer POP 18.5kW 73-01152-322 Submersible mixer POP 22.0kW 73-01152-330 Submersible mixer POP 30.0kW
■ There are many options for operation and installation in both galvanised or INOX versions. Ask your dealer about the possibilities or contact BeerepootAgri for advice.
CONSUMP. in Ampère
300300300300300300300490490
MOTOR RPM
PROPELLER RPM
MIX CAPACITYin m3/hour (app)
WEIGHT in kg
ARTICLE No. DESCRIPTION
76-80510-011 Control panel with soft-start up to 11.0kW76-80510-015 Control panel with soft-start up to 15.0kW76-80510-018 Control panel with soft-start up to 18.5kW76-80510-022 Control panel with soft-start up to 22.0kW76-80510-030 Control panel with soft-start up to 30.0kW
■ To a dairy farm with 1500 pieces of dairy cattle in Hungary BeerepootAgri had delivered all the manure pumps and mixers.
All types of mixers are equipped with the special liquid manure-proof mud bearings, which gives the mixers a long service life. The special mixing cylinder round the wing ensures highly effective intake of the manure. All mixers are hot dipped galvanised.Super-Gigant and Mammoet can be equipped with a reversing unit, so that they suitable for 2 directions, suction and pressure.
ARTICLE No. DESCRIPTION
74-80800-400 Super-Gigant 400 tube length=400cm (total 431cm) with 3-bladed wing Ø 50 cm, bottom piece 54cm.sq., including mixer support for fixed installation, exclu- ding power take off shaft Capacity approximately 2,130 m³/hour74-80800-500 Super-Gigant 500 tube length=500cm (total 531cm) further provided as Super-Gigant 40074-80800-600 Super-Gigant 600 tube length=600cm (total 631cm) further provided as Super-Gigant 400
74-80900-400 Mammoet 400 tube length=400cm (total 431cm) with 3-bladed wing Ø 60 cm, bottom piece 70cm.sq., including mixer support for fixed installation, exclu- ding power take off shaft Capacity approximately 3,350 m³/hour74-80900-500 Mammoet 500 tube length=500cm (total 531cm) further provided as Mammoet 40074-80900-600 Mammoet 600 tube length=600cm (total 631cm) further provided as Mammoet 400
73-80900-400 Mammoet electric mixer, tube length=400cm, with 3-bladed wing Ø 60cm, bottom piece 70cm.sq., with build-on 18kW electric motor and gear box, in- cluding star-delta, turning switch for two directions, excluding cable. Capacity approximately 3,350 m³/hour.
■ Other sizes on request
Guiding & mixer frames
ARTICLE No. DESCRIPTION
76-80731-500 Guiding frame 500 cm for mixer frame 54cm.sq.76-80732-500 Guiding frame 500 cm for mixer frame 70cm.sq.76-80732-600 Guiding frame 600 cm for mixer frame 70cm.sq.75-80721-054 Mixer frame 54cm.sq., for wall thickness 28 cm75-80721-070 Mixer frame 70cm.sq., for wall thickness 28 cm
■ Tractor driven mixers
■ Mammoet-electro mixer
■ 3-bladed wing
■ Optional:76-81100-000 3 point frame for tractor-hitch driven mixer76-81200-000 3 point frame (tilting) for tractor driven mixer76-81300-000 Reversing unit for Super-Gigant en Mammoet
