SM
A CyberOptics Corporation Brand
3D Measurement Services for Inspection & Reverse Engineering
3D Scanning is a non-contact technology that measures
fine details & captures complex geometries to generate a highly accurate 3D model.
ITAR REGISTERED AND CERTIFIED
Laser Design is committed to investing in secure resources to ensure all ITAR data is stored in a manner that meets or exceeds ITAR requirements. Your ITAR project is not only compliant but fulfilled by a registered and certified company.
Big or Small, Inside or Out,Laser Design Can Measure It for You
3D Laser Scanning – Over 30 Years and 25,000 Successful Projects Completed!
3D scanning, the process of converting physical objects into precise digital models, enables you to quickly and accurately capture your project’s shape and geometries. This process supplies you with a complete digital representation of your part to be used for reverse engineering, quality inspection or at any point of a typical manufacturing cycle. 3D laser scanning technology can provide you with:
• Fast, ultra-accurate results, reducing your time to market (saving you time and money!)• Complete measurement data of the entire surface of your object, verifying that the
as-built part matches your CAD model• True CAD models for FEA testing of actual geometry to correct problems before parts
go into production• CAD models to validate tooling, even when no current models exist• Profile data of the whole part so assemblies can be digitally put together, revealing
inaccuracies and interference
With over 30 years of successful 3D scanning projects, Laser Design can scan anything from tiny components to vehicles and even entire buildings. Whether the project is performed in our lab or at your site, our expert metrologists and experienced engineers will make it happen – on your schedule.
SERVICESSince 1981, Laser Design has been committed to providing our
customers with the right 3D solutions for their 3D needs through our service bureau division.
3D Scanning for Parts & Objects
Architecture, Engineering & Construction (AEC) Scanning
Industrial CT Scanning
Aircraft, Vehicles & Large Objects Scanning
ITAR - Weapons Scanning
On-Site Scanning
Reverse Engineering
Metrology & Inspection
Point Cloud Modeling
Scanner Equipment Rentals
3D Scanning – Parts and Objects
Supplies you with a complete digital representation of your part to be used for reverse engineering, quality inspection or at any point of a typical manufacturing cycle.
More Information >>
Architecture, Engineering & Construction Scanning (AEC)
Terrestrial & Mobile 3D scanning are techniques for collecting high-density spatial imaging with millions of coordinates quickly and accurately. The point cloud data can also be surfaced to generate a CAD model which can be used for comparison or reconstruction.
More Information >>
CT Scanning
Metrology-grade Computed Tomography (CT) inspection is non-destructive and allows a complete 3D capture of complex internal geometry of parts without needing visual access.
More Information >>
Learn More About All of Our Services - More Information >>
Design & Reverse Engineering
Let us model your scan data to CAD format. Everything from tiny parts to entire scenes. 3D renderings from 2D images, surface-model or solid-model based, models used in computer simulations (for FEA), & 3D printing devices.
More Information >>
Inspection & Metrology
Laser Design’s experienced metrologists use the latest digitizing and software technologies available for both contact and non-con-tact measurement to perform dimensional inspection. GD&T, First Article, Process Capability, and Touch Probe measurements.
More Information >>
SYSTEMSLaser Design also carries a number of 3D Scanning Inspection
System Solutions for a wide variety of applications that have helped customers successfully complete their most complex inspection,
analysis, and reverse engineering projects.
CyberOptics Industrial Metrology Systems• SQ3000™ CMM and CyberGage®360
• Surveyor® XLP Laser Scanners• CT Scaning Systems by RX Solutions
Artec3D Portable Scanners
CyberOptics Industrial Metrology Systems
Lowering Cost of Quality and Speeding up time to market, CyberOptics’ high-precision 3D scanning inspection systems with metrology-grade accuracy have helped customers successfully complete their most complex inspection, analysis, and reverse engineering projects.
The CyberOptics Industrial Metrology Systems portfolio includes systems Powered by MRS Technology (SQ3000 CMM and CyberGage360), Laser Scanning Systems, and Computed Tomography (CT) Scanning Systems.
More Information >>
Learn More About All of Our Systems - More Information >>
Artec3D Portable Scanners
Artec hand-held 3D scanners are perfect for those needing quick, textured and accurate scans. Capturing objects quickly in high resolution and vibrant color, which allows for almost unlimited applications. Artec 3D Scanners are ideal for schools, anthropology, automotive, aerospace, quality control, heritage preservation, archaeology, computer graphic design and more!
More Information >>
SM
A CyberOptics Corporation Brand
Laser Design, a CyberOptics Corporation Brand, is the premier provider of 3D Scanning and Measurement Services helping customers successfully complete their most complex inspection, analysis, and reverse engineering projects for over 30 years.
Our experienced metrologists and engineers know that today, more than ever, speed and quality give manufacturers the competitive advantage.
5900 Golden Hills Drive, Minneapolis, Minnesota 55416
LaserDesign.com
952.884.9648
Copyright © 2019. CyberOptics Corporation. All rights reserved. Specifications subject to change without notice 8027583 Rev A