7/25/2019 SM_30_4043_A2_en_Image Recovery - PartitionRecovery.pdf

1/13

VISUCAMlite

Fundus Camera

Image Recovery Partition C Recovery

Recovery CDVISUCAM

liteR 1.02

S/N 1242-737

Service Instructions

SM-30-4043-A2-en

Issue: 08.07.2003

Replaces issue: page 1 of 13

Service

Service

Service

Service

MS - TS 1

7/25/2019 SM_30_4043_A2_en_Image Recovery - PartitionRecovery.pdf

2/13

Service instructions Issue: 08.07.2003

SM-30-4043-A2-en Replaces issue: - Page 2 of 13

ContentsPage

Contents .................................................................................................................... 2

Update information................................................................................................... 3

General information.................................................................................................. 4

Image restore Partition restore............................................................................. 5

Overview........................................................................................................................... 5

Transferring an image from CD onto the hard disk....................................................... 5

Erasing the hard disk...................................................................................................... 5

Transferring the new image............................................................................................ 6

Setup English language.................................................................................................. 9

Selective partition transfer from image CD to the hard disk ...................................... 10

Setup English language................................................................................................ 13

7/25/2019 SM_30_4043_A2_en_Image Recovery - PartitionRecovery.pdf

3/13

Service instructions Issue: 08.07.2003

SM-30-4043-A2-en Replaces issue: - Page 3 of 13

Update information

Issue Remarks

08.07.2003 Issue 1

7/25/2019 SM_30_4043_A2_en_Image Recovery - PartitionRecovery.pdf

4/13

Service instructions Issue: 08.07.2003

SM-30-4043-A2-en Replaces issue: - Page 4 of 13

General information

Use the User Manual, SAP No.: 1165-216, as additional literature on the VISUCAMlite

funduscamera. You must be familiar with the contents of the user manual to be able to work with theservice instructions.

The replacement modules have been chosen in such a way that replacing them should bepossible without a special training. If in-depth work on the unit is necessary, you should attendthe appropriate service training.

No fastening components are allocated to and supplied with the spare parts. For this reason,the fastening components provided in the unit must be re-used when modules are replaced.

7/25/2019 SM_30_4043_A2_en_Image Recovery - PartitionRecovery.pdf

5/13

Service instructions Issue: 08.07.2003

SM-30-4043-A2-en Replaces issue: - Page 5 of 13

Image recover Partition C recover

Overview

- Image (conplete content of hard disk) recover:

If there is a hard disk installed new in the VISUCAMlite

or a completely down OS (Operating

System) the OS including the VISUCAMlite

program and Database must be transfered ontothe hard disk (Image recover). Is there a used hard disk the partitions have to be erasedbeforehand. If the complete Image is transfered, the complete content of the Hard disk includ thedatabase (patient datas and pictures) will be erased.

- Partition C recover:In case of e.g. crashed OS or an OS Update is necessary only a partition C transfer shouldbe done to the hard disk.Partition C recovery keeps the database (patient datas and pictures) saved on the harddisk.

Note: during this procedure, it is not possible to use the mouse. Buttons can be activated

using the keys or the tabulator key. The Enter key activates or concludes afunction or procedure.

Restoring a complete image from CD-ROM onto the hard disk

Erasing the hard disk

VISUCAM

liteis on.

Insert VISUCAMlite

image CD-ROM intothe CD-ROM drive.

Switch off VISUCAMlite

.

Switch off external CD writer.

Switch on VISUCAM

lite.

VISUCAM liteis booted fromthe CD-ROM and displays the screenshown after some time.

Use the key to perform.

A Pop Up window opens.

Local is highlighted. Use the , key to

highlight Quit.

Use the key to perform.

You are asked for Quit

Use the or tabulator key to highlight

Yes.

Use the key to perform and change toDOS level.

7/25/2019 SM_30_4043_A2_en_Image Recovery - PartitionRecovery.pdf

6/13

Service instructions Issue: 08.07.2003

SM-30-4043-A2-en Replaces issue: - Page 6 of 13

DOS level deleting the partitions

Type in cd..

Type in gdisk 1 /del /all

The partitions of the hard drive aredeleted.

Note::German Keyboard!

Key = /

Type in cd ghost

Type in ghostpe

Transferring the new image

The Ghost start up window is displayed

on the screen.

Due to the need of the License

Number later on - write it down

Use the key to perform.

A Pop Up window opens.

Local is highlighted or use the , key tohighlight.

Use the or key to open the nextPop Up window.

7/25/2019 SM_30_4043_A2_en_Image Recovery - PartitionRecovery.pdf

7/13

Service instructions Issue: 08.07.2003

SM-30-4043-A2-en Replaces issue: - Page 7 of 13

Disk is highlighted.

Use the or key to open the nextPop Up window.

Use the key to highlight From Image.

Use the key to perform.

A selection window opens.

Use the Tab key to select the input drive(short way: 1 x Shiftand Tab).

The drive window frame is highlighted.

Use the key to open the drive window.

The drive window is opened.

Use the

key to highlight d:the CD-ROMdrive.

Use the key to perform.

The contents of d:is displayed.

Ghostimage:

VCRXXXC.GHO

Ghost imageImage of drive

Version (e.g. 102)

VISUCAM Release

Use the key to set file name

Use the Tab key to select Open Use the key to perform.

7/25/2019 SM_30_4043_A2_en_Image Recovery - PartitionRecovery.pdf

8/13

Service instructions Issue: 08.07.2003

SM-30-4043-A2-en Replaces issue: - Page 8 of 13

The Ghost license input window opens.

Input the license number

Use the Tab key to select OK

Use the

key to perform.

The local destination drive is displayed.

Use the Tab key to select OK

Use the key to perform.

The details for the destination drive aredisplayed.

Note:For hard disks with different capacities youcan make changes here.

Use the Tabkey to select OK.

Use the key to perform.

Question for start loading Use the Tabkey to selectYes.

Use the key to perform.

The image is then transferred from theCD-ROM to the hard disk.The bar indicates the progress of the

transfer.

Transfer is finished.

Use the Tabkey to select Continue

Use the key to perform.

7/25/2019 SM_30_4043_A2_en_Image Recovery - PartitionRecovery.pdf

9/13

Service instructions Issue: 08.07.2003

SM-30-4043-A2-en Replaces issue: - Page 9 of 13

A selection window opens

Use the keyto selectQuit.

Use thekey to perform.

A selection window opens to finishGhost

Use the Tab keyto selectYes.

Use thekey to perform.

DOS windows displays

A:\Ghost>

Remove the CD ROM and close the drive.

Switch off the VISUCAM

lite.

Switch on the VISUCAMlite

VISUCAMlite

starts up with German language

Setup English language

Click button Einstellungen

A window Einstellungenopens

Click menu Benutzeroberflche

A menu for user settings opens

Click English for English language.

Restart VISUCAM

liteto perform the new

language setting.

Check all the functions of the VISUCAMlite

and also check all special extra settings:

Finder camera position Printer drivers

Network settings

7/25/2019 SM_30_4043_A2_en_Image Recovery - PartitionRecovery.pdf

10/13

Service instructions Issue: 08.07.2003

SM-30-4043-A2-en Replaces issue: - Page10 of 13

Recover only partition C from image CD to the hard disk

VISUCAM

liteis on.

Insert VISUCAMlite

image CD-ROM intothe CD-ROM drive.

Switch off VISUCAM lite.

Switch off external CD writer.

Switch on VISUCAMlite

.

VISUCAMlite

is booted fromthe CD-ROM and displays the screenshown after some time.

Use the key to perform.

A Pop Up window opens.

Local is highlighted or use the , key tohighlight.

Use the or key to open the next

Pop Up window.

Use the key to highlight Partition.

Use the or key to open the nextPop Up window.

Use the key to highlight From Image.

Use the key to perform.

a selection window opens.

Use the Tab key to select the input drive.

(short way: 1 x Shiftand Tab)

the drive window frame is highlighted

Use the key to open the drive window.

7/25/2019 SM_30_4043_A2_en_Image Recovery - PartitionRecovery.pdf

11/13

Service instructions Issue: 08.07.2003

SM-30-4043-A2-en Replaces issue: - Page11 of 13

The drive window is opened.

Use the key to highlight d:the CD-ROMdrive

Use the key to perform.

The contents of d:is displayed

Ghostimage:

VCRXXXC.GHO

Ghost imageDrive image

Version (e.g. 102)

VISUCAM Release

Use the key to perform.

The Ghost license input window opens.

Input the license number

Use the key to perform.

The source partitions of the image CDare displayed.

Use the key to select the desired sourcepartition.

Use the key to perform.

The local destination drive is displayed

Use the key to perform.

7/25/2019 SM_30_4043_A2_en_Image Recovery - PartitionRecovery.pdf

12/13

Service instructions Issue: 08.07.2003

SM-30-4043-A2-en Replaces issue: - Page12 of 13

The destination partitions are displayed

Use the key to select the desireddestination partition.

Use the key to perform.

Question for start loading

Use the Tabkey to selectYes.

Use the key to perform.

The partition is then transferred from theCD-ROM to the hard disk.The bar indicates the progress of thetransfer.

Transfer is finished.

Use the Tabkey to select Continue

Use the key to perform.

A selection window opens

Use the keyto selectQuit.

Use thekey to perform.

7/25/2019 SM_30_4043_A2_en_Image Recovery - PartitionRecovery.pdf

13/13

Service instructions Issue: 08.07.2003

A selection window opens to finishGhost

Use the Tab keyto selectYes.

Use thekey to perform.

DOS windows displays

A:\Ghost

Remove the CD ROM and close the drive.

Switch off the VISUCAMlite

.

Switch on the VISUCAM

lite

VISUCAMlite

starts up with German language

Setup English language

Click button Einstellungen

A window Einstellungenopens

Click menu Benutzeroberflche

A menu for user settings opens

Click English for English language.

Restart VISUCAM

liteto perform the new

language setting.

Check all the functions of the VISUCAMlite

and also check all special extra settings:

Finder camera position

Printer drivers

Network settings