Shot Blasting Technology
www.rosler.com
2
finding a better way ...When it comes to dealing with surface finishing and surface preparation problems,Rösler offers the total process solution! Our customers can choose between twoprocessing technologies, Vibratory finishing or Shot blasting, which offer virtuallyunlimited possibilities. Through extensive processing trials, we always find the rightfinishing solution for our customer’s needs.This includes not only the development of aspecific finishing process, but also the selection of the right equipment and consumables.We deliver the total solution to satisfy your surface finishing requirements. Oursuccess in the market proves that we are right. It is not by chance that our innovativedevelopments and our high quality standards have established Rösler as the worldtechnology and market leader in vibratory finishing and shot blasting.
In more than 60 countries we support our customers with a closely-knitnetwork of Rösler subsidiaries and sales representatives.
We are the only company in our field operating test and demonstration centresthroughout the world. This allows us to run test trials under real production conditionsclose to our customers. This offers several advantages: Our customers save time and money, and at the same time – through our professional processing trials and advice – they are assured of receiving the best process solutions and products available on the market!
CERTIFICATE
The Certification Body of TÜV SÜD Management Service GmbH
certifies that
Rösler Oberflächentechnik GmbH Vorstadt 1, 96190 Untermerzbach, Germany Hausen 1, 96231 Bad Staffelstein, Germany
has established and applies a Quality Management System for
Untermerzbach: Development, production and sale of
machines, installations and consumables for the vibratory and shot-blasting technology
Bad Staffelstein: Development and production of
consumables for the vibratory technology
An audit was performed, Report No. 70010098 Proof has been furnished that the requirements
according to
ISO 9001:2008
are fulfilled. The certificate is valid from 2013-12-03 until 2016-12-02. Certificate Registration No. 12 100 10167 TMS
Product Compliance Management
Munich, 2013-12-02
Rösler is a dynamic organizationwhere the initiative andcommitment of each employeeplays a key role. Systematictraining and a cooperativemanagement with lean structuresare essential elements ofour corporate philosophy. Thisallows us to create a workplaceenvironment which attractstalented young people.
TeamSpirit
The consideration of environmentalissues guarantees a high level of product quality and environmental protection. For example, recycling the process water is a key featureof our mass finishing technology.In this case, the positive effect on the environment is reflected in savings of compound and water of up to 95%. At the same time, a highlevel of process reproducibilityand finishing quality is guaranteed.
Environmental ·Quality
Vibratory finishing andshotblasting test centre locatedat the Rösler headquartersin Untermerzbach: • more than 95 vibratory
finishing and shotblasting systems
• working space: approx. 2.700 square meters
Similar test centres are located inthe United States, Great Britain,France, the Netherlands,Belgium, Switzerland, Russia, Spain, Italy, Austria, South Africaand Brazil.
Worldwide Demonstrationand Test Centres
Consumables, machinesandprocess safety in perfectcombination: • A perfect interaction between
consumables, equipment, process and safety
• Cost-saving automation linking multiple process steps
• Qualified field service teams guarantee smooth installation and commissioning of your equipment
• Comprehensive training of your operators and maintenance staff
• After-sales service guarantees high uptimes for your equipment
The Total ProcessSolution
3
ISO 9001
5
Hydraulic- pneumatic components
Implantand medical instruments
Aerospace components
MachinecomponentsBearing componentsSteel- and ship buildingJewellery/watch parts
Automotive parts
Hand toolsGas-, air-, plumbing fittings
Shot blasting is a technology which directsblastmedia onto a parts surface at a speed ofup to 170 m/sec. The media is accelerated eitherby turbines (airless), compressed air, or electricpumps (water jet cleaning). The blast resultsdepend on the type of blast machine, processingparameters and selected blast media.
Turbine components
Audio, video,photo components
Electronic componentsConcrete,
stone and ceramic industry
Gearbox components
Cutlery and knife parts
Furniture and hardware
Descaling, Rust Removal
Paint Stripping, Coating Removal
Core Removal, Sand Removal
Shot Peening
Surface Cleaning
Deburring
High-pressure Water Jet Blasting, Satin Finish Wet Blasting
Painting, Rust Protection
Surface Finishing
Roughening
Computer parts
4
4
4
4
4
4
4
4
4
4
4
4
With the development of this continuousthrough feed tumble belt system, Rösler hasopened up the way to fully automatic and economi-cal shot blasting of mass produced smallto mid-size bulk parts, as well as the blastcleaning of large, delicate components.All in the same machine.
RMBD – Continuous ThroughFeed Tumble Belt Machines
Our comprehensive product range offers modern shot blasting technologieswhich completely fulfill today’s market requirements. In addition, we are constantlyworking with our customers to develop individual solutions to specific surfacetreatment problems.
Shot Blasting
This machine type is ideal for continuous,all-around shot blasting of flat, as well aslarge parts with complex geometry. Partsare transported through the blast machineon a highly wear-resistant wire mesh belt.Available with 2, 4 or 8 turbines.
RDGE – Wire Mesh Belt Machines
76
RMBD 500/2 (4)
Date:
10/
12
500
Hurricane® 28, 32, 42
2 or 4
5,5 – 11
yes
5.340
5.200
Max. part size (measured diagonally in mm)
Tumble belt diameter (mm)
Type of turbines
Number of turbines
Power of turbines (kW)
Integrated separation
Machine length (mm)
Machine height (mm)
Technical data:Technical data: RDGE 800-2 (4,8) RDGE 1000-4 (8) RDGE 1250-4 (8) RDGE 1600-4 (8)
Date:
02/
14
Hurricane® 28, 32, 42
2, 4 or 8
5,5 – 15 5,5 – 15 5,5 – 15 5,5 – 15
100 100 100 100
800 1.000 1.250 1.600
400 400 500 600
1.000 1.000 1.200 1.300
7.000 7.000 7.000 8.000
5.300 5.300 5.300 5.600
Type of turbines
Number of turbines
Power of turbines (kW)
Max. parts weight (kg/running meter)
Max. pass width (mm)
Max. pass height (mm)
Loading height (mm)1
Machine length (mm)
Machine height (mm)
1 Measured from floor level
400
98
RRB – Roller Conveyor Machines RHB – Overhead Rail Hanger Machines
Date:
02/
14
Version* RHBE 11/15 RHBE 13/18 RHBE 17/22 RHBE 22/27 RHBE 22/32
Max. gate width/part diameter (mm) LHD
1.100 1.300 1.700 2.200–
2.200
Max. gate height/part height (mm) LHD
1.500 1.800 2.200 2.700–
3.200
Max. hook weight (kg) L HD
500 500 2
500 2 1.000 2
1.000 1.000 2
1.000 1.000 2
– 2.000 2
Number of turbines and power (kW) L HD
2 x 5,5 2 x 5,5
2 x 7,5 3 x 7,5
3 x 7,5 3 x 11
4 x 7,5 4 x 11
– 5 x 11
Machine length total (mm) L
HD5.000 4.500
5.400 5.000
5.900 6.000
6.550 6.590
– 6.590
Machine width total (mm) L HD
3.800 3.800
4.350 4.350
5.500 5.800
6.065 7.000
– 7.000
Machine height total (mm) L HD
4.750 4.750
5.250 5.275
5.600 5.700
6.625 7.100
– 7.600
Foundry design type „F“ HD x x x x
Continuous design type „RHBD…T” HD x x x x x
Date:
04/
14
1 Special dimensions on request.2 Pullout device for turbines available (optional).* L - Standard Version / HD Heavy-Duty
RRB 11/5
RRB 16/5
RRB 22/5 L*
RRB 22/5 HD*
RRB 27/6 L*
RRB 27/6 HD*
RRB 34/6 L*
RRB 34/6 HD*
RRB 42/6 L*
RRB 42/6 HD*
RRB 52/6 HD*
Max. component width/height (mm) 1.000 x 500 1.500 x 500 2.000 x 500 2.000 x 500 2.500 x 600 2.500 x 600 3.200 x 600 3.200 x 600 4.000 x 600 4.000 x 600 5.000 x 600
Maximum load (kg/m) 1.250 1.250 1.200 1.500 1.200 2.000 1.200 2.000 2.000 2.000 2.000
Blasting efficiency at rust levelB/SA 2 ½:sheets up to (m/min)profiles up to (m/min)
21,5
21,5
32
64
32
64
32
64
32
64
64
4 x H327,5
11
4 x H4211
15
6 x H4211
15
6 x H4222 30
6 x H4211
15
6 x H4222 30
6 x H4215
8 x H4222
30 /37
8 x H4222
10 x H4230
37
14 x H4230
37
6.450 6.450 6.750 6.750 7.050 7.050 7.050 7.050 7.050 7.050 7.050
Machine width (mm) 2.900 3.450 3.800 3.800 4.800 4.800 5.500 5.500 7.100 7.100 8.200
Machine height (mm) 4.950 5.300 6.100 6.100 6.400 6.900 6.400 6.900 7.000 7.000 7.000
Technical Data: 1
1 Special dimensions on request.2 Expandable* L - Standard Version / HD Heavy-Duty
Overhead rail hanger shot-blast machines are recommended for pro-cessing delicate parts which cannot be processed in bulk, and for par-ticularly complex, heavy, and/or large volume components. Rösler offers3 different types of overhead rail hanger shot blast machines, namelylinear single rail or Y-rail batch systems and continuous overhead railsystems. The linear single rail systems are available in the versions „L“(standard design), „HD“ (high performance design) and „F“ (foundrydesign). The continuous overhead rail systems are supplied in „HD“or „F“ design, each available as indexing or continuous version.
Rösler roller conveyor machines are specifically designed for blastcleaning very long and flat parts, such as large area metal sheets andI-beams. They are also ideal for shot blasting low profile weldments.The components pass through the machine (usually a entrance vestibule,a blasting chamber and a blow off/brush-off chamber) on a specialforced drive roller conveyor system. The travel speed is variable.Rösler offers turnkey preservation lines for spraying a welding primeror a total surface coating on the blasted components. Regardless ofthe condition of your raw materials, they can be pretreated, derustedand coated with a high gloss paint, all in a single process.
Technical Data: 1
6 x RuttenƳ 400
6 x RuttenƳ 400
8 x RuttenƳ 400
Machine length (mm)with blow/brush-off
Number of turbines²Power in kW (Standard)
Power (kW)-option
Rutten turbines (option) 10 x RuttenƳ 400
12 x RuttenƳ 400
4 x RuttenƳ 400
4 x RuttenƳ 330
10
This machine type is ideal for batch processingof mass produced parts of all kinds of bulk parts.The RMBC offers a wide range of shot blastingapplications: From small, delicate plastic componentsup to large, heavy forgings. Availablewith either rubber belt or steel slattedtumbling mill.
RMBC – Tumble Belt Batch Machines
11
SBM/SBI blast machines are equipped with aVshaped troughed belt. The transport cams on thebelt have an auger effect and induce a gentleforward movement of the components through theblast area. This machine type is especially suitablefor continuous shot blasting of high volumes ofsmall bulk parts. SBM/SBI machines can beequipped with turbines or air injectionor pressure blast systems.
SBM/SBI – Continuous Loop BeltConveyor Through Feed Machines
SBM 1010 SBM 1210 SBM 1520 SBM 2020
Max. part size (measured diagonally in mm)
Type of turbines
Number of turbines
Power of turbines (kW)
Capacity 1 (kg/h)
Integrated separation
Machine length (mm)
Machine height (mm)
Technical Data: 100 190 190 265
Hurricane® 28, 32, 42
1 1 2 2
5,5 7,5 each 7,5 each 11
650 1.000 2.000 2.500
– x x x
2.720 3.940 4.660 5.360
3.400 4.500 5.400 5.400
Date:
02/
14
1 In reference to steel parts
1 Higher payloads possible (option)2 At loading „standard system RBV“³ At gentle loading (max. 300 mm drop height) „vibratory conveyor“4 Also steel plate available* L - Standard Version/ HD Heavy-Duty
Date:
04/
14
RMBC 1.1 L*
RMBC 1.1 HD*
RMBC 2.1 L*
RMBC 2.1 HD*
RMBC 4.1 HD*
RMBC 4.2 HD*
RMBC 6.2 HD*
RMBC 8.2 HD*
RMBC 10.3 HD*
Max. batch volume (dm³) 90 90 160 160 370 370 600 800 1.000
Max. batch weight (kg)1 300 400 400 700 1.000 1.000 1.500 2.800 3.000
Max. component weight (kg) 10 15 10 15 20 20 40 ²/150 ³ 50 ² / 250 ³ 50 ²/ 200 ³
Number of turbines and power(up to kW)
to 1 x 7,5 to 1 x 7,5 to 1 x 11 to 1 x 15 to 1 x 30 to 2 x 15 to 2 x 22 to 2 x 37 to 3 x 30
Tumble belt rubber plate rubber plate rubber plate rubber plate4
rubber plate rubber plate4
steel plate steel plate steel plate
Blast chamber width (mm) 700 700 900 900 1.350 1.350 1.200 1.700 2.255
Machine height (mm) 3.875 4.005 4.205 4.150 5.400 5.400 6.400 7.100 8.200
- - - x - x x x x
Technical Data:
Foundry design type „F”
1312
Components are placed on the rotary table whichpasses them continuously through the blast area.This guarantees uniform blasting of the parts‘ surface.RDT systems are available with a single rotary tableor a segmented indexing table. RDT machines can beequipped with turbines or air injection or pressure blastsystems. Table diameters from 1,000 to 2,500 mm.
RDT – Rotary Table Machine
Date:
02/
14
RDT 100 RDT 150 RDT 200 RDT 250
Rotary table diameter (mm)
Max. parts height (mm)
Max. load (kg)
Number of turbines and power (kW)
Machine width (mm)
Machine length (mm)
Machine height (mm)
1.000 1.500 2.000 2.500
470 600 800 800
300 1.000 1.000 1.500
1 x 5,5 1 x 7,5 2 x 7,5 3 x 7,5
1.100 1.660 2.600 3.000
2.250 2.280 2.300 3.000
3.400 4.500 5.400 5.400
Technical Data:
With the rotary indexing satellite table machine, delicate partscan be processed on a continuous basis without touching eachother. The spectrum of blasting applications for these machinesranges from delicate deburring to shot peening. RSA machinesare also used for applications in which only certain areas of theparts need to be blasted. RSA machines can be equipped withturbines or pressure air systems.
RSA – Rotary Indexing Satellite Table Machines
RSA 1400
Machine width (mm)
Machine depth (mm)
Machine height (mm)
Max. parts height (mm)
Max. parts width (mm)
Rotary table diameter (mm)
Number of satellites
Satellite diameter (mm)
Blasting gun
Air nozzle Ø (mm)
Blasting nozzle Ø (mm)
Nozzle material
Air requirement per nozzle (m³/h)
Type
Positioning accuracy of rotary table (mm)
1.550
1.950
2.650
300
230
1.110
6, 8, 10, 12
110
2,0 – 6,0
8,0 – 14,0
Steel or boron carbide
15 – 140
Pressure blast or air injection
+/- 0,5 (with indexing motor)
Technical Data:
Date:
10/
12
15
RMT 8 RMT 20 RMT 40 RMT 70 RMT 100 RMT 120
80 200 400 700 1.000 1.200
200 500 1.000 1.800 3.000 4.000
220 300 350 450 550 600
6 8 10 10 12 15
1 x 7,5 1 x 11 1 x 30 1 x 30 2 x 30 2 x 37 H32 H32 H42 H42 H42 Ƴ400
1 x 30 2 x 30 Ƴ400 Ƴ400
4.600 5.500 5.500 6.600 7.200 7.700
1.450 1.700 2.000 2.400 2.600 3.100
2.200 2.000 2.700 3.300 3.600 4.000
Batch volume (dm³)
Max. batch weight (kg)
Max. part diameter (mm)
Material thickness of chamber lining (mm)
Turbines and power (kW)Standard
Turbines and power (kW) Optional
Machine height (mm)
Machine depth (mm)
Machine width (mm)
Technical Data:
The inside of MT´s barrel
The MT rotary barrel machines are ideal for shot blastingof extremely small parts which are too small to be blastedin a tumblast machine. However, MT machines are alsousable for blast cleaning of large bulky parts with weightsof up to 300 kg. A special rotary barrel design gives theMT series this distinctive character. The inside of the MT´sbarrel showing the unique pyramidal construction whichcauses the parts to move in a multi-tumbling action.Automatic loading and unloadingsystems enable the integration intoa continuous production line.
MT – Rotary Barrel Blast Machines
Pressure and pressurized injector blast cabinetsare ideal for blasting a wide variety of smallparts. The cabinets can be equipped withturntables, baskets, blast nozzles, pressureblasting systems, oscillators and other specialauxiliary blast units.
RSKI – Blast Cabinets
Machine width (mm)
Machine depth (mm)
Machine height (mm)
Blasting chamber width (mm)
Blasting chamber depth (mm)
Blasting chamber height (mm)
Blasting gun:
Air nozzle Ø (mm)
Blasting nozzle Ø (mm)
Nozzle material 1
Air requirement at 5 bar (m³/h)
Exhaust power (m³/h)
Fan power (kW)
Filter cleaning
Technical Data:
Date:
09/
14
1 Option2 also available as pressure vessel14
Date:
02/
14
RSKI 700 RSKI 1000 2 RSKI 1400 2
1.067 1.359 1.767 1.698 1.932 1.926
1.708 1.738 1.780
690 990 1.390
750 1.000 1.070
600 710 740
SPI 28 SPI 38 SPI 38
2,0 – 3,0 3,0 – 6,0 3,0 – 6,0
6,5 8,0 – 14 8,0 – 14
ceramic/boron carbide steel/boron carbide steel/boron carbide
13 – 30 30 – 120 30 – 120
150 300 600
0,25 0,55 0,75
automatic
17
Applications for this amazing, high performance shot blast systemwith one-arm robot include deburring, shot peening, and surfacecleaning of large-sized delicate components. Compared withconventional shot-blasting systems, the RROB systems offer veryshort time cycles with absolute process reliability and repeatabilityblast results. Precise horizontal and rotary parts movement by the patented gripper provides a uniform finish and complete removal of the blast media.RROB systems are ideal for integration into automated productionlines or manufacturing cells.
RROB – Roboblaster
RWK – Oscillating Chamber Systems
The REDL system allows the fully automaticblast cleaning of steel bars with round, quad-ratic and hexagonal profiles and can be eas-ily integrated into the overall manufacturingprocess. Depending on the parts, the pro-cessing speed can be adjusted from 12 to 60 m/min. The steel bars are guided on special transport rollers made from hardened tool steel. Special pressure rollers prevent slippage of „light weight“ components on the transport rollers. Each of the 3 blast chambers is equipped with 2 turbines offset by 60° and placed at a right angle to the transport direction so that the blast stream hits the bars at a 90° angle.
RKL – Billet Shot Blast MachineBillets, relatively short, heavy steel bars with a quadratic profile are usually made in continuous casting or hot roll lines. After production their surface finish must comply with at least grade SA 2, i.e. the surface must be practically free of rust and scale.This blast system allows the derusting and descaling of billets with cross-sectionaldimensions of max. 180 x 180 mm at cycle times of 20 seconds. Equipped with8 Long Life high performance turbines and 2 blast media recycling & classificationsystems, this blast machine can run at processing speeds of up to 90 m/min.
This versatile shot blast system was developed to meet highperformance blast requirements, and can be used for a widevariety of applications, especially for „rotation-symmetrical”components. This dual chamber system allows for the largestpossible handling space when loading and unloading parts.The advantage of this shot blast system is that partscan be safely loaded and unloaded in theopen chamber, while other componentsare being blasted.
REDL – Continuous Feed Shot Blast Machine
16
Shot peening is an important and essential process forimproving component fatigue life in many industrial sectors,primarily in the aerospace and automotive industries.Drive components (i.e. gears) are often subjected to the shotpeening process in order to induce compressive stresses,which considerably reduces the risk of fatigue cracksduring their operation. The service life of many componentssuch as gearbox components, drive andcrank shafts, springs, turbine blades andturbine components in general and manyothers can be extended multiple timeswith shot peening.
Shotpeening
1918
The wet blasting process is used for surface improve-ment, cleaning, stripping and shot peening of delicate, high-precision components. The main advantages are that no dust is created, the ability to use very fine abrasives, the reduced media fragmentation due to the water film (ideal for shot peening using with glass beads) and the reduced risk of inclusions (especially on soft metal) as water has a cleaning effect. Wet blasting is also used for blast cleaning parts partially covered with grease or oil.
High pressure water jet systems blast with pure water at a pressure of up to 60000 psi. This water jet is pro-jected onto the component to be treated by one or mul-tiple nozzles mounted on a rotating nozzle holder. The rotation of the nozzle(s) generates a milling or grinding effect on the parts. This is a „soft” method to treat parts from which tenacious, very hard coatings have to be removed.
Blasting with water has many advantages like no defor-mations and an insignificant abrasion at the component, the process water can be re-used in the closed circuit, no subsequent cleaning of the components necessary, no abrasive wear and anticorrosives may be utilised.
This technology has many applications in different industrial sectors, like removal of thermal coatings (e.g. plasma coatings) or paint stripping of a variety of dif-ferent components. Also, removal of residual slag from welding seams or removal of sand or ceramic residuals from castings.
Wet Blasting
High Pressure Water Jet Systems
This continuous blast machine with special – skewed roller --parts transport allows the comprehensive and uniform shot blast treatment of tubes and round bars in a continuous pro-cess. Ideal for integration into a continuous production line.
RDR – Tube and Bar Blasting Machines
21
Automation
Based on the design of the overhead rail blast system RHBE 40/50 the Rösler engineers developed a tailor made concept that includes a split elevator. Other design features are the small foundation pit and the fastening directly to the building floor. This allows the operator to enter the shot blast machine from floor level without any steps. The RHBE allows single piece as well as batch processing of parts with a max. diam-eter of 4,000 mm, a height of 3,000 mm and a totalweight of 15 t.
The RDT satellite rotary table shot blast machines are equipped with high performance turbines and allow the shot blasting (e.g. shot peening) of the parts in different positions. The placement of the turbines is such that the blast stream reaches all critical surface areas with the same intensity. Due to the compact design of these blast systems the distance between turbines and the processed parts is very short resulting in very intensive shot blast process.
Special roller conveyor shot blast systems were developed for the blast cleaning of complex welding constructions. To reach all areas, including interior and frontal areas, the turbines are placed on the blast chamber at a right angle to the transport direction forming two circles. In addition, the turbines of the first „circle” are tilted towards the transport direction, and the turbines of the second „circle” are tilted against the transport direction. The resulting blast pattern allows all-around blast coverage of the most complex welding constructions.
Deflashing Machines
Deflashing of Lead Frames
The high-performance SAB series is equipped with2–8 turbines and suitable for the continuous orindexing high-volume automatic deflashing of small tolarge-sized, especially delicate, thermoset components.Typical applications are the deflashing of componentsmade from unsaturated polyester moulding compounds,like control panels, etc.
SAB – Through-Feed Deflashing Machines
In addition to the standard range of machines, Rösleralso designs and builds custom made systems forspecial applications, such as deflashing machinesfor lead frames with automatic load, unloadand restack systems.
For heavy duty operation, usually found in foundries and forge shops, Rösler developed the RMBC 10.3 tumblast machine. This powerful shot blast system allows the blast cleaning of, for example, forged parts weighing up to 200 kg in batch volumes of 1,000 l and total batch weights of 3,000 kg. This system is extremely robust and due to its high blast intensity very productive.The blast chamber is lined with manganese steel to prevent premature wear.
20
Test Centers worldwide
Conservation Lines
Complete preservation lines with pre-heating, shotblastingsystem, patented painting line and dryer from a singlesource.
Test Centers and ServiceFinding a better way… a commitment to our customers
For Rösler service is not just an empty promise
Aero Engine/Airframe Preparation and Finishing
Special processes for surface treatment suchas shot peening, paint stripping, water-jet cleaning,peen forming.
Throughout our worldwide organization we adhere to strictquality control procedures. This applies especially to our testcenters where we develop process solutions for all kinds ofsurface finishing problems. Each branch of the Rösler groupfeatures its own test centre equipped with the latest Röslerfinishing equipment. This equipment is utilized exclusivelyfor processing trials with our customer’s sample parts.
We would like to draw your attention to other publications for special machines and processes.
Rösler Special Surface Finishing Solutions
Professional advice, short turn-around times and prompt and reliable service: Rösler offers single-source surface finishing solutions, worldwide!
4 Installation and training Machine installations and operator training are performed by our team of highly skilled and experienced service engineers.
4 In-House Manufacturing In line with our corporate philosophy to be a true „single source” supplier, Rosler engineers and manufactures all equipment components like vibratory motors; load/unload systems, control panels, welding constructions, laser cut parts, etc., in-house.
4 Spare parts service for all recognized shot blast systems Surface finishing equipment generally is subject to a considerable amount of wear. For this reason preventive maintenance and prompt supply of spare parts are a key requirement for any surface finishing installation. Rösler maintains a complete inventory of spare parts in every branch, ensuring local supply and fast availability, be it wire mesh belts, turbines, pressure vessels or any kind of nozzles, etc. To minimize downtime, parts are either delivered and installed by our own field service personnel or shipped to our customer’s location overnight. 4 Maintenance and repair service Rösler maintains a well trained staff of professional field service engineers providing prompt, reliable maintenance and repair service as well as overhaul of your older equipment.
2322
www.rosler.comF
A
ZA
D D GB
E I NL
CH USA BR
D
USA
F
I
CH
GB
E
NL
B
A
RO
RUS
BR
ZA
CN
IND
RÖSLER Oberflächentechnik GmbH · Werk Memmelsdorf Vorstadt 1 · D-96190 Untermerzbach Tel.: +49/9533/924-0 · Fax: +49/9533/924-300 · [email protected]
RÖSLER Oberflächentechnik GmbH · Werk Hausen Hausen 1 · D-96231 Bad Staffelstein Tel.: +49/9533/924-0 · Fax: +49/9533/924-300 · [email protected]
RÖSLER Metal Finishing USA, L.L.C. 1551 Denso Road · USA-Battle Creek · MI 49037 Tel.: +1/269/4413000 · Fax: +1/269/4413001 · [email protected]
RÖSLER France Z.I. de la Fontaine d’Azon · CS 50513 – St. Clément · F-89105 Sens Cedex Tel.: +33/3/86647979 · Fax: +33/3/86655194 · [email protected]
RÖSLER Italiana S.r.l. Via Elio Vittorini 10/12 · I-20863 Concorezzo (MB) Tel.: +39/039/611521 · Fax: +39/039/6115232 · [email protected]
RÖSLER Schweiz AG Staffelbachstraße 189 · Postfach 81 · CH-5054 Kirchleerau Tel.: +41/62/7385500 · Fax: +41/62/7385580 · [email protected]
RÖSLER UK Unity Grove, School Lane · Knowsley Business Park · GB-Prescot, Merseyside L34 9GT Tel.: +44/151/4820444 · Fax: +44/151/4824400 · [email protected]
RÖSLER International GmbH & Co. KG Sucursal en España · Polg. Ind. Cova Solera C/Roma, 7 · E-08191 Rubí (Barcelona) Tel.: +34/93/5885585 · Fax: +34/93/5883209 · [email protected]
RÖSLER Benelux B.V. Reggestraat 18 · NL-5347 JG Oss · Postbus 829 · NL-5340 AV Oss Tel.: +31/412/646600 · Fax: +31/412/646046 · [email protected]
RÖSLER Benelux B.V. Avenue de Ramelot 6 · Zoning Industriel · B-1480 Tubize (Saintes) Tel.: +32/2/3610200 · Fax: +32/2/3612831 · [email protected]
RÖSLER Oberflächentechnik GmbH Hetmanekgasse 15 · A-1230 Wien Tel.: +43/1/6985180-0 · Fax: +43/1/6985182 · [email protected]
RÖSLER Romania SRL Str. Horia Closca si Crisan 17-19 · RO -075100 Otopeni/ILFOV Tel.: +40/21/352 4416 · Fax: +40/21/352 4935 · [email protected]
RÖSLER Russland Borovaya Str. 7, bldg. 4, office 107 · 111020 Moscow Tel. / Fax: +7 / 495 / 247 55 80 · +7 / 495 / 505 23 15 · [email protected]
RÖSLER Otec do Brasil LTDA Estrada dos Galdinos, 35 · 06710-400 - Jd. Barbacena · Cotia - SP - Brasil Tel./Fax: +55/11/4612-3844 · [email protected]
RÖSLER S.A. Surface Technologies P.O. Box 7949 · 66 Regency Drive · Route 21 Corporate Park · Irene Ext. 31 · ZA-0046 Centurion Tel.: +27/12/345 2215 · Fax: +27/12/345 3731 · [email protected]
RÖSLER – BEIJING Office 11N, Tower A, Beijing Fu Hua Mansion · No. 8, Chaoyangmen North Avenue Dong Cheng District · Beijing 100027 P.R. China Tel.: +86/10/6554 73 86 · +86/10/6554 73 89 · Fax: +86/10/6554 73 87 · [email protected]
RÖSLER SurfaceTech Pvt. Ltd. No.9, I Main Road, M.L.A Layout · R.T. Nagar · IND-Bangalore 560 032 Tel.: +91/80 23534445 · Fax: +91/80 23339165 · [email protected]
RÖSLER Oberflächentechnik GmbH · www.rosler.com
Surface Finishing · Shot Blasting · Engineering · Environmental Technologies
• and more than 60 representations worldwide
Publ
.-Nr.
GB.
174.
19 –
Spe
cific
atio
ns a
re s
ubje
ct to
cha
nge
with
out n
otic
e.