1
A B C Small scale LED in-grade luminaires · STAINLESS STEEL LED location luminaires and floodlights. LED technology is characterized by the following features: • Long life • No maintenance • Low energy consumption • Color stability • Low surface temperature All LED luminaires on this double page require the use of a remote 24V DC driver to operate the LEDs. The driver is an accessory and must be ordered separately. A foundation must be supplied by the customer. These luminaires are designed to bear pressure loads up to 4400 lbs. from vehicles with pneumatic tires. The luminaires must not be used for traffic lanes where they are subject to horizontal pressure from vehicles braking, accelerating and changing direction. BEGA can supply you with suitable LED replacement modules for up to 20 years after the purchase of LED luminaires – see page 407. Further LED technical data, e.g. luminous flux, CRI and dimming are provided on the individual luminaire specification sheets, available at www.bega-us.com. Location luminaire · white safety glass square round Lamp A B C 7127 LED* 7027 LED* 1.1 W LED 3 1 3 ⁄ 4 2 1 ⁄ 2 7128 LED* 7028 LED* 2.2 W LED 4 5 ⁄ 8 3 1 ⁄ 8 3 7 ⁄ 8 Symmetrical floodlight · clear safety glass square round Lamp b A B C 7117 LED* 7017 LED* 2.3 W LED 26° 3 1 3 ⁄ 4 2 1 ⁄ 2 7118 LED* 7018 LED* 4.3 W LED 23° 4 5 ⁄ 8 3 1 ⁄ 8 3 7 ⁄ 8 Asymmetrical floodlight · clear safety glass square round Lamp b A B C 7119 LED* 7019 LED* 4.3 W LED 38°/ 35° 4 5 ⁄ 8 3 1 ⁄ 8 3 7 ⁄ 8 b = Beam angle * Remote driver required LED in-grade luminaires · square or round faceplate Stainless steel housing and faceplate White or clear safety glass Floodlights with reflectors made of pure anodized aluminum LEDs require a remote 24 V DC Class 2 power supply (see page 403) Color temperature 4000 K (for 3000 K add suffix K3) Pre-wired with 10 feet of 12 AWG wire and a waterproof cable gland entry into housing Finish: #4 brushed stainless steel UL or CSA listed, suitable for wet locations (see page 409) Protection class IP 67 207 206
