Small Wheel Loader Application Chart

1. Wear Safety Equipment.2. Keep hands and feet clear.3. Beware of flying objects.

See back for Pin Removal / Insertion specifications and recommended Slide Sledge® tool kit.

Prior to removing any pins or parts refer to Manufacturers Service manual for proper procedures for securing and stabilizing equipment.

12

3

4

5

67

8

910

1112

1314

123456789

1011121314

Bucket Teeth / TipsLoader Frame to BucketTilt Link to Bucket PinRod End Tilt CylinderTilt Link to Loader FrameLift Cylinder PinLoader Frame to Main Frame PinTilt Cylinder PinTire BeadWheel Stud RemoverRace Wheel BearingsSteering Cylinder to Frame AssemblyArticulation PinSteering Pin to Frame

MACHINE MODELSCAT 928GzHYUNDAI HL740-7, HL740XTD-7KAWASAKI 65TMV, 65ZV

Operating Weight: 23,500 - 27,150 lb.

The following removal and insertion tips are manufacturer recommendations for this model. Other model wheel loaders may use similar tips and tools for similar removals. Consult with manufacturer for specific models and uses.

Removal and installation should only be performed on pins that have been properly serviced and maintained.

Tool/Tip Description Part##1

#2

#3

#4

#5

#6

#7

#8

#9

#10

#11

#12

#13

#14

R/I ToolR/I TipR/I TipR/I ToolR/I TipR/I ToolR/I TipR/I ToolR/I TipR/I ToolR/I TipR/I ToolR/I TipR/I ToolR/I TipR/I ToolR/I TipR/I ToolR/I TipAccessoryR/I ToolR/I TipR/I ToolR/I TipR/I ToolR/I TipR/I ToolR/I TipR/I ToolR/I Tip

14 lb./30” Slide Sledge1/2” Ripper Tooth Pin Remover1/2” Ripper Tooth Pin Inserter13lb./46” Slide Sledge1 1/4” Pin Driver13lb./46” Slide Sledge2” Pin Driver13lb./46” Slide Sledge2” Pin Driver13lb./46” Slide Sledge2” Pin Driver13lb./46” Slide Sledge2” Pin Driver13lb./46” Slide Sledge2” Pin Driver13lb./46” Slide Sledge2” Pin Driver21lb./46” Slide SledgeSmall Tire Bead Breaker5 lb. Handle Weight14 lb./30” Slide Sledge2” Pin Driver9lb./30” Slide SledgeBushing/Bearing/Seal Plate Driver14 lb./30” Slide Sledge1 1/4” Pin Driver14 lb./30” Slide Sledge1 1/4” Pin Driver14 lb./30” Slide Sledge1 1/4” Pin Driver

211301213304213303211203213103211203213104211203213104211203213104211203213104211203213104211203213104211401213529

211808211301213104211103213525211301213103211301213103211301213103

Item

Recommended Tool Kit for Small Wheel LoadersProduct Part#9lb./30” Slide Sledge13 lb./46" Slide Sledge14lb./30” Slide Sledge21lb./46” Slide Sledge1 1/4” Pin Driver2” Pin Driver1/2” Bucket Tooth Remover1/2” Bucket Tooth InserterSmall Tire Bead BreakerBushing/Bearing/Seal Plate Driver5 lb. Handle Weight

211103211203211301211401213103213104213304213303213529213525211808

Small Wheel Loader Application ChartOperating Weight: 23,500 - 27 ,150 lb.