+ All Categories
Home > Documents > Smart Viewer QSG

Smart Viewer QSG

Date post: 10-Apr-2018
Category:
Upload: kupsky
View: 229 times
Download: 0 times
Share this document with a friend
6
SAMSUNG SECURITY • 2801 Trade Center Dr., Suite 120 • Carrollton, TX 75007 • PHONE (972)245-7353 • WWW.SAMSUNG-SECURITY.COM Smart Viewer V.3 Quick Start Guide  -Search -New Access -Backup -Adding DVR            v5.21.10
Transcript

8/8/2019 Smart Viewer QSG

http://slidepdf.com/reader/full/smart-viewer-qsg 1/6

SAMSUNG SECURITY • 2801 Trade Center Dr., Suite 120 • Carrollton, TX 75007 • PHONE (972)245-7353 • WWW.SAMSUNG-SECURITY.COM

Smart Viewer V.3

Quick Start Guide 

-Search-New Access

-Backup-Adding DVR

 

      

   

v5.21.10

8/8/2019 Smart Viewer QSG

http://slidepdf.com/reader/full/smart-viewer-qsg 2/6

SAMSUNG SECURITY • 2801 Trade Center Dr., Suite 120 • Carrollton, TX 75007 • PHONE (972)245-7353 • WWW.SAMSUNG-SECURITY.COM

How to use the Search option in Smart Viewer 3

1. Log into the software

a. Default log in :

• ADMIN

• 4321

2. Once the software is open, connect to your DVR.

3. click on the search button indicated on the right side of the GUI next to the LIVE tab:

 4. Once the Search Screen is open, it shows the screen below.

 

 

 

 

 

 

 

 

 

 

A. This is your calendar: Dates shaded in Blue represent data.

B-C   Your timeline is broken up into a 24 hour period. You can change the time of playback by either manipulating the boxes(B) or moving the blue vertical bar (C) to the desired time you wish to playback. The traditional play, pause, Fast

Forward, Rewind, buttons are below for playback.

D. You may increase the size of the timeline using the + or – buttons and use the slider to set the vertical time bar, to a

more accurate setting. You will see a small arrow appear next to the + icon if you increase the size. This moves to the

next hour.

 

NOTE: Only 4 cameras may be played back simultaneously

 

 

 

 

Select the device you wish to connectto and press connect button

8/8/2019 Smart Viewer QSG

http://slidepdf.com/reader/full/smart-viewer-qsg 3/6

SAMSUNG SECURITY • 2801 Trade Center Dr., Suite 120 • Carrollton, TX 75007 • PHONE (972)245-7353 • WWW.SAMSUNG-SECURITY.COM

How to use the backup option in Smart Viewer 3

1. Log into the software

a. Default log in :

• ADMIN

• 4321

2. Once the software is open, connect to your DVR.

3. Click on the Search Tab indicated on the right side of the GUI next to the LIVE tab:

 

 **You are only able to backup 1 camera at a time

1. Choose the Camera you want backup from the drop down box.

2. Enter your START TIME-END TIME and choose where you want to save the

file on your computer.

3. Press Start to Begin the Backup process.

4. Once the backup is complete, you will have an icon in the location where you

saved the file.

(C:\Program Files\Samsung\SmartViewer3.0\Record)

5. Double-click that icon to bring up the backup

viewer.

 

NOTE: At this time, only proprietary backup viewer

can be performed.

 

Select the device you wish to connectto and press connect button

8/8/2019 Smart Viewer QSG

http://slidepdf.com/reader/full/smart-viewer-qsg 4/6

SAMSUNG SECURITY • 2801 Trade Center Dr., Suite 120 • Carrollton, TX 75007 • PHONE (972)245-7353 • WWW.SAMSUNG-SECURITY.COM

How to access the menu of the DVR in Smart Viewer 3

1. Log into the software

1. Default log in :

• ADMIN

• 4321

2. Once the software is open, connect to your DVR.

3. Click on the setup button indicated on the right side of the GUI next to the LIVE tab:

 

4. You will see the following screen.

 

** The DVR you are connected to should already be listed under Device on the left side

of the window. (Other devices are connected they will show but will be grayed out)

 5. Click on the Device menu setup button on the bottom of the screen to access the

menu of the DVR.

 

Complete – You should have access to your DVR menu

 

 

 

 

 

 

 

 

 

 

 

 

 

  

 

 

 

 

 

 

 

 

 

 

Select the device you wish to connectto and press connect button

8/8/2019 Smart Viewer QSG

http://slidepdf.com/reader/full/smart-viewer-qsg 5/6

SAMSUNG SECURITY • 2801 Trade Center Dr., Suite 120 • Carrollton, TX 75007 • PHONE (972)245-7353 • WWW.SAMSUNG-SECURITY.COM

How to add a DVR to Smart Viewer 3

1. Log into the software

a.    Default log in :

• ADMIN

• 4321

2. Click on the setup button indicated on the right side of the GUI next to the LIVE tab:

 

3. You will see the following screen.

 

4. To add a DVR to the device list, click on

device register button. (represented by

the arrow) An Add Device box (shown below)

appears. From the drop down list, first choose the

model of your unit, then the Address Type. Enter

the static IP address you assigned the unit locally,

(or your remote WAN address once port forwarding

has been done), the port number, the ID and the

Password of the DVR.

 

 

 

 

 

 

 

 

 

 

5. Run a connection test to verify if the connection is good.

6. Once verified, click register.

7. Close the screen to save.

8/8/2019 Smart Viewer QSG

http://slidepdf.com/reader/full/smart-viewer-qsg 6/6

SAMSUNG SECURITY • 2801 Trade Center Dr., Suite 120 • Carrollton, TX 75007 • PHONE (972)245-7353 • WWW.SAMSUNG-SECURITY.COM

Optional:

The Group box is optional if you want to connect to more than 1 DVR at a time.

To do this, register all your DVR ʼs by repeating steps 1-5, and then select the DVR from the device list and press the

arrow in the middle of the boxes to move the DVR ʼs to the group:• You are limited to 4 devices per group.

To connect once on the main GUI in the drop down list, choose the DVR or group and press the connect button, and

then drag your cameras to the camera cells:

 

 

 For additional assistance or support please call

Samsung Security Technical Support

Monday through Friday 8am to 7pm CST

(888) 595-2288 extension 2852

 

 

For after hours support call

(972) 693-6402

 

 

You can always reach us at

[email protected] 


Recommended